Option to Share or Export as 'Large' Greyed Out

I've already created several projects in iMovie and I've done quite a bit of sharing to YouTube, MobileMe Gallery and exporting to iTunes. For some reason, in my most recent project, I cannot share or export the file as 'Large 720x540'. That option is greyed out while all other sizes are still available. I've always been able to export or share with both MobileMe and iTunes as 'Large' and I can't figure out why , for this project in particular, I can't select the Large option. Any suggestions?

No, the only source I've shot with is a Panasonic standard def camera. The way iMovie imports the files, it ends up creating MPEG-2 .MOV files that are at 704x480 resolution. Every project I've created is a 4:3 project that uses the same source file format and resolution from the same source camera with iMovie always being the application that has imported the video. In every other project, I have the 'Large' option and in this one, I don't.

Similar Messages

TS1398 The wifi option on my ipod touch 3 is greyed out, how do I fix that?

The wifi option on my ipod touch 3 is greyed out. How do I fix that?

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

I just downloaded photoshop elements - have opened an existing pdf drawing - 1) I am trying to create layers; however, the option is not available? (i.e. greyed out rather than black) from the drop down menu - "layer" - "create new"? what do i do

i just downloaded photoshop elements - have opened an existing pdf drawing - 1) I am trying to create layers; however, the option is not available? (i.e. greyed out rather than black) from the drop down menu - "layer" - "create new"? what do i do

You'd better ask here:
https://forums.adobe.com/community/photoshop_elements

Export using Compressor greyed out in FCP 4.5

The hard drive in my PowerBook recently failed. It was replaced by Apple and I've restored all of my software applications from a Retrospect backup.
I originally installed FCP with installer discs that were available for me at the company, now closed, that I used to work for until December of last year. (Thus the reason for reinstalling via Retrospect.)
FCP works without any problems other than this: when I attempt to Export a project, the option to "Export Using Compressor" is greyed out in the menu. Also, I cannot launch Compressor as a standalone application.
Any ideas? I was very meticulous in restoring Frameworks and Components into their proper Library and System folders. However I must have missed something. I've read through all of the FCP discussions mentioning Compressor and didn't come across anyone with a similar problem. So it clearly must be something I haven't done correctly.
This looks like one for someone who has deep awareness of not only Compressor but software installations and their included components. I hope that someone is reading this and can offer the nugget of knowledge that will get a project back on the air...
~ Ethan

Hi Jacob,
I notice the subject of your post involves an optical Intellimouse; I'm using a wireless trackball from Kensington. I don't suspect this is the culprit, but perhaps. I'm going to post my original message in the FCP discussion list and see if anyone has any feedback to offer.
Have you installed the recent Pro Applications updates? I have, but haven't gotten a sense of whether that's caused this current problem.
~ E

"Capture Exporter XML" is greyed out

Hi all,
I am trying to migrate an Access app to APEX, using the documentation that I see in the SQL Developer help page. I am going through the steps, and so far no problems.
I am able to run the Microsoft Access Exporter, that creates the XML file, and the next step says to click on Migration, Capture Exporter XML. But when I click on Migration, the bottom 3 options are all greyed out:
- Migrate Data
- Capture Exporter XML
- Script Generation
Has anyone else seen this? Did I miss a step, to be able to click on this option?
Thanks!

OK, it looks like maybe this is helping to point out the problem - when I run sqldeveloper this way, and then I try to do the "Convert to Oracle Model", I am seeing the following errors in the command window:
Exception while performing action Convert to Oracle Model
oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: oracle.dbtools.migration.translation.api.ITranslationManager
Dependent class: oracle.dbtools.migration.convert.ConverterWorker
Loader: main:11.0
Code-Source: \C:\Oracle\SQL Developer\sqldeveloper\sqldeveloper\extensions\oracle.dbtools.migration.jar
Configuration: system property C:\Oracle\SQL Developer\sqldeveloper\sqldeveloper\extensions\oracle.dbtools.migration.jar
The missing class is not available from any code-source or loader in the system
Does this help?? There is quite a bit more below that, but I can't copy and paste from a command window. Let me know if you need to see more.

Export HTML button greyed out

i am new to captivate so please bear with me. i would like
the output of my video to be an SWF only without any html files. i
have an option called export html on my publish video screen but it
is greyed out. is this what i need to only have my output as the
SWF file? if that is what i need, how do i get it ungreyed out?
also when publishing my video is there any other formats other than
SWF? any help would be appreciated.

