Option to select between windows 10 and windows 7 no longer showing at boot

Hello all, I have windows 10 installed on the same drive as my windows 7 install. When I first set this up upon starting the PC I recieved the windows 10 boot manager GUI that asked me which one I wanted to boot to as well as a few other options. I have
made no changes but now when I restart it takes me directly into windows 10. How can I get this menu back as my wife still needs to be able to access the other OS.  Thanks in advance for the assistance.

This is resolved. Probably obvious for most but coming from windows 7 I didn't know. For anyone who finds this on a search if you will go to windows update and on the left select recovery, then under advanced setup click on restart now. When this menu
finally loads you will have the option to change this here. Somehow mine was set from a 30 second menu to 0. I didn't change it or if I did I don't remember it. Any, Cheers!

Similar Messages

  • If i have two option to select between XI or BW which one in better and why

    if i have two option to select between XI or BW which one in better and why
    both in terms of money and in terms of my career growth.......

    Sheetika,
    XI if you  are good in JAVA.The rest is same for both XI and BW.
    K.Kiran.

  • Itunes and wireless devices no longer show up in upper right corner of itunes window

    Help! My Internet service was interupted last week and when it returned my iTunes and wireless devices no longer show up in upper right corner of the iTunes window.  I finally figured out how to get both of my wireless devices to show up on the left hand column under devices, but nothing else shows up now in the upper right corner!  I cannot for the life of me figure this one out and the tech manual is not helping at all.  Help!

    If you have the left-hand sidebar showing then that is where the store and your devices will show can be selected - if you press option-command-S if you are using a Mac, control-S on a PC, then the sidebar should be hidden and the store and device should go back to the top right. Is that what you mean ?

  • How do I get my 8600 premium printer to auto select between tray 1 and tray 2?

    How do I get my 8600 premium printer to auto select between tray 1 and tray 2? Right now, i have to pull out tray 1 to get the printer to feed tray 2.

    Hi Retrotriker,
    Follow the steps below to properly configure your paper trays.
    1. Touch (right arrow), touch Setup, touch Preferences, and then select Default Tray
    2. Select Tray 2 as the Default tray
    3. Open Printers and Faxes
    4. Right click on printer, and then select Printer Properties
    5. Click on Device Settings tab
    6. On this screen set the media type you have assigned to each tray (Example: tray 1 - Envelopes & Tray 2 - Letter)
    7. Click Apply, and then Ok
    8. When you have an envelope you are printing it will pull from Tray 1
    9. When you have a letter you are printing it will pull from Tray 2
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune

    Mac OS X 10.7.5
    I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
    It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
    Here is the information from the Partition Inspector:
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640   1151635239  Mac OS X HFS+
    3     1151635456   1152904991  Mac OS X Boot
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1       409639  ee  EFI Protective
    2         409640   1151635239  af  Mac OS X HFS+
    3     1151635456   1152904991  ab  Mac OS X Boot
    MBR contents:
    Boot Code: Unknown, but bootable
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Mac OS X HFS+
    Listed in MBR as partition 2, type af  Mac OS X HFS+
    Partition at LBA 1151635456:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 3, type Mac OS X Boot
    Listed in MBR as partition 3, type ab  Mac OS X Boot

    Hi Eric,
    Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
    The following information is available:
    Mount Point: Not mounted
    Format: Windows NT File System (NTFS)
    Owners Enabled: -
    Number of Folders: -
    Capacity:  274.55 GB
    Available: -
    Used: -
    Number of Files: -
    What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
    Should I clone the hard drive in the target disk mode??
    I'm not the best at this stuff so any more advice would be greatly appreciated!
    Thanks!

  • Upgraded my Living Room Apple TV to 5.2 and now it no longer shows up on my iPads as an option

    Upgraded my Living Room Apple TV to 5.2 and now it no longer shows up on my iPads as an option to play back my iTunes rented movies. Any idea why or how to get it to reappear? I did not update my bedroom Apple TV and it still appears as an option. Many thanks in advance.

