Options for aux and ipod connection to a 2006 Buick Rendezvous

Hello and thanks in advance for your help. 
I have a 2006 Rendezvous that I would like hardwired into the factory radio.  It has a 6 disc changer but no Monsoon enhanced system.  What options do I have?  Thanks!

Hi Pbober,
If you want to hardwire your ipod into your car, I'd really recommend stopping at your nearest Best Buy and talking to the install bay techs. I think there are a couple of options on where to put the aux connection and I'd hate to steer you in the wrong direction. Talking to the tech will be the best route to take. 
Thank you,
Marti|Social Media Specialist | Best Buy® Corporate
 Private Message

Similar Messages

  • Why is there no option for a Black ipod anymore/ I've seen the option on other websites, but this website no longer has it. And if I get the Black iPod Touch from another website, will it be old and IOS 6, because the option went away long before IOS 7

    I want a Black iPod Touch Fifth Generation, however I do not see an option for it. I have seen the option before, but it is no longer there, just like the option for a White iPod Touch. I still see the option for a Black iPod on other websites, such as Amazon. I wonder if it will not be updated and slower if I buy it from another websites that sell a Black version, because I think Apple might have eliminated that option for the iPod Touch Fifth Generation.

    No there is the option for a black iPod touch 5th Generation. However, they call it Space Gray now. It provides a black front screen and a slightly gray colored aluminum on the back.

  • Configuring PPP options for only one VPN connection

    How do you configure PPP options for only one VPN connection that is using L2TP over IPSec? The built-in VPN client in 10.4.9 is failing authentication because it won't talk MSCHAP-V2 (this is the only authentication protocol I can use) with the server. I am able to establish a connection if I add the following to /etc/ppp/options:
    refuse-eap
    refuse-pap
    refuse-chap
    refuse-mschap
    require-mschap-v2
    However, these options will affect all PPP connections. The preference file that contains the network configurations (/Library/Preferences/SystemConfiguration/preferences.plist) also contains PPP options for each specific network service. After some searching around, I found that there are several keys that seem promising (MSCHAP2, etc.). But these keys take a string value and I have no clue what they should be. These keys are defined in SCSchemaDefinitions.h file.
    Any ideas?
      Mac OS X (10.4.9)  

    Hi Brian,
    I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
    So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
    I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
    The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
    Cheers,
    Günter

  • How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

    I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
    I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
    Server 2008, and I'm running 2012.
    Any suggestions or tips on how I can begin testing this with Server 2012?

    Hi,
    You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
    If you need a sample .wcx file I have posted one here a couple of times.  If you want I will look for it and post a link.
    -TP
    I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work.  And I'm not sure what I would need to do with or how to create a .wcx file.
    When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to: 
    https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

  • In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

    In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4.  Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

    To: ~graffiti
    (This email is not intended to go on public forum -- but I wanted to respond
    to you)
    Thanks for your reply....FYI...I was trying to download from www.adobe.com on
    the specific page that has downloads of your products.    As far as the
    alternate source is concerned I am not totally sure what the capabilities it has as
    I am recovering from a hospital stay and had to send my wife to retailer to
    pick this up because I am accessing email from home until I return to work and
    need something to work now.  I don't yet have the SW.  (I would have had her
    buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
    Regards,
    Staurt Rednor ("Stu") - [email protected]
    ===========================================================
    Subj:   New message: "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader"   
    Date:   4/5/2009 7:38:17 PM Eastern Daylight Time  
    From:   [email protected]   
    Reply-to:   [email protected] 
    To: [email protected]  
    Sent from the Internet (Details)   
    SGuitar43,
    A new message was posted in the thread "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader":
    http://forums.adobe.com/message/1867664#1867664
    Author  : ~graffiti
    Profile : http://forums.adobe.com/people/~graffiti
    Message:

  • My phone number is not coming up as an option for sending and receiving imessages

    My phone number is not coming up as an option for sending and receiving imessages

    You do not have a "phone number".    Your ipad has a cellular access number and can't make phone calls. 
    You must use your apple ID email for imessage and FaceTime on iPad.

