Option to disable MMSync installation

Does any sort of registry edit key allow a user to disable Nokia's check to see if MMSync is installed on a connected phone? I use my phone for Internet access and always browse using the file system. I've no need for a "synchronisation" app - I installed it once and it seemed to be intrusive.
This check causes an extra prompt that I have to answer on the phone and on PC suite which I'd like to avoid. I'd like Nokia to make this feature available, or perhaps it is already?
Message Edited by real on 23-Mar-2008 01:13 PM

This is a user forum. You are not talking to Apple. You should post your request to Apple here: http://www.apple.com/feedback/iphone.htm

Similar Messages

Question:-Is there any way to disable the installation location/folder of da Adobe AIR Application?

Is there any way to disable the installation location/folder of the Adobe AIR Application or can we skip that part automatically?

xmlns:mx="library://ns.adobe.com/flex/mx" is the spark mx address, which is completely different than the original 2006 mx library.
The thing is: I love AIR, hate spark, loved the 2006 pre-spark functionality. It is so much more convenient and user friendly. Given the choice between having the display seperate from the processing, or having it be convenient and easy to work with, I choose the later option.
For the most part it seems like the AIR api is like a layer on top of the spark - flex system.. I would like to be able to over lay the same AIR functionality on top of the the old system....
Possible or no?

How do you completely disable the installation and use of add-ons for firefox 4? Is there a config setting/file that can be changed to completely disable add-ons?

I want to completley disable the installation and/or use of add-ons in Firefox 4. I don't want anybody that logs onto either of my computers to be able to use add-ons and I can't find a way to disable it in the configuration files. I've found ways to lock down other options like updates etc. but I cannot find a way to completely disable add-ons.

See:
* http://kb.mozillazine.org/Locking_preferences
You can use a mozilla.cfg file to lock prefs or specify default values.<br />
You can place a file local-settings.js in the defaults\pref folder to specify using mozilla.cfg.
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
To prevent users from installing software use:
<pre><nowiki> //
lockPref("xpinstall.enabled" ,false);
</nowiki></pre>

How do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open

how do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open

Solution may be found if you search in the "More Like This" section over in the right column.

Apple, can we please get an option to disable coverflow?

I have been lurking on these forums for About a month now. Patiently, hoping for Apple to release an option to disable coverflow. I´ve been loyal. I´ve been patient, but still not software update to fix this horrid feature. So far, one of the biggest and most voiced complaints has been on this coverflow feature. People Want -- no, need -- the option to disable it. And that is my only problem with the device.
APPLE, please give us a software fix pronto. As a software developer, I do not understand why this would take so long to do. Can anybody from Apple, who reads this forum, confirm that a software fix will be coming? I know there has been mention of it, but I have seen nothing official from Apple.
If there isn´t a software fix to allow us to turn coverflow off, I plan on getting rid of this device for a Sansa Clip. I bought this device for working out and being on the go, I cannot workout and be on the go, and use this device effectively when I have to constantly take it out of my pocket to adjust the volume. And putting the hold switch on to make sure it does not go into coverflow mode is extremely annoying. I want to be able to adjust it while it is in my pocket. There have been multiple threads on this. Can we have a fix already? And if not, just tell us. I will gladly get another device and hawk this thing on Amazon or Ebay or just flat out return it.
If a fix is coming, somebody from Apple should indicate this, because for me, personally, I am tired of waiting for something that should have been implemented right out of the gates. I can understand if they missed it, but it should have been fixed quickly.
What´s more, coverflow ruins the battery life. Is this just some plot to get the batteries to drain quicker or what? I would bet that Apple´s top selling Ipod is, in fact, the nano, and to not fix this problem might get loyal people like me to thinking, well, ¨Hey, maybe they want people´s batteries to run out quicker so they will buy a new one quicker, no?¨ Perhaps a little too tin foilish on my part, but you have to wonder. To me, the lack of contact regarding it in these forums and the lack of fix has got me to thinking that, and has me seriously considering dropping Apple´s digital media player lineup. It is a simple software fix, is it not?
Honestly, I could understand if this fix was something more complicated, like implementing a codec that needed hardware decoding. I could understand if it would take longer. But what we are talking about here is something to turn the coverflow off. This shouldnt be too difficult. After all, the firmware for the new nano does, in fact, allow us to tirn off shake to shuffle. Why not coverflow?
And, if it is not, if this option cannot be implemented because of some wierd thing with the hardware -- please explain that to us, Apple. I could have easily bought a Zune, or something from Sansa to go workout, but I stuck with Apple because I am loyal and usually the products are good, but this is absurd.
So apple, will there fix a software fix coming shortly?
Or will it be several months down the line (in which case, I will get rid of it)
What is the holdup?
Can somebody from Apple please reply?
An ipod Nano owner. (but for how long?)

