ORA-00604: error occurred at recursive SQL level 1#ORA-00018
Hi All,
I have just rebuilt an existing application server, the setup I have now is a database server with oracle and two application servers. The problem I am having is whenever I bring up the new application server I get short dumps and error messages in the log which is ORA-00604: error occurred at recursive SQL level 1#ORA-00018 does anyone have an idea of why I am getting this error when the new server is started?
Thanks
Jay
hello,
the oracle error ora-00018 means
ORA-00018: maximum number of sessions exceeded
This means that too many R/3 workprocesses (new application server - additional work
processes connecting to the oracle database) try to connect to the database at the
same time. You need to increase the value for the oracle sessions in the initSID.ora
file or/and spfile.
Kind regards,
Andreas
Similar Messages
-
ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone
Hi
I'm trying to config my base_domain for SOA11g but i'm getting the following error when connecting to my Oracle XE DB to configure SOA,
please help thanks
Software installed
OS: Windows 7 64bit
DB: Oracle XE 10g
Oracle SOA 11.1.1.4.0
Oracle RCU 11.1.1.4.0
Oracle wls1034_generic
Error Detials
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_SOAINFRA
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_ORASDPM
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OSB JMS Reporting Provider
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://127.0.0.1:1521/XE;create=true;ServerName=127.0.0.1;databaseName=XE
User=DEV_SOAINFRA
Password=********
SQL Test=SELECT 1 FROM SYS.SYSTABLES
Insufficient data while reading from the network - expected a minimum of 6 bytes and received only 0 bytes. The connection has been terminated.
CFGFWK-60850: Test Failed!Hi,
Please check the timezone set in your server where Weblogic is installed. Also ensure the timezone on which your weblogic is running, the same is present in in database by querying V$TIMEZONE_NAMES table. If it is not present then please change the timezone of the server. then try to execute the steps what you are doing, it will not throw any error.
if this helps please mark.
Thanks,
Kishore -
ORA-00604: error occurred at recursive SQL level 1 + ORA-04031
Hi,
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Solaris: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
os version : SunOS oratest 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V210
SQL> show parameter sga_target
NAME TYPE VALUE
sga_target big integer 892M
SQL> show parameter shared_pool_size
NAME TYPE VALUE
shared_pool_size big integer 112M
when i do normal query i am getting ora-04031 error and 10g server is Automatic Shared Memory Management since i set sga_target and server as to do automatically readjusts the sizes of memory pools, if that is the case why it throwing ora-04031 error;
below errors showing before bounce the database
SQL> show parameter size
ORA-04031: unable to allocate 3840 bytes of shared memory ("shared
pool","unknown object","sga heap(1,0)","kglsim object batch")
SQL> select * from tab
2 ;
select * from tab
ERROR at line 1:
ORA-04031: unable to allocate 3840 bytes of shared memory ("shared
pool","select * from tab
","sga heap(1,0)","kglsim object batch")
alert log file:
Errors in file /oracle/admin/appsdb/bdump/appsdb_smon_19154.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 3840 bytes of shared memory ("shared pool","unknown object","sga heap(1,0)","kglsim object batc
h")
Thanks
PrakashEdited by: prakashdba on Jan 10, 2009 12:31 AM
Edited by: prakashdba on Jan 10, 2009 4:10 AMAnd your version number is?
And your patch level is?
And your hardware and operating system are?
What did you find when you looked this up at metalink?
Did you follow the advice in the metalink Knowledge Base docs? -
ORA-00604: error occurred at recursive SQL level 1 ORA-12705: invalid or un
Hello, I'm so worried because I can't resolve the following problem with my oracle clients on my desktop.
Initial state:
SO: Windows XP SP1
Oracle clients: Oracle 8i
Issue: I can get connection and access to the DB successfully
Middle state:
SO: Windows XP SP1
Oracle clients: The same Oracle 8i and a new Oracle 9 client.
Issue: We need to swap between each DB 8 and 9 using the HOME SELECTOR to get connections and access. I understand that the Oracle 9 Client have back-compatibility with 8i DBs. If I tray to get connection to the DB 8i using the Oracle 9 we get the following errors.
Errors: ORA-00604: error occurred at recursive SQL level 1
ORA-12705: invalid or unknown NLS parameter value specified
I decided to uninstall all the products (Oracle 8 and 9) using the Oracle Universal Installer. We didn't erase folders nor registers, we just used Oracle Universal Installer. Then we installed Oracle 10g
Final Sate:
SO: Windows XP SP1
Oracle clients: only Oracle 10g
Issue: I can get connection and access to the Oracle 9 DB. But trying with the Oracle 8i DB I got the same problem described above.
Errors: ORA-00604: error occurred at recursive SQL level 1
ORA-12705: invalid or unknown NLS parameter value specified
Please can somebody tell me how can I resolve this problem.
