Options pane selection using key board.

http://i228.photobucket.com/albums/ee151/cosmac2007/iLife.png
Can somebody please let me know how i can select the cancel option using only keyboard? I've been using Mac OS from an year but still have to figure out this one. In Windows, a simple tab key press would do that. Please check the image to see what i am talking about. i dont know how to describe the options pane.
Did Apple overlook this keyboard shortcut or did i live without knowing this for more than a year? It is not present in leopard too.

This dialog box doesn't come with pre highlighted option. So we have to click with a mouse to open the application.
[IMG]/___sbsstatic___/migration-images/573/5734399-1.png[/IMG]
<center>
</center>

Similar Messages

Scrolling of dinamani site in firefox using key board not properly configured?

scrolling of dinamani site in firefox using key board not properly configured?
by using down arrow i am unable to scroll
instead it goes to end of page
previously ie. about 4-5 months back this problem was not there

You may have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

I am not getting any sound on my iPad while using key board or in any games

I am not getting any sound while using key board , in games have tried all the option as suggested by other members like rotation / mute switch setting , resetting the iPad etc . Any other way to solve this issue

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I am trying to copy and paste a work document into my online class. POP up states that Cut, Copy, and Paste are disabled by my Modzilla broser and that I could use key board short cuts or visit the website.

'''bold text'''Want to copy & paste word doc onto my online class discussion post. Unable to. I either need directions on how to use key board short cuts. I have visited the Modzilla web site like it also stated but am unable to find an answer to this.

See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

HT3529 how i use key board

How i use key board specially typing of upper case letter

Press the shift key (looks like an up arrow). Then press the letter you wish to type in upper case.

How to use Key Board Key In oracle forms to perform a specific task

Hello Experts, I am new In Oracle forms.I am using weblogic server 10.3.5 with oracle forms 11g at windows 7.I have a procedure(say check) under program unit.I have a data block.Now I have need to access Check procedure when I press The 'Ctrl+C'(control +'C' key board key). I have to set this functionality for a single form(module) not for all modules.Please suggest me how to do this by using pl/sql in oracle forms if possible. thank You regards aaditya.

Hi,
Its a documentary question, please google for hotkey mapping in forms.
I hope this is helpful to you Enabling Key Mappings

WHY DOESNT KEY BOARD EXPRESS WORK ANY MORE WITH FIREFOX?? I HOST TOURS AND NOW IT DOESNT WORK AT ALL I HAVE TO USE CROME FOR THEM TO WORK

I USE KEY BOARD EXPRESS TO RUN TOURS FOR A GIN LEAGUE I BELONG TO. AS A HOST FOR GIN GAMES I USE THIS TO RUN MY RULES ECT FOR THE GAMES I AM SETTING. ALL WORKED WELL UNTIL LAST WEEK I CANT USE THEM BECAUSE THEY DONT WORK. IN ORDER FOR THEM TO WORK I HAVE TO USE CROME. WHY DOESNT MY MICROS WORK ANYMORE ???

First, just a note that writing in all caps is considered shouting. Please don't shout at the volunteers.
Can you give me an example of one or two of the macros that aren't working?
Does Firefox not respond at all, or is the wrong thing happening in Firefox?
Does Keyboard Express run purely externally (just sends hotkeys to Firefox) or does it have an add-on? You can check to make sure any add-ons are enabled on the Add-ons page. Here's how:
Open the Add-ons page using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
(1) In the left column, click Plugins.
If anything here is related to Keyboard Express, trying change it from "Ask to Activate" to "Always Activate". This might not take full effect until the next time you exit and start Firefox up again.
(2) In the left column, click Extensions.
If an extension is disabled, it appears at the end of the list on a gray background. If you find one related to Keyboard Express, you can use the Enable button to re-enable it. If Firefox will not allow that, you may need to update the extension.

POP UP window or screen to enter badge id ( it should work like Key board)

Hi ,
We have requirement that client have touchscreen user interface desktops in plant where production process goes on.
I am developing a dynpro program for PP operations. This program will be used in touch screen devices. Before the operators starts his work , he has to enter his Badge ID (Numbers only). (Note : They don't use Key board for these devices)for that i need to create a pop up window as F4 help. I am looking whether SAP already has any kind of pop-up window which can solve my problem. Please let me know whether any key board screen/window available?..
Thanks in advance.
-Siva

Try :
*fields-tabname   = 'TRVOR'. " table name
*fields-fieldname = 'SUMSO'. "field name which the user might enter..
*APPEND fields.
*CALL FUNCTION 'POPUP_GET_VALUES'
* EXPORTING
*   no_value_check        = 'X'
*    popup_title           = 'Jay'
**   START_COLUMN          = '5'
**   START_ROW             = '5'
* IMPORTING
*   returncode            = l_returncode
* TABLES
*    fields                = fields
* EXCEPTIONS
*   error_in_fields       = 1
*   OTHERS                = 2 .
*CALL FUNCTION 'COPO_POPUP_TO_DISPLAY_TEXTLIST'
* EXPORTING
*    task       = 'DECIDE'
*    titel      = 'TEST POPUP '
* IMPORTING
*    function   = sy-ucomm
* TABLES
*    text_table = it_data.
[ Check this nice WIKI by Sandra|http://wiki.sdn.sap.com/wiki/x/bIChBg]
Edited by: J@Y on Oct 5, 2009 9:48 PM

Key board shortcuts in BPM Presentation

Does any body is having any idea or template or any demo project; how to use key board short cuts like "Save->Ctrl+s for save button" in BPM Presentations.
Thanks,
Brijesh Kumar Singh.

