Options to move your tool bars above the tabs? And options to shade tabs and buttons with different colors?

In this version my tool bars are below my tabs, I like my tabs directly above my page. And in this version the tabs are almost see through which is fine except it would be cool if we had an option to change the color of them you could still keep them almost see through but let us add a tint of color to them, as well as add color to the other buttons in the browser bar.

Thank you, I appreciate your answer. I did however figure that one out myself actually immediately after I asked the question. But you are correct.

Similar Messages

  • When I open my Yahoo mail account, it comes up with lines between every entry. When I try to send a new message, the dialogue box is incomplete. The tool bar above the message box is empty so I cannot change the font or font size, etc.

    This problem does not occur when I open my Yahoo mail account in Internet Explorer.
    Because of it, I cannot use Firefox to access my Yahoo mail.

    See:
    * http://kb.mozillazine.org/Website_colors_are_wrong
    * http://kb.mozillazine.org/Websites_look_wrong
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • How do I change the size of the words on the banner and tool bars?  The words are so large that I cannot access all the options.

    How do I change the size of the words on the banner and tool bars?  The words are so large that I cannot access all the options.

    Hi ewhuntley,
    It sounds like you may be running Acrobat 11.0.07, is that correct? If so, please choose Edit > Preferences > General. In the entry Scale for Screen Resolution, choose 100%. Save your changes, and restart Acrobat. Did that do the trick?
    Best,
    Sara

  • How to I get my Mac to show the iPhoto tool bar across the top?

    My iPhoto doesn't show a tool bar across the top--just the categories on the side.  Therefore, I can follow Gary's instructions on deleting photos.  I didn't realize until I watched a video that I didn't have the options he was talking about.

    Are you using Full Screen View? Or a second Monitor? Try move your cursor to the very top of the screen.

  • After downloading the latest version of Firefox I am unable to display more than one website at a time in the tool bar at the top of my screen.

    Before I upgrades to your latest version I was able to display many websites at the same time in the tool bar at the top of my screen. Now I can only display one at a time and it is extremely annoying.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • How can I make disappear the finder tool bar in the second monitor?

    How can I make disappear the finder tool bar in the second monitor?
    (I have to use ProVideoPlayer, a professional application for presenting videos and I really need a clean second monitor!)

    After changing that setting and logging out and back in as it indicated, do you still have two menu bars?
    If you are already set up that way and want to move the menu bar to the other monitor, drag it there in the Arrangement tab of the Displays system pref.

  • How do I get the tool bar on the very bottom of my monitor to return there .

    How do I get the tool bar or the box at the very bottom of my monitor to return there . Now for some reason it is on the right hand side of my monitor. This box has the start up button and the time and date on it plus others.

    Hi,
    Hope the following article helps:
        http://www.wikihow.com/Change-the-Position-of-the-Taskbar-in-Windows-7
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have a HP Pavilion which has a touch sound bar above the keyboard. The display is no longer there

    HP Pavilion Entertainment PC  Windows 7
    Wich has a touch sound bar above the keyboard and a display shows on the bottom of the screen when I touch the bar.
    This display is not there any longer.
    This question was solved.
    View Solution.

    Hi,
    Download and install the HP OSD utility on the link below.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
    After the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Just updated from iOS 6 to 8, I find the tool bar in the iBooks too wide as it blocks the running title of my books. Anyone experienced this? Any solution?

    Just updated from iOS 6 to 8, I find the tool bar in the iBooks too wide as it blocks the running title of my books. Anyone experienced this? Any solution?

    In the last few days, it seems that my computer has all of a sudden caught a virus.
    As others have pointed out, this isn't malware. That should not be your first (or even fifty-first) thought when your Mac starts misbehaving. For more on this topic, see my Mac Malware Guide.
    I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
    You mention "cleaning and maintenance." Have you been running utilities claiming to do those things? If so, you may be the victim of an overly-zealous cleaning job, which has removed important files and damaged your system.
    If I'm understanding correctly, you're unable to open any applications at all... is that right? Do you have any backups? If you don't have backups, you're in a sticky situation, as it will be difficult to make backups in your current state, but you shouldn't try any kind of repairs without them. (Actually, you shouldn't do anything with your computer without backups, but this is especially important when something is going badly wrong.)
    If you have backups, reboot from your Snow Leopard install disc. From there, first, repair the hard drive with Disk Utility. Once that is done, assuming repairs were successful, reinstall the system. You can simply reinstall it on top of your current system, and it will replace any damaged or lost system files with new copies. (You'll also need to update the system via Software Update after reinstalling.)
    If you don't have backups, or if Disk Utility can't repair damage, or if the problem continues even after a reinstall, post back with those details.

  • When I maximize my screen on my Mac it hides the menu bar and the typed tool bar at the top of the screen - how do i fix this

    When I maximize the screen on my Mac Book Pro it hides the menu bar and the typed tool bar at the top of the screen as well.  How do I undo this?

    10.7 "Full Screen" is a feature imported from IOS, the land of tiny screens.
    To use a larger window on a REAL computer, adjust the Window's size to suit your needs. Do not use "Full Screen".