Thanks.
Luis CarlosYou need to check you're NLS environment settings, check out this thread
ORA-12705: invalid or unknown NLS parameter value specified -
ORA-00604: error occured at recursive SQL level 1 ORA-12705: Cannot access
Oracle Database 10g Express Edition Release 10.2.0.1.0 on
OS Linux Debian 3.1_r4_stable
SQL> select userenv('LANGUAGE') from dual;
USERENV('LANGUAGE')
RUSSIAN_RUSSIA.AL32UTF8
Client OS MS Vista Ultimate EN , region=RUSSIAN.RUSSIA
Oracle Developer suite 10
SQL-Developer
Version 1.1.0.23.
NLS_LANG=RUSSIAN_RUSSIA.CL8MSWIN1251
Oracle Developer suite 10 is working properly but when
i am attempting a connection between Oracle 10g XE and SQL-Developer.
Need some help to resolve this error message....
ORA-00604: error occured at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid enviroment specifiedHi,
You have to set NLS_LANG before connect to Oracle Database.
$export NLS_LANG=.AL32UTF8 -
Hi all,
i have the following code:
DROP TYPE unit_function FORCE
DROP TYPE unit_moving_point FORCE
DROP TYPE moving_point_tab FORCE
DROP TYPE moving_point FORCE
DROP TABLE moving_object_ref
DROP TABLE moving_point_ref
CREATE OR REPLACE TYPE unit_function AS OBJECT
xi NUMBER,
yi NUMBER
CREATE OR REPLACE TYPE unit_moving_point AS OBJECT
p tau_tll.d_period_sec,
m unit_function
CREATE OR REPLACE TYPE moving_point_tab AS TABLE OF unit_moving_point;
CREATE OR REPLACE TYPE moving_point AS OBJECT
u_tab moving_point_tab
CREATE TABLE moving_point_ref OF moving_point NESTED TABLE u_tab STORE AS m_u_tab
When i execute this for the first time the drop commands fail, as expected and the types/tables are successfully created. But if i try to run again the same code i get this error:
ORA-00604: error occurred at recursive SQL level 1 ORA-04063: table "HERMESL.MOVING_POINT_REF" has errors
I have tried to first drop the tables and after the types but then I get this error:
ORA-00604: error occurred at recursive SQL level 1 ORA-22914: DROP of nested tables not supported
this error occurs when the "DROP TYPE unit_function FORCE" and "DROP TYPE unit_moving_point FORCE" commands is to be executed...
Can anyone help me?
Thanks...Works on 10.1.0.3.
What is your exact version?
SQL> DROP TYPE unit_function FORCE
2 /
DROP TYPE unit_function FORCE
ERROR at line 1:
ORA-04043: object UNIT_FUNCTION does not exist
SQL> DROP TYPE unit_moving_point FORCE
2 /
DROP TYPE unit_moving_point FORCE
ERROR at line 1:
ORA-04043: object UNIT_MOVING_POINT does not exist
SQL> DROP TYPE moving_point_tab FORCE
2 /
DROP TYPE moving_point_tab FORCE
ERROR at line 1:
ORA-04043: object MOVING_POINT_TAB does not exist
SQL> DROP TYPE moving_point FORCE
2 /
DROP TYPE moving_point FORCE
ERROR at line 1:
ORA-04043: object MOVING_POINT does not exist
SQL> DROP TABLE moving_object_ref
2 /
DROP TABLE moving_object_ref
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> DROP TABLE moving_point_ref
2 /
DROP TABLE moving_point_ref
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>
SQL> CREATE OR REPLACE TYPE unit_function AS OBJECT
2 (
3 xi NUMBER,
4 yi NUMBER
5 );
6 /
Type created.
SQL> CREATE OR REPLACE TYPE unit_moving_point AS OBJECT
2 (
3 m unit_function
4 );
5 /
Type created.
SQL> CREATE OR REPLACE TYPE moving_point_tab AS TABLE OF unit_moving_point;
2 /
Type created.
SQL> CREATE OR REPLACE TYPE moving_point AS OBJECT
2 (
3 u_tab moving_point_tab
4 );
5 /
Type created.
SQL> CREATE TABLE moving_point_ref OF moving_point
2 NESTED TABLE u_tab
3 STORE AS m_u_tab
4 /
Table created.
SQL> DROP TYPE unit_function FORCE
2 /
Type dropped.
SQL> DROP TYPE unit_moving_point FORCE
2 /
Type dropped.
SQL> DROP TYPE moving_point_tab FORCE
2 /
Type dropped.
SQL> DROP TYPE moving_point FORCE
2 /
Type dropped.
