Options Screen - Need your assistance.

Hello,
When you click on "Options" in the menu section, are you able to see "General Options"? I want to change the default volume for calls but the instructions for the 8900 Curve is telling me to do the following:
1. In the phone application press Menu key.
2. CLick Options
3. General Options (Which I don't see)
4. Default Call Volume field
5. Press Menu Key
6. Click Save
IS there a different route to take? Or do I have a software problem.
Also, can I change my ringtone or alert tone for my text messages? If so, how do can I do that.
Thanks for your help!
Solved!
Go to Solution.

The Profiles are the volume settings for your phone. So you can change the profile settings to Loud, Normal, Vibrate, etc. You can either go to your profile settings from the main screen or the Application Menu screen.
From the Main Screen scroll up to go to your Profiles
In your Profiles, scroll all the way down and select Advanced
In the Advanced settings, you can edit each profile. Scroll to the profile you'd like to edit, such as Normal. Hit the menu key, and select Edit.
You will then be taken to a list of all the applications that requires a ringtone. You can edit the tone, volume, etc for each one.
To edit the ringtone for your voice calls, select Phone. When done editing, hit menu to save your changes.
To edit the ringtone for your text messages, select SMS Text. When done editing, hit menu to save your changes.
Please Kudos me if that helped and mark as resolved if I did so
Message Edited by mizmellyjelly on 01-11-2009 11:50 PM
..miz melly jelly.. - click to follow on Twitter!
Don't forget to Kudos me

Similar Messages

Need your assistance in mapping Structure and Field in DME Tree

Hello Friends - I need your help in "Mapping from structure field" in DME.
In the existing format tree, It is mapped Structure as "FPAYP" and Field name "BNAME" to populate Company Code name in the Payment file.
Now I am asked to change this to populate value either from OX02 or OX15.
When Company Code name was maintained, It was maintained in short and in the address tab, Full name is maintained.
Please let me know which Structue and Field I should assign to pull the value either from OX02 or OX15.
Thanks for your help.

Thanks a lot Henri/Lakshmi.
I have maintained mapping procedure Sturecture/field - FPAYHX/AUST1 to get the CoCd name in the file. In AUST1, Length of the CoCd is more than 18, and as per Bank format, It should be 18 characters in length.
User is not happy that complete CoCd name is not populated in the file. He has come up with an alternative and shortened the CoCd name that needs to be populated in the file and suggested us to get the value into the payment file. We should not replace CoCd name with the name he suggested in OX02/OX15,FBZP.
My doubt is that if there is any filed I can use to maintain the name he suggested and assign it in mapping procedure.
Thanks

I need your assistance? Verizon won't port old phone number over to my new FIOS

Need your help on resolving this issue with Verizon.  I switched from COX cable. Had Verizon FIOS triple play installed at my house about 3 days ago. I signed up online for Verizon FIOS and selected a new telephone number because I was told online that my old number cannot be ported over to new FIOS.
Earlier today, I was contacting my friends for a new phone number and learned from them that it is violation of FCC regulation that the Verizon FIOS could not port my old number. They said that the Verizon should be able to port my old number... In my realization, I contacted Verizon customer service, but the rep said that the Verizon FIOS cannot do it because the installation is completed.
I wanted to keep my old telephone number that I had years originally with Verizon and then Cox.
Any ideas on how to get or make Verizon port over my old telephone number to my Verizon FIOS? Again, I was told by a Verizon rep or online during the sign up process that it can't be done and/or they won't do it.

Need your help on resolving this issue with Verizon.  I switched from COX cable. Had Verizon FIOS triple play installed at my house about 3 days ago. I signed up online for Verizon FIOS and selected a new telephone number because I was told online that my old number cannot be ported over to new FIOS.
Earlier today, I was contacting my friends for a new phone number and learned from them that it is violation of FCC regulation that the Verizon FIOS could not port my old number. They said that the Verizon should be able to port my old number... In my realization, I contacted Verizon customer service, but the rep said that the Verizon FIOS cannot do it because the installation is completed.
I wanted to keep my old telephone number that I had years originally with Verizon and then Cox.
Any ideas on how to get or make Verizon port over my old telephone number to my Verizon FIOS? Again, I was told by a Verizon rep or online during the sign up process that it can't be done and/or they won't do it.