Dude, your annoying. I was answering a question, so it would say I have 0 unresolved questions. What if a google search pulled up my question, though not as popular as the original coverflow thread? I know Apple already fixed this issue, but I wanted to make my question answered. A) because it could be helpful, if google pulled up my specific thread and B) I was tired of having an unresolved question in my menu whenever I logged on.
Think about it before you post something idiotic and rude.
If you work for Apple, I am sure you could appreciate this, but probably not.

"Edit Report" option getting disabled on saving the report in BPC 10.0

I have created input schedules using "Edit Report" functionality in BPC 10.0 NW, added a few buttons and corresponding VB code and tested the input schedule by sending data and running data manager package. Everything is working fine. After that I saved the input schedule and closed the Excel. On reopening the excel Add-in and the input schdule, the "Edit report" option becomes disabled and refresh and other functionalities available for the report get disabled. I have faced this issue a couple of times. Has anybody else faced this issue? Can someone let me know the resolution to this problem?

Hi Shruti,
This is probably happening because the report/input schedules is not getting connected. Please check the connections once.
Also if you had named the report in "Edit Report" earlier, say for example "Sales Report", once the report is open you should be able to see this name on the EPM context pane, right side under Current Report: Connected to "Your Model" and below that in the drop down the default selection should be "Sales Report". This means that the report is connected and the Edit Report option is active.
Hope this helps.
Regards,
Bhairavi

Blackberry Desktop Software - Request Option to Disable Software from Loading During Start-Up

After Blackberry Desktop Software automatic updates. Software become part of Start-Up option or menu. I do not want Blackberry Desktop Software to automatically load during Start-Up. The Desktop Software does not have a user friendly option to disable the desktop software from loading during start-up. Am writing you to add this feature to your desktop software. I've just completed loading v5.0.1 and again I need to hunt and peck a way through windows to delete this software from loading during start-up. This software needs to have a user friendly option to disable the desktop software from loading during start-up. When I loaded v4.x.x when I bought my blackberry your set-up wizard had this disable option, but all your subsequent software upgrades change my windows start-up to load blackberry desktop manager software. Please add this feature to your software.

Hello and Welcome to the Forums!
In regards to your hope that RIM will see your message -- these forums are a user-to-user support channel, not a user-to-RIM conduit. As such, it is unlikely that they will see what you have written. However, if you have specific and constructive ideas for them, I have heard that they accept such via email to [email protected]
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SOAP Adapter option is disabled in adapter monitoring

Hi
I am trying a simple SOAP to FTP scenario. I have done all the steps in the repository as well as the directory and i have even activated it, but in adapter monitoring the SOAP adapter option is disabled.
Hope someone could help me out on this.
Thanks & Regards
Rahul

Hi Rahul,
We have also faced this type of problem. But at that time we were calling XI from a ASP.Net page.Just a few suggestions which you can try out :
1) Using XMLSPY and your wsdl file, try sending a SOAP request to the XI. If you got the response then there is no problem with your scenario.
2) If you didn't get the response or any erro comes then try recreating a new scenario nad repeat 1) (we have to do this after that only we got success )
3) Check your webdynpro code which call the XI server. Have a look at this weblog :
/people/sap.user72/blog/2005/09/15/connecting-to-xi-server-from-web-dynpro
Hope this will be helpful.
Regards
Suraj

FBV0 POST option is disabled for Vendor Invoice

Hi,
We have workflow intiated for Journals to post and not for customer or vendor invoice. But when i Park Vendor Invoice via FV60 and try to post it via FBV0, the POST option is disabled. No Problem with Authorizations. Please suggest a solution.

