Option of turing on or off mms setting is not coming in my iphone 5s

option of turning on or off mms setting is not coming in my iPhone

This toggle should be under Settings>Messages. From there you can scroll down and should find it. If not, does your carrier support SMS and MMS?

Similar Messages

Data roaming setting does not show up on iPhone 4S

My wife got a new iPhone 4S from Verizon a few weeks and and she's been using it with no probolems since then. Yesterday we crossed the board into Canada and I tried to turn "Data Roaming" off on her phone but the "Data Roaming" setting does not exist in Settings->General->Network. On my Verizon iPhoen 4S it has the optios "Voice Roaming" and "Data Roaming" but on hers only "Voice Roaming".
I was able to turn off all cellular data but that's actually inconvenient because we're right on the border and often go in an out of US cell converage areas, so with data roaming off it lets me use data whenever there's a US cell signal and otherwise prevents me from using data on a Canadian signal, but with all cellular data off, you have to constantly be toggling the setting when you think you go from a cell tower in the Canada to one in the US.
Does anybody have any idea why the "Data Roaming" setting does not exist on her phone yet it does on mine? Both phones are running iOS 5.0.1.

On your wife's phone: Dial *228. When prompted, select 2 to update her roaming capabilities. When complete, you will hear a confirmation message. In about a minute, you will also see an alert that your service update is complete. See if doing that fixes things.

The ringer setting is not working on my iPhone 4s

My iPhone fell into my pond for less than 10 secs. I pulled it out in time to dry it off and shake some of the water out. I made sure the screen was still working and sounds were functioning then I turned it off and left it in a bag or rice for 24 hrs. The next day I took it out and it was working fine. Now suddenly today, the ringer setting is not working. When I go into settings>sounds I press on ringtone and it seems to be working. Speakers are fine and when someone calls I have no problem. I can also hear the ringtones. But when someone txts me or when I get notifications it doesn't have any sound? The alarms don't work and the sounds in apps don't work. When I put the charger in, it doesn't make a sound. It vibrates only except when someone calls me... My headphone jack seems to be working fine because I can hear everything even the text tones and sounds in apps... What should I do? How much will I have to pay to get someone at apple to fix this problem? I'm assuming there is still some moisture in the phone maybe? It was working for a week until today I'm not planing to upgade to the iPhone 5 anytime soon. Btw, the volume buttons do work it's just when I press on it, it doesn't show the bars when you press up or down... it's just blank.

If it's physically stuck it might be best to bring it into the Apple store at George Street Sydney.
Set up an appointment with the Apple store via the website http://www.apple.com/au/support/contact/

Where in gods name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but thats is. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC

Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
Please find the attachment of a screen cap of my itunes.
If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.

Welcome to the Apple Community.

In setting up ICloud on my new Iphone 4s, I lost most of my calendar events in my Outlook 7 calendar. I used to have MobileMe but in the set-up process was told to turn that off which I did but now most of my calendar events have disappeared

In setting up ICloud on my new Iphone 4s, I lost most of my calendar events in my Outlook 7 calendar in my Vista PC. I used to have MobileMe but in the set-up process was told to turn that off, which I did but now most of my calendar events have disappeared after syncing with ICloud. How can I get my missing calendar events back? They are still on my 3Gs Iphone which I have not yet updated to IOS5.
Thanks for any help.
marybpod

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Since I downloaded the recent software update, my battery charge lasts about 1/10 as long. Is there a new option that I can turn off that might be draining my charge?

Since I downloaded the recent software update, my battery charge lasts about 1/10 as long. Is there a new option that I can turn off that might be draining my charge?

There are just too many settings and combinations of apps and settings that affect battery use. Look through past posts for references to battery and read through them to get ideas. Some recent ones.. Turn down brightness and set Bluetooth off.

No MMS Setting in my Iphone4

I already upgraded my Iphone4 iOS from 4.1 to 4.3.3.
But, I noticed that some of the features that suppose appear in iOS 4.3.3 but not in my Iphone, such as:
1. MMS Setting in General-Network
2. Call forwarding cannot be setup....keep on turn off by itself even thought have enter the alternate telephone number
Anyone could answer and help me?

1st, thank you for your reply.
I have check the setting under the Message menu, and it was set as "ON", but I still can not locate the place for me to enter my carrier setting for the MMS. This MMS Setting are supposingly seated in the "Network" menu.

Where is in OS X Lion the option to turn on or off the Magic Mouse scroll.

