Optus Huwaie USB not working with Macbook Air

I have a Macbook Air (mid 2011) running Yosemite 10.10.1
Using an Optus USB Modem (E3276 V2 4G) by Huwaie and it I think there is a compatibility issue. … I tried the modem on my Macbook .. no problem at all.
After launching on the Air, the USB dongle glows Blue which represent connection - status on Optus window says ‘connected' but there is in fact no internet connection at all and no kbps activity either way. I have seen a few similar posts on various forums but haven't so far understood what they are on about. Ideas? Thanks

You should be contacting the technical support of the Internet carrier for assistance. It is their responsibility to be compatible with Apple.
Ciao.

Similar Messages

Verison MIFI is not working with MacBook Air

Can't get the Mifi working with my Air. Says is is working but can't open any internet site. Help!!

Is there a TC involved here somewhere?
Check the network values that the airport has obtained.. does it include router (gateway) and dns. if not add them manually.

Handoff not working with Macbook air (mid 2012)

So, I just updated to Yosemite and I have enabled all the settings on my Macbook Air (mid 2012), iPhone and iPad. Turned on blutooth, same wifi network, etc... Handoff DOES work from my Mac to the iPhone but will not work from my iPhone to my mac. I've searched high and low and can't figure out why its not working... Any ideas?

*UPDATE* I was able to drop a file to my iPhone via AirDrop FROM my MBP to iPhone. However, I've still been unable to do the reverse (iPhone to MBP).
Same exact situation with same exact MBP (mid 2012 machine). iPhone 5S running iOS 8. I had been trying to go iPhone to MBP for about 30 minutes with no success. Neither Handoff or AirDrop would work. The MBP would recognize the iPhone in AirDrop, but the iPhone would never recognize the MBP as a location to "drop" to.
After reading you post, I tried the reverse (MBP to iPhone). I started an e-mail and got the mail icon on my iPhone lock screen. However, when trying to access the message on the iPhone i received connectivity errors and the "draft" never loaded.
Perhaps the server on the cloud they use for the handoff/airdrop/continuity feature is overloaded due to the rollout. Either way it's entirely more complex to use then it should be.

IPhone hotspot not working with MacBook air

Hi this is my first post I think and I'm hoping for a fix to my issues.
My iPhone 4S hotspot won't work when connected to my MacBook Air in either USB mode or wireless/Bluetooth.
A few weeks back I had the same issue, took both iPhone and MacBook to my local apple store and the tech deleted a folder from the mac and it fixed the issue.
I don't know which folder he deleted, he said they were network configuration files that would regenerate themselves.
Anyway it has been working fine for a few weeks but tonight it has ceased to connect again. I'm working overseas and don't have access to the apple store so I'm hoping someone here can advise me which files I need to delete Again to get this hotspot working.
Both iPhone and MacBook have the very latest software update both yesterday and it did work fine yesterday after the update.

You couldn't have, there are no supported Bluetooth Profiles between a iMac and an iPhone outside of Internet sharing.
In which case you need to enable the internet Sharing over bluetooth on the Mac before trying to pair.
Other than that there's no way to pair them.

Why is HP Photosmart C4780 wi-fi not working with MacBook Air?

My HP Photosmart C4780 and my MacBook Air seem incapable of maintaining a wi-fi connection.
My printer will work with a wired connection but the combined scanner no longer works at all.
I have installed and uninstalled the printer on numerous occasions it works as soon as it is reinstalled but this never lasts.
I am out of guarantee with HP and Apple and have paid HP Several times for help but I am wondering if it would be better to buy another printer.
Any help would be gratefully received.

First try Reset Printing System, a menu choice in Printer Setup Utility. You'll have to re-Add the printers (don't "install" drivers or any software though).

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

I just switched from pc and want to get printer drivers to work with macbook air. How do I do that?

I just switched from pc and want to get my HP all in one printer to work with macbook air. Is it just as simple as downloading drivers from HP?

