Options greyed out in the main Garage Band toolbar tab

I hadn't noticed that earlier but when I clicked it I saw this!!! (look at the pic)
I have had a serious issue with Garage Band recently: it opens with a considerable delay (up to several minutes) and isn't showing up in Mission Control regardless of how many other apps are opened at the same moment. I have earlier version of GarageBand and these options look normal. When troubleshooting some other issues (not this one!) I trashed some plists as recommended in an Apple Support article on iLife troubleshooting.
Help me, please: what should I do to fix this and return the ability to use these options?

But why it even wasn't possible to view the version? I thought it was a must-have option that should work any time.
That is because GarageBand is showing a dialog panel and waiting for a selection. The main application window is not active but the "New Project" panel. Then most of the options in the "garageBand menu are inactive", until the panel has been dismissed.
I am seeing this (in English, sorry): The GarageBand application menu is inactive:
In the main window, once the project has been created, all is active again:
That is very typical for all dialog panels in most applications. as long as a dialog is active, the main application menu is aimed for most options, for example in iPhoto:
But you can easily find the version number of an application, by looking at it in the Finder in column view:
Or use "File > Get Info" on he application.

Similar Messages

Hierarchy Variable creation - OK option greyed out at the last step

Hi Folks,
Last year we have upgraded to BW 7.31.
i was trying to create a hierarchy variable for one of the char info objects to select user choice hierachy at the variable prompt.
At Final step of the, I was not able to select the OK to complete my devlopment and use the hierarchy.
Please find the screen shot attached . am i required to creata version variables also .
regards
Virat

Hi Virat,
Please apply SAP GUI for Windows 7.30 with latest Patch Level and
BI 7.0 ADDON FOR SAP GUI 7.30 with latest Patch Level and check
whether it helps you.
Also, please refer the following SAP Note:
147519 - Maintenance strategy / deadlines for SAP GUI
Also, can you please enter the value for Hierarchy Version (present under Select Hierarchy Version)
seen in the screenshot which you attached here and check whether it helps you.
Thanks & Regards,
Sapna

Why is my WIFI option greyed out!? 4S

Last week I had my iPhone 4S replaced because my wifi option greyed out and the battery life started to drain really fast. 8 days later it's the exact same problem. What's happening here? I bought the phone 11 months ago!!! Up to date software, reset network settings. I have spoke with several other people with the same problem. I expected more from an expensive apple product...
Please help me Apple! Thanks

Your replacement should have a minimum of a 90 day warranty, if replaced by Apple.
If you've followed all of the steps in the troubleshooting article, and your replacement device is still having wi-fi greyed out, then get the device replaced.

TS1398 My Wifi has completely gone, the option on the slider is greyed out, and the slider won't slide. Tried all the fixes on the forums, (except the fridge/frezzer method), none work. Grrrrr!

My Wifi has completely gone, the option on the slider is greyed out, and the slider won't slide. Tried all the fixes on the forums, (except the fridge/frezzer method), none work. Grrrrr! This has been an issue since installing new IOS! How long will it take apple to come up with a fix. My carrier offered me an early upgarde at a massively inflated monthly cost (how kind of them!).

My Wifi has completely gone, the option on the slider is greyed out, and the slider won't slide. Tried all the fixes on the forums, (except the fridge/frezzer method), none work. Grrrrr! This has been an issue since installing new IOS! How long will it take apple to come up with a fix. My carrier offered me an early upgarde at a massively inflated monthly cost (how kind of them!).

IPhoto won't open, gives me an error message and the icon is greyed out on the dock

My iPhoto icon is greyed out on the dock and wont open. When I click on it it says it may be damaged or incomplete. Went to All Images and the photos are still in there. Went to aplications and the iphoto icon looks normal. Clicked on it and got the following error message. "You can't open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?" There is a quit button with the message, but nothing to allow me to create a new photo library. So neither my wife nor myself have tried to upgrade iphoto. Not sure how it got a newer version. It was working fine a few weeks ago. Anybody have any ideas how to fix or restore the icon and iPhoto without losing pictures?