  • -1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection

    -1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection please help!!

    You can download the product from this link:
    <Download Photoshop Elements products | 13, 12, 11, 10>
    Your redemption code/Serial number will work with these downloaded products.
    Make sure you download the correct version for your operating system - Windows or Apple MAC
    Good luck.

  • How to Set NLS parameters in SqlDeveloper for current and future connection

    Hi
    I've downloaded sqldeveloper version 1.5.4(build main-5940)
    when I try to set NLS parameters as following it is thrwoing following error
    TOOLS->PREFERENCES->DATABASE-->NLS parameters
    on right side pane
    I've changed
    SORT----->BINARY_CI
    COMP----->LINGUISTIC
    then it is generating following log file
    SEVERE     43     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:ORA-00600: internal error code, arguments: [qctosop:like transform], [], [], [], [], [], [], []
    SEVERE     44     114     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     45     7     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     46     9     oracle.dbtools.db.DBUtil     
    SEVERE     47     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     48     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     49     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     50     0     oracle.dbtools.db.DBUtil     
    SEVERE     51     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     52     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     53     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     54     0     oracle.dbtools.db.DBUtil     
    SEVERE     55     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     56     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     57     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     58     0     oracle.dbtools.db.DBUtil     
    SEVERE     59     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     60     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     61     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     62     1     oracle.dbtools.db.DBUtil     
    SEVERE     63     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     64     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     65     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     66     0     oracle.dbtools.db.DBUtil     
    SEVERE     67     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     68     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     69     6     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     70     0     oracle.dbtools.db.DBUtil     
    SEVERE     71     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     72     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    please help me to set NLS parameters for current and future connections.
    thanks,
    harry

    Hi -K-
    actually I want to make SqlDeveloper to make case insensitive search.
    when I google, I've found to make oracle as case insensitive I need to set NLS_SORT to Binary_CI and NLS_COMP to LINGUISTIC
    Default SQLDEVELOPER NLSParmeters values are as NLS_SORT---->Binary and NLS_COMP--->Binary
    Now I want to make these as NLS_SORT---->Binary_CI and NLS_COMP--->LINGUISTICS.
    thanks,
    harry

  • Imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one?

    help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!

    That is your answer then.
    Large is 960x540
    Medium is 640x480 (or 720x480)
    Mobile is probably 480x272.
    It is offering you the sizes that make sense given the size of your source material.
    As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work.

  • Q. Any command-line options for Digimarc and Elements 7 batch file processing?

    Q. Any command-line options for Digimarc and Elements 7 batch file processing?

    Are you a digimarc subscriber? You would be better off asking them, if so.

  • The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.

    The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.  I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone.  I tried turning contacts for both off and on and rebooting, but it didn't help.  Any ideas?

    Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting.  You would need to check with your employer's IT department to confirm this.  You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.

  • Ihave computer and ipod connected but they will not sync. How do I get them to sync?

    I have my computer and ipod connected but they will not sync. How do I get them to sync.?  I have done the previous action before but now I have a new ipod because my other ipod was stolen.

    Actually this happened to me today and although it would not let me play the file it allowed me to use that same file i had exported from iphotos but could not play and then it allowed me to open it in imovie (you can go to import and then get it from the desktop or wherever) although I made a couple of changes to it the main thing is once you drag it into the space to begin a new project you can then right click and select open in finder and that file actually plays......if its cause i made some changes to it i.e trimmed it slightly then its worth doing so.

  • HT200259 Configuring adaptive firewall for VNC and RDP connections

    Hello, I'm using Yosemite with OSX Server.  Is there a way of configuring adaptive firewall for VNC and RDP connections?

