Option "Show in Legend" in Series customizing

Hello all,
we create charts with various lines, but want to exclude some of them in the legend.
In WAD 3.X there was an item in Chart editor / Series customizing: "Show in Legend" with values "automatic"/"always"/"never"
I can't find this option in WAD 7.0 (patchlevel 13)
Any Ideas?
DG

Hi DG.
If you go to the chart editor and step 4 don't you see the properties for legend?
It might be because of a difference in the front end versions of your SAP GUI/BI.
Hope it helps.
BR
Stefan

Similar Messages

Terms of payment made optional in account group configuration of customer

Hi Experts,
I have made terms of payment optional in account group configuration of customer master for one time customer but it is showing me mandatory when I am creating or changing customer.
Is any body has any idea why this is happening?
Thanks
Krushnakumar Rathi

Hi
Select the Relevant account group
Double Click on the Company Code data under Field status you will get another screen
In that Screen Double click on the Payment Transactions under selection group and check the field "terms of payment" is Required entry or optional entry , mention Optional Entry
Same as Double Click on the Sales data under Field status you will get another screen
In that Screen Double click on the Billing under selection group and check the field "terms of payment" is Required entry or optional entry , mention Optional Entry
Regards,
Prasanna

Problems On Show Chart Legend in Crystal Report Java Viewer

Hi all,
We found the problem on show chart legend values of each column, i have already set the "Tool tip text " option by formart chart, but the ouput on java viewer on can show first column data. seem Java view not support for display Tool Tip by chart columns ?
Thanks
Andrew

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

How to show only legend in graph?

Is there any way to show only legend in graph? I tried to look in XML of request but I didn't find anything. Please help. :)

Just add a custom graph with
     <Graph Name='graph' Top='0' Left='0' Visible='False' Evaluation='Yes' Type='Bar' SubType='Basic'>
          <ValueScale Position='Left' MinorFont='Size:10;'/>
          <CategoryScale MinorFont='Size:10;'/>
          <Legend Name='legend_graph' Top='0' Left='0' Width='300' Height='100' Anchor='BottomRight' ZIndex='1'>
               <Properties AutoSizeMarkers='False' BorderType='Medium' BorderColor='#e5e5e5' UseTransparentFill='False' FillColor='#b999b9' GrowVerticalMaxHeight='64' MinimumFontSize='0' Font='Style:Italic; Color:#4c4c4c;'/>
          </Legend>
     </Graph>see also:
http://obiee101.blogspot.com/2008/08/obiee-date-time-scatter-graph.html
regards
John
http://obiee101.blogspot.com

Incoming Excise document automaticaly show the base document Series ans Do

Dear All,
One of my customer have two branches and for that they created them as two separate warehouses. And both branches are excisable unit. So when they are transferring inventory from one branch to other which are excisable so they have to raise Excise invoice based on Inventory Transfer.
They require in an incoming Excise document automatically show the base document Series and Docnumber in a "Excise Ref No." field .
pl provide me FMS query .
regards
Rakesh

Bom dia Marc de Ruijter,
Não dá para ler sua thread, mas imagino que seu validador esteja desligado.
No GRC vá em SPRO --> SAP GRC Nota Fiscal Electronica --> Configure System Response for Each Tax Number (CNPJ)
Para ligar/desligar o Validador basta clicar no check box na coluna Validation.
Observação: Para correto funcionamento do GRC deve-se sempre utilizar o validador ligado.
Após isto refaça seu teste, é provável que você receba um erro de validação para a NF-e. Veja em GRC Web monitor -> NFe Detailed View -> Validation History.
Atenciosamente,
Fernando Da Ró

Image contains camera White Balance setting; LR 5.5 only shows "As Shot", "Auto", and "Custom"

I have a new, Panasonic DMC-GX7. I shot a bunch of photos as JPGs. When viewing their Exif data using Exiftool, I can clearly see the camera's White Balance setting, as well as the Color Temp Kelvin, WB Red Level, WB Green Level, and WB Blue Level. However, Lightroom 5.5 only shows "As Shot", "Auto", and "Custom" when I click White Balance under Quick Develop on the Library tab or WB under Basic on the Develop tab. Exiftool shows the Exif Version as 0230 and the Panasonic Exif Version as 0405. Is LR looking for the white balance information in some other field? Do I need to configure it somehow for my camera? I am new to LR (but not to image processing), so could use some help figuring this out.

The whole question is not so simple as converting to DNG. Yes DNG is openly documented, yes the file can be read, but that does not mean it can be correctly interpreted by other software in the future and the best you can then do is starting the PP of your images from scratch. Imagine a DNG with LR adjustments that in some years you open the file in another software, possibly non-Adobe. Even if the file can be read it will not look the same, as the Adobe specific developing instructions could not be strictly followed. Even if all software manufactures agreed on a common set of adjustments, let's say everybody had a Highlights slider and a Clarity slider and so on, which is unlikely, the results would still be different as the underlying algorithms would be different.
Disclaimer: I only shoot raw and firmly believe it is the best option, but one must be conscious it has some shortcomings related to the future of our images.