Hmm.
Rather than assume the account is "kinda" damaged, I would instead work on the basis that something in the account is damaged, and - as iPhoto is working correctly in the other account - that something is specific to this account.
So: Check on things that are specific to the account:
The Libraru
The plist files
The Cache files
are obvious approaches.
In the case you describe an awful lot of the time the issue is with the Library. This simple test will tell you if it is:
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If you can make a new Library and get it to work, then the issue has to be with the old library.
In that case:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Select option greyed out for fields of custom DataSource (rso2, rsa6)

Hi
Why are several fields, in my custom DataSource (created in rso2) not available for select?
I do not think this is a permission issue, since several fields are selectable, but not all fields.
It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
Is this safe?
IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
(I can test this).
What I most need to know is If this suggestion is safe, or if it has side effects?
Thank you

Hi Eileen,
In Least case to enable the selection for the fields with the below program:
Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
SE38: Create a program for ref below code.
REPORT ZNP_SELE_DS.
tables: ROOSFIELD.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BELNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
Thanks & Regards,
Srinu.Rapolu

My internal hard drive wont show on the desktop and is greyed out in the finder

My Internal drive will not show up on the desktop, and appears greyed out in the finder.
it shows up fine in disk utility and i have tried to repair permissions. This runs normally, there does not seem to be any problems with the drive itself.
if i unhide the hidden system folders using terminal, it appears on my desktop again, but greyed out.
any ideas how i can fix this?

Try deleting the Finder .plists. You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences. Move the .plist(s) to your desktop.
Relaunch Finder and test. If it works okay, delete the plist(s) from the desktop.
If the Finder is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

IPhone 4S: the Wi-fi is greyed out and the Bluetooth seems unable to initialize.

Several weeks ago, I got a replacement iPhone 4S due to an unrelated issue. Approximately six days after receiving it, I had the wi-fi start sporadically working (it could not stay connected to the wireless network). Within three hours of that, the wi-fi stopped working entirely. The wi-fi toggle was greyed out in the Settings app and I could not activate it. The bluetooth seemed to be unable to get going, either, although I at least saw a spinning "working" symbol instead of gray out. I tried the guidance provided in from the Apple Support site, including restoring, resetting, etc.
A week later (approximately four days ago), I went to an Apple store with the issue. They replaced the phone with another iPhone 4S. The wi-fi seemed to work. However, two days later (Monday, November 25), I observed that the wi-fi was no longer working. It was greyed out. The bluetooth seemed not to work either. I tried resetting it, clearing the network settings, and what not. It did not work it.
Today, I went to the Apple store at lunch time. After some standard troubleshooting, they got a new, replacement phone out for me. When that phone was set up (as a new phone), it wasn't able to connect to the Apple store's wireless. Once it was set up, we observed that the wi-fi was greyed out and could not be activated. The Apple store employee plugged it into a nearby laptop and did a factory reset. When that was done, the wi-fi seemed to work.
I got home roughly an hour ago. I have done little with the phone other than browse a few websites. As I was attempting to download some of the apps I no longer had (as I was *advised* not to restore from my old iPhone backup), the wi-fi disconnected. I went to investigate and it could no longer find any wireless networks. I tried to toggle the wi-fi. Once it was in the off position, it would not return to the on position.
I just completed a factory reset of the phone. As of right now (within 20 minutes of the restore), the wi-fi is still connected and functioning.
I'm already prepared to return to the Apple Store within the next four days because I'm expecting to the wi-fi to fail, again. Luckily, I got the extended AppleCare plan, but if I have to either return my phone to the Apple Store or do factory resets every day, this is not the phone I want.
Has anybody else had similar experiences? Is there an official justification for this, outside of "rumors" of iOS issues? Do I have a Sim Card problem? Or is this just a subtle suggestion from Apple that it's time to get a Windows phone?

Hi Holliecollie93,
It sounds very frustrating that you are unable to use wifi with your iPhone. I do have an article that I would like you to use in order to troubleshoot this, though it sounds as if you have already done some of the steps provided -
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Specifically -
Resolution
Follow these steps to resolve the issue:
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options.
Thanks for using Apple Support Communities.
Best,
Brett L

When OpenGL stopped working (option greyed out)

