Options for blocking callers

Are there options to block a caller without them know they have been blocked!!  Thank you.

    Hello to you JeffRam,
I completely understand the option for discretion being important. At this time those who have been blocked when contacting you will hear the following message, "Welcome to Verizon Wireless. The number you were trying to reach has calling restrictions which has prevented the completion of your call." However I will ensure I pass your feedback to my leadership to see if changes can be made.
For more details on Call and Message blocking please here: http://bit.ly/Qm5Yrd
Thanks!
MelissaM_VZW
Please follow us on Twitter @VZWSupport

Similar Messages

  • Save layout option for Block Alv

    Hi,
    Small Question,
    Is there any way to enable Save layout(Ctrl+F10) option for Block ALV?As i cannot see any option to do so with Reuse_*Block like i_save in Grid and For list ALVs...FM.And its by default it is Disable.
    Any Hints?
    Cheers,
    Amit.

    That's what i already investigated(Small).
    wanted Just to confirm.Anyways thanks.
    @Gautham:I already found that link([And this also |/message/702997#702997 [original link is broken];) but thought After 2 and
    half yrs Vijay found any solution and would land with any solution as always
    Anyways Thanks Vijay And Gautham.
    Cheers,
    Amit.

  • Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

    Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft  Dear all who can really help,  Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time?  Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only"  I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts.  I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS).  And this is the only way to contact with them, because they could use Skype only in overseas.  BUT I don't need new friend from other unknow Skype member.   I keep blocked all unknow spammers in every day.  However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly.  I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever?  I appreciate if you would improve the privacy protection. Thank you very very very much. 

    Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
    No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
    What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
    If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
    Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
    thxs!
    cheers
    rOot

  • Always is the only option for block cookies...

    Has anyone come across the problem where the only option under "Block Cookies" is Always?
    The phone was working for a year and all of a sudden it got change to Always; and i cant choose any other option.
    Always is the only thing listed.

    Hmm i support exchange ; and didnt think we pushed a policy out like this, or was even capable of blocking cookies.. let me poke around and check Our EAS settings
    Update:
    I checked and there is nothing in that area that i can see..
    There are tons of values; but nothing regarding cookies
    http://technet.microsoft.com/en-us/library/bb123756(v=exchg.141).aspx
    Update 2:
    I did a general\reset\ reset all settings , no change

  • HT2589 My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? Ps my friends here has such a proble

    My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? I have many apps on my account but I can't do even updating.  Ps my friends here has such a problem too

    Ukraine is there. It's been there for a while. I even see it now.

  • Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

    Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
    It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

    The easiest thing to start with is to reset the Eraser Tool.
    Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

  • "Block EDIT option*" for all WEBI Reports with Administrator Account

    Hi,
    I had opening CMC with Administrator Account.Due to some reasons i want to "Block EDIT option" for all WEBI Reports.Just Viewing is sufficient.In the same way for Universe"Blocking EDIT object option".Instead of Administrator guide reference (chap no 18 &19)option.Could you help in steps resolving issue.Thanks in advance.
    Regards,
    Swapna.

    Hi Swapna,
    You could perform the following steps:
    1. Login to CMC.
    2. Go to Folders >> Manage >> Top Level Security
    3. Click on Add Principal and add the user or group for which you have to set the security.
    4. Click on assign Security >> Advanced tab >> Add/Remove Rights.
    5. Select Content >> Web Intelligence Report
    6. assignt "Edit Object" right as denied and click on apply ok.
    This would help you to block edit option for only webi reports and all the webi reports in your environment.
    Regards,
    Nakul

  • How do I disable "Exceptions" button for "Block pop-up windows" in Content tab?. I am able to Disable other Exception buttons in this tab using about:config preference.

    Need a way to disable "Exception" button for "Block Pop-up windows" in Tools-> Options -> Content tab. I want to be able to do this for Locking Down Firefox preferences.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    That button doesn't have a pref associated with it, so you can't disable that button with a pref on the about:config page or a lockPref call.
    That only leaves the choice to remove that button with code in userChrome.css
    <pre><nowiki>#popupPolicyButton {display:none!important;}</nowiki></pre>
    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  • NO-DISPLAY option for Radio buttons

    Hi All,
    I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
    my question was is it possible to use NO-DISPLAY option with radio buttons?
    Thanks
    Kumar.

