Optiplex 745 motherboard replacement

looking for proper info to order replacement dell optiplex 745 motherboard. what numbers should I look for?
Thanks Guys!!!

You're very welcome!
Thank you for your acknowledgement of my service to our country. It was an honor to serve.
I would have been very happy to help if I had known the answer to your question.
I help anyone I can with drivers from different brand PC's, but I don't have any info on part #'s, etc.
In other words, I am not a HP "snob."
Happy Holidays to you too!

Similar Messages

Installation of Solaris 10 on Dell Optiplex 745

Hi,
I am new to Solaris. I am planning to install Solaris 10 10/08 on my Dell Optiplex 745 with the following config,
Processor: Intel Core 2 Duo 6300 @ 1.86 GHz
No if Bits: 64 Bits
RAM: 2 GB
HDD: 160GB
Monitor: Dell 17" Plug and Play
I would like to know if i can install Solaris 10 on this machine. If i am likely to face some problems, can you please detail the same.
Thanks,
Ashwin
Edited by: AshwinMKumar on Mar 26, 2009 12:58 AM

In the future, don't post a question to multiple forums.
[http://forums.sun.com/thread.jspa?threadID=5376263|http://forums.sun.com/thread.jspa?threadID=5376263]
(your answer in in your other post)

My '08 17" macbook pro motherboard replacement has issues

my mac had its motherboard replaced by the recall a couple years back and since i got it back it has been restarting on it's own, if have too much pressure on the keyboard or if the surface under (table) isn't perfectly level.
ONce it restarts - it won't stop until it's level and been powered off and on several times.
I had been living with this problem for the past 2 years as of this february (I believe) until it stopped for 24hrs 3 weeks ago and I was forced to buy again.
My buddy told me it could be because apple hired a 3rd party company to handle the replacements of the recalled motherboards and they neglected to tape a cable that causes the power surge to restart my mac or that they didn't solder the connection.
How can i fix this issue?

Sorry, let me clarify.
Yes, it was the Nvidia GeForce 8600M GT recall
It works, but suffers from restarts when moved from one location to another and must be restarted over and over until the power from the surge stops.
I want to figure out how to fix myself (I do alot of iphone repairs and can handle small fixes) or if needed through apple or a 3rd party.
I need it fixed completely, because I'm sending this to my computer illiterate mother.

Problem with restoring an Image to Dell Optiplex 745

Hello,
i try to restore my image to my new Dell Optiplex 745 machines. I am
using ZFD4.01IR7 with the boot-cd from zenimaging.info which uses the
zfd7 imaging engine. I am able to restore the image but unfortunately my
local (and only...) Administrator is not in the Administrators group
anmyore. The Group membership shows only an SID, perhaps the old
Administrators SID... So i cannot install drivers for the included NIC
in order to use DLU for logging in with an Administrator from edir.
I know that that is an unsupported environment with the mixed versions
of ZfD but it works for other machines.
Any help would be appreciated.
Kind regards,
Thomas

On Mon, 26 Feb 2007 15:58:20 GMT, Thomas Degenhardt wrote:
> The Group membership shows only an SID, perhaps the old
> Administrators SID... So i cannot install drivers for the included NIC
> in order to use DLU for logging in with an Administrator from edir.
hmm.. bring down the image manually, remove the just imaged flag with
zisedit from ZISD, start windows and check if that helps
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Lenovo B560 motherboard replacement

Hi,
My dear laptop died on me about a month ago. It wouldn't do anything when pressing the power button and the power led would not light when connected to power. Tried with or without the battery, no led, no power. I checked with another cable and I checked my cable on another laptop and it worked so the issue has nothing to do with the power cable.
I took the laptop to my universities repair shop for a diagnosis and they said the Motherboard is dead.
Any suggestion where I could find a brand new motherboard replacement in the UK?
Thanks,
sorband
Solved!
Go to Solution.