I discovered a weird bug in Photoshop 12.1 x64 with nVidia graphic cards and what´s causing it:
Problem (on all off my PCs): OpenGL support in prefs / performance is greyed out, no shadow below open documents visible ( == OpenGL not working). After deleting prefs.psp and restarting (as the www says), OpenGL support was working again, on next restart: no support - option greyed out again.
Solution: if deleting the prefs file or the whole prefs folder don´t work, check if you have a custom workspace with the brush floating panel open.
If so, close it and remvoe it from workspace, restart PS and.... OpenGL support is working again!
I could reproduce this bug on all of my PCs, no matter what type of GFXcard and driver version is installed.
Maybe that bug occurs only with Win7 x64, PS 12.1 x64 and nVidia cards, but removing the brush panel solved it on every machine!!
I´ve opened a support ticket and provided Adobe with screenshots of the working and not-working states... maybe they can fix this with an update!
This are my system specs for the tested machines:
workstation 1:
Intel i7 980X HexaCore (with SMT)
ASUSP6T7 WS Supercomputer
6 x 4GB DDR3 triple channel
nVidia Quadro CX
3x WD SATAII HDDs
dual monitor
Wacom Intuos4 XL
3Dconnexion SpaceExplorer
contour Shuttle Pro2
workstation 2:
Intel i7 975 Extreme Quadcore (with SMT)
ASUS P6T Deluxe V2
6 x 2 GB DDR3 triple channel
nVidia GTX 580
2x WD SATA HDD
both systems running on:
Windows 7 x64
Mastercollection CS5.5
latest updates for OS, CS5.5 and GFX drivers...
Maybe this threat helps .... ;-)

I did heavy testing the last days including systems at my home and at a friends office.
In fact, I can´t tell, what´s causing this, but it seems to depent on a certain type of installation. But first the tested systems:
nVidia GTX480 SLI, Win 7 x64, CS5.5 - working
nVidia GTX580 Win7, CS5 - working
ATI HD4870x2, Win7 x64, CS5 - working
nVidia GTX580, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
nVidia GT240M, Win7 x64, CS5.5 - working
ATI X1900XT - XP SP3 x64, CS5 - working
nVidia QuadroCX, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
ATI HD4390, XP x64 SP3, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
nVidia GTX480, Win 7 x64, CS5.5 - working
On each system I installed the latest driver & updates, rebooted it and followed the same procedure:
1 - removed (==renamed) prefs folder
2 - start PS
3 - open prefs / performace
4 - config OpenGL for "Advanced"
5 - closing prefs and restarting PS
6 - checking OpenGL when active: pt7
7 - Open menu "Window" and and select "Brush" (or press F5)
8 - docking Brush-panel from original position to the tools-panel on the left
9 - saving workspace as "BrushTest"
10 - restarting PS
11 checking OpenGL
Since you have all older Versions still installed when you update i.e from CS4 to CS5 I tried this with every installed version.
On my two office WS I have CS4, 5 and 5.5.
After trying this with the GTX580 with this results: CS4 working, CS5 working, CS5.5 not working - I today started PS 12.1 for working and saw that tiny shadow below the document - WITH the brush panel open!!
Checked it and now its working proper. I have no clue what has changed over night but it did it...
My primary WS with the Quadro card still refuses to actived OpenGL with the opend brush-panel, no matter what I try.... maybe I gonna deinstall that CS4 to 5.5 mess and get me another license for the full CS5.5 instead of the update from the update...

Trying to restore ipod from one that died. But restore from backup is greyed out in the itunes menu.

I have latest version of itunes on Mavericks, a brand new ipod nano, and I am trying to restore my old dead ipod from its last backup onto the new ipod. The previous (dead) ipod was inherited from my daughter and is called "Kim's ipod" and I didn't get the option to initialise with the same name when I first connected it to itunes. I suspect that might be the problem.
Restoring from backup is greyed out in the file menu.
This strikes me as a situation that shouldn't be too uncommon - I'm wondering what I am missing.
- How to restore a new ipod from the backup of a new one
- Why is the restore from backup option greyed out
- Or, how to reinitialise the ipod so that the new one can have the same name as the old one in order to back it up.
Or anything else that I might have missed. FYIY the new ipod is NOT in recovery mode.

Hmm. I came to realise iTune Match had downgraded 38 of my tracks, which I'd ripped from my own CDs long ago, with 256kbps versions. I do have backup for the tracks, so I'd like to delete these 38 tracks (I've made a Smart playlist of them), deleting them from iCloud too; then with Match turned off, recover my originals (Add to Library) from an old Mac.
Can't do it! As Richard Tench said at the top, from 27 July 2011, Edit > Delete is permanently grayed out if you have opted for iT Match. And for me on iTunes 10.6.3 (Lion 10.7.4), that's not all: Edit > Cut and Cmd-x both just produce the Bonk sound. My Macbook keyboard has no Del key either.
But all the above are only true with Match active. Store > Turn Off iTunes Match will ungrey Edit > Delete (& fn-bksp etc I imagine). So I would then be able to delete the tracks locally. But of course, if you turn off iT Match you can delete all you like locally, but they will still exist in iCloud, and if I turn on iT Match again, the lower-grade 256kbps ones will come down from the clouds to replace my CD-ripped ones again! Won't they?
Is that right? Is there any way to exclude these 38 tracks (out of ~6500) from iTunes Match so I can keep my better quality CD-ripped ones? (Other than using Alt-Launch & creating a separate iTunes fileset for the 38 tracks - as you might have guessed, some of them fall right in the middle of albums.) Help!
dw32