    See this sample code
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
    *Radio button for Process PO invoice
    PARAMETERS :   rb_po   RADIOBUTTON GROUP inv USER-COMMAND rad.
    " PO Invoice
    *Radio button for FI Invoice
    PARAMETERS :   rb_fi   RADIOBUTTON GROUP inv.
    " FI Invoice
    *Radio button for Process PO & FI Invoice
    PARAMETERS :     rb_pofi   RADIOBUTTON GROUP inv.
    " PO & FI Invoice
    SELECTION-SCREEN END OF BLOCK b3.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    SELECT-OPTIONS:
                    s_bukrs   FOR  rbkp-bukrs,       "Company Code
                    s_ekorg   FOR  ekko-ekorg NO INTERVALS MODIF ID md2,
                                                 "Purchasing Org.
                s_ekgrp   FOR  ekko-ekgrp NO INTERVALS MODIF ID md2,
                                                     "Purchasing Group
                s_werks   FOR  rseg-werks NO INTERVALS MODIF ID md2,
                                           "Plant
                    s_lifnr   FOR  rbkp-lifnr NO INTERVALS,
                                                     "Vendor
                s_matkl   FOR  ekpo-matkl NO INTERVALS
                                              MODIF ID md1,
                                                     "Material Group
                s_belnr   FOR  rbkp-belnr NO INTERVALS,
                                                     "Invoice Number
                    s_ebeln   FOR  rseg-ebeln NO INTERVALS MODIF ID md2,
                                                     "Purchasing Document No
                    s_gjahr   FOR  rbkp-gjahr NO INTERVALS,
                                                    "Fiscal year
                s_budat   FOR  rbkp-budat NO INTERVALS,
                                                    "Posting date
                    s_blart   FOR  bkpf-blart NO INTERVALS,
                                                    " Document Type
                    s_bldat   FOR  bkpf-bldat NO INTERVALS,
                                                    " Invoice Date
                s_usnam   FOR  rbkp-usnam NO INTERVALS.
    "User
    *Report type
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    SELECTION-SCREEN BEGIN OF LINE.
    *Radio button for User Report
    PARAMETERS :     rb_user  RADIOBUTTON GROUP za DEFAULT 'X' <b>USER-COMMAND rad MODIF ID md2.</b>"User report
    SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    *Radio button for Managing Report
    PARAMETERS :     rb_man   RADIOBUTTON GROUP za
                                          <b>MODIF ID md2.</b>
    "Management Report
    SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
                                            MODIF ID md2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END  OF BLOCK b2.
    SELECTION-SCREEN END  OF BLOCK b1.
    AT SELECTION-SCREEN OUTPUT.
    * Checking Radiobuttons and modifing Material Group field  .
      PERFORM f13000_check_radio.
    FORM f13000_check_radio.
    * When the FI button is selected hide the fields under group md1 and MD2
      LOOP AT SCREEN.
        IF screen-group1 = 'MD2'
        OR screen-group1 = 'MD1'.
          IF rb_fi  = c_x
          OR rb_pofi = c_x.
            screen-active = 0.
          ELSE.
            screen-active = 1.
          ENDIF.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    * If the user output radiobutton is checked then make the screen
    * input of Material Group off
    <b>  LOOP AT SCREEN.
        IF screen-group1 = 'MD1'.
          IF rb_user = 'X'.
            screen-active = 0.
          ELSE.
            screen-active = 1.
          ENDIF.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.</b>
      IF rb_user = 'X'.
    *   When display for material group is off
    *   then refresh the select option for material
    *   group
        REFRESH s_matkl.
      ENDIF.
    ENDFORM.      " f13000_check_radio
    hope this helps.

  • Mount options for ZFS filesystem on Solaris 10

    Do you know some recomendation
    about mount options for SAP on Oracle
    with data on ZFS filesystem?
    Also recomended block size required.
    We assume that file system with datafiles has 8kb block size
    and offline redologs has default (128kB).
    But what about ONLINE REDOLOGS?
    Best regards
    Andy

    SUN Czech installed new production HW for one Czech customer with ZFS filesystem on data-, redo- and archivelog files.
    Now we have performance problem and currently there is no SAP recomendation
    for ZFS file system.
    The HW which are by benchmark about tvice power has worst responses than
    old hardware.
    a) There is bug in Solaris 10 - ZFS buffers once allocated are not released
        (generally we do not want to use buffering due to prevence of double
         buffering)
    b) ZFS buffers takes about 20GB (32GB total) of memory on DB server
    and we are not able to define huge shared pool and db cache. (it may be possible
    to set special parameter in /etc/system to reduce maximum size of ZFS buffers to e.g. 4GB )
    c) We are looking for proven mount option for ZFS to enable asynchronious/concurent io for database filesystems
    d) There is no proven clear answer for support of ZFS/SOLARIS/Oracle/SAP.
    SAP says It is Oracle problem, Oracle does not certify filesystems from Jan2007
    any more and says ask your OS provider and SUN looks happy, but performance
    goes down and it is not so funny for system with 1TG DB with over 30GB grow
    per month.
    Andy

