Options for File Share

I have a px12 device, and i am looking into migrating data over to this device. the question i have is what is the best way to access the new location to turn this into my file server.
our px12 device is going to be in a central hosted location, and we access files from a Terminal Server, through VPNs, and through Remote Web Workplace.
I have setup an iSCSI the perfomance is great, but it is tied to one server, and that is not what i am looking for. We can do the standard Network share, but the speed on transfers is not the best.
Is there any options between netwrok share and iSCSI that gives good performance on speed?

NFS has the same speed as ISCSI and can connect from the different location you menitioned. NFS is cumbersome when it comes to connecting to Windows. We would not be able to walk you through setting up NFS but if your IT department is familar with it, most likely would work better than ISCSI.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

The new iTunes update gives me no option for a "share" tab on the side bar for me to play home shared music. why? please help i need to listen to beyonce!! plzzz

The new iTunes update gives me no option for a "share" tab on the side bar for me to play home shared music. why? please help i need to listen to beyonce!! plzzz

"share tab on the side bar ..."
iTunes has not had a sidebar for over a year. You can see one (as iTunes 10 used to show) by doing View > Show Sidebar from iTunes' menu.
But I'm not sure if that is your issue. You do not need a sidebar to do home sharing. Are you running the current iTunes (11.1.3)? Have you turned on sharing in Preferences? Have you done File > Turn on Home Sharing?

I do not have a delete option for files or folders in Adobe Creative Cloud

I do not have a delete option for files or folders in Adobe Creative Cloud
im looking and looking....
im stumped.....
4 weeks now....
kai

HOW TO DELETE FILES or FOLDERS or Assets from Adobe Creative Cloud Brouser/Web Portal By: Kai Buskirk rev:130626
Adobe now burried deleting or trashing unwanted iteams files or folders in the Archive section of your creative cloud brouser/web portal.
Note!! - No longeer is there a standard TrashCan icon or simple Delete button... its burried in the archive sector: but why i ask?
An archive is an accumulation of historical records, or the physical place they are located.[1] Archives contain primary source documents that have accumulated over the course of an individual or organization's lifetime, and are kept to show the function of that person or organization. Professional archivists and historians generally understand archives to be records that have been naturally and necessarily generated as a product of regular legal, commercial, administrative or social activities.
In general, archives consist of records that have been selected for permanent or long-term preservation on grounds of their enduring cultural, historical, or evidentiary value. Archival records are normally unpublished and almost always unique, unlike books or magazines for which many identical copies exist. This means that archives (the places) are quite distinct from libraries with regard to their functions and organization, although archival collections can often be found within library buildings
A person who works in archives is called an archivist. The study and practice of organizing, preserving, and providing access to information and materials in archives is called archival science. The physical place of storage is sometimes referred to as an archive repository.
To delete files folders or individual assests in the current incarnation of adobe creative cloud brouser/web portal rev:130626
1 - Check mark the box on left and select files or folders you would like Deleted/Trashed and move them to the ARCHIVE folder location inside your adobe creative cloud brouser/web portal....Then navigate to the ARCHIVE SECTION
2 - Once the files or folders you have check marked are moved to the ARCHIVE folder location you can select them for Permanant Deletion (Trash)
ps: you can also restore them......if you so choose....
3 - in case you missed this step after selecting/checking the files or folders in the ARCHIVE folder there is a small Triangle Selector drop down that will reviel the Permanently Delete option.... clicking that is the point of no return i think..... so do not be misled my the use of the term ARCHIVE.... DELETING PERMANANTLY IS DELETING YO!
4 - OK DONE NOW YOU GOT IT .....
Good Luck Happy House Cleaning.....
Wamest Blessings,
Kai Buskirk
Message was edited by: [email protected] rev: 130626

Please add options for file names on camera or PlayMemories import (ie: 00001 DateTaken DSC)

Please add options for file names on camera or PlayMemories import (ie: 00001 DateTaken DSC= 00001 2014_10_21 DSC )

if(!getNewContactsName())
               createNew();
               return;
          if(!getNewContactsSurname())
               createNew();
               return;
          String checkName = newName;
          String checkSurname = newSurname;
          if(!checkIfDuplicate(checkName,checkSurname))
               createNew();
               return;
          if(!getNewContactsHomeNum())
               createNew();
               return;
          if(!getNewContactsWorkNum())
               createNew();
               return;
          if(!getNewContactsCellNum())
               createNew();
               return;
          if(!checkAtLeastOneNumEntered(newHome, newWork, newCell))
               createNew();
               return;
          }This can all be done in 1 if statement just use the or operator (||) will save some room
private void deleteFromList(String nameOfContact, String surnameOfContact)
     {//Start of deleteFromList()
          int confirm = JOptionPane.showConfirmDialog(null,"Are you sure you wish to delete the contact from the phonebook?","Please confirm",JOptionPane.YES_NO_OPTION);
          if(confirm == JOptionPane.NO_OPTION)
               return;
          elseWhy do you have a return statement in a void method? there's no need for this you can cut out the no part and just keep the yes