I have not found anymore on OS X Lion the option to turn on or off the vertical scroll of Magic Mouse. The problem is That I use Corel Draw with Parallels, and Corel Draw does not work with the scroll on, he gets mad. I always turn off the scroll option of Magic Mouse in OS X Leopaed before entering Windows XP. Now I had to put a conventional mouse and stop using the Magic Mouse because I dont find this option in the settings of the mouse preferences.
Anyone know how to solve this problem?
Many Thanks
Marcelo Silveira

1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Restart device

I am getting following error! XML Parsing Error: undefined entity Location: chrome://weave/content/options.xul Line Number 6, Column 3: setting id="weave-account" type="string" title="&account.label;" / --^

I am getting followong error
XML Parsing Error: undefined entity
Location: chrome://weave/content/options.xul
Line Number 6, Column 3: <setting id="weave-account" type="string" title="&account.label;" />
--^

I had this problem - it appeared to be due to having Firefox 4 with the Firefox Sync installed as an add-on. Firefox 4 has sync included so there is no need to have it as an add-on. I went to the add-on manager and removed Firefox Sync and now appears to be working correctly.

I turned auto login off and set a password. It does not work. I tried using the install disc and C key a few times but no success. Now the install disc does not even activate with the C key. Help

I turned ato login off. Set a password. On login it failed. Perhaps I misstyped when setting up. I used the instaldisc to reset the password but after a few attempts It failed. Was it a mistake to select the hard drive after resetting the password. I would like to try the alternative but now the C-key does not even let the install disc open, it goes directly to the name and password screen. I need Help

Keunepete,
When I ordered my books for the ICND1 and ICND2, they came with a CD in the back pocket (sleeve) of the book. Along with the CD was a thick piece of paper that had the activation code on it. It was a white, square piece of paper with big black print on it. Did you buy your book used? Was the CD sealed in the back pocket?
-Zach

HT5498 Is this information still valid after one and a half years? Are the lightning-to-HDMI or lightning-to-VGA cables the only available options to send video to a TV set?

There is a relative using an iPhone 5s and is interested in streaming video from her iPhone to an old TV set; unfortunately the TV set does not have either HDMI or VGA connectors; therefore we figured out getting a "lightning-to-30 Pin adapter", plug it to the iPhone 5s and use an old "Composite AV Cable" to do the trick. However, I found this post informing video streaming is not possible through the "lightning-to-30 Pin adapter", but -considering its post date- I would like to know if that info is still valid or if something has changed since then. Obviously changing the TV set is not an option, we have a limited "budget" to solve this.

Thanks for the feedback Rudegar. We're not planning using airplay mirroring using AppleTV, but directly as it used to work with old iPhone 4S. Just attaching the composite video cable (30pin-to-Composite) to the iPhone 4 worked on almost any TV set equipped with composite jacks. Maybe I have to rewrite the question to "...available wired options to send video to a TV set?"

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben [email protected]

Hello Trevor
Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
Ben

In Elements 13, how do I turn off default setting that sends my usage info to Adobe?

In Elements 13, how do I turn off default setting that sends my usage info to Adobe?
Vendors of proprietary software want to track everything you do. Adobe says that it is possible to turn off sending info to them, but doesn't include any info on how to do it.

Go to the main page of adobe.com and sign in if you aren't already signed in, then click Manage Account>Sign In again>Security & Privacy>Desktop App Usage Information.

MS SSIS command line call "Argument for option 'set' is not valid"

Hi all,
I'm tring to execute a SSIS package from command line. Here's the code:
dtexec.exe /file "E:\TestIS\IntegrationServicesProject1\IntegrationServicesProject1\Package.dtsx" /set \Package.Variables[User::Name].Properties[Value];20150314
and it return a error saying "Argument for option 'set' is not valid". I've configure the package and generated a XML file. And do exactly as the official doc says. However, this line of code just doesn't work. If I delete the set option
and run the package alone, it can be ran. So anyone can help me out? Thank you in advance.

Hi NoahdeArk,
In SQL Server Integration Services, string literals must be enclosed in quotation marks. The expression language provides a set of escape sequences for commonly escaped characters such as nonprinting characters and quotation marks. A string literal consists
of zero or more characters surrounded by quotation marks. If a string contains quotation marks, these must be escaped in order for the expression to parse. For more details, please see:
https://msdn.microsoft.com/en-us/library/ms141001.aspx
So to troubleshoot this issue, please refer to the following command:
dtexec.exe /file "E:\TestIS\IntegrationServicesProject1\IntegrationServicesProject1\Package.dtsx" /set \Package.Variables[User::Name].Properties[Value]; \"20150314\"
Or
dtexec.exe /file "E:\TestIS\IntegrationServicesProject1\IntegrationServicesProject1\Package.dtsx" /set \Package.Variables[User::Name].Properties[Value]; \""20150314"\"
The following similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/af4f62e1-b600-49d7-98c2-4a35c9fef404/escape-character-for-set-option-of-dtexec
http://stackoverflow.com/questions/9612471/dtexec-error-setting-multiple-variables
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Option of turing on or off mms setting is not coming in my iphone 5s

Similar Messages

Maybe you are looking for