  • Validation of Select Options for a field

    Hi All,
    I need to write a validation logic for a select option for VTWEG (Distribution Channel).
    select-options:  s_vtweg for komg-vtweg.
    I need to check whether the user has entered the correct value based on the search help. The check table of this particular field is TVTW. 
    Following is the code i wrote under the AT SELECTION-SCREEN block:
    IF NOT S_VTWEG-LOW IS INITIAL.
    SELECT SINGLE VTWEG INTO KOMG-VTWEG FROM TVTW
                                     WHERE VTWEG IN S_VTWEG.
    IF SY-SUBRC NE 0.
    CONCATENATE ' Please enter the correct
                                    Distribution Channel '
    Z_MSG INTO Z_MSG.
    SET CURSOR FIELD 'S_VTWEG-LOW'.
    MESSAGE E000 WITH Z_MSG.
    ENDIF.
    ENDIF.
    It works fine when the user enters a wrong value in the S_VTWEG-LOW field, where as if i gives more than one wrong value in the range or giving individual values its not working. Let me know how to do the validation check for multiple values entered individually or in ranges.
    Could you please suggest how to resolve this problem.
    Thank You,
    Suresh

    You could do something like this.....here looping at the select-option table and check the values for low and high.
    report zrich_0003.
    tables: komg.
    data: z_msg(100) type c.
    select-options: s_vtweg for komg-vtweg.
    at selection-screen.
      loop at s_vtweg.
        if not s_vtweg-low is initial.
          select single vtweg into komg-vtweg from tvtw
                 where vtweg = s_vtweg-low.
          if sy-subrc ne 0.
            concatenate ' Please enter the correct
            distribution channel '
                      z_msg into z_msg.
            set cursor field 'S_VTWEG-LOW'.
            message e001(00) with z_msg.
          endif.
        endif.
        if not s_vtweg-high is initial.
          select single vtweg into komg-vtweg from tvtw
                 where vtweg = s_vtweg-high.
          if sy-subrc ne 0.
            concatenate ' Please enter the correct
            distribution channel '
                      z_msg into z_msg.
            set cursor field 'S_VTWEG-HIGH'.
            message e001(00) with z_msg.
          endif.
        endif.
      endloop.
    Regards,
    Rich Heilman

  • Block callers

    How to block callers on my iphone

    This problem is easy to resolv, and lots of apps can do call blocking, but Apple for some reason dont allow Them In AppStore. Apple defenately know this, and should free the apps In AppStore that can help their customers. They dont have to create an app, just realease the apps that have existed for years and are working perfectly.
    <Edited By Host>

  • Need reasons for blocking Purchase requisition and service entry sheet.

    Hi All,
    I need reasons for blocking service entry sheet and purchase requisition.
    Also want the reasons for reversing the approval of service entry sheet.
    Its urgent ......

    Hi Nilesh,
    It is not possible to block a service entry sheet as such. You could only revoke a service entry sheet. Some of the possible reasons are, you are not satisfied with the quality of service provided by the vendor. Or it could also be due to change in the services to be performed or it could even be as simple as erronous entry of services in the entry sheet.
    However from ERP 2005, it should be possible to return the services by marking the returns indicator.In case of materials, it is possible to put a materials PO on hold. But in case of services, the hold option does not arise as a service cannot be performed/completed till all the approvals are received.
    Hope this answer helps you.

  • Customizing Publish Options for Word Doc

    Are there any additional publish customization options for Word doc? I checked the options available, and I didnt find any feature that allows you, for example, to manipulate slide images ( like, size and position), slide notes ( fonts and placement), etc. It takes so much time to reformat images and notes for each slide. Any suggestions?
    Thanks,

