Option to adjust printing to light or dark

USB connection. Even with a new cartridge it prints too light in many cases. Printing a text file is okay but for a fairly dark .jpg file or .pdf file it prints much too light. I can not find any adjustment to make the printing darker or lighter. On the machine there is a control for copying to be darker or lighter but the printer properties/driver does not seem to have any control for lighter or darker printing.

And whether that works (Photoshop > Preferences > Performance > GPU Settings) depends on your graphic display card (and its driver).
http://kb2.adobe.com/cps/831/cpsid_83117.html

Similar Messages

My Canon PIXMA MG2120 prints TOO LIGHTLY. How adjust to print DARKER?

My Canon PIXMA MG2120 prints TOO LIGHTLY. How adjust to print DARKER?

That's not really the answer.
The problem is that it will print at the correct saturation/quality only when borderless printing is not used. I purchased this item because I wanted to be able to print full color borderless prints on a full 8.5x11 sheet of paper. I don't want to have to buy special glossy photo paper just to print borderless. Is this the truth of the matter? You cannot print borderless prints on plain paper without sacrificing significant quality? Does it always assume when you set it to borderless, whether youre in the standard print menu or the photo print menu, that you're printing a photo and it will then default to printing lightly? This is outrageous. They should say something about this in the manual.

Hp laserjet 1320 prints to light with a new 49 x cartridge. old cartridge prints fine and dark.

I bought a brand new 49x cartridge and it prints to light. I put my old cartridge and it prints dark.
Any hint on what the problem could be?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

How do I print a pdf file that is printing too light to read??

I have a pdf that I must print to buy a home. It will not print as is. I shot screen shots, brought them into Photoshop, made them jpgs and adjusted the gamma to make them very black and white.
It helped but the pages cannot be read. There is plenty of ink in the printer.
I need to send this paperwork tomorrow with a check...
WHAT TO DO?

I have this problem as well, prints come too light out of my Brother5370DW and consulted several channels on internet. Printing from pc was never a problem, only from mac: jpgs, tifs, txt, from Preview, Safari, Firefox, Photoshop, Acrobat etc whenever the document it was not full b/w. Especially screenshots from Google maps were just illegible. I just tried to print a pdf with dark grey text, very light as well. Then it ocurred to me to change the color matching profile in the printer's dialogue window: instead of automatic (which is Adobe RGB (1998) by default, I choose Black & White, and finally it prints fine: black what is supposed to be black, idem for dark greys, light greys.

Printing Too Light

I have been creating Pdf files from both AutoCAD and Microstation. The files look perfect on the screen but when I print them to our plotter Xerox Wide Format Print System 8825 the image prints too light. Files consist of black and grey scaled objects. Is there any way to print 'wysiwyg' from adobe
So far the only way to imporove the prinitng has been to use the print as image option. But this decreases the quality.
Thank you
John

The troubleshooting steps in the document here may help resolve black printing faintly on your Officejet 4630 printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't adjust print size when printing from the internet on HP F4440 printer.

When printing articles from the Internet the print is too small and I cannot adjust the size. How do I work around this?? I don't want to have to Cut & Paste to Word all the time.
I have already loaded updated Drivers - No Help..
I thought there was an option to adjust the size of the print prior to the document being printed, but I can't access that function now???

Hi,
Which brower are uou using, they have vary similaar way. The following steps are for Firefox
(a) Click Print,
(b) At the top of preview screen you can see "Scale" options
(c) Increase size (in %)
(d) Now print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp color laserjet cp4020 series black printing too light

Our company bought an HP Color LaserJet CP4025 about 2 months ago. It printed perfectly through our first deadline, but when we changed the black toner cartridge, it now prints somewhat brown or gray and the colors aren't quite as bright. What can we do to fix this?