Hi Sorband,
unfortunately nothing found in UK, but please have a look at this eBay sales...
http://www.ebay.co.uk/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0&_nkw=Lenovo+B560+motherboard&_...
may use Google search...
https://www.google.com/#newwindow=1&q=buy+Lenovo+B560+motherboard
Good Luck... Zehn

Qosmio F10 won't recover after motherboard replacement

Hi,
I'm having a problem with recovery on my Qosmio F10. It won't boot from the CD, I get a message 'media test failure check cable'.
I tried everything I could find here about this problem with no result. Then I read somewhere on this forum that recovery cd wouldn't work if the laptop has been serviced and has a new motherboard. This is excatly the case.
I had a new motherboard and CD/DVD drive put some time ago.
How do I make it work again?
A.

> Then I read somewhere on this forum that recovery cd wouldn't work if the laptop has been serviced and has a new motherboard. This is exactly the case.
Who has replaced the motherboard? The ASP?
Well, usually the Recovery CD should works after the motherboard replacement.
I presume the parts were replaced with exactly the same parts and therefore there shouldnt be a conflict between the Recovery CD and the new motherboard.
Did you try to boot from another bootable CDs like Win XP or Linux? Check this!

1st Generation 2 Gbyte Motherboard Replacement for Model No.A1137 needed, please...

1st Generation 2 Gbyte Motherboard Replacement for Model No.A1137 needed, please...

Quote from: vernonion on 27-August-08, 09:51:53
Everything is not working fine, and a pop with sparks is not a normal result from turning on a power supply. If you got it from Tiger send it back and get this one.
I talked to the rep earlier, but I had to go to a meeting. When I called him back he said he was on the phone with Intel to make sure my CPU would work with that board. I know it will work so I have no clue why he called them. He didn't seem to concerned about the PSU though. I told him that the PSU popped and made sparks and it didn't phase him at all. I already told him I wanted to exchange the RAM with different kind and I wanted a new PSU. When I give him the new RAM and the PSU I want I will give this one a try.
Thank you for your help.

R61I Motherboard Replacement

Afte rmany years my R61I 8918CTO 08/03 has given up the ghost due to the infamous
Nvidia Quadro NVS 140M.. GARBLED DISPLAY PROBLEM that Lenovo and Nvidia know about and of course refuses to fix now.
I have the 15.4" wide screen with 1900 max resolution, 1394 firewire, bluray writer and T9300 chip so it was a very expensive nice laptop that still does everything I want. I have taken very good care of it over the years and it is in excellent condition. Right now it is brick due to the GPU chip. Now my question is what is the Motherboard number without me taking it apart to get it before I have a replacement board and what motherboards replace it? AFter research I see if I can get the same motherboard after 08/08 it should be good. Or is there another motherboard with a better GPU chip I can use? I know this is an old laptop but it will cost over $1000 to get the same thing now just slightly faster with more memory I do not need so I would like to fix this one.
I have found what I believe is in the laptop either 42W7791 or 42W7882 both with the Nvidia chip. I cannot find a replacement with the Intel chip.
Thanks!

Welcome to the forum!
thermostat wrote:
After research I see if I can get the same motherboard after 08/08 it should be good.
Post 08/08 boards are rare. You can contact forum member TuuS, he may be of help finding you a proper board.
thermostat wrote:
Or is there another motherboard with a better GPU chip I can use?
There's the possibility of fitting a T61p planar (Nvidia Quadro FX570M) in your R61i case, but the frame needs modifications and there are other disadvantages. Source (german only): http://thinkwiki.de/R61i#T61-Board_im_R61-Geh.C3.A4use
Regarding the Intel boards, you can try to get one of the following FRU numbers listed below, there might be more, I got those from the hardware maintenance manual (you can download it from here: click me!)
42W7825
42W7883
42W7826
42W7884
42W7827
42W7885
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

HP G5056EA motherboard replacement

Hi Guys,
I'm replacing my motherboard as its dead, no sign of life when power cable is plugged in, it shows that charger is plugged in by illuminating power sign on the led screen where hdd light, power on lights are.
so assuming need a new motherboard. I've bought new one now struggling to open the laptop to get it out. I have removed
every possible visible screws from the back but it seems like one or two screws are holding it up from the middle of the laptop which It seems like they're screwed from below the keyboard.
I would apprecaite if someone can show me how to get this motherboard out, I'd really appreciate it.
Thanks in advance.