Onlive TV listing does not show HD listing for series when I try to create a recording

It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
Here is what I am doing:
I go to this link https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
Then to ...........DVR Manger
select ...........Record A Show
I type search e.g. Nathan for You
I click on ........Search
and I select ......Click here to Show Details
Then I get to chose from 2 (the same) SD channels.
Nathan for You
190 Comedy Central
Tue, Jul 29 10:30 PM
Record Show Record Series
Nathan for You
190 Comedy Central
Tue, Aug 05 10:30 PM
Record Show Record Series
But there is the same on channel 690 HD!
This happens not only to this particular channel!
I remember it used to show also the HD channels.
The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
correct choices for both SD & HD.
Can this be fixed?
Thanks!

On the right click on HD under video quality to filter it.

IPhone 5S lost voicemail and when I tap vm icon the phone diales voicemail and gets busy signal. No other options show.

iPhone 5S lost voice mail and when I tap vm icon the phone dials voice mail and gets busy signal. No other options show.
started yesterday. No voice mail at all. When I tap the voice mail icon the phone immediately dials some number and that number rings busy. I can't select anything else. Using Virgin mobile/ I am stumped.
I have already tried a soft boot... power and home button....
Help!

Other than changing the SIM card, you don't mention any troubleshooting you did with your phone.
If you haven't already, try the following steps as needed:
Settings > General > Reset > Reset Network Setting.
Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
Restore phone in iTunes using a backup
Restore in iTunes as a new iPhone
IF the last step doesn't fix it, there is a hardware problem and you should make an appt. with an Apple Store Genius Bar. The fact that you haven't dropped the phone by no means rules out hardware issues.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
the TV: LG Smart tv

The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
The times when the query is sent are:
• at Startup
• at wake from sleep
• when the Mac-end of the cable is inserted
• when using the Option ( Detect Displays ) button in displays preferences

Help me in 'AR Details ' report shows total open invoices by customer

hi friends,
please help me in 'AR Details ' report shows total open invoices by customer and PO number over selected time range.
any thing related to open invoices please send me as early as possible.
Thanks,
Regards,
Yogesh

Hi,
Find the T.code VF05. You will get the list of open billing docs. Its SIS report. Please find whether the SIS is active or not in your system
Regards,

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

Why do certain media options show on PCs for the ImagePROGRAF 8300s, but not on our MACs?

Our shop had recently acquired a new imagePROGRAF 8300s large format printer. We've had a pretty good exprience using it, but realize a few things.
1. When installing the discs provided to us, by Canon, we noticed that when printing to "Scrim Vinyl Banner" material or "Gloss Photographic Paper 190 gsm" there is no option to choose these types of media on our MACs, having used the same discs for our PCs, but these media options show on PCs.
2. When checking for color profiles, there doesn't seem to be a color profile for scrim vinyl banner material on neither PC or MAC, even though it is offered as a media type.
I feel like I've installed almost everything I knew possible through the Canon support downloads. Not sure what else to do. Any recommendations?

Our shop had recently acquired a new imagePROGRAF 8300s large format printer. We've had a pretty good exprience using it, but realize a few things.
1. When installing the discs provided to us, by Canon, we noticed that when printing to "Scrim Vinyl Banner" material or "Gloss Photographic Paper 190 gsm" there is no option to choose these types of media on our MACs, having used the same discs for our PCs, but these media options show on PCs.
2. When checking for color profiles, there doesn't seem to be a color profile for scrim vinyl banner material on neither PC or MAC, even though it is offered as a media type.
I feel like I've installed almost everything I knew possible through the Canon support downloads. Not sure what else to do. Any recommendations?

Can we set the Option "Show add-in user interface errors" with VBA?

Does anyone know if the advanced Option "Show add-in user interface errors" can be set with VBA in Project Pro 2013?
\Spiro Theopoulos, Montreal, QC (Canada)

Spiro,
Sorry but as far as I know that option is not available through VBA.
John

In the first itunes i had the option show dubbel parts but whit the newer one i cant find that option annymore, where is it?

in the first itunes i had the option show dubbel parts but whit the newer one i cant find that option annymore, where is it?

palkia wrote:
in last 4 days, i been using the new ip4 to take important photos and creating new contact.my new ip4 never snyc to itunes
There's your problem right there... ^
Whatever you did prior to plugging it in and answering yes to start the restore is gone forever.

Option Show Source/Target Name "on" in the logic model

In the data modeler 2.0.0 was the option Show Source/Target Name “on”. Where do I find it in data modeler 3.0.0 ?

Hi,
Right click on Logical diagram and from context menu select Show->Labels
Regards,
Ivan Zahariev

Option "Show in Legend" in Series customizing

Similar Messages

Maybe you are looking for