Option+Return does not work in applescript studio

Fresh install of osx 10.4.6 Tiger, newest release of xcode.
I start an applescript studio application project, when editing in Xcode Option+Return does not insert the continue line character.
I can open the same .applescript in the Applescript Editor and Option+Return does work.
Also, Option+Return works in my desktop installation of Xcode. No idea what's different here or how to fix it, but it's really messing with my work flow.

Moved to .NET SDK forum.
Search here, lots of post on IIS and setting Printer Access Permissions for your application.
Also search MSDN on what is required to for IIS to access local Printers.
Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
Don

Similar Messages

In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

When I restart, previous tabs & websites open. I have selected open in new page in options this does not work

When I start my computer and open Firefox, all the tabs from the previous session open. For now, I have to return each session to my home page (Google) prior to closing to prevent this from occuring. I have selected "When Firefox starts show my home page" this does not work. I have de selected and then reselected this option numerous times and it has now become a very big annoyance. I am about to uninstall Mozilla if this cant be rectified.
Regards Tony

Please try to troubleshoot preferences that do not save. [[How to fix preferences that won't save]]

Shockwave option "swContextMenu" does not work

The option to hide the contextual menu does not work (context
menu appears when you right click on the movie).
<param name="swRemote" value="swContextMenu='false'">
We have some multiplayer online games, and the context menu
pauses (absolutlely blocks) the game in Internet Explorer 6 & 7
(WTH!)
Any idea?
More
info about the parameter

I have found the solution! If you have a sw* parameter too long (really too long), the right-click context menu always work, despite the swContextMenu parameter... :-)

After installing or upgrading to Firefox 31, starting Firefox does not show homepage, customize shows a blank page and the option button does not work

I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
Any help would be appreciated. Thank you.

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

Option + Reboot does not work.

Macbook Pro 2010 15" 2.66GHz Intel Core i7
So this is my miserable situation:
Last night I dropped my Mac on right bottom corner (unfortunately where hard-drive is located).
After this the device makes a jerking/clicking sound from right bottom corner which is most definately the hard-drive. I was able to use the device for a minute and then it froze. After a hard-reset the device got stuck on the apple logo while the wheel was spinning, waiting for a while, I got no response so I did another hard-reset and since then the only thing I was able to see was the grey screen with no logo.
I am aware that I need to replace the HDD but I have critical information to be backed up. So I discussed the issue with a friend of mine who is an expert in these situations and he told me to try to repair the drive with Disk Utility and if it did not work I have to boot into DiskWarrior 4.4.
About an hour after the incident I tried these:
Holding Option after chime allowed me to enter Recovery Mode. I tried this 4 times and these are the results I got:
First Time: The recovery screen showed "Macintosh HD" and "Recovery HD" with the chance to choose a network to connect to. Mistakenly I hard-reseted again since I did not know how to proceed.
Second Time: This time the only option on recovery screen was "Internet Recovery" and apparently the device did not recognize my hard-drive anymore.
Third Time: I had the options to do an "Internet Recovery" or "EFFY or IFFY Something (I don't remember clearly)"
Forth Time: I tried Internet Recovery yet received a -2002F error.
Last Time: I tried Internet recovery, was able to access Disk Utility. Proceeded to do a "repair" and got "Invalid Node Structure" error. While the Disk Utility was attempting to rewrite B-tree the Macintosh HD drive disappeared from left side and everything froze. I attempted another hard-reset until now.
At the moment: I borrowed a copy of DiskWarrior from a friend mine. I attempted to hold C after chime, I got no result even though I waited for approximately ad hour. Then I tried to access it through Recovery Mode. So I held option for a lengthily time and no result! Force-ejected the disk. Tried to access Recovery Mode by itself again and after 10-12 attempts I cannot manage to access it from gray screen.
I know I have to hold the C or Option key after the chime. I know that I have to "hold" it. I know how to operate these. This is not my issue. It just doesn't work.
I would highly appreciate if an expert can guide me through this.

Hi j,
You can try FireWire Target Disk Mode http://docs.info.apple.com/article.html?artnum=58583
though I doubt it will work with a dead/near dead HD. Depending on what has been damaged, a professional data retrieval service may be able to salvage some data; look up data retrieval in yellow pages or online. When you talk to them, make sure you're sitting down as their service is extremely expensive. IIRC, some won't charge you unless they can actually retrieve data. IIRC.
As for the MBP itself, it sounds like you know what you're doing, and putting a new HD should tell you if it was just the HD problem, or if there is additional damage.
Good luck to you.

Published IOS app space bar and return does not work

Hi
We have developed an app for iPhone/iPad in XCode on a mac. When debugging on iPad from mac, we are able to enter any character in to a text box.
However, the app has been sent through Apple in to the iTunes store and when installing from there, entering in to a text box, the space bar, return key and other non A-Z 0-9 characters just do not work. The space bar does seem to make the auto correct suggestions change, but does not enter a space in to the text.
Why would this happen?
Any help would be hugely appreciated!

