Options for modeling massterdata attributes which can have multiple values

Hallo All BW Experts!
here is a modelling requirement which i find quite interesting and challenging.
How can we use attributes for a masterdata which can have multiplevalues. Currently these kind of attributes are stored in seperate ODS. One example for such a requirement might be the Busines Partner groupes. Each Business partner can be in more than one group.
my question is , How can we modell such kind of masterdata model which enables us to use these attributes for restrictions in reporting from various independent infoproviders. Main problem is due to the condition that the no of such groups per each user is not fixed and can be changed in runtime.
any suggession will be rewarded.
with regards
ashwin

Hi Arun!
Is there any possiblily to create such a model in BW which is flexible. One option might be to use a heirarchy. Actually the requirement looks like this. We must be able to analyse all businesspartner data and with that data we will be able to group the customers into various target groups. now we want to anyalyse the performance of such target grouops in past time.
to be simple
1) it is possible to create customer groups based on masterdata charecteristics.(there is lot of facilitiey available in BW3.5 and more in 7.0 for this) this is very dynamic
2) Now is it in anyway possible to analayse the performance of such a group. I think currently heirarchies serve such purpose but small limitation in SAP is that they must not contain more than 100000 records otherwise the performance is siverly limited.
any suggestion
with regards
ashwin

Similar Messages

Options for Displaying Reference Attribute in AdvancedTable Record

Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank you

If UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly.

Caller ID setup for a LAND LINE, which can NOT rec...

Issue: Caller ID setup for a LAND LINE, which can NOT receive a mobile SMS text to verify it.
The office phone (land line) I need to setup as the Caller ID for outbound Skype calls is not able to receive mobile text messages your automated verification system is sending to verify it. I do recall there was a process in place that the verification system would actually call the phone number and I would then input a code provided from Skype's Verification page.
Thank you in advance.

mrwireless wrote:
Issue: Caller ID setup for a LAND LINE, which can NOT receive a mobile SMS text to verify it.
The office phone (land line) I need to setup as the Caller ID for outbound Skype calls is not able to receive mobile text messages your automated verification system is sending to verify it. I do recall there was a process in place that the verification system would actually call the phone number and I would then input a code provided from Skype's Verification page.
Thank you in advance.
I just checked this for myself. Unfortunately, there is no option for Skype to use a landline number for the Caller ID with a Skype account. You can use an Online Number from certain countries (i.e., USA and UK are two countries where an Online Number can be used for Caller ID) or a mobile phone.
I have been on Skype for over 4 years, and have never seen the option to use a landline number for Caller ID with a Skype account. It may have been in place further in the past, but not anymore.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

Here's what I do. My wife and I each have an iPhone. We each have our own Apple ID. I also have another totally separate Apple ID. The ONLY thing that one has been used for was to set up Find my iPhone for our phones and my iPad. There is no reason the MobileMe setting for find my iphone can't be something completely different from your regular Apple ID UNLESS you already use MobileMe, in which case the 2 conflict in ways I don't understand as I don't subscribe to it.

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

Thank you William for your most helpful response. I shall deal first with your three comments:
Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
I have updated my profiles as you suggest. Excellent tip.
This guidance is good. Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make. Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
The answer is “yes”. Two events have happened both of which concerned the Time Capsule:
The telephone company, with which I have access to the Internet and I have my email account, installed a new modum. After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance. The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule.
Access to the Internet failed and the telephone company reset the modum. I had to call Apple again. This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site” (not the Time Capsule).
Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup. Everything appears to be in order. When I enter the Time Capsule for this laptop I have backups going back for a long time.
Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software. So I have another backup of both computers.

HT1446 I need to order a replacement battery for Model A1185. Where can I get it?

I need to order a replacement battery for Model A1185. Where can I get one?

You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
I've bought used MacBooks off of eBay for my family, nine of them so far over the last 6 years. I've bought 8 batteries off of eBay sellers, just going with the cheapest. Only had one with a problem, it gave out after 6 cycles. That one was replaced under the warranty by the seller. The only other batteries that have been a problem were Apple branded batteries that started bulging. I've had two of those happen.