    The handout template is hard coded. But, working with the other templates and the Word Output document, I was able to create a template that will allow you to publish the Word images and slide notes in Word. And, you can customize the placement on the page and image sizes.
    Here are instructions (I'm using Captivate 6 BTW):
    1. Make all of your slide notes into closed captioning.
    I was able to find the computer code to call the closed captions, but not the slide notes. So you have to drop some audio onto each slide (I'm using 1 second of silence generated in Audacity) and click the button that will turn your slide notes into closed captions. Don't worry...these won't display in your published project unless you have your skin set to display them.
    2. Open a new Word document.
    3. Copy and paste the script below into your Word document. This script as is will print 2 slides per page with slide notes above the images.
    [CPDefaultItemTemplates[CPTemplates[TIMEBLOCK[CPContentInsert]TIMEBLOCK]CPTemplates]CPDefa ultItemTemplates]
    [CPCapturedSlide
    [CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
    [CCN[CPCC]CCN]CPTemplates]
    [CPSlideImage][size:282x214]
    CPCapturedSlide]
    [CPContentSlide
    [CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
    [CCN[CPCC]CCN]CPTemplates]
    [CPSlideImage][size:282x214]
    CPContentSlide]
    4. Adjust the script to your liking:
    1. Change the image size. This is set to 282 x 214. But you can change the image size to whatever you want it to be. If you make the size larger, fewer will fit on a page.
    2. Move the slide notes, if you want. This is set to put the slide notes above the images. To put the notes below the images, move the [CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
    [CCN[CPCC]CCN]CPTemplates] to below [CPSlideImage][size:282x214]. Be sure to move both instances, and don't copy/paste...move!
    3. Use Word's formatting options to change the page display. For example, if you use Word to center the code about slide images, the slides will be centered on the page when you publish. You can add your company's logo in the header. Type CPMovieTitle into one place to print the project title...either header or footer. It won't work if you put it in more than one place for reasons known only to Captivate. You can put page numbers or dates in the footer. You can change the font for the slide notes by highlighting the notes code (see #3 above) and making it larger, smaller, different, bold, italic, etc., etc., etc. Whatever you would do with Word to format your handouts, do in this document.
    4. Add anything that you want to print on every page outside the [ ] blocks. For instance, if you want to blank lines to print under the notes, you can add before the code for the images.
    5. Save the Word document in .doc format with a memorable name where you can find it. You don't have to save with the templates in the Captivate program file.
    6. Publish to Print. In the upper, right corner, in the Type section, click the button with ... It's to the right of Handout. That will open a window which will allow you to browse to find and select your Word document. The Layout Options won't do anything, so no need to mess with them. Set the rest of your settings...like project title and publish location and publish.
    Things that I don't know, but would like to:
    1. Will this work in Captivate 7? Will someone try and let us know?
    2. Can you save the Word file in .docx format?
    3. Can you set the Word doc to landscape instead of portrait? (I'll bet that you can, but haven't tried it.)
    4. What Word options won't work? I know that you can't put this code inside a Word table. Using column and page breaks, I got mine to print with the slide notes on the left and images on the right. Other than that, who knows? Word is a big program, so you'll just have to test.
    5. What is the code to call the slide notes? I've called Adobe support twice and can't get a straight answer. If we all start calling and emailing, maybe they'll tell us.
    So, I hope this helps. There are so many threads about this and I can't repost everywhere. So, please link to this thread if you see another one where this info will help.
    Happy printing!
    Rebecca

  • ORA-03217: invalid option for alter of TEMPORARY TABLESPACE

    Hi all
    I have a database with 300 Users approximantely.
    Suddenly I was reported about slowly connection and looked to my database. And I saw that Temporary tablespace with name MUVTEMP is 0% used and in it there is no .dbf file
    Then I do ls on my data files directory and saw there MUVTEMP01.dbf!
    But it's not using it. Then I want to add another .dbf file. It created this file physically but not joined it to my temporary tablespace.
    Then I did it with Oracle EM, clicked on "Show SQL" and there was written
    ALTER TABLESPACE "MUVTEMP"
    ADD
    DATAFILE '/home/oracle/OraHome1/oradata/linux/test.dbf' SIZE
    5M
    I run it from EM it gave this error
    ORA-03217: invalid option for alter of TEMPORARY TABLESPACE
    Then I run this SQL in sqlplus
    ALTER TABLESPACE "MUVTEMP"
    ADD
    TEMPFILE '/home/oracle/OraHome1/oradata/linux/test.dbf' SIZE
    5M
    it created file physically, but I can't see this file as temporary tablespace's file. It's not using....
    Where is my mistake???
    Thanks...

    Hi,
    try this query:
    select s.sid || ',' || s.serial# sid, s.username, u.tablespace, substr(a.sql_text, 1, (instr(a.sql_text, ' ')-1)) sql_text,
      round(((u.blocks*p.value)/1024/1024),2) size_mb
    from v$sort_usage u, v$session s, v$sqlarea a, v$parameter p
    where s.saddr = u.session_addr
      and a.address (+) = s.sql_address
      and a.hash_value (+) = s.sql_hash_value
      and p.name = 'db_block_size'
    group by s.sid || ',' || s.serial#, s.username, substr(a.sql_text, 1, (instr(a.sql_text, ' ')-1)), u.tablespace, round(((u.blocks*p.value)/1024/1024),2);

Maybe you are looking for