Option to convert Planned orders to Process order C

Kindly suggest, which is the best option to convert Planned order to Process order C from below mentioned options
1) Convert Planned orders to Process order C & send it to R/3. or
2) Send Planned orders to R/3 & convert it into Process order C in R/3
Regards,
Chetan

Depends on the process and how stable your planning is. If there is a lot more decisions to be made in the R3 side you let the planned orders be converted in R3 else
you normally would use the conversion indicator and send the planned order to R3 and it gets converted to Process Order there

Similar Messages

  • Error when convert planned order to process order

    when using tcode COR7, unable to convert planned order (make to stock) to process order.
    error message: No default value is maintained for operation generation for order type ZI03
    note: order type is customised.
    please assist where to check or maintain the default value..TQVM

    Dear ,
    Create default operation for the process order type and plant combination in OPJG and then check for converting the planned
    order to process order.
    If you want the system to automatically pick the master recipe,then make the necessary settings and selection ID for the process
    order type and plant combination in COR4.
    Check and revert
    Regards
    S Mangalraj
    Edited by: Mangalraj.S on Sep 24, 2010 1:51 PM

  • Purchase order vs planned order vs process order vs production order

    Hi,
    Kinldy explain difference between the  Purchase order,  planned order,  process order and production order?
    Thanks & Regards
    Ravi kumar

    Hi Ravi,
    In simple terms:
    planned order - A procurement proposal generated by the system to meet a need, this can then be converted to a production / process order (for internal procurement) or into a purchase reqn & in-turn to Purchase order (for external procurement)
    Purchase order - A firmed procurement proposal which is sent to your vendor (external procurement) to supply the items as per your order
    process order - A firmed procurment proposal which is used for in-house procurement, this is used in process industries eg: chemicals, oil & gas etc 
    production order - A firmed procurment proposal which is used for in-house procurement, this is used in discrete production industries
    Based on the above am quite sure you should be able to figure out the differenced. If any doubts revert.
    Regards,
    Vivek

  • Get the supply source of planned order and process order.

    Hi experts,
    I would like to display production version (supply source) on prduct view.
    But, I don't know that how to get supply source of planned order and process order.
    APO  table is complax.
    Do you know that?
    Regards,
    Satoru

    Hello Tushar,
    Are components also plan in APO with MRP type X0?
    Does PDS or PPM contain all the components?
    Verify if the component is maintained properly in the PDS.
    Check whether there is an active integration model for the components, also execute the RAPOKZFX report for all the materials in question.
    When you convert the PPDS order to process order then conversion happens in ECC/R/3 system. This is the place BOM has to be reexploded in ECC. Please check if you have any enhancement which restrict BOM explosion. 
    Also check OSS note 1576703 suggested by an expert Caetano.
    Best Regards,
    R.Brahmankar

  • Converison of planned order to process order in background

    Hi ,
    Can we do conversion of planned order to process order in background.
    I know for production order conversion  Program PPBICO40 will do the needful. Can we have anything like that for process order also?
    Thanks in advance

    Hi,
    PPBICOR8 is the program.
    Hope it answers your query.
    Regards,
    Vivek

  • Stop new planned order when process order GR qty less then sales order qty

    Hi All,
    How should SAP be configured so that when a process order is GRu2019ed, the sales order requirement is fulfilled regardless of the quantity difference between the sales order and process order?
    The system behavior we are currently experiencing is MRP will generate another planned order for the fixed lot size if the GRu2019ed quantity is less than the sales order quantity.
    Additional background information:
                    Make to order scenario
                    Process industries
                    Batch control
                    Warehouse management
                    Fixed lot size
    Any comments or suggestion are welcome.
    Thanks.

    Brahmaji,
    Thanks for the reply.
    I agree that changing from FX to EX will produce a planned order for the quantity difference (SO qty less the GR qty).  So this would be an improvement to our present situation, but not quite what we are looking for.
    The system behavior we want is MRP to ignore the requirement for the difference, in other words, when the GR is done for the entire batch quantity, we won't be producing any addition product.  The sales order would be considered complete.

  • Function Module to fetch Customer Number from Sales Order or Process Order

    Hi Gurus,
    I am looking for a Function module which gives me customer number from Sales order or Process order.
    Please let me know of any FM's available.
    Regards,
    Madan

    Hi,
    Thanks for your response.
    I am actually looking for function modules which take "Sales Order" or "Process Order" as input (import parameter) and return Customer Number as output (export parameter).
    Please suggest some function modules you know any.
    Many Thanks,
    Madan

  • Can we delete production order or Process Order

    1.Can we delete production order or Process Order
    2. Significance of TECO
    3. How we can do Goods Reciept apart from production scheduling profile