I don't think I will ever receive reply from HP tech support as I have rang them and they were unable to help me.
So far I have bought 18 laptops for my business and guess what all of them had one or the other issue. 2 of them needed motherboard replacing within 2 months,
Based on my experience with HP products and especially HP tech Support, I would never recommend anyone to buy any HP product from now on.
WORST CUSTOMER SERVICE EXPERIENCE with HP.

Hi i bought a macbook pro 8 and half mounths ago. Today i had the hard drive replaced as it was faulty and on Monday i have to take it back to the Apple shop to have the Motherboard replaced. I feel that i should be asking for a new macbook, where do i st

Hi i bought a Macbook Pro 8 & a half mounths ago.Today i had the hard drive replaced as it was faulty and on Monday i have to take it back to the Apple shop to have the Motherboard replaced. I feel that i should be asking for a new macbook, where do i stand.

Yes thats what i thought but i only have 77 days left on my garentee so its a worry, and have to drive 1 hour to get to closest Apple shop, spent the whole day there today when i should have been at work and have to make the drive again on Monday Then back again next Friday to pick it up. I paid over £1000 ponds for this computer so wouldnt expect it to have its insides replaced befor a year. Feel very let down, and no longer love my macbook pro.

Where can I get a motherboard replacement for a Pavilion dv6-3020us laptop?

Where can I get a motherboard replacement for a Pavilion dv6-3020us laptop?

Have you tried to clean vents with compressed air.
Some other propositions below:
Check the link below:
How to prevent and deal with overheating.
Try to solve problem with audio by using intrcutions form the link below:
Use Hard Reset to Resolve Hardware and Software Issues
Note:
Do this for 1 minute instead 15 seconds.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Thinkpad T400 Motherboard Replacement Advice

I accidentally dropped my T400 into water(Fell from a table into a water container). The service technician who checked it told me that motherboard's not working and has to be replaced. Now I am not sure whether to invest in the motherboard or buy a new one(I had a core 2 duo P8700 which is a decent processor and these days you get and i3's and i5's from $600).
Couple of things here is
1) T series right now would be outside my budget range.(student)
2) I am not sure if I would be happy with the lower end thinkpads/Dells/HP.
So any suggestion at thi\s point?
Would replacing a motherboard be worthwhile(The technician told me it would be around 300- 350 range.
Should I go with a new one or should I get the motherboard replaced?

Ouch...
What else is broken on it? Did any other parts survive the dunking- the screen, hard drive, RAM, battery, keyboard/UltraNav, fingerprint reader, speakers, or other motherboard modules such as WiFi and Bluetooth?
It might be a good idea to try to score a used one through the usual channels- they're around that costly (less than $450 anyways)- and just write off the other one, depending on how many other parts still work.
How much water did it fall into, anyways? Was it a full 5-gallon jug, or was it just an inch or two of water that killed it?

Blue & White motherboard replacement

Hi,
I own a Blue & White G3 350 with an original motherboard (not the Rev2). I'd like to buy a Rev2 motherboard and do a swap. The Rev2 motherboard that I am looking to buy has a G3 450 processor on it. One look at my list of Macs at the bottom of this post (I still own them all) will tell you that I'm no stranger to the Mac platform. I have upgraded hard drives/optical drives, RAM, video and audio cards, but have never attempted anything like a complete motherboard replacement. How easy is it and is there anything special I need to do? Also, would there be any compatibility issues regarding the systems from one revision to the next?
Thanks in advance...
Mac +, Mac SE30, Mac II, Powerbook 140, Performa 6400/180, G3 233MT, G3 350 B&W, Mac OS X (10.4.5) G4 500 DP, G5 2.0 DP.

