Option "Native VLAN ID" doesn't show up

Hi all:
I'm configuring several AP in a WLC 5508. All of them are in FlexConnect with VLAN Mapping and the most are 1131 and I can configure Native VLAN and VLAN mapping option. However, I just added a 2702 AP to the WLC and I found out the "Native VLAN ID" option under FlexConnect tab is missing (attach screenshoot). Is it because of the model of the AP or config issue?.
As you can see in the screenshoot, AP is in a FlexConnect Group. In it I can't configure Native VLAN for the APs.
Thanks all
Francisco

This issue is bug# CSCus64073 - 1700/2700 APs native vlan
field missing in Flex tab
•        The workaround is to “untick vlan support (in the Advanced tab) and tick it back,
then field will show again” 
•        If this is unsuccessful, configure the native vlan through the cli with the
following commands: 
-         config ap disable ap <AP_Name>
-         config ap flexconnect vlan native 8 <AP_Name>
-         config ap enable ap <AP_Name>
-         show ap config general <AP_Name> should show correct native vlan

Similar Messages

  • Whats difference between native vlan and pvid

                       whats difference between native vlan and pvid ?

    Hi,
    a port VLAN ID is the assigned VLAN of an access-port.
    The native VLAN is used in a trunk. A trunk is used to connect another switch or a device which belongs to more than 1 VLAN. Since a standard ethernet frame doesn't provide a field to distinguish VLANs, a special field is inserted, this is called "tagging". Nevertheless, frames belonging to the native VLAN  are transmitted without such a tag (in other words: the ethernet frames are not modified). In this way, traffic forwaring is possible in the native VLAN even when the trunk is not working  correctly.
    In theory, when you would connect a trunkport from one switch to an accessport of another, communication for the native VLAN would be possible. In such a scenario, the native VLAN-ID doesn't have to match the PVID. Hope, this isn't to confusing.
    You can find more details in discussion https://learningnetwork.cisco.com/thread/8721#39225
    Regards,
    Rolf

  • HT5312 The option to reset security information tab isn't showing up for me, is there I way that I can make it show up. I have a rescue email address and it still doesn't show up. Please help!

    The option to reset my security information tab is not available for me, I have a rescue email address in place and it still doesn't show up. Please help!

    You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
    (96335)

  • MSI GT 70 ONC: Stereoscopic 3D option doesn't show up in the NVidiaControl panel

    Hi,
    I have MSI GT 70 ONC Laptop with NVidia 670M (2GB) graphics card. I also have Sony Bravia 3D TV.
    I can play 3d movies on laptop and can watch them on my 3d TV using HDMI cable fine although my laptop doesn't have 3d display.
    I am trying to use my laptop which doesn't have 3D display but has Graphics card which supports 3D to play 3d games and see them on my 3D TV.
    I checked online and found out that I need to change "Stereoscopic 3D" settings in NVidia control panel but Stereoscopic 3D option doesn't show up in the control panel. Very few options are there. I have updated drivers to the latest level but still can't see "Stereoscopic 3D" option in NVidia control panel. So will you be able to help me out what I can do to see the option? Thanks in advance.

    I have got an gs70. Exactly the same problem. Unfortunately this hdmi outputs are connected for the intel graphics cards. And intel does not support 3d.
    I was actually very angry with MSI. Because they do not mention in the description. They promot just the gtx card. And forgot to mention about the hdmi connection.
     Forget the 3d tv. Or you can buy an external mini pci-e graphics card adaptor.
    search in google for : EXP GDC Beast Laptop External Independent Video Card Dock

  • TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
    According to Fly150 in another discussion, this is a workaround - for the time being.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store.

  • Firefox doesn't show headers on websites or mail options such as fonts, etc

    Firefox is the only browser that I'm having these problems with. They are as follows:
    In the compose e-mail block of my yahoo, it doesn't show the options for fonts, size of fonts, backgrounds, etc. It also won't let me change the color of the fonts. It just shows blank boxes. Not only can't I change things in individual e-mails that I compose, I can't change my e-mail options.
    In the customize backgrounds and colors for my yahoo page, it doesn't let me change colors or themes.
    In websites, it doesn't show the headers of the website, including name of website and selections. It's blank. The body of the website shows up. Just not the header.
    Is there a way restore Firefox to it's original state? If so, how do I do this? Or do I need to uninstall it and reinstall it? I didn't do this when I first started using Firefox.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • My ipod touch 4g doesn't show option for os update in setting-general page. Can i update it via itunes by connecting it to computer?

    My ipod touch 4g doesn't show option for ios update in setting-general page. Can i update it via itunes by connecting it to computer?