HT201320 Dear all, while i was trying to dowload an application i received an error "your apple id has been disabled" . I need your assistance

Dear all, while i was trying to dowload an application i received an error "your apple id has been disabled" . I need your assistance

You will need to contact Apple support: http://www.apple.com/support/itunes/contact/

Please, I need your assistance...

Please, I have an ipad 4 cellular wireless. I downloaded some songs with a browser and a downloader. I want to move it to iTunes so that I will be able to always play it from there, but I seem not to be able to do it. Any assistance on that from anybody. Thank you.

Depending upon what app that you downloaded them with then you might be able to copy them from that to your computer's iTunes via the file sharing section : http://support.apple.com/kb/ht4094
If they are in a compatible format you can then add them to your computer's iTunes library via File > Add To Library and you can then sync them to the Music app on your iPad - syncing, and downloading from the iTunes store app directly on your iPad, are the only ways to get music into the Music app.

Purchased QNAP 469-Pro NAS, need your assistance upgrading my home network components

Hi everyone,
First of all, I apologize if I am posting my question in a wrong sub-forum. Having said that, I've recently purchased a QNAP 469-Pro NAS -- http://www.qnap.com/en/index.php?lang=en&sn=822&c=351&sc=513&t=520&n=9786 -- that has dual gigabit lan ports. The unit also supports link aggregation ( otherwise known as port trunking or IEEE 802.3ad). Currently I have a WRT 610N wireless router and a TP-Link 8 port gigabit switch that does NOT support link aggregation. Now, I would very much appreciate it, if you helped me by teaching me how to best upgrade my network components so as to fully utilize the performance (or come close as much as possible to the advertised performance) of 221.8 MB/sec Reading, 220.8 MB/sec Writing mentioned on QNAP's website. I have all of my files (movies, music, personal data files, etc) stored on the NAS. I get roughly an abysmal ~38Mbs right now. My household uses the NAS constantly to stream from and download to the NAS. Any help would be greatly appreciated. Many thanks in advance....
P.S.. There are two MB Pros (2010 Core I7, 8GB ram) and two iPads (2) that are most of the time connected to the networking either watching something or browsing the web.
Amir

What if I use SLM2008 for the switch? Then all i need is a wireless router that gives me a perfomance closer to the rates I have mentioned in my original post ( actual throughput, not advertised rates).

It me agian i need your assistance.

well i tried to build a Active X for OUTLOOK 2000 and 97 and i seem
not to have success. what i'm trying to do is have a MAX and MIN Limit on
data capture VI and then if the project goes out of specification alarm then
goto to a email or pager capability of course when i activate the OUTLOOK
this will call my modem then send the numeric page???? please help anyone...
i'm at the final of my project i seem to be stuck at this section.
i use LV 5.0.1 with the G code.

Hi mark,
If, once you follow Steve's instructions, you find that the App says "Downloaded" next to it instead of the cloud, go back into your Apps tab (not in the store, but the one for your computer in iTunes), and drag the offending app into the trash - delete it from iTunes when the question comes up.
At that point, you should quit iTunes, then reopen it, and follow Steve's instructions again. This time you should see the cloud...proceed with Steve's instructions.
Cheers,
GB

Attn: deathstalker i need your assistance

i checked the athlon recommended motherboards a while back for the 2200xp's. the board meets qualification according to amd (then), but it used to say for bios 2.6. now after not able to boot up at all with the 2200 i replaced my 1600 in there and did a look back. it says that bios 2.7 is what is needed. i was wondering if it is possible to be sent a beta bios? i will comply with certain agreements if need be. please, give me a reply to my msn account [email protected] this way i can give you my preferred address for easier transfer and communication. tia
note bios 2.6 max mult is 12.5 needed is 13.5.

thanks i did when i got in from work, but no go at all. diag lights all red and no post. i checked the bios multipliers before i did it anyway and it only went up to 12.5. anyone have any knowledge as to why they say bios 2.7 is needed and i have it but it is not capable to run that multiplier?
thanks again

I need your assistance,can you please help?