In that case you need to log your Feature Request at Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
This link will take you to information about some free macro recorders.
http://www.techsupportalert.com/best-free-hotkey-macro-recorder-utility.htm
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

My key board is stuck in the fuction setting only while in fire fox. i can`t use the question mark i only get this É

My baby must of hit a combination of keys while no one was looking and i don`t have use of some of my keys any more it`s like my function setting on the key board is stuck on. It only does it while in firefox though my keyboard works normally otherwise

In addition to the above:
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
See:
* http://support.microsoft.com/kb/306993 - HOW TO: Use the Language Bar in Windows XP
The default keys to rotate the layout is a combination (Ctrl+Shift or Alt+Shift) that can easily be used in Firefox to activate a menu item.<br />
To avoid an unintentional switch, assign a specific key sequence (Alt/Ctrl+Shift+number) to select keyboard layouts and remove the key combination to rotate layouts (Alt+Shift or Ctrl+Shift)
* Control Panel > Regional and Language Options > Keyboards and Languages > Change keyboards > Advanced key settings > Change key sequence
*http://support.microsoft.com/kb/258824 - How to change your keyboard layout

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problem with table-indexes when using select-options in select

Hello experts,
is it right that table-indexes will not be used if you take select-options to select data from the database?
in detail:
i have build up an table-index for one of our db-tables and test it via an test-programm. The first test with '=' comparisons worked fine. Every key of the index was used; checked via ST05!
e.g.:    SELECT * FROM TABLEA INTO ITAB WHERE keya = '1' AND keyb = '2' AND keyc = '3'.
Now i startet the test with select-options
e.g.:   SELECT * FROM TABLEA INTO ITAB WHERE keya IN seltabA AND keyb IN seltabB AND keyc IN seltabC.
First of all i just filled the seltabs with only 1 value:    eg: seltabA=      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'     etc.
Everything worked fine. Every key of the index was used.
But now, I putted more than one entries in the seltabs e.g.
seltabA:      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '2'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '3'
From now on, the indexed was not used completely (with all keys).
Isn't that strange? How can i use select-options or sel-ranges with using the complete table-indexes?
Thanks a lot,
Marcel

Hi Hermann,
i hope this helps:
this is the first one, which uses the complete index:
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" = ? AND "ORGID" = ? AND "KOART_BASIS" = ? AND
"STATUS" = ? AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR "STATUS" = ? OR
"STATUS" = ? ) WITH UR
RESULT: 5 IXSCAN /dbcon/01_con05 #key columns: 4
And the second one, which does not use the complete index! The 3 ranges are filled each with 2 values. Remember; when i fill them each with only one value, the result is the same as you can see above(/dbcon/01_con05 #key columns: 4):
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" IN ( ? , ? ) AND "ORGID" IN ( ? , ? ) AND
"KOART_BASIS" IN ( ? , ? ) AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR
"STATUS" = ? OR "STATUS" = ? ) WITH UR
and here the access-plan
   0 SELECT STATEMENT ( Estimated Costs = 5,139E+01 [timerons] )
5     1 RETURN
5     2 NLJOIN
5     3 [O] TBSCAN
5     4 SORT
5 TBSCAN GENROW
5     6 <i> FETCH /dbcon/01_con
7 IXSCAN /dbcon/01_con05 #key columns: 2
As you can see, only 2 keys were taken for indexed selection!
Any idea?
Kind regards,
MArcel
Edited by: Marcel Ebert on Jul 28, 2009 5:25 PM

Dell 1950 power-edge III gen, key board and mouse stop after reboot using F1 key--Red hat 6.0

I am trying to install OS (Red hat 6.0) in Dell 1950 power-edge III gen, After booting CD i got option to hit F1 to install or let is continue to start the installation process. now screen goes to next step and key board and mouse stop working . it stop me from further step. Please help
Sam

Try booting to our live image and see if that lets you use the mouse and keyboard. http://linux.dell.com/files/openmanage-contributions/omsa-71-live/

Menu Creation and Using the SELECT soft key

Hi,
I am trying to design a menu similar to the thumbnail menus available in most phone these days.what i want is a set of icons placed in a tabular format ie rows and colums. the joystick control can be used to navigate thru the icons and using the select soft key ie the middle button of the soft keys, the next set of forms can be displayed.
so far, i have created a form, used a few image item and used the Item's layout directive to arrange the imageItem as i want on the display. I can get the joystick to navigate between the imageItems however the select button doesnt fire any event.
I have added a command to each of the items and set an ItemCommandListener.
That approach seems to be working fine but it defeats my purpose. the reason being i had problems with the mapping of the command keys. For each display i had an option of going to the main menu and to the next screen. On the emulator it maps perfectly with the left key having the main menu and the right key having the "next form" button. But while implementing on the phone, the left key has the main menu but the right key shows "more options", when u click more options you get the "next form" button. This is happening in every form on display and makes it more tideous to use.
Thats why i was hoping to get the select button working if possible. Any help would be much appreciated.

Try searching J2mepolish.org plenty of work is done
with Regards
Rizwan

Assigned F key to play an action does not work. Why? Using cs6 iMac and wireless key board

Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6 iMac and wireless key board.
Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

*** Moderator Action ***
This networking question has been moved from the Solaris 10 discussion space,
to the Solaris Networking discussion space, for closer topic alignment.
Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

Options pane selection using key board.

Similar Messages

Maybe you are looking for