    Did you check to see if AirPlay was still eneabled on ATV after the update?  Was the iPad/iPhone updated to iOS 6.1?

  • HT6337 Allow handoff between this mac and your iCloud devices not showing up in general preferences

    Is anyone not seeing this?   the Allow handoff between this mac and your iCloud devices not showing up in general preferences
    Imac 2011 21" mid 2011

    nevermind, Just figured out that my iMac does not support it. Thanks Apple, once again coming up with stupid functionality that only works when you pay more money. 3yr old machine, I guess I need to send it to scrap heap.

  • Over heating on charge and it is no longer showing anything on the screen

    My iPhone 5 is over heating on charge and it is no longer showing anything on the screen. I was using it when the screen went white and it hasn't worked since. I have tried to both restart it and to restore it. as the screen doesn't not work it is hard to tell the condition of the phone. However it occasionally makes the lock noise when pushing the lock button and also occasionally vibrates when operating the side switch. I can not leave it plugged in on charge as it gets very hot and it is no longer recognised in iTunes unless i put it in recovery mode.
    Has anyone else has this problem or can recommend a solution. I bought it second hard a while ago so it is not under any warranty.
    Thank you

    Sounds like the battery has become unstable
    Take it to an Apple store Genius bar for evaluation Suggest you do not attempt to charge any more
    at worse Apple may offer an Out of Warranty exchange device identical to donor
    In UK  price over the counter is £209

  • I am aware that many people, like me, have lost the ability to mirror their iPad, iPhone or computer with Apple TV.  Has anyone yet found a solution?  One day it worked, the next day the option to switch between the device and Apple TV had disappeared.

    Has anyone managed to resolve the problems encountered with Apple TV and the loss of ability to mirror iphones, ipads or computers?  One day it was working perfectly, from all the above devices, the next the option to switch between playing on the device or mirroring to apple tv had disappeared.  I have tried all the obvious such as updating iTunes, turning all devices off and then back on, but nothing is working.  Help please!

    Welcome to the Apple Community.
    Your problem is most certainly network related, you might try restarting your devices including your router as a temporary solution, but in the long term would be better correcting the problems with your network.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Difficulty in selecting between HV segmentation and classical(LV) segmentat

    Hi All,
    I am in a dilema to select between the HV seg. or the old LV one. Can anyone tell me is it feasable to work on LV segmentation with 20million plus BPs.We need it only for BP segmentation.Will the performance be affected drastically if we use LV seg.I am just trying to understand the pros and cons of both the solutions(i.e, hv and lv seg). It would be great if someone can give me more clarity on this so that we can choos ethe right solution for our client.
    thanks!

    Hi,
    starting with CRM 7.0 EhP1 there will be one single UI for HV and LV. You decide via the usage which one is used. However, if you want to use HV segmentation, you must have a TREX server up and running, whereas LV runs without. I dont know exactly what you mean by "Is there any such capacity for LV seg to be used". HV segmentation will always be faster.
    Best Regards
    --klaus

  • Selecting between java.io and java.nio

    Hi,
    I'm a bit confused between java.io and java.nio. What sre the major differences between these two?
    In areas are these best applicable?

    The java.nio package improves on the basic Java I/O that was available prior to JDK 1.4.
    It is designed to interoperate more natively with the underlying file handles (sockets, open files etc) to achieve better performance.
    The improvements include true non-blocking I/O, better buffer management, character-set support, channels (similar to Occam's channels) and selectors, and some other ancillery stuff. Most of these classes are designed to be inherently threadsafe.
    There are some examples here:
    http://java.sun.com/j2se/1.4.2/docs/guide/nio/example/index.html
    However, if you are still a beginner with file or network I/O, its better if you start with the simple I/O first. You'll appreciate the NIO improvements better afterwards.

  • Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

    Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
    Some other potentially relevant information:
    1- The Boot Camp icon is no longer present in the Windows System Tray.
    2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
    3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
    4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
    I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
    Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

    Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
    Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
    Will keep you posted on any progress I make.
    Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

  • Optional applications selected via UDI interface and stand alone media

    I'm running SCCM 2012 sp1 with MDT integration.   I'm using a UDI from MDT to set some basic machine informatoin for imaging (select the OU in the domain, etc).  I also have some optional apps that a tech can select from the UDI to install during
    the TS. 
    All is working great with network based installations.  However, I have a need for some installations using stand alone media.  Is there a way to create stand alone media that will include those optional apps in the MDT UDI so that those apps can
    install during the TS?   I don't think there is, but there are more brilliant minds than mine out there so I thought I would ask.  Maybe there's a way to generate stand alone media via a PS script or something, and have it include the additional
    packages so they are on the media and can be called via the TS when it runs.
    Thanks!

    The root cause of this issue has nothing to do with UDI really, it is just the fact that installing applications using dynamic base variables is not supported in standalone media.  As you say everything has to be directly referenced by the task sequence
    for it to work.
    We had this same issue a couple of years ago in ConfigMgr 2007 and ended up building our own standalone media wizard using the SDK.  Sounds like a lot of work I know, but for us it was well worth it.  We have just migrated it to ConfigMgr
    2012 and updated it to support the app model.
    The reason it made sense for us to invest the time in it was because we are a fairly large enterprise (160,000 seats) with a single task sequence used worldwide.  The Windows 7 configuration requirements (not just in terms of app deployment) vary
    dramatically from one country to another, but using variables to control deployment we have managed to retain a single TS but let the child site admins have some flexibility.  As we have many small branches/agencies with no ConfigMgr infrastructure we
    had to come up with a solution which retained and reused the single TS design but also worked offline.  Standalone media is used to deploy Windows 7 to thousands of users.  Getting the local apps to install wasn't our only issue, the size
    of the media was also a problem due to the number of dependencies required to support deployment in every country (drivers, language packs, x86+x64 etc.).
    So our standalone media wizard does this:
    Reads in the collection variables (used to customise deployment, deploy apps etc.)
    Prompts the user for various options like x86/x64, HW types etc.
    Creates a copy of the global TS, the wizard then modifies the copy so that a custom TS is created dynamically just for the media.
    It disables any unwanted actions in the local TS to remove drivers, x86/x64, language packs etc.
    Adds install application actions for each of the apps specified in the dynamic app install variables.
    Prompts user for normal standalone media options like ISO, USB, Password, DPs etc.
    Creates media based on local/temporary TS.
    Deletes the local/temporary TS when complete.
    This solves the issue for zero touch deployment but does it work with UDI?  Well the answer is yes and no.  We do use UDI (but again built with the MDT UDI SDK).  Out of the box, the answer is no.  UDI brings a slightly different
    issue in that not only are the apps not referenced by the TS (so they are not in the media) but you are also then trying to dynamically change which apps are installed during deployment.  So even if the apps are directly referenced and in the media,
    you still have to develop a way of controlling which TS app install actions run based on the user selection.
    If you are willing to spend some time with the SDK then it can be done, you just may not find this worthwhile depending on the scale of your environment.
    Mark.

  • HT1846 Windows take a long time to boot up with black screen and a blinking cursor. Help anyone?

    Im running 64-bit windows 7 on my late 2012 mac mini. When it boots, it takes around few minutes to boot to windows. During the few minutes, it shows a black screen with a blinking cursor at the top left. Is there any ways to remove it and go straight to windows?

    Hello cncprogrammer,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand your HP Pavilion HPE h8-1360t Desktop computer. I am providing you with a link to a great proactive post by @Daniel_Potyrala titled How to speed up system boot time and the performance, where he offers some great advise on how to deal with the very issue you are posting about. I would advise you give it a thorough read and apply as many steps as you can to speed up your computer.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HT1918 In my billing info it doesn't give me the option to select none why? And how can I fix this?

    I can't download or update anything even if it's free. I need to update my billing info but it won't let me sleet none. Why is this and what can I do to fix it?

    Unfortunately, the G4 will only recognize a WEP password, as you have found out.  WPA will not work.

Maybe you are looking for