Hi Venkatesh,
Once you activate workflow for parked documents, You won't be having the option to post manually. It has to be released by authorised person. I think it can be resolved by avoiding workflow task to a particular transaction(FV60 or FV70). Please contact your workflow consultant for this.
Regards,
Prasad

Your does not appear to me the option of Upgrade existing installation

Your does not appear to me the option of Upgrade existing installation to a clustered installation
I am installing sap 4,7 ext: 110 in cluster formed with Windows 2003 enterprise and SQL enterprise 2000, the manual of sap says to me that it installs SQL of local way in the node a of cluster, later mind to install service pack 3 in the node a, later mind to install sap in the node a, after that requests to me that realise upgrade of SQL with the Upgrade option existing installation to a clustered installation but that option does not appear to me qualified

Here is a short (not necessarily complete) list of Cluster Option Requirements
- The SQL Server binaries are installed on a local non-
shared drive (Only Node A).
- The disc for the database files and the log file are
belongs to the SQL Server Cluster Group (MSSQL).
- On node B is no SQL Server with the same name (named
instance name or default instance name ) installed.
Check the registry on node B for the branches
HLM\SOFTWARE\Microsoft\Microsoft SQL Server
and
HLM\SOFTWARE\Microsoft\MSSQLServer
Deinstall the SQL Server on node B, if it exists and
delete the registry branches on node B, if they still
exists.
- The executing user for the setup has appropriate
rights on both nodes
(domain administrator).
- The SQL Server database files (master, msdb, etc.) are
on a shared disc.
- Node B is available via private and/or public net.
- The Cluster service is running on node A and on node B.
- You are using the right CD (not mat.number 51011908)
or have set the version by means of the .reg file
sqlverfix.reg (see node 377430).
- All needed discs (SQL DB, SQL Log, Quorum) are on
node A.
Please check all the requirements and run the cluster upgrade of SQL Server again.
Best regards
Clas

How Can I deactivate CS3 in a machine where the Deactivate menu option is disabled all of the time?

We have a CS3 license. We lost the cd with the serial number. We want to deactivate the software in an old machine where it was registered to install it in a new machine, but the Deactivate menu option is disabled all of the time. How can we deactivate the software?

Use Web chat. Link at the bottom of this page:
Adobe ID, sign in, and account help

Purchase Order segment field is enabled even though Split Purchase Order option is disabled

Hi,
In Purchase Order top right side, next to Document Number field, there is a Segment field. My understanding was that it comes only if Split Purchase Order setting is enabled in Per Document Settings.
But in my Per Document Settings for PO, the Split Purchase Order option is disabled; still it is showing the Segment field. How can I get rid of this?
Thanks.

HI Rajesh,
SAP B1 have common Split PO settings in Document settings.
If we enable Split PO option in Document settings, then in Logistics tab of Purchase order screen Split PO will be enabled for all purchase orders.
If we don't enable Split PO option in Document settings, still we have option to enable only for specific purchase orders before we adding the document.
If Split PO option is "unticked" in Purchase order> Logistics tab, then it wont allow multiple warehouse in single PO.
Thanks
Unnikrishnan

IOS6 update disabled the option to disable/enable location services

I have updated to iOS6 (from the earlier latest iOS5.x.). I now notice that the option to Disable / Enable Location Sevices (global / application specific) is now not possible post this update to iOS6.
Note, I have already tried the "Rest Network Settings" and "Reset Location & Privacy" neither of which seem to have helped, reboot the iPhone does not help either. please advise if you came across this issue.

Go to settings/general/restrictions then look at location services and make sure it is set to allow changes

Why pass code lock off option has disabled in IOS 7.0.4

After updating the ios 7.04 pass code lock off option has disabled,please help how to disable pass code lock off

screen shot of above issue

Why pass code lock option has disabled in iOS 7.0.4

Why pass code lock option has disabled in iOS 7.0.4

Hi there ssiva141,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W.

Option to disable MMSync installation

Similar Messages

Maybe you are looking for