Options for Passcode screen?

Just upgraded to ios7, and am hoping that I can change how the Passcode screen works. I LIKED the audio feedback (the click) that I used to get when I typed in a Passcode -- it is now gone, and I don't see a setting to restore it. I LIKED the "character count" that displayed at the top, showing HOW MANY of my passcode numbers I had typed in, and I don't see that now (though I DO see THAT in some screen shots of the passcode screen).
Are there SETTINGS for the Passcode screen, that I've not yet found, that might restore these options for me?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Similar Messages

How to put Mandatory option for selection screen fields in ABAP Queries

Hi Experts
Can anyone tell me how to put mandatory option for the selection screen fields in ABAP Queries.
Manually I had written code in the At Selection Screen option in infoset to display error message if that field is blank.
But I need to display the selection fields with the tick mark (obligatory mark).
How to do this?
Appropriate answers will be awarded

Hi
For parameter option
parameters : p_kunnr type kna1-kunnr obligatory.
For select option
select-options: s_date for vbak-erdat obligatory.
Plz rewards points ,
Regards ,
Ganesh.

How to create a Bool Option for Full Screen and Page Item in Mucow?

Hi Guys!
I was looking to create a bool option in Mucow widget options which toggles between Full Screen and a Normal Page Item .
Example: Qooqee's Google Map Widget
Need some help.
Thanks in Advance

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

Options for full screen images

Hello!
I'm new. So far really like Muse. I'm creating a website where the single image fills the screen. Realizing different people have different resolution screens. How is the best way to create a layout in Muse (widget) Which would allow the image file to scalle to fit what ever size the browser is?
So far I placed an image in the master gage, and depending on browser, it is to large or not centered. (1920x1080)
I want to try the new TOOLTIP Slideshow idea. Will that scale?
Thanks
Alex
PS would this have to do with pining my png elements?

With nothing selected click on "Browser Fill" in the Control Strip. Then click on the folder icon in the panel that drops down and select your image. Choose the Scale to Fill option and I think you'll have the effect you're looking for.
Note you'll want to resize the image before importing. Muse doesn't currently resize a browser fill background image. I recommend an image that's no more than 2048 in either dimension, and 1920 is probably better. I'd also choose the "Low" JPEG quality setting in Photoshop's Save for Web feature. That should equate to an image that's 100k, or less.
There are a lot of "how to" videos and tutorials at muse.adobe.com that you'll probably find helpful. Muse is similar to InDesign and Illustrator in many ways, but some of the nuances of working with web content are different (I.e. Background images/image fills).

Way to change the top bar options for main screen?

I can't explain this very well but you know the main screen (the main menu) of Apple TV with Movies, TV Shows, Internet, Computers, Settings...Is there a way to change the default options that appear just above that? Like right now if I click over to Internett it shows me what I think are the movies in "Recommened for me" for Netflix. It would be awesome if I could get that bar to show my recently watched, so it would be super fast to get to my most recently watched movies and tv shows. Or like when I scroll over to Computer I could see the albums I listen to most often.
Thanks for your time.

no there is no way to change what is displayed.

Live Media option for Magnifier / Screen Reader Makes No Difference

Based on the GRUB menu that appears from the Live DVD and/or USB, two options are:
Oracle Solaris 11/11 With Magnifier
Oracle Solaris 11/11 With Screen Reader
While these options are associated with different (-B assistive_tech) kernel commands in the GRUB menu, they appear to make no difference in the Live version of Solaris that is booted. All three have access to Orca in GNOME for both functions.
So why do these options even exist, and what are they supposed to do?

The difference should be what's enabled in the desktop session; without those options we don't automatically turn on the screen reader or magnifier in the session that's started, though obviously you can run them once you're into the desktop. There's also some extra audible prompting in the initial keyboard and language selection screens.

HT5957 iOS 7.0.2 How do I change to Greek keyboard option for passcode entry

How does one change the passcode entry keyboard option?

You may not want to do this as my iPhone is now disabled, as are a number of others. There appears to be a problem unlocking the device once a complex password is enabled.

List option for home screen instead of icon

On the Curve 8330, is it possible to set up a listing by name only of the applications instead of the icons on the home screen?

Check the below links -
BBGEEKS
Blackberrythemes.co.uk
Bplay
Just give a search in google...and you'll find tons of these.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Why when I go to a site where they play videos it starts playing on its own and the pic. quality is bad and no option for full screen

help with this please can't I just use my default player

fullscreen option is in flash-player that your webpage download from server. you cannot change that, you can only enable or disable flash entirely on your side.

HT1620 How do you acces the Greek keyboard option for passcode entry?

This is toted as an additional feature of the 7.0.2 update. Is this Greek keyboard a simple (i.e. 4 character) passcode? How do you set it up?

Within iOS, "passcodes" are four-digit numerics. "Passwords" are alphanumeric strings.
Select the passcode or password prompt with the Settings > General > Passcode Lock > Simple Passcode setting.
I have the English and Spanish keyboards selected in Settings > General > Keyboards, and have access to both keyboards at the password prompt.
The passcode prompt is always numeric, and thus displays a numeric keyboard.

No options for advanced tools in iMovie 10.0.3

When i go into preferences to turn on the advanced tools in imovie, i only get a slow motion, and a option for icloud loading. Any
idea whats wrong? i have looked online for answers, but have found nothing. Does this version not have the the option for Green
screen, side by side, etc.?

The "advanced setting" option no longer exists in iMovie 10.0.0. Everything is already either in a tab or layed out in front of you.
In order to access most of your editing functions such as green screen and side by side, you may find them under the option located close to the top right hand corner of iMovie called "Adjust" which will put down a drop down menu of edits that my be done.
For further information be sure to check out my personally video tutorial on this: https://www.youtube.com/watch?v=SkLpsYkDvIU

Itunes says i must enter passcode on iphone but iphone only gives option for emergency calls

My sim card is inserted and when I turn the iphone on it only gives the option for emergncy calls, when i connect to itunes it says the phone is locked and i need to enter the passcode on the phone but i cannot enter pass cose on phone as it doesnt give me the option.
Any ideas?
Thanks

You're gonna have to force the phone into recovery mode:
Turn your phone off. If you cannot turn off your phone using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

I have forgotten my passcode for the locked screen on my iphone6 and have already restored the phone as new. It is still asking for passcode...what do I do now?

I've forgotten passcode for screen on iphone6. I have also restored the phone as new. It is still asking for passcode. What can I do now that I have not bee given a chance to set a new passcode?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

TS2634 ipad screen lock and ask for passcode

my ipad screen lock and ask for passcode, which i don't remember. my kid change the passcode. Aslo, it talks for passcode 4 values require.
Is there any reslove for this issue?? Thank you.

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

Options for Passcode screen?

Similar Messages

Maybe you are looking for