Hello to all,
To make a long story short, I had installed the software "Net Nanny" but had to take it off as it was creating too many problems.Anyhow, I think something happened with an Adobe _____??
When I RIGHT click on my desk top or on some of my folders I get the following message:
Explorer EXE Fatal Application Exit
"The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.01\Version Cue DLL."
I reinstalled by Adobe 9.0 Professional but I keep getting this message and it's horrible. For example, I cannot right click to do a "scan disk" because this message pops-up.
Thank you for any assistance!

Sounds like the problem mentioned in.
http://kb2.adobe.com/cps/408/kb408524.html
This is probably unrelated to Acrobat but related to Creative suite. Please try the Version Cue forum:
http://forums.adobe.com/community/creativesuites/version_cue_windows?view=discussions

How to do Query optimization?It takes more time to fetch the record from db. Very urgent, I need your assistance

Hi all
I want to fetch just twenty thousands records from table. My query take more time to fetch twenty thousands records. I post my working query, Could you correct the query for me. thanks in advance.
Query
select
b.Concatenated_account Account,
b.Account_description description,
SUM(case when(Bl.ACTUAL_FLAG='B') then
((NVL(Bl.PERIOD_NET_DR, 0)- NVL(Bl.PERIOD_NET_CR, 0)) + (NVL(Bl.PROJECT_TO_DATE_DR, 0)- NVL(Bl.PROJECT_TO_DATE_CR, 0)))end) "Budget_2011"
from
gl_balances Bl,
gl_code_combinations GCC,
psb_ws_line_balances_i b ,
gl_budget_versions bv,
gl_budgets_v gv
where
b.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and bl.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and
bl.budget_version_id =bv.BUDGET_VERSION_ID and gv.budget_version_id= bv.budget_version_id
and gv.latest_opened_year in (select latest_opened_year-3 from gl_budgets_v where latest_opened_year=:BUDGET_YEAR )
group by b.Concatenated_account ,b.Account_description

Hi,
If this question is related to SQL then please post in SQL forum.
Otherwise provide more information how this sql is being used and do you want to tune the SQL or the way it fetches the information from DB and display in OAF.
Regards,
Sandeep M.

Need your Assistance..pl do the needful.

Hi Experts,
I am a Newbie to OWB,
There is a scheduled process flow which is running every day morning and it is an incremental load ( I mean the target of that process flow is an incremental type).
so below are the few points which i would like to know about the below points.
1) How can i know that how many records got inserted on each particular day (*as it is an incremental type*).
2) What is the load start and end time of the particular processflow (*i want to see the start and end time in a back end table for the month*)
3) How can i know on which particular day load has been failed.
please help me on this as many of my questions are related on the above points.
Any help is greatly appreciable.
Many Thanks..
Pavan Kumar

Using Oracle SR Team Help

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.

Hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours there is nothing just a waiting icon in the middle of the screen and none of home or turn off button are response so i do need your help plz

hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours waiting (as known it takes a 1 to 2 minutes maximum) there is nothing just a blank screen and a running waiting icon in the middle of the screen and none of home or turn off button are responsed so i do need your help plz & thanks in advance..

Try to reset it by holding the power an home buttons at the same time until you see the Apple logo, then release. If it won't reset, you'll probably have to force it into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller.

ATT: Skyee Need your urgent Assist

Dear Skyee
Need your urgent Assist ASAP, i need to know if there were problems (like arabic language gone after belle update) ?
also my product code on My C7 is 059B7V7 but the one on the nokia availability Site is 059b7v6 is what should i do Please Answer Me ASAP?

I just replied to you here: /t5/Software-Updates/Nokia-Belle-Custom-Version-amp-Custom-Version-Date-Problem/td-p/1301317

Options Screen - Need your assistance.

Similar Messages

Maybe you are looking for