Welcome to our community, lorilrp1
Is the "Full Screen" option selected? If so, this is why the
Export HTML option is disabled. If this is the case, you end up
with TWO HTML files. One has _fs in the file name and is intended
to point your user at.
The only output formats are .SWF and .EXE.
Cheers... Rick

Options for recovery when 'recognize array' is greyed out?

I have an X Raid with all the slots are full with 180MB drives and it's been running as two RAID 5 arrays of 1TB. Yesterday one drive showed a red light, so I shut the system down and re-seated the drive. All seemed well and the software began rebuilding the LUN map. When I cam back to it this morning two lights were red. I shut the system down, checked all the connections and brought it back to life, one side is now not recognised as an array - all the drives are green, but listed as 'spare'. I've swapped the drives to see if the controller is at fault, but this has no effect, and 'recognize array' is greyed out as an option.
As the drives are not being seen as an array there seems to be nothing you can do - are there any further steps that can be taken, or do I just have to accept the data loss?

Hi
The same sequence of events that you describe happened at a site I support recently, unfortunately in that case you are looking at recreating the array that is listed as hot spares and recovering from your backup (you do have a backup don’t you?).
Unless someone knows differently?
As Donald has already said you don’t shut down the RAID if a drive fails or shows a degraded state. If you don’t have a spare handy act quickly and order one asap. When it arrives swap the drives and watch it rebuilding in RAID Admin. If the drive has failed or is degraded the controller will rebuild the data on that drive from the striped parity data that is stored on the other drives - that is what RAID 5 does. RAID 5 is the default configuration for XServe RAID and as such offers you one point of failure. You can configure the RAID as RAID 5 with a hot spare, this configuration offers you two points of failure. The users guide for RAID Admin has more information regarding the different types of RAID configurations that are supported and that can be used.
Tony

Why is EXPORT to Quicktime "greyed" out? GB3?

Wondering why export to quicktime is greyed out.
In addition, is there anyway to export tracks individually?
Thank you!

FWIW, I know the work around, export to iTUNES, drag to desktop (if preferences are set up right, in iTUNES) it will be a AIFF file.
Just want to know why quicktime is greyed out unless of course it needs video or images in order to work as export to quicktime!
thanks!

When Firefox starts options, 'show my windows and tabs' is greyed out??

Tools, options, general - when firefox starts
I wish to pick ' show my windows and tabs from last time' but this is greyed out??

It sounds like you may have some other settings changed that prevent Firefox from restoring your tabs and windows. Here's what to check:
#At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options
#Select the Privacy panel and make sure Firefox will: is set to either Remember history or Use custom settings for history.
#*If Firefox will: is set to Use custom settings for history then make sure that Permanent Private Browsing mode is not selected.
#*If Firefox will: is set to Use custom settings for history and Clear history when Firefox closes is selected, then click the Settings button and make sure that Browsing History is not selected.
#Click OK to close the Options window

Delete row option doesn't work and then becomes greyed out. Need help troubleshooting.

Hello!
I'm hoping that someone can please help me troubleshoot an issue I'm having with a table in my form. It has a menu associated with each row that allows you to add, delete, reset, etc. rows. The name of the table on the form is the Purchase Items table. It's the first table on the form.
Here are the steps to recreate the issue:
1. Create 3 rows in the table
2. Click the menu ("X") button associated with the first row.
3. Select "Delete this row". Nothing happens.
4. Click the menu ("X") button associated with the first row.
5. Select "Delete this row" again. Nothing happens.
6. Click the menu ("X") button associated with the first row. You'll notice that the "Delete this row" option is greyed out.
My best guess that the rows are being deleted in the background which would explain that if I have 3 rows, and "delete" 2, that my delete option is then greyed out because I believe there is logic in there such that if there is only 1 row then grey out the option to delete rows. I was planning to attach the file as I have seen others do but don't see the option. I'm happy to provide the file via email if that's easier. Thank you in advance!
Saskia

I've posted the solution here:
http://www.fieldeffecttechnologies.com/AdobeForums/PCard.pdf
The instance manager methods were being given the wrong index of the row to work with. They need to be passed the index for the row that the button you are pressing is in (of course). Instead they were given some v8b index, which I honestly cannot decipher as to what that number possibly means. (Math.round((v3-v4)*v6........)???
Anyways, I fixed it up and also changed some of the logic in the sub menu to determine what's greyed out.
I like that feature! Might even show it to a client!
Kyle

I am unable to merge events running iPhoto '11 - 9.4.2 (710.42) and Mountain Lion, 10.8.2. All options on the events down menu are greyed out and I am therefore unable to merge any events. Is there a solution?