    Apple has never documented what the adaptive firewall really does, as far as I know. It seems that the built-in network services send it some kind of notification whenever there is a connection attempt. The Screen Sharing service is one of those, so it should be protected. There is no built-in RDP service, so if you somehow added one, it would not be protected.

  • Internet connection suddenly slow for iMac but OK for iPad and iPod

    A few days ago the  WIFI internet connection on my iMac suddenly became so slow as to be unusable. However my iPad and iPod Touch on the same network still connect as normal. I have tried everything I can think of together with some ideas posted on various forums, including the following:
    Rebooting and reformating the router - a Netgear DG834G v2
    Connecting the iMac to the router via ethernet cable
    Trying different channels on the wireless network
    Altering the physical position of the router
    Using Disk Utility to repair the hard drive on the iMac
    Using Disk Utility to repair permissions on the iMac
    Disconnecting the two external hard drives (one used for Time Machine) in case they were affecting performance
    Running anti-virus software on the iMac and deleting any infected files
    Disabling the anti-virus software
    Deleting the network location on iMac and creating a new one
    Trying different DNS servers including 208.67.222.222 / 208.67.220.220 and 8.8.8.8 / 8.8.4.4
    Removing Skype from the iMac - the application my daughter was using when the connection suddenly became slow
    Trying to browse in both Safari and Firefox
    Resetting caches on the iMac
    Rebooting the iMac after trying all the above
    Swearing at the computer
    Pulling my hair out!
    None of these have made any difference. Sometimes when I reboot the iMac the first page I browse to loads reasonably quickly but then it immediately slows to a crawl again. The iPad is still connecting perfectly so I don't think it's an issue with the router.
    The iMac is a 24-inch 2.8 GHz Intel Core 2 Duo with 4 GB 800 MHz DDR2 SDRAM
    Running OS X 10.7.5
    The hard drive has a capacity of 320 GB with 62 GB free.
    I'm at my wits' end trying to sort this out and don't know what else to try.
    PLEASE HELP!

    Hi BDAqua,
    In Disk Utility the disk is listed as S.M.A.R.T. Verified and comes up with no errors when checked.
    Activity Monitor: with no other applications open Activity Monitor itself is using the greatest percentage of the CPU at approx 3%. Opening Safari and trying to load a web page initially used about 20% but immediately dropped back to less than 1%.
    Whilst trying to open the web page I noticed on the Network tab that the Data received/sec is generally between 0-20 bytes/sec, sometimes jumps to a couple of hundred bytes/sec and very occasionally peaks at about 1,000 bytes/sec. Data sent/sec is generally mirroring data received.
    Free RAM is at 2.5 GB and free disk space is just short of 63 GB (out of a total capacity of 320GB).
    In Console I am getting the following messages:
    usbmuxd: AMDeviceConnect (thread 0x100781000): could not connect to lockdown port (62078) on device 6 - d81bda1a752c658f30b839f53ca2fdb6a55f4816: 0xe8000084
    usbmuxd: _AMDevicePreflightWorker (thread 0x100781000): Pair worker could not connect to lockdownd on device 6: 0xe8000084
    com.apple.usbmuxd: stopping
    com.apple.usbmuxd: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    In the System Memory tab of Activity Monitor - Page outs : 0 bytes (0 bytes/sec)
    Thanks for your help. It's really appreciated. By the way, it's taking me forever to type all this on my iPad!

  • Setting Up iPod sync options without having the iPod connected

    Is there any way to do this, to be able to set up what will sync with my iPod, what playlists to load for instance on my nano, or onto which nano, without having it connected?
    Thanks.
    All the best,
    Tom

    You need the iPod connected to make the changes. To prevent a sync when plugging in the iPod - hold down the 'option' and the 'command' keys when plugging in the ipod - key the keys down until the iPod is listed under the Devices list in iTunes - this will prevent a sync from taking place and you will be able to change your settings.
    MJ

Maybe you are looking for