Options for pre-recorded voice paging
What options are there for pre-recorded voice paging on Cisco Phone Systems.
We are running Cisco Unity Express 3.1 on a Cisco 2851 and I have a ATA186 that connects to a PA System that has an extension assigned to it.
So what I would like to do is select between 2 or three pre-recorded messages and play it over that extension.
I know Informacast will do it but that is a little expensive in my opinion for what I want to do.
Take a look at SynApps SA-Announce and Broadcast Manager: http://syn-apps.com
Both are great products, compatible with CME, and are typically cheaper than other options.
Similar Messages
-
What format for a recorded voice media should I use for iMovie . Should it be a Mp3
What format does Imovie except for a recorded voice media. I making a movie and I wantto use my sisters voice. She will record her voice and send it to me. I have a audio converter. Should I convert what ever she sends to a mp3. What works best with Imovie 11 ?
Hi
In all my Video works in iMovie HD6 or iMovie'08 to 11 or FinalCut Express 4 or FinalCut Express Pro 6
I ONLY use
• .aiff - 16-bit 48kHz or 16-bit 44.1 kHz (from Audio-CDs)
or if audio is in iTunes I then I collect needed sounds into a new PlayList - Then I burn this as a Standard Audio-CD (NO .mp3)
So - for me - no .mp3, .vma or other strange formats - all converted to .aiff
So I convert all 32 kHz audio to 48 kHz (else my audio goes out of sync.
By keeping this I get near to Zero problem with my Audio in all my projecs.
Yours Bengt W -
How Do I Add A Pre-recorded Voice Over to an iMovie Project?
I have an audio file with the voice over I want to add to my movie project (which has an insturmental music track I want to duck during the voice over). How can I add this pre-recorded voice over track to my project?
You can drag in the voiceover file and drop it on top of the clip where you want it to start. It does not have to be perfectly placed, because you can fine tune it later by dragging.
I would suggest putting your voiceover file in iTunes and dragging in from the music browser, but it also works to drag in from the Finder. If you drag in from the Finder, you must take care not to move it later, or the iMovie Project will not be able to find it. -
Caller ability to toggle option for Compliance Recording on UCCX
Can one can configure UCCX and Compliance Recording to provide the option to the caller to turn off Recording for their particular call? I had the thought to present the caller with the option in the initial prompt and move the caller to another queue which isn't being recording by CR. Anyone done this before?
Thanks.Hi
AQM supports IPC actions - that should mean that the easiest way to get this running would be:
1) In the script, allow caller to elect to be not-recorded
2) Based on that, set a extended call variable in CAD to mark it for non-recording
3) In CAD, execute a voice workflow that (based on the extended var being set to 'no-record' or whatever) sends an IPC action to delete the recording to AQM.
Details of integrating CAD to QM in this way are here: http://www.cisco.com/en/US/products/ps8293/products_programming_reference_guides_list.html
Regards
Aaron -
-k option for pre-compile?
Hello -
WLS 6.1 SP2, Solaris 2.8
Is it possible to do the equivalent of "jspc -k" (continue to compile jsps
after one fails) when using the "precompile" option of WLS? I can't find
one in the console.
Thanks,
Ross
Hi,
This is a known issue and it should be included in the next Service Pack for
WLS 6.1.
Stay tuned!
Romuald RICHARD
Developer Relations Engineer
BEA Support
"Ross Johnson" <[email protected]> wrote in message
news:[email protected]..
> Hello -
>
> WLS 6.1 SP2, Solaris 2.8
>
> Is it possible to do the equivalent of "jspc -k" (continue to compile jsps
> after one fails) when using the "precompile" option of WLS? I can't find
> one in the console.
>
> Thanks,
>
> Ross
-
Seek option for Live Recording Video?
High defenition video is getting recorded using Flash application and Flash Media server, there is another flash application to view the recording Stream (Live View).