So the other colors are printing darker / or look normal? If Only the Black is faded even on the config page relative to the other colors present, or in other documents?
Do you have another cartridge to test out if this is a cartridge issue?
In the Service manual it indicate the if print is light or faded in a particular color there may be a poor primary transfer bias contacts on the ITB unit and product, or porro primary charging bias contacts with the print cartridge and product, or poor developing bias contacts with the print cartridge and product
Solution: Clean the contacts of the color that produces the light print. If the problem remains after cleaning check the contacts for damage. Replace any deformed or damaged parts.
http://www.scribd.com/doc/77359204/CP4020-CP4520-Service-Manual#outer_page_60
I work for HP

N97 recording video goes light and dark

Has anybody else noticed that when recording video it seems to go light and dark as if it cant decide what contrast to record in, it isnt a major issue but just wondered if anybody else had the same problem?

Hi
I have found the solution..
Insert supported microsd card into card slot and set this memory card for camera.
I mean after card installation go to camera options and change the setting for memory in use to memory card.
it's tested and working fine
Enjoy

HT1320 Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Why is my iPod Touch 4G screen flickering light and dark?

my iPod Touch 4G screen flickering light and dark all the time?!?! I also have this problem where at the VERY bottom of the screen, Theres this white bar that keeps flickering on and off!! PLEASE HELP ASAP!!!

The screens are practically the same.
Did you purchase your iPod Touch second hand or direclty from the Apple Store? I would recommend that you go back to the Apple Store and show them both devices in action so that they can advise you closely.

HT4356 How do I AirPrint in black and white from my iPad so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white.

How do I AirPrint in black and white from my iPad2 wifi/3G so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white. I have an Epson Workforce 845 printer.

There is no option to force black and white ouput.
You can request the feature here:
http://www.apple.com/feedback/ipad.html

Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported.

I downloaded Indesign CS3 trial and liked everything about it until I attempted to print to postscript and got that message. Nothing I have tried has helped. I have seen in various forums that others are having the same problem, but haven't found any solution offered. I am running Tiger 10.4.10 on a new Intel Imac with 3G ram. This is a procedure I use very often in my workflow, and have never had this problem with CS2 on my PC or other Macs. Is there a solution? I downloaded the .1 update and installed that and it didn't change anything.

PLEASE SOMEONE HELP ME.
Its the first time Im using print booklet option to save my file. I have the same problem when trying to save as pdf and get the
"The Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported."
I'm trying to save a .pdf of a booklet of a facing pages document of A4 size each facing page for a whole size A3, then hope to let the pages be correctly arranged by inDesing, then print and staple.
Meaning pages will be like this - Page #60 left side [of the A3] - page #1 right side [of the A3] , page # 2 right side[of the A3] - page #59 left side[of the A3] etc...
I CANT DO IT. I tried to follow Melvin Thompson , but when I choose save .ps and open it in preview all I see is independent a4 pages and just the left ones , .. How can I save my file as .pdf ready to be printed in a3 ?
I really appreciate any help.

The Save as PDF option in the Printer dialog is not supported.

My client is asking me to save a separations PDF file. But whenever I save it to PDF, a this message pops out: The Save as PDF option in the Printer dialog is not supported. I'm using InDesign cs5 and Adobe PDF 9.0. I'm on Mac OS X 10.6.6.

What it says is correct, have a look at this post here.

CS5 prints too light using new Mac, perfect from older Mac?

Images edited w. Photoshop CS5 (v. 12.03) on a Mac running OS 10.6.8 print perfectly on my Epson Stylus Pro 3880. But the same files printed from a newer Mac running OS 10.7.4 and Photoshop CS5 (v12.1) print too light. Exact same printer settings in PS being used, same printer driver version (reinstalled to make sure not a bad driver), using the same .icc paper profile (also reinstalled), and using same batch of paper printed at same time.
Where do I start in determining the problem? Epson confirms driver is compatible. Everything else on the new system with PS works great. Gallery show in three weeks, must figure this out quick. Thanks.

Ps update is 12.0.4 and 12.1, but you are probably missing something, by posting screenshots someone may be able to spot the problem
are you sure which one is actually wrong
do they display identical in both OSes
are both versions of Ps using the same embedded profile, did you confirm that

Option to adjust printing to light or dark

Similar Messages

Maybe you are looking for