I am unable to merge events as all drop downs in the events selection in the tool bar are greyed out. Is there a solution?

Thank you.
I tried to drag one event into another event but was unable to do so. The event that I tried to move into a second one would only move to another position in the event columnn, but it would not merge into another one.

The Export feature is greyed out

I am running the latest version of ID and Yosemite and CC 2014.1, I also had this issue with CC and Mavericks on another machine. This is completely new machine. I have DTP Tools Cloud (formerly Blatner Tools) plug-in running.
The Adobe page on export issues is of no assistance (Troubleshoot printing, PDF export | InDesign). Might anyone else have any suggestions?

First, disale the plugin and see if that's the problem.
Next try this: Replace Your Preferences

Finder issue: Compress option missing from right-click menu and greyed out in File menu

How can this be, and - more importantly - what can I do to resolve this issue? Thanks.

You mean this ThisService? Never heard of it before.
Why don't you create services using Automator (in /Applications)? That's one of the things it is designed to do. It has no problem with making sure they are properly created and installed in ~/Library/Services so that the finder can see them there under the conditions desgnated when you create them. You don't even have to log out and back in.
Note, if you like using applescript you can use applescript in automator too.

Motion 5 Share/Export Buttons Greyed out

Hi, just got Motion 5 on it's own for a project we're doing in FCP7 and for some reason all the "next" or "share" buttons in the export menus are greyed out or disabled. We've messed with a lot of settings but to no avail.
Is there something I'm missing here? There's nothing written on the Motion product page about requiring Compressor or FCP-X to export and I haven't found anyone else online with this issue.

So there's nothing I can do to get this fundamental part of the software working? It's pretty stupid if it can't save.
The only option I have to take this higher is to get Apple Care video and that's $800 for something that appears to be a bug in Motion validating an external framework. From a software design perspective, the only reason that I'd want to grey those buttons is if there were a setting in each dialog that you needed to set before you could export or you were only using a trial version and you wanted to stop people from exporting it or if the dependent framework (e.g. ProApps export manager) wasn't validated in the registry within motion.
If they throw anything else at me like you need FCPX or Compressor or Lion then that's not right either since they had no mention of that on their website when I purchased it.
This is just really frustrating!

Export Book as ePub - an order option greyed out

Hello All... so after doing some fruitless searching online and in this forum, I must ask about this problem I've run into.
I am having the same problem within ID 5.5 on Windows and ID 6 on both Mac and Windows.
What I want to do is "Export Book to EPUB..." while also using the Articles Panel ordering I've set up in the documents. I am trying to do this with several different Books, and getting the same problem when in the Export Options.
I would like to select "Same as Articles Panel" as the option for "Content Order", but it is greyed out. What is even more frustrating is that *one time* the option was selectable, and the export worked as expected. I have no idea whatsoever why InDesign allowed me that one time to select the "Same as Articles Panel" option, yet every other time I try, it is greyed out and I cannot choose that option.
Would love to hear from some experts on this one. Thanks in advance for anyone's time and effort.

Hello Steve,
I have figured out what exactly is happening. You kinda sorta steered me into the right direction. I already had everything I wanted exported as an Article, and yes with the box checked. But then I noticed something... the cover page for each book is its own document, and was also set as the Master Style Source. That was the whole key to whether or not "Same as Articles Panel" option is greyed out or selectable. If there are no Articles defined in the document which is set as Master Style Source, greyed out option. If there is an Article in that document but it isn't checked, greyed out option.
Very counter-intuitive, and I haven't seen that fact mentioned in ANYTHING I have read about Exporting, in either the internet-at-large or in Adobe's own InDesign Help.
I sincerely hope that Adobe puts this very important piece of info into their documentation.
Thanks again.

Option to Share or Export as 'Large' Greyed Out

Similar Messages

Maybe you are looking for