No Sound; All options greyed out

Output options for sound are greyed in Preferences and the desktop sound icon. In the Audio MIDI Setup window, the default output says Built-in Output and the System Output also says Built-in Output. No other options available for either.
Just below halfway down there is Audio Input, which has a bunch of info on the left, but on the right where it says Audio Output, there is just a greyed out message that says Output is Not Supported.
I also tried the option/apple/p/r, got the three chimes, but sound is still greyed out.
Any gurus out there who can tell me what simple thing I did to cause this, or is it a hardware/sofware bug?
Macbook Pro Core Duo 2 Mac OS X (10.4.8) 2 gig SDRAM 2.33 GHZ Core Duo 2

it doesn't matter if you've used the ports or not.. there is a sensor inside the audio ports that will automatically switch your audio in and/or out into digital mode if it trips and then 'thinks' there's a digital cable connected. basically, if you open your sound control panel and display the output pane and it says 'digital out', and the volume control (and everything else) is greyed out, and it says something about this device not having volume control... then this is exactly the situation where the port sensor has clicked on to digital and is staying there. unfortunately, the sensor seems to be quite fragile and there are plenty of users that are suddenly wondering why they have no sound, and why the sound ouput only says digital and the options are greyed out. it would be at least a comfort to be able to say that this only can happen if you've been plugging things into the port (such as headphones), but I've heard of this happening to people regardless.
anyway, look for the signs I mentioned: the digital output option being the only available choice in the sound control panel, with options greyed out. and also a red light coming out of the port. if this is happening to you, then you need to get the machine fixed cos that sensor is jammed.

Open iTunes option greyed out - why?

Hello - I am wondering why, when connecting my ipad to my mac, it opens up in iPhoto, and why the open iTunes option is greyed out on the summary page. Any ways to change this? Thanks!

You can do this while the iPad is connected to the Mac.
Launch iTunes on the Mac and from the menu at the top go to iTunes>Preferences>Devices and see if the box at the bottom - prevent iPods, iPhones .... from syncing automatically is checked. If it is checked - uncheck it. Then go to the Summary Tab and you should be able to check - Open iTunes when this iPad is connected.
I think this may be something that you can try as well. Go to System Preferences on your Mac and click on Accounts. Open your user account - you will need the administrator password - go to Login Items and make sure that iTunes Helper is checked.
For the iPhoto issue - launch iPhoto and from the menu - iPhotos>Preferences>General>Connecting Camera Opens no application.

How to create new playlist. File option greyed out

The create playlist option is greyed out in the File menu. How do I create I new playlist? What is wrong with the new version?

Hi;
How to create new alertlog file. Does it require the DB bounce?Oracle will automatically create a new alert log file whenever the old one is deleted and you dont need to bounce db
For details see:
http://orafaq.com/wiki/Alert.log
Regard
Helios

Acrobat X Pro Form Edit option greyed out

Acrobat X Professional running on Win7 32bit.
We are converting a word document into PDF with Acrobat, however after the file is converted the option to Edit Form is greyed out.
The same word document can be converted on other PCs with Adobe X Pro, where the Form Editing tools are available to use.

Do you see other Editing options like Distribute Forms, create etc? Are they all greyed out?
If that is the case- Look for Form (AcroForm.api) under Help->Adobe Acrobat Plug-ins. Is that available?
Check the conversion settings under Preferences-> Convert to PDF-> Select MS word from the list. Look if there is any security set.
SaVe.

Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD

Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD.
I am trying to find out what GPO setting is causing this so I can change I.E. settings at a desktop running Windows 7.
A GPO has I.E. locked down so settings are greyed out for Intranet settings so I can't change Intranet settings.
How do I enable so I can save changes with a GPO?

Classic GPO using Administrative Templates, is designed to do exactly that (disable the UI).
Previously, you could use IEM in preference mode.
Now, you'll need to use GPP, but there are a couple of limitations.
Check the IE10 IEAK documentation (it's useful for understanding what you can do with GPP)
http://technet.microsoft.com/en-us/library/jj890998.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Options greyed out in the main Garage Band toolbar tab

Similar Messages

Maybe you are looking for