Contact facebook here. Sounds like its an app issue.
http://www.facebook.com/help/220217228006012/

Goods Return does not work in some instances

We are on SRM Server 550 SP4 ECS
There two Return codes which are giving error
Reason for Return - Goods not ordered
Error Msg: Reason for Mvmt 004 not supported (Check your entry)
Reason for Return - Goods Delivered Twice
Error Msg: Reason for Mvmt 005 not supported (Check your entry)
Two questions
1) Do we have to make any configuration changes in order this to work? The other reason codes work.
2) Is there any configuration table where we can add more reasons for return?
Thanks

Hi,
Here are all the config steps :
Text Types Menu Path : SPRO -> SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Text Types
Text Schema: Menu Path : SPRO -> SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Text Schema
Fixed Values: Menu Path : SPRO ->SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Fixed Values for Texts
Kind regards,
Yann

Shrink option in -toPostScript command line options still does not work

shrink and expand options in -toPostScript command line options do not work, it was posted that this issue was fixed in V 8.1.2, but apparently, it is still not working, when printing .out files, the body of the output is pushed to the left and up by about half an inch.
What was it that was supposed to be fixed? Can someone please assist?

Please forgive my ignorance, but it's called Adobe Reader 8.1.2. How do I tell that it's for Unix?
We are using Linux, and just to explain a little more like I should have in the first place, I'm trying to run reports from an Oracle environment which is saving the .out file on the Linux box, then this is sent to a Windows printer for printing...

Show View Options (DEFAULT) DOES NOT work

I'm pulling out my hair trying to get my Finder "show view options" to default. This worked fine in Leopard, but in Snow Leopard, the make "default" option doesn't seem to work. I'm using an erase and install version of Snow Leopard. I've used Cocktail and SWIPE to delete all DS_Store files and still it seems the default option won't work.
I can choose my settings, then make default. Some folders will accept it and others won't. I've searched the web and see others with the same problem. Is there an easy solution? Switching through folders only to have different finder views is really annoying.
Bryan

Thanks KT-- I finally got it. After using Cocktail, DS_Store Terminator, another app, and a terminal command, then finally a restart, all seems well. I finally have all of my finder windows to my default view.
I'll bet Cocktail and then a restart would have worked though, but I didn't restart until the last step.
Anyway, it's good now.
Bryan

Force quit command option esc does not work in snow leopard

When I try to use this command I am sent to front row. I can force quit throught the apple menu. This began when I upgraded to Snow Leopard.

This might clear up some wierd inputs:
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Shortcut for downloads window in Safari does not work

Hi everybody,
My shortcut for downloads window in Safari (command-option-L) does not work anymore, when i press that combination of buttons, iTunes appears in my screen.
Can i do something to bring back my shortcut?
Santiago

Ok...
Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Now launch Safari. Try the keyboard shortcut for the Downloads window. If it didn't help, just move that .plist file back to the Preferences folder.
Also, go to your Safari menu bar click Safari/Reset Safari. Select the top 7 buttons, click Reset. Restart your Mac. That might help too.

I want to have all my tabs return after closing. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked, but it does not work. When I open FF again none of my formerly open Tabs show... FF v.4.

When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'

Some things to check:
#'''Browsing history must be saved'''
#*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
#*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
#'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
#*Using Clear Recent History
#**Firefox button: Firefox button > History >Clear Recent History
#**Menu Bar: Tools > Clear Recent History
#*When closing Firefox
#**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
#**Menu Bar: Tools > Options > Privacy (checked) > Settings
#**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
#'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
#*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
#'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore.

Format option does not work in reply mode re Bt Ya...

Hi There - I wonder if anyone has had this problem? When clicking on reply to a recipient's email I find that the format option does not work! (I use this to highlight my reply in a different text colour) It works fine when I compose a new email msg but not when using reply.
I am finding this switch over to this 'new improved' Yahoo email a nightmare to be honest. I would never have tried it out had I known I would not be able to switch back.
Why didn't I heed that age old saying 'why fix it if it ain't broke'
I would appreciate any help.
Many Thanks
Heddybell

Hi Stephanie
Thanks for replying to me.
No - none of those. Formatting just does not work! It was as if I had not tried to format - it just did NOTHING.
However, by some miracle (and believe me it was) I have been able to return to my old BT Yahoo Classic and the problem is no more!
Wow! That 'All-new Bt Yahoo Mail' leaves a lot to be desired! Thank goodness I got out of it even there was no 'Switch Back' available. Like I said "It was a miracle'!!!!!
Thanks again
Heddybell

How can i make a soft return with pages shift enter does not work!

how can i make a soft return with pages shift plus enter does not work!!

On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

Option+Return does not work in applescript studio

Similar Messages

Maybe you are looking for