Option Level, Option Code and Option Sequence in Benefit Program

Hello All,
Hope you all are doing good.
I am using PS 9.0 HRMS (payroll, ben admin, core hr), PT - 849, Oracle 10g. I am defining a new benefit program while I was defining the program is not saving with out the following fields"
Option Level, Option Code and Option Sequence in Benefit Program.
I am just wondering what is the purpose of these codes what are the values we need to enter for these codes.
Thanks in advance!

Duplicate
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/VISA-Hex-0xBFFF0015-Timeout-expired-before-op...

Similar Messages

Product Hierarchy level 2 code and description details

Hi BW Experts,
In our report we want to display Material wise 'Product Hierarchy level 3 code and level 2 description.
Here, we have loaded material master hierarchy data to BW but we are not able to get the level 3 code and level 2 desc.
In R/3 side we can see product hierarchy level 3 code and level 2 description using transaction code.
Could some one help me how do we get these details.
Thanks in advance.
mahantesh

Folks,
Any solution?
Laks

Why is there no option to render as an image sequence?

I am using After effects cs6 and when i try to choose a format there is no option to save as an image sequence. This goes for any clip I try to render. The picture below is where I am having the problem, under the format tab. There are only about 10 options under the tab and image sequence is not one of them. Any help would be great.

Here's what I see in the Format drop-down list on a Mac. What do you see?

Levels and options that exist in SAP

Hi,
I'm an engineer in Telecoms specialing in 3G network but now wants to move to SAP.
What levels and options exist, I tried to look on the website and without a success
Please assist

There are options: you have to read and decide due to your tendency.
https://training.sap.com/tr/en/courses-and-curricula/business-objects-information-management
or
Courses & Curricula | BusinessObjects Business Intelligence
cheers,
Sarhan.

Does Anyone Knows How To Disable The "Check For Updates" Option in Adobe Edge Code and Reflow?

Does Anyone Knows How To Disable The "Check For Updates" Option in Adobe Edge Code and Reflow?
Thanks in Advance

I don't think there is a way for Edge Code. I'm not sure about Reflow.
Why don't you just upgrade? That will stop the notifications.
Randy

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Sever vs. Database Code, Server Options

I'm looking for some introductory as well advanced
Oracle or non-Oracle texts/tutorials on
1. Deciding how to split code to
- database strored code
- and application (Apex) code.
Advantages, disadvantages etc.
Especially, some description of database stored code execution.
2. methods of Apex installation.
What are the options for the servers
and what are the choice criteria.
Thank you very much,
Marios

Marcos,
Hmmm... You are asking interesting questions.
How many tiers can an APEX application have?
Well, this all depends on how you define tiers and whether or not you are talking physically or logically.
Physically APEX has three basic tiers; Browser, Application Server and Database, where 'Application Server' can be a number of solutions (Apache/Oracle HTTP Server and mod_plsql or the embeded PL/SQL gateway in Oracle 11g or Oracle XE). The reality of our physical Application Server tier is that it really just forwards requests from a browser into the APEX engine. So as Application Servers go, it's really, really light.
Logically things are a bit different.
Logically it might make sense to say that the APEX engine is the 'Application Server', even though it lives inside the database since its really the engine that runs our application logic.
Let's say that the browser is one tier (client/view) and the database is another tier (data/model). Those tiers are pretty straight forward.
Next comes the 'application logic' or controller tier. If we logically separate the storage of our data in the database (and it's a pretty good idea to do this physically too with different schemas and/or packages) from the application logic we can easily achieve a good model/view/controller architecture even if the controller and model tiers are both physically in the database.
So if the rendering of a data entry form is handled by the browser and the database holds the table that stores the data that form accepts, where should we put the business rules that will manipulate the data?
As Tyler suggested it's almost always a good idea to put the business rules inside the database. Let's say that some of the fields on our form are required. APEX allows you to make data entry fields required pretty easily, but if this wasn't enforced inside the database (with a NOT NULL column for instance) then another application (or even SQL/Plus for instance) might be able to put rows into the table with NULLs and break our business rule. There are many applications out there today that everybody was totally positive that no other application would ever be built against that are totally broken and/or have bad data because someone got around the application logic by building a bad application.
But also remember that as a development environment there's no reason why you couldn't call out to and/or consume web services, XML feeds, etc. from APEX. How you do this is up to you, but really, the sky is the limit.
Is there some sort of clearly separated 'application level'?
There can be if you want there to be. Certainly you can use an APEX workspace to hold your 'application level' information. Again as Tyler mentioned it's not a bad idea to put as much of this application level logic into reusable code libraries using potentially PL/SQL packages.
Is database stored PL/SQL code part of this 'application level'?
It certainly can be. Sometimes this can be a bit confusing, but there is really two 'sections' of PL/SQL code with APEX. The first is the actual APEX engine itself. The second is any PL/SQL code that results from using the wizards and/or PL/SQL code that you write directly. You should really keep the two separate. By default this is what APEX does with workspaces.
Hopefully that helps. If not, ask away...
Rich