URM 11g adapter for File Share

Hi All,
Has anyone tried to setup a URM 11g adapter for File Share/system. I could not get any documentation on this for 11g. There is 10g documentation which I tried but could not proceed much. If someone could point to an admin guide for 11g adapter that would be of great help.
Thanks,
- Anand

10g adapters work with 11g as well!
- Sudha

Sequence Number By Date Option For File Naming

I would like to see Lightroom have the option to have the sequence numbers be reset when the date changes and increment accordingly. For example, I have the file naming set to use Date (YYYYMMDD) Sequence Number (0001) and the sequence number starting at 1. As Lightroom is now I will end up with 200909010001, 200909010002, 200909020003, 200909020004, 200909030005 200909030006 etc. and what I would like to see is the option for 200909010001, 200909010002, 200909020001, 200909020002, 200909030001 200909030002.
This would make it much faster for renaming or import when using this combination of date and sequence in file names.

Hi
For the Transport Protocol "File Transfer Protocol (FTP)" files are always processed in ascending alphabetical order
If you want the file to be processed in sequence then you can use Quality of Service EOIO in the sender adapter.
The files are processed in the sequence they are picked up.
otherwise use BPM for File Sequencing..
Refer the following Threads
FTP Sender Adapter - Processing Sequence
Processing Sequence issue of FTP protocol
Regards
Abhijit
Edited by: Abhijit Bolakhe on Nov 4, 2009 10:32 AM

NIC configuration for File Share Witness server

Best practices for a DAG is segment the MAPI or production network and the replication network. On the mailbox servers that are members of a DAG, we have two NICs that are configured differently.
What about the server with the File Share Witness (in my case, we are using a file server, there is not an extra Hub Transport server available).
Should this server be configured for two networks as well?
I'm thinking that the heartbeat traffic would be on the replication network? Or not?
I've read numerous documentation on the subject (Technet, MSExchange, ExchangeServerPro, SimpleTalk, etc..) and have never noticed a section about configuring dual NICs on the FSW server. Which leads me to think... that it is actually the "regular"
NIC that is used.
Can anyone confirm that?
Thanks in advance!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Right, FSW server doesn't need multiple NICs... FSW server is to just give a vote when you have even number of DAG members to make majority. Exchange is going to just lock a small file on the FSW server on the Witness directory, that is all...

Best option for file storage

I want to archive some of my CAD files and other files on a 'by year' basis. Is a flash drive a good option? They seem neat but then again they are a bit small & could get lost. Any ideas on the best option these days?

A 2.5" external hard drive will hold MUCH more and still fit in a shirt pocket should you choose. Lots of storage for a reasonable price. Remember to make backups of whatever meda you choose. You don't want your files to be in just one place.

Technical design options for File to File scenario

Dear all,
I need some inputs on the below requirement.
SAP BW system has to send some reporting data to one of the end systems.
1. What are the ways of interfacing between SAP BW and SAP XI. (I mean RFC, IDOC or File based mechanism)
2. The proposed way was File mechanism, BW producing a file and XI picking it up and sending it to the target system.
3. The file size of 1GB, can XI handle such huge amount of data. What is the maximum file size which XI can handle.
4. We need to archive the data after it has been transmitted to the receiver.
    1) Do we have any standard way of archiving in XI.How long will the messages be stored in XI.
    2) For any extra archival period, do we need to any configuration.
Please provide your inputs in finalizing this design.
Regards,
Younus

Hi,
>1. What are the ways of interfacing between SAP BW and SAP XI. (I mean RFC, IDOC or File based >mechanism)
You can Try Proxy to send the message from BW to PI
>2. The proposed way was File mechanism, BW producing a file and XI picking it up and sending it to >the target system.
    Is the Desicison made to go ahead with File
>3. The file size of 1GB, can XI handle such huge amount of data. What is the maximum file size which >XI can handle.
    The file size depends upon the Hardware ofthe system, If you Chunk and send the message that will be cool
> 4. We need to archive the data after it has been transmitted to the receiver.
As per your Requirement, As a default the messages processed in PI will be stored for 30 days.
> 1) Do we have any standard way of archiving in XI.How long will the messages be stored in XI.
    As a default the messages processed in PI will be stored for 30 days. You can Configure for more days
>2) For any extra archival period, do we need to any configuration.
    Yes, Default is 30 days.
Cheers
Agasthuri Doss

Options for file conversion

Hello,
I'm having difficulty putting old presets (CS5.5), the new version (CS6).
I downloaded the trial version, but only came fourth file conversion options, among them F4V, FLV, H.264 and MP3. Where did all the other options (MPG, AIFF, M2V and many others)??
I hope someone has a solution. Thank you!