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode ue one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I am trying to set up ICloud on my Ipad.  ICloud doesn't show up as an option in my settings.  Help!  I want to sync all of my content from my IMac to My Ipad

    I am trying to set up ICloud on my Ipad.  ICloud doesn't show up as an option in my settings.  Help!  I want to sync all of my content from my IMac to My Ipad

    Try rebooting the device. It should be in Settings right under General. You may need to go to Settings<General<Reset<Reset All Settings (don't erase data) and setup as a new device. The iCloud login should appear during this step. Just keep setting it up, then go back to settings and see if the iCloud tab appears.

  • HT1386 how do I sync manually, with new update it doesn't show option?

    How do I sync manually, with new update it doesn't show the option?

    For iTunes>Help>iTunes Help>Sync you device>Setup syncing
    Sync your device manually
    If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
    You can manually sync music, movies, TV shows, podcasts, and iTunes U lessons. You can’t manually sync photos and info (contacts, calendars, bookmarks, and so on).
    Connect your iPod, iPhone, or iPad to your computer and select your device.
    Click the Summary button and select “Manually manage music and videos” (below Options).
    Click the On This Device button.
    Click Add To on the right side of the iTunes window.
    Drag items from the left side of the iTunes window to the pane on the right. To add other types of content, choose a category from the Library pop-up menu.
    Click Done.
    If you use automatic syncing, you can also add items to your device by dragging. To drag items to an automatically synced device, follow the instructions above, but skip step 2.
    The picture from the iTunes Help do not display.

  • {Solved} Windows 8.1 Doesn't show users when windows loads, only shows options for accessibility and shutdown/restart

    I just recently come into a problem on a dell all-in-one, where the computer has been updated to windows 8.1 and doesn't show users, only a blue screen with the power options and accessibility options and here is how I fixed it.
    Note: you will lose your desktop apps
    1. Turn on computer and let load to the blue screen with the options
    2. While holding down shift click on the power button and then click restart (while still holding shift)
    3. Hold shift until the advanced recovery options comes up
    4. click on Troubleshoot>Refresh your PC
    5.Enter password for user account
    6. Let it do its magic

    Hi,
    Thanks for your sharing. And it will benifit others who encounter the similar issue as yours.
    This issue can be caused by corrupted winlogon components.
    You are right to refresh to repair the system.
    Kate Li
    TechNet Community Support

  • Answer security questions option doesn't show up when reset password

    I restore my iphone 5s then i can't active it because of activation lock.
    I don't remember my apple id password, so i go to reset it but the answer security questions option doesn't show up (my apple id is [email protected] with no backup email).
    how can i reset my password now.

    Hey dunglv,
    It sounds like have tried resetting your password but do not have the security question option and do not have a rescue email account setup. Use the following article to contact Apple for assistance with your account:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • The GPS Option Doesn't Show Up at All

    As Above. The GPS option every guide has been talking about doesn't show up under options or advanced settings at all. The closest thing i get to GPS is Location settings and it is not doing much.
    I'm using a Verizon set. I'm also using it out of the USA currently.
    Help please?

    Anyone can help me..? please.. i really wanna get this issue sorted out... Instead of the GPS option everyone else gets i'm getting a LOCATION SETTINGS options and it does nothing...

  • HT4796 "Mail Accounts" doesn't show up as option to choose to migrate from XP

    I am attempting to migrate files from a WinXP computer to a Mac Mini running Mountain Lion. Almost all files transferred successfully, but it doesn't appear that the Outlook email transferred. In fact "Mail Accounts" doesn't show up as an option to choose in the migration screen. I have done the migration successfully to three other computers, but they were running Lion. Any ideas?

    Try rebooting the device. It should be in Settings right under General. You may need to go to Settings<General<Reset<Reset All Settings (don't erase data) and setup as a new device. The iCloud login should appear during this step. Just keep setting it up, then go back to settings and see if the iCloud tab appears.

  • Running elements organizer 12 on mavericks can't import iphoto files since the option doesn't show up

    Running Mavericks 10.9.3 with iphoto 9 loaded Elements 12 and went to import iphoto files - but the import option doesn't some "from iphoto" and the file/getphotos and videos/from iphoto doesn't show - what is the issue

    I'm not sure exactly what you're saying, but you probably don't want to use "from iphoto" anyway. That's only for when you want to import your entire iphoto library (like when you decide you want to use organizer instead).
    The first question is what  are you trying to do? Do you just want to open photos from iphoto into the PSE editor or do you want to import them into the organizer for something?

  • RMBP can Airplay content from iTunes but mirroring option doesn't show up

    I have the Late 2013 rMBP running 10.10.1. I also have the latest Apple TV which is working fine with my iOS devices.
    The Airplay option shows up in iTunes and works fine in there but the mirroring option doesn't show up in the Menu Bar. I have checked the "show mirroring options in menu bar when available".
    I haven't got another Mac to test the Apple TV yet.
    I'm not sure what else to do.
    Thanks

    If the iPod does not appear in iTunes:
    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for