HT4623 I haven't got an option for software update? How can I update my ipad2

I haven't got an option for software update? How can I update my ipad2 to ios5.1

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Looking for a Powershell Script which can put the scom servers in maintenance mode

Looking for a Powershell Script which can put the scom servers in maintenance mode so that SCOM should not send an alert during planned task.
Rahul

1. Provide list of servers line-by-line in C:\ServerList.txt, make sure you provide limited no. of servers, do not exceed 20 - 25 per batch
2. Save the script with suitable name (test.ps1)
3. Open PowerShell cmd prompt
4. Script accepts 3 params - TimeInMinutes, Reason and Comment
**** Please note, this script will work for SCOM 2012 R2
param([int32]$TimeMin, [string]$Reason, [string]$Comment)
try
$api = new-object -comObject 'MOM.ScriptAPI'
Import-Module operationsmanager
New-SCOMManagementGroupConnection
$Servers = Get-Content "C:\ServerList.txt"
$Time = (Get-Date).Addminutes($TimeMin)
Foreach ($Server in $Servers)
#Get Computer instance
$ComputerClass = Get-SCOMClass -Name Microsoft.Windows.Computer
$ComputerClassInstance = Get-SCOMClassInstance -Class $ComputerClass | Where {$_.DisplayName -eq $Server}
If ($ComputerClassInstance -ne $Null)
$HealthServiceWatcherClass = Get-SCOMClass -name:Microsoft.SystemCenter.HealthServiceWatcher
#Get Health Service Watcher Class instance of the server
$HSWClass = Get-SCOMClass -Name Microsoft.SystemCenter.HealthServiceWatcher
$HSWClassIns = Get-SCOMClassInstance -Class $HSWClass | Where {$_.DisplayName -eq $Server}
#Starting the maintenance mode
Start-SCOMMaintenanceMode -Instance $HSWClassIns -EndTime $Time -Reason $Reason -Comment $Comment
Start-SCOMMaintenanceMode -Instance $ComputerClassInstance -EndTime $Time -Reason $Reason -Comment $Comment
Write-Host "Health Service Watcher and Agent server "$Server " kept in maintenance mode" -foregroundcolor "green"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 200, 0, "$Server kept in maintenance mode for $TimeMin minutes")
Else
Write-Host $Server" not found " -foregroundcolor "red"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, "$Server could not be found in domain")
Catch [system.exception]
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, $_.Exception.Message)
Faizan

I have an old version Adobe Creative Suite 3 Design Premium. I uninstalled it from my old computer and was trying to install it on my new computer. It copied all the files but I cant open them and it doesn't ask me for my registration info, which I have.

I have an old version Adobe Creative Suite 3 Design Premium. I uninstalled it from my old computer and was trying to install it on my new computer. It copied all the files but I cant open them and it doesn't ask me for my registration info, which I have. What shall I do to get Adobe up and running?

when you were install your cs3 you should have been prompted for you serial number. were you?
if not, you probably didn't properly install cs3. copying/migrating/moving etc is problematic.
if yes, did you see any error messages during installation?
if yes, attach a screenshot of the error message.
if not, check you install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

HT204053 My company has recently issued company ipads. I currently have a iMac for personal use in which I have a iTunes account. Is there a way to down load all the music I have on my iMac iTunes account to my iPod as well?

My Company has recently issued company ipads. I currently havea iMac for personal use in which I have an iTunes account. Is there a way to down load all the music I have on my iMac itunes account to my iPod as well? Also will I be notified on email when I have a response to my questions? Thanks for your response!

Connect the iPad to your iTunes account.

I got an ipod recently and i bought songs and apps already but i cant even get free things now without it asking for my billing details which i have already put in and i know for sure that i still have money on it

I got an ipod recently and i bought songs and apps already but i cant even get free things now without it asking for my billing details which i have already put in and i know for sure that i still have money on it

You need a valid payment method even for free items. If you know the payment method is valid then contact iTunes.
Apple - Support - iTunes - Contact Us

If SIRI works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question

if SIRI application works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question. my iphone 4 are already update for iOS 5. I'm searching in the internet forum some are saying that it's only work if your iphone are jelbreak, and the problem is i don't want my iphone to be jelbreak. thanks for reading my question. and please send the question on my email many thanks....
<Email Edited by Host>

What else is there? There's Siri, A5 chip, 8MP camera, intelligent switching between antennas. Those are the only new things in the 4S. Like I said, if Siri was on the 4, fewer would buy the 4S. Second, the 4 is discontinued to make room for the 4S, so there will be no updates exclusively for the 4. Third, I never trust any reports on the Internet unless it comes directly from the company (in this case, Apple).

Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I g

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I get clarification on the $29.99 offer and who it is available for. Thank you

Hi there
The 29.99 introductory offer is for existing CS customers ie customers with a CS3-CS6 product (suite or individual product).
Hope this clarifies matters.
Thanks
Bev

The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.

The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts. I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone. I tried turning contacts for both off and on and rebooting, but it didn't help. Any ideas?

Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting. You would need to check with your employer's IT department to confirm this. You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.

Options for modeling massterdata attributes which can have multiple values

Similar Messages

Maybe you are looking for