    Dear,
    Delete production order check this link,
    http://www.sap-img.com/production/how-to-delete-old-production-orders.htm
    Go to CO02- Change production orderin menu choose-Functions--Restrict Processing-Technically Complete
    Teco will close the Production order from Logistic point of view , reservation get deleted, capacity requirement also get deleted.
    Auto GR can possible through control key with mark as auto GR in work center.
    Regards,
    R.Brahmankar

  • Convertion of Planned Order to Process Order

    Hi Gurus,
    While I am converting planned order > process order thru BDC ( SAP Std T-code = COR7)  , while saving the process order , following error is coming " No Status Object is available for ORD % 000001 "
    What could be the reason?
    How to overcome this error message.
    Srini

    Srini,
    Can you please confirm, whether you are getting the same error message when you are performing manually without BDC program?
    Also please mentiont the message number you are getting, there are several OSS notes available for this Issue.
    Regards,
    Prasobh

  • Planned order to Process order

    Dear Guru's,
    While Planned order we are converting into Process order and if any RM is missing no warninig message appear.
    What is missing in this.
    regards,
    Vijay Pabale

    Dear,
    No warning message appears because you need to set in your OPJK under material tab weather you want check or not.
    And under release material you need to decide:
    1     User decides on release if parts are missing
    2     Release permitted despite missing parts
    3     No release if parts are missing: It will stop you from release.
    Regards,
    Alok Tiwari

  • Conversion of planned order into process order not respecting F-S

    Hi Experts,
    I am working in Upgrade project from 4.6c to ECC 6 .
    I have an isuue in PPPI
    I have a process order which has to be converted to process order .
    This operation should take place by phase 210 first then phase 300 .
    But in our case the Phase 300 is starting first .
    please suggest me where to find the trouble.
    Thanks in advance

    Hello,
    I am afraid that when I enter procurement type=X & special procurement=30 in material master data, planned orders created by MRP have then a order type = NB (standard purchase order) and special produrement type = 3 (subcontracting).
    So this kind of planned orders can only be converted into purchase request and NOT into production order.
    It looks like it is not standard to do so in SAP and that I will have to manage subcontracting in prodution order; 1 routing for internal operation and 1 routing for subcontracting.
    Thanks
    Amaury

  • Conversion of planned order to process order

    Hi,
    I am having 3 valid production versions for the same lot size selections. I have created one planned order in that I maintained one production version. While converting into process order it is not picking up the production version what I mentioned in the planned order. If any body have an idea why it is so, please help me.
    Thanks & Regards
    Rao

    Hi,
    In transaction COR4(Order type dependent parameters), for the plant & the process order type check the production version selection setting, whether it is manual or automatic.
    Regards,
    Senthilkumar

  • Automatic mass conversion of SNP planned orders to Process orders

    Hello,
    we currently convert our process orders from APO by following steps:
    1. In RRP4 - select convert SNP orders.
    2. Click Save.
    3. Set conversion indicator.
    4. Click Save.
    This is a very tedious tasks and we would like to automate this.
    Reading previous posts - I know this can somehow be achieved in transaction RRP7. However, I haven't been able to convert SNP orders (steps 1. and 2.) in RRP7 yet. Does mass conversion only apply in setting the conversion indicator?
    Best Regards,
    Sam

    Hello,
    thanks for your reply.
    We are currently processing orders in RRP4. We would like to automate this process  as much as possible that is why we are considering RRP7. However, I haven't found a way to automatically convert SNP planned orders to PP orders in APO.
    Best Regards,
    Sam

  • Planned Orders and Process Orders Data Extractor

    Hi,
    I am working on extracting process order and Planned Orders data into BW. I could not find any standard DataSources available for my req, so I want to develop generic extractor. the main key figures are Actual Labor and Machine Hours, Target Labor and Machine hours.
    Could you please help me if there are any standard datasource available or ECC tables to pull the data or any standard function modules available?
    Thanks,
    Hanuma

    hi,
    hope the mfg datasources were useful.
    chk the LBWE -> application 4 -> chk the DS 2lis_04_P_arbpl,2LIS_04_Matnr etc...
    All R/3 Tables
    http://www.sap-img.com/sap-download/sap-tables.zip
    Generic Extraction
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    LO Extraction:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Ramesh

  • Spliting of planned order to process order

    Hai gurus,
    I have an issue:
    For example if i have requirement for 1000numbers of finished goods, and if I run MRP and create a planned order under
    PI scenario, But I want to create process order for the qty daily (For example 100 numbers), can I do this, and also this
    daily qty may vary based on the available resources,( some times it may be 100 or 110 or 120) for that day production.
    If that is the case can I create the process order daily based on the master planned order .
    waiting for the positive reply.
    with regards,
    sekar chand

    Dear,
    Through COR7 - Individual Conversion  or COR8 you can partial convert  your planned order to the process order as per your resource availability you can define the order quantity during conversion.
    Regards,
    R.Brahmankar

Maybe you are looking for