I wonder, is it possible to seek a particular position using the seek function in the viewer application ?
i mean, is it possible to seek to a particular position when playing a live recording video ?
Any input on this will really help me a lot.
Thanks & Regards
Devendran. Iyou can seek based on time so if the time sought has already been recorded, the seek should work.
-
To record voice with a few second pre roll time
When I record my voice, I want to hear pre-recorded voice a few second just like voice over tool in FCP.
Has Soundtrack pro the fuction?No there isn't preroll.
-
External microphone for recording voice memos on iPhone?
I have a video iPod and a plug in microphone to record voice memos. It's high quality and I love it. Is there one for the iPhone?
Not that I am aware of.
-
Hey all,
Please could someone explain what all the different options for recording BDC in SHDB are. In specific I'm interested in knowing what the CATT mode (No CATT, CATT with individual screen control & CATT without individual screen control) and the Simulate Background Mode options do.
Thank you
Tim.hi,
Check this link
http://www.sap-img.com/sap-catt.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pf
Usually from what I have seen CATT is not used for regular transactions in the productive environment. I have only seen LSMW used for the transfer of data from non-SAP systems to SAP systems. It guides you thru your data migration tasks.
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e21017408e11d1896b0000e8322d00/content.htm
- SAP advise not to use CATT in productive systems.
http://www.planetsap.com/basis1.htm
- Start of CATT processes allowed: This option determines whether you want to allow the CATT (Computer Aided Test Tool) process in the client or not. Computer Aided Test Tool (CATT) is tool provided by SAP to test different functionality of the SAP system. To run the CATT tool you can execute transaction SCAT. CATT process changes the database extensively and requires lot of system resources. So we recommend not to chose this option if you are in the production environment.
There has also been some comments on LSMW on this forum:
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3D37272%26tstart%3D135
- The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
My 2 cent would be why not develop a solution using Batch Input, BAPI etc?
Check these links
http://help.sap.com/saphelp_nw04/helpdata/en/48/c521a8f6ec11d2bdde080009b4534c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/410b37233f7c6fe10000009b38f936/frameset.htm
http://www.thespot4sap.com/Articles/CATT.asp
http://www.sap-img.com/sap-catt.htm
it is one of the option for call transaction
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d7/e21481408e11d1896b0000e8322d00/frameset.htm
http://www.sd-solutions.com/documents/SDS_CATT.html
Please check this online documents.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf -
Missing "Add Records" and "Refresh Records" options for data sets post domain re-import
We recently had to re-install the Endeca server and as part of which had to export and re-import the data domains. Everything went fine except for the fact that newly re-imported data sets showcase just the "Manage Attributes" and the "Delete Data Set" options for an administrator login in. The previously available options to "Add Records" and "Refresh Records" beyond manage attributes/Delete Data Set are missing.
Thoughts? Is there a security setting to enable these?So are you talking about the Add Records and Reload Records options for a data set in Studio?
There are no separate security settings for these options. If a user is an application administrator (is able to edit the application), then they should have access to these options.
The options are only available for data domains created using the Provisioning Service (created by uploading a file or from the JDBC or BI Server data source from the Data Source Library).
I don't know if the process of exporting and re-importing the data domains (not sure how you did that) could somehow cause the data sets to no longer know that they were created by the Provisioning Service, in which case those options would not be enabled. -
Options for Displaying Reference Attribute in AdvancedTable Record
Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank youIf UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly. -
Hi all gurus!
When we go to SHDB, we have 4 options to set - Default Window, Don't end recording after commit, simulate background mode and "No BDC mode".
I guess I am aware of the meaning of No bdc mode -> which probably means that SY-BINPT will be SPACE if I set it to X.
No end of BDC after commit is also obvious that it will not end BDC after COMMIT. But when should we set it while recording?
What is SIMULATE background mode? Does it mean SY-BATCH is set to 'X"? When we run BDC in session mode, is Sy-batch set to 'X'? Should we set this parameter or not? This is not clear.