  • Can we place a Tool Bar at the Bottom of the List GUIBB ?

    Hi All,
    I have a requirement to place buttons, Link-to-Action's at the bottom of the ListUIBB.
    By default we will get the Tool Bar at the Top of the List, but in my requirement few actions are at the bottom.
    Is it possible to place Tool Buttons at the Bottom of the LIST ?
    Thanks in Adv.
    Thanks,
    Kranthi 

    Hi All,
    I have a requirement to place buttons, Link-to-Action's at the bottom of the ListUIBB.
    By default we will get the Tool Bar at the Top of the List, but in my requirement few actions are at the bottom.
    Is it possible to place Tool Buttons at the Bottom of the LIST ?
    Thanks in Adv.
    Thanks,
    Kranthi 

  • Add bottons on the application tool bar of the standard selection screen

    Hi All,
    I am having the standard selection screen in module pool programing. I wnat to add the bottons on the application tool bar of the standard selection screen.and hide the existing bottons (like std. execute and i bottons.)instead of these i want to give my won bottons like create and display.
    pls help on this.

    Hi Sridhar,
      Try the Code below. It places two buttons on the selection-screen along with the execute button.
    TABLES sscrfields.
    PARAMETERS: p_carrid TYPE s_carr_id,
                p_cityfr TYPE s_from_cit.
    SELECTION-SCREEN: FUNCTION KEY 1,
                      FUNCTION KEY 2.
    INITIALIZATION.
      sscrfields-functxt_01 = 'LH'.
      sscrfields-functxt_02 = 'UA'.
    AT SELECTION-SCREEN.
      CASE sscrfields-ucomm.
          WHEN'FC01'.
          p_carrid = 'LH'.
          p_cityfr = 'Frankfurt'.
        WHEN 'FC02'.
          p_carrid = 'UA'.
          p_cityfr = 'Chicago'.
      ENDCASE.
    START-OF-SELECTION.
      WRITE / 'START-OF-SELECTION'.
    Just go to the table sscrfields to knoe the fields in it. I think this clears the issue.
    Regards,
    Swapna.

  • I have no "File - Edit - History - Bookmarks tool bar at the top of my screen and can't figure out how to get it!

    new desktop, new user of Windows 7. Made Firefox my browser as always, with Yahoo as my home page. There is no tool bar at the top of my screen that says "File - Edit -- History __ etc the way I have always had! I can't figure out how to get this, and I need it! Help!!

    Press the alt key next to the spacebar. Do you see it now? If so, click View -> Toolbars" and check the Menu bar. See [[Menu bar is missing]] for more information.

  • How to add custom buttons in the tool bar of the crystal reports viewer

    Hi,
    I'm using Crystal report viewer (Crystal 2008) in my report and I want to add custom buttons and handle them in the tool bar of the viewer. Is there anyway to achieve this?
    Please help me in this regard.
    Thanks in advance.
    Siva.

    I did this by adding a picturebox to the toolbar, the same size as the buttons, and loading in an image, and putting code into the Click event of the picturebox.
    I also put code into the MouseHover event to change the picture's background color and into the MouseLeave event to change it back.
    I have a couple of these buttons. They work very nicely and really look like part of the toolbar.

  • TS4083 I lost the tool bar on the bottom my 4s I phone, and now I cannot delete emails

    I lost the ability to delete emails on my 4s I phone the tool bar at the bottom is missing

    This happened to me as well, the mail toolbar disappeared. I had an Exchange mail account that seemed to cause the problem. I went into the General settings under the Mail, Contacts, and Calendars; turned all the setttings under the Exchange account from 'ON' to 'OFF', which fixed it. Then I went back in and re-activated the Exchange account. It fixed the issue for me. Good luck!

Maybe you are looking for

  • How to tell N6.5 DHCP to use a W2k8 for PXE?

    Hello, could anyone give me a hint, how to tell my netware DHCP to use a Windows Server 2008 R2 running Acronis with PXE Server? Actual Situation: Netware 6.5 Sp8 Server with ZENWORKS in Cluster mode Netware DHCP Server ZEN7 SP1 Imaging --> works fin

  • Acrobat Pro 10.1.10 always freezes in OS X Mavericks 10.9.4

    Double-clicking a PDF in the Finder launches Acrobat Pro, but functionality is limited. Turning a page freezes it. Performing a Find freezes. Performing a Force Quit shows it is Not Responding. I can re-launch it, but not open a PDF. This is part of

  • How to process an email with signature and attachments

    Hi, I need to process emails which have been signed with a pkcs7-signature (smime.p7s) and have one XML-attachment. Everything works fine if an eMail has no signature, but only the attachment. How do you get rid of the email-signature with XI? Any he

  • Snap all rows in table/document

    I've been working through the book  "Scripting InDesign with JavaScript." The script is originally for snapping columns, but I'm trying to snap all the rows in tables so I've changed the references to "rows." I've worked through to this point, but it

  • Consignment return showing on billing due list

    Hello, We are having an issue where a very old sales order/delivery is showing up on our billing-due list.  This was a consignment return for zero dollars so there are no credits or billing involved.  How do we remove this from the billing due list?