You will need a grounding wrist strap and a #2 Phillips screwdriver. When you get all the screws out, the board slides about 1/4 inch away from the backpanel and then you lift it gentely up and out.
When you are done, you may need to do a firmware update, which requires some version of Mac OS 9 on a Hard drive (not just a CD).
A PRAM backup battery anywhere near 3.2 Volts in your hand will be dead soon.
Superstition says that if it will not start after the swap, even with a good battery and a CUDA Reset, holding down command Option P R while you press the start button on the keyboard may give better results.

Optiplex 745 image blue-screening

NetWare 6.5 sp 7
ZENworks 7.0.1.60706 (sp1 suite 3e)
Optiplex 745, Windows XP
We were able to image these workstations during fall of 2007 using the zenworks that was on the server at the time, 7.0.1.7020
Customer mentioned to me that this summer when the went back to re-image the workstations all of them that were imaged started booting Windows long enough to see the XP logo, then it pops to a blue screen, "A problem has been detected and Windows has been shut down to prevent damage to your computer."
This puzzles me, as I know that nothing has changed with the image.
I've checked the SATA drive settings, and have tried both "normal" and "legacy", with no change.
I've downloaded and am using the imaging files from "zen7sp1ir3a_hp2-december_08".
I would appreciate any suggestions on how to fix this problem. This customer is getting turned off of ZEN imaging because of this.
Thanks in advance,
Alan

Is there a STOP message?
"zeffan" <[email protected]> wrote in message
news:[email protected]..
>
> NetWare 6.5 sp 7
> ZENworks 7.0.1.60706 (sp1 suite 3e)
> Optiplex 745, Windows XP
>
> We were able to image these workstations during fall of 2007 using the
> zenworks that was on the server at the time, 7.0.1.7020
>
> Customer mentioned to me that this summer when the went back to
> re-image the workstations all of them that were imaged started booting
> Windows long enough to see the XP logo, then it pops to a blue screen,
> "A problem has been detected and Windows has been shut down to prevent
> damage to your computer."
>
> This puzzles me, as I know that nothing has changed with the image.
> I've checked the SATA drive settings, and have tried both "normal" and
> "legacy", with no change.
>
> I've downloaded and am using the imaging files from
> "zen7sp1ir3a_hp2-december_08".
>
> I would appreciate any suggestions on how to fix this problem. This
> customer is getting turned off of ZEN imaging because of this.
>
> Thanks in advance,
>
> Alan
>
>
> --
> zeffan
> ------------------------------------------------------------------------
> zeffan's Profile: http://forums.novell.com/member.php?userid=21925
> View this thread: http://forums.novell.com/showthread.php?t=355404
>

Yoga 2 Pro motherboard replacement -- are different configs interchangeable?

I bought a Yoga 2 Pro laptop in February 2014 (so it's out of warranty) -- Core i5 with 8GB of RAM. Unfortunately, 2 days ago it randomly turned off (with the keyboard backlight and power button LED flashing about every 3 seconds). I've been able to turn it back on twice, but the problem still persists. From looking around this forum, the problem is likely faulty RAM, which means a motherboard replacement is in order.I am unable to find the exact same motherboard for sale online, but I found the Core i7 with 8GB RAM version. Are the two motherboards interchangeable? Has anyone successfully done this? Thanks in advance!

Despite lack of an answer, I went ahead and bought the i7 version. I can confirm the two are indeed interchangeable.So, if you're looking to upgrade your existing Yoga 2 pro, it can be done via a motherboard replacement (though not exactly cheaply). My laptop now works again (knock on wood that it won't start acting up again). However I can't say that I've been impressed with its quality so far Forgot to mention: taking my laptop apart and putting it back together again fixed a minor screen alignment issue (screen was not 100% aligned with base when closed). It always bugged me (though not enough to RMA), and I'm not sure why it shipped out new from the factory like that but I'm glad I was able to fix this as well.

Optiplex 745 motherboard replacement

Similar Messages

Maybe you are looking for