Also, in what scenarios should we check Default window?
My understanding is that it should not matter how we set the parameters while recording. Important thing is we should code in similar manner. So whatever was set while recording, same should be set while coding in CTUPARAMS. Is it correct?
Thanks in adv !Check the following thread
Recording Options for SHDB -
WAV Multichannel recording format option for Live-2
I'm running Creative MediaSource Player/Organizer 5.0.38 and Creative CD Burner Plugin 5.0.3 for my Li've! 24-bit external sound card, but I'm not getting the "WAV Multi-channel" option in the recording format menu. I loaded the software from the CD that came with the sound card, I reloaded it (three times!) from the creative.com downloads page, and nothing I've tried gets that "WAV, Multi-channel" option to pop up. I have recording source set on "What U Hear", CMSS is enabled, as per the tutorial at http://us.creative.com/support/kb/ar...p?l=3&sid=4428 but the only recording format options I've got are WMA Mono, WMA Stereo, WAV Mono and WAV Stereo. Has anyone encountered this problem and figured out a solution? I sure would appreciate any help. Thanks.
Windows XP, Compaq nc6000 laptop?2 tracks for guitar and one track for my vocals on the One.
You have two mono inputs, one each on two different interfaces. So no, on 3 tracks.
To use your 2 interfaces simultaneously with the configured I/O, you would need to create an Aggregate Device. To get a 2 Channel device. And have 2 USB connections available.
http://www.apple.com/pro/techniques/aggregateaudio/
However, it's possible they may not work together or work well as an Aggregate Device.
But easy enough to try. -
IPhone 5 Pre-order but no option for AppleCare?
Hi,
I don't know if this is the right place to ask this, sorry if I'm wrong!
I've pre-ordered my iPhone 5 from my carrier (Orange UK) but there was no option for AppleCare. Am I able to purchase this from the Apple Store once it has arrived?
Thanks, BenYes, once you get the phone take it to an Apple Retail Store or call AppleCare in your country for your options.
-
Hi,
I have an Audigy sound card on a Dell desktop and it has the "What You Hear" recording option within Vista. I need the same option for my Dell Notebook, unfortuntately, this notebook uses a Sigmatel card within the motherboard. What device or application to i need to buy in order to get the "What you Hear" recording option to be available?
What am i attempting to do?I often record li've webcasts in which the video portion comes through a Li've Meeting or Lotus Same time application using a Screen Recording Application?BUT the Audio comes from a conference which i use a VoIP software to dial into. I need to be able to record the sound that's been generated through my computer as an internal source. I need to be able to select 'What You Hear' as the default recording device so that the screen recording application i use can also record the audio been played through the PC?Appreciate any help here. Thanks?KevinIf it'sis not a Creative card, "what u hear" will be called something different. Maybe "stereo mix" or something else. The device just records anything coming from the soundcard. Play around and see if you don't have something similar to "what u hear" with a different name.
Maybe you are looking for
-
My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggest
-
DVCPRO HD and Quicktime 7.4
Hello, I have a Quicktime file encoded with DVCPRO HD codec. I tried to view it with Quicktime but it could only play the audio but couldn't show the video. I don't have FCP installed on this machine. Does it mean I can't watch any file with DVCPRO H
-
I've just installed the wireless router with speed booster and it's working great. Can my laptop access the printer that's connected to the desktop pc? Desktop pc of course is hard wired to the router. Would the printer have to be hard wired into
-
Dear Experts, I'm trying to cancel an invoice document via t/code MR8M. I entered inv. document no., fiscal year 2009 & reversal reason as 02. System not allow to cancel this document error below: Allowed posting periods: 02 2010 / 01 2010 / 12 2009
-
Data source Delta problem very urgent
We are in Media Company and just implemented SAP BI and the datsource used by us is 0ME_ISM_AM_ORDER_1. The process is when a order is booked . there is a version created and if the order is modified "n" number of times, then "n" number of versions a