AME gets installed through a host application. You probably got AME CS6 by installing Flash CS6? If so, Flash Pro or Design applications only support limited set of codecs/formats. If you install Production Premium and launch Premiere Pro, then go back to AME, you will get all supported formats.

Connecting to PC"s for file shares with SL

I am not able to connect to my PC thru the network 1/2 the time it does not even see the PC but the PC sees it fine if it sees the PC it can't connect. but if I boot into 10.5 off of my USB HDD I can connect just fine to the PC and get to the files. it is pretty frustrating SL is faster but some things just don't work the way they should

Can you give some more information about the LaCie drive and the computer? How big is the drive? What interface is it (i.e. USB, FireWire, etc.)? What are the specs of the G4?

Publish+Share best option for fast action AVI 1920x1080 29.97?

I want to play my movie on an HDTV from my laptop or USB drive. What is the best option for Publish+Share?
I don't need to preserve layers for future re-edits and smaller file size is better but not if it's at the expense of playback quality.
Should I choose Computer or Disk? Pros and cons?
Should I choose MPEG or AVCHD? Pros and cons?
Which version of 1080? Pros and cons?
Is there a detailed listing of the Publish+Share options?

Seems like there are 4 "best options" - can anyone advise further?
SubCat
Option
File Type
Frame Size
Frame Rate
Audio Setting
MPEG
MPEG2 1920 x 1080i 30
MPEG2 Blu-ray
1920 x 1080
29.97
Dolby Digital, 192 kbps, 48 kHz
MPEG
HDTV 1080p 29.97 High Quality
MPEG2
1920 x 1080
29.97
MPEG, 384 kbps, 48 kHz, 16 bit, Stereo
AVCHD
M2T - H.264 1920 x 1080i 30
H.264 Blu-ray
1920 x 1080
29.97
Dolby Digital, 192 kbps, 48 kHz
AVCHD
MP4 - H.264 1920 x 1080p 30
H.264
1920 x 1080
29.97
AAC, 160 kbps, 48 kHz, Stereo

An impersonation error occurred using the security context of the current user. -- Report server is on remote server and file share folder is on local server

I have deployed a report on the server (e.g. remoteserver\reports) from my local machine. I opened the report in browser in my local machine and created a new subscription with windows file share delivery option.
But its giving an error "Failure writing file \\localserver\subscriptions\Report1.xls : An impersonation error occurred using the security context of the current user." Here "subscriptions"
is the folder which I have created in my local machine.
I followed the instructions found in the link "http://msdn.microsoft.com/en-us/library/ms157386.aspx"
Please help to solve this issue.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

File Share crawl - NetApp Servers - Permission Issues

hello,
There are many file share contents hosted on NetApp, which are being crawled by the SharePoint 2013 Search engine in our organization.
The Search Crawl account is granted Read and Execute permissions on the Shared Drive. The crawler reads the content and the permissions correctly for the first time.
But once the permissions are modified, like adding new users or removing the existing users, and after triggering a full crawl, the changes w.r.t permissions are not being reflected on the sharepoint search results. However, the same scenario works fine
on a local windows shared drive.
I have learnt that the crawl account should be a part of the group policy Manage Audting and permissions, but also learnt that NetApp doesnt have such a thing. I hope am not the only one with such an issue. Please suggest.
Sreeharsha Alagani | MCTS Sharepoint 2010 |
Linkedin | Blog

Hi Sreeharsha,
As I understand, you are using NetApp for file share, and you would like to know about permission needed for crawl files.
Since the issue is related to third party product, there is no sufficient resource here. Please contact their support engineer. For your convenience:
https://communities.netapp.com/welcome
In addition, I found some articles might help:
https://communities.netapp.com/community/netapp-blogs/msenviro/blog/2013/10/30/best-practices-for-sharepoint-2013-search-service-application-for-smsp
https://kb.netapp.com/support/index?page=content&id=3013718&pmv=print&impressions=false
Regards,
Rebecca Tu
TechNet Community Support

IMac file share with an Imerge s3000 server.

I cannot get ny mac to connect with an Imerge s3000 music server. I can operate the system through the mac using the TV interface but I cannot share files. The server is recognised by the mac on the network but each time I try to access the files it reports connection failed. I need to access the files for backup and storing downloaded music. I have followed all the instrctions but all goes well until the last step of opening the files.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

Options for File Share

Similar Messages

Maybe you are looking for