Turn the printer on and plug the printer into the MBA and your mac should install the printer for you (usually any necessary drivers too). I had a printer I used on a pc and I plugged it into my macs usb port and my mac automatically recognized it and took care of everything for me. If you do this and it wont print, then yes go to the HP website the install latest drivers for 10.7
Also, as a new mac user you should find these articles helpful:
http://www.apple.com/support/switch101/
http://www.apple.com/support/mac101/
http://support.apple.com/kb/HT2477
http://support.apple.com/kb/HT1343

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

Ahmed
Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
Pattie

External Monitor Not Working With Macbook Pro

My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
I need to get this problem fixed ASAP, any help is appreciated.
Kind Regards,
Sergee237

I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

External isight not working with Macbook Pro early 2008

My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
Unfortunately, I have no other firewire device to check the port.
Any ideas, dear community?

Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage. (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.)
You have tried several good things and may be finding that your old iSight needs work.
Here are the alternatives I can offer. Consider any you have not tried in any order you like:
(1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
Test in more than one user account and with more than one Apple softwre application.
(2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
(3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
(4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
(5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
Message was edited by: EZ Jim

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

Webcam not working with adobe air

hey frnds,
i'm trying to capture webcam snaps and storing it on local desktop.
Below code of capuring snap is working with flex but same code not working in adobe air.
I'm using Adobe Flash builder beta 2
is any setting is required to use webcam with adobe air?
i'm using following code
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/halo" creationComplete="init();">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.core.UIComponent;
            import flash.media.Camera;
            import flash.media.Video;
            private function videoDisplay_creationComplete() : void
                var camera:Camera = Camera.getCamera();
                if (camera)
                    videoDisplay.attachCamera(camera);
                else
                    Alert.show("Oops, we can't find your camera.");
            private function capture_click() : void
                var snap:BitmapData = new BitmapData(320, 240, true);
                var snapBmp:Bitmap = new Bitmap(snap);
                snapBmp.width = 320;
                snapBmp.height = 240;
                if(snapshotHolder.numChildren > 0)
                    snapshotHolder.removeChildAt(0);
                snapshotHolder.addChild(snapBmp);
                snap.draw(videoDisplay);
    ]]>
    </fx:Script>
    <mx:HBox>
        <s:Panel title="Video">
            <mx:VideoDisplay id="videoDisplay" creationComplete="videoDisplay_creationComplete();" width="320" height="240" />
        </s:Panel>
        <s:Panel title="Snapshot">
            <mx:UIComponent id="snapshotHolder" width="320" height="240" />
        </s:Panel>
    </mx:HBox>
    <mx:HBox>
        <mx:Button label="reload camera" click="videoDisplay_creationComplete();"/>
        <mx:Button label="capture" click="capture_click();"/>
    </mx:HBox>
</s:WindowedApplication>
Camera is connected but cannot see anything inair,
plz guide me in this.
thx in advanced,

I seem to have the same problem. When creating an web application it works fine, but when creating a desktop application it doesn't. I can't figure out what the problem is.
Does anyone know?

Iphone 4 not connecting with macbook air using USB

I am not able to connect my iPhone 4 with my Macbook Air using USB cord. Macbook Air is not able to detect the device.

I had this problem when connecting my iphone 4 to my retina MacBook Pro. The phone was running ios 6 but I updated it to ios 7 and since then it works fine with no problems. Try updating it to the latest software and see does that help!

Camera is not working on MacBook Air 6,2 with Bootcamp and Windows 7 Pro 64-bit -- how to fix?

I have a MacBook Air 6,2 that has been Bootcamp'd with Windows 7 x64 Pro. Everything works find except for the camera, which does not appear to work at all. In the Windows Device Manager it shows the camera as installed with a working driver, but the camera never turns on.
Any ideas on how to make it work?

Hi,
If there is no error after the disk checking, please temporary disable antivirus, update BIOS and device drivers such as hard drive from computer manufacturer’s
website to check the result.
If the issue persists, I suggest you boot in Safe Mode, and clear the temp folder. Delete every files that can be deleted.
C:\Users\%username%\AppData\Local\Temp
In addition, the following threads would be helpful as well.
http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/7b64e871-71be-4c5d-a4a3-502744da978b
http://social.technet.microsoft.com/Forums/en/itprovistaapps/thread/9e5b22f1-8fb3-4d70-8f79-b92c7dc6e840
Thanks,
Simida
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Optus Huwaie USB not working with Macbook Air

Similar Messages

Maybe you are looking for