Correct usage of select and option statements

Is it ok if I say this in my option statement?
<select name="XYZ" onchange="return valChange(this)">
<option <%=Selected%> value="100"><%=100%%></option>Or should the option tag just contani the variable names instead of values directly?
like this
<option <%=aTmpSelected%> value="<%=abc%>"><%=fslr%></option>where atmpselected contains selected,
abc contains 100,
and
fslr contains 100%,
as values?
Please specify using an example.
Thanks for your time.

Tutorial on how to use select elements:
http://w3schools.com/tags/tag_select.asp
Tutorial on how to use option elements:
http://w3schools.com/tags/tag_option.asp
Sandbox to test out your code:
http://w3schools.com/html/tryit.asp?filename=tryhtml_select2
The value attribute is the string that gets passed to the form when it's submitted. The text between the <option></option> tags is what gets displayed for that choice. You can use a conditional to decide if "selected" gets added to the html.

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

Hinding code with Optional Regions

I am getting an error:
HERE
I know why, it is because I have to use: <body
onload="load()" onunload="GUnload()"> in the line:
<body class="thrColFixHdr"
onload="P7_TMclass();P7_TMopen();load()"
onunload="GUnload()","P7_TMclass();P7_TMopen();MM_preloadImages('images/layout-images/clo se-tabs-over.gif')">
This is used to display a google map in my 'Location' page
but this is the only place I need that code and where the map does
not exist (all other pages) I get the error.
Is there any way of hiding part of that code in my template?
I have tried to have two versions of the line with and
without the map code in 'Optional Regions' but no luck.
Some expert advice greatly appreciated.
Cheers,
Richard

> 1. If I add:  to my template and make it true on the page with
the google map I get
> the
> Load() error on all other pages.
Yes - well, this is a problem with a template controlled
page. The body tag
is NOT editable. You *can* use an editable attribute on the
body tag for
the onload attribute, which would allow you to access the
values associated
with that attribute on each child page, but it's all-or-none
in the sense
that you would have to add the full text of that attribute on
each child
page (adding or subtracting the 'load()' call).
Are you using server scripting on these pages?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RICH POW" <[email protected]> wrote in
message
news:ful2gl$lqf$[email protected]..
> Thanks for the reply...
>
> I'm in a bit of a vicious circle here.
>
> 1. If I add:  to my template and make it true on the page with
the google map I get
> the
> Load() error on all other pages.
>
> 2. If I leave the script in I get a Null Value error on
all pages except
> the
> google map page.
>
> Do you know a way I can include that map just on that
page?
> Do you know how I can add the whole page with SSI or add
the <body
> onload="load()" onunload="GUnload()"> to the body tag
with an option
> region?
>
> Here is the map in it's simplest form:
>
http://adelantedesign.co.uk/websites/adelante/googlemap.html
>
> Thanks again for your time.
>
> Richard
>

Pass code unlock option no long available on my Iphone4

Please help. I can no longer see the pass code unlock option on my Iphone4. Although I realize the importance of security, this feature can become a nuisance when you have to continuously type in the pass code. I do not have Microsoft Exchange or is it tied into corporate email. My Iphone is for personal use only. This is extremely frustrated when driving and you need to type in the pass code in order to reach the phone pad. I am on version 4.3.5. With the focus on driving and texting, I am surprised Apple would run the risk of forcing someone to type a password while driving. Thank you.

Thank so much for the quick response. Took your advice and everything appears to be working!!!

When I try to down load any apps the screen shows -example you tube app can't down load this time. This is appearing every time on the screen and options are Done/reentry please do my favour.

When I try to down load any apps the screen shows -example you tube app can't down load this time. This is appearing every time on the screen and options are Done/reentry please do my favour.

This query seems to be related to Edge Code. you can get help from this forum.
Also EdgeCode doesn't have troubleshooting page but you can get help from Brackets trouble shooting page.

Remove option for Data Tracking and Drill Mode

Hi all
We have integrated a bunch of Webi reports into the SAP Portal. My question is now how to remove the options about Data Tracking and Drill Mode in the top right hand corner? I guess it is some special right we need to deny in the Access Level, we have defined. But if I deny data tracking and drilling in the Web Intelligence section of the Access Level, it has no effect.
Please assist.
Best regards,
Martin Søgaard

I, too, am perplexed by this change. Then again, I've been perplexed by most of the changes Apple has made to products/os in the last few years. I'm thinking that I may not only change browsers, but hardware/software also. It's issues like this that make me wonder if anyone on the Apple design team actually uses any of their products, or maybe they think we are all just too ignorant to be able to use a computer.
Making things simple to use shouldn't equate to removing advanced functionality, but it seems that's what Apple believes it to be.
Really disgusted now.
Thanks Apple.

Command line options / API Support to launch the sequence file

does teststand support any command line options / API Support to launch the sequence file and also populate the test run status. I want to explore the option of integrating the teststand with QC where I can launch the sequence from QC and results are sent back to QC.
Thanks in advance,
-Dilip

Hi Dilip,
Here are the command line options for TestStand v4.2.1:
Command Line Processing
Command line usage:
   seqedit.exe [<sequence file>]
               [/goto <location>]
               [/run <sequence> <sequence file>]
               [/runEntryPoint <entry point> <sequence file>]
               [/quit]
               [/setCurrentDir]
               [/useExisting]
               [<workspace file>]
      <location>: property object path to the item to display in the file
               Location examples:
                     TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"Power On\"]"
                     TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"ID#:JifH4ODTf0y1z7bJne0G7D\"]"
                     TestExec.exe c:\example.seq /goto "Seq[1].Main[4].TS.LoadOpt"
      <sequence file>: sequence file to open
      <sequence>:       sequence to run
      <entry point>:    entry point, such as Single Pass or Test UUTs, to run
      <workspace file>: workspace file to open
   You may specify multiple sequence files, sequences, and entry points.
   Quotes are required for arguments that contain a space, such as
   "Test UUTs" and "C:\My Documents\Test Sequence.seq"
I don't believe you'll get a return status of the executed sequence from the editor on close; but you could design your sequence to write the status to a file and then read that by your QC application.
-Jack

10GB Ethernet options for px4-300r and px12-350r

Hello,
I see that third party vendors are listing a 10GB 2-port Ethernet upgrade for the px12-400r and px12-450r. Will this also work in a px4-300r or the px12-350r? Both units have the optional pci-express slots (1 on the px4, 3 on the px12) so it looks like the hardware is there.
Any thoughts? I'd love to be able to put that kind of bandwidth in my px4 and px12 systems.
Thank you,
--Jeff

I just chatted with one of our level 3 agents and he said that the 10GB cards should work with the px rackmount devices. He did not have a part number though since it is fairly new and he had actually already asked our head office for it but is still waiting to hear back from them. I would recommend calling in if you need the part number or possibly asking the retailer/reseller that you bought the device from if they have it.
You can call this number as it is specific to our customers with px12 devices: 866-856-9898
or try our main tech support center: North America Contact Page — Network Storage
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Option Level, Option Code and Option Sequence in Benefit Program

Similar Messages

Maybe you are looking for