SQL> DROP TABLE moving_object_ref
2 /
DROP TABLE moving_object_ref
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> DROP TABLE moving_point_ref
2 /
Table dropped.
SQL>
SQL> CREATE OR REPLACE TYPE unit_function AS OBJECT
2 (
3 xi NUMBER,
4 yi NUMBER
5 );
6 /
Type created.
SQL> CREATE OR REPLACE TYPE unit_moving_point AS OBJECT
2 (
3 m unit_function
4 );
5 /
Type created.
SQL> CREATE OR REPLACE TYPE moving_point_tab AS TABLE OF unit_moving_point;
2 /
Type created.
SQL> CREATE OR REPLACE TYPE moving_point AS OBJECT
2 (
3 u_tab moving_point_tab
4 );
5 /
Type created.
SQL> CREATE TABLE moving_point_ref OF moving_point
2 NESTED TABLE u_tab
3 STORE AS m_u_tab
4 /
Table created.
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options -
(ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone reg
i use netbeans, i am trying to connect to the oracle server. my laptops time zone is wes central africa and wen i try to connect it give dis error (ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone region not found ). it started with LOCALE NOT FOUND, then i got some tips online and now its a new error. thanks
Hi;
What is db version? You may hit bug. Please see:
Bug 5499393 - ORA-1882 from partition maintenance when territory is HUNGARY with TIMESTAMP partitioning [ID 5499393.8]
Regard
Helios -
ORA-00604: error occurred at recursive SQL level 1 ORA-01003: no statement
Hi ,
we pass Query to ref cursor using with clause and it works fine on oracle Sql but raise an error when called from
ADO.net
for example
create or replace package body abc_details
as
proedure initial (p_refcursor out sys_refcursor)
is
begin
v_sql='with a as (select ..
, b as (select * from table(emppkg.empdetails))
open p_refcursor for v_sql;
end;
with oracle 10g it works fine on Sql prompt and fetches the results but when called from ado.net it
intermitantly fetches and error "ORA-00604: error occurred at recursive SQL level 1 ORA-01003: no statement "
Please suggest
Thanks in advance.wild guess here,
but emppkg.empdetails type look's like a pl/sql type,
while it should be a sql type.
Amiel -
Hi,
This is the error I am receiving when I attempt to make a database connection on SQL Developer.
Can someone please assist me as to how to resolve this error.
Thank you
Regards
Casper SeloaneJava's Timezone.getDefaultTimezone() returns 'Etc/UTC', and this is apparently not a valid timezone in Oracle.
setting TZ='UTC' solved the problem.
But I still think this is abug in Oracle's Timezone data, as 'Etc/UTC' is indeed a valid timezone ID. -
Exc– ORA-00604: error occurred at recursive SQL level 1 ORA-01003;No Stat P
I am getting above mentioned error when calling the below procedure. Please guide me
procedure xyz(P_ROTATION_NO ,
P_VESL_NO ,
P_VESL_NAME ,
P_CM_REGN_NO ,
P_FINAL_CLOSE_STA ,
P_FROM_REG_DATE ,
P_TO_REG_DATE ,
P_FROM_ARRIVAL_DATE,
P_TO_ARRIVAL_DATE,
P_RESULT_LIST OUT SYS_REFCURSOR,
P_TOTAL_LENGTH OUT NUMBER,
P_ERROR_MESSAGE OUT VARCHAR2) AS
lv_sql1 VARCHAR2(5000);
lv_sql2 VARCHAR2(5000);
lv_whereClause VARCHAR2(5000);
BEGIN
pv_text := NULL;
lv_whereClause := ' WHERE GVM.VESL_MASTER_NUM =GVR.VESL_MASTER_NUM '||
' AND GVR.ROTATION_NO(+) = GVCH.ROTATION_NO '||
' AND GVCH.ROTATION_NO LIKE NVL(''%''||:P_ROTATION_NO|| ''%'' '||
' ,GVCH.ROTATION_NO '||
' ) '||
' AND GVR.CM_REGN_NO LIKE NVL(''%''||:P_CM_REGN_NO|| ''%'' '||
' ,GVR.CM_REGN_NO '||
' ) '||
' AND GVM.VESL_NAME LIKE NVL(''%''||:P_VESL_NAME|| ''%'' '||
' ,GVM.VESL_NAME '||
' ) '||
' AND GVM.VESL_NO LIKE NVL(''%''||:P_VESL_NO|| ''%'' '||
' ,GVM.VESL_NO '||
' ) '||
' AND GVCH.FINAL_CLOSE_STA LIKE NVL(''%''||:P_FINAL_CLOSE_STA|| ''%'' '||
' ,GVCH.FINAL_CLOSE_STA '||
' ) '||
' AND TO_CHAR(GVCH.CREATED_DATE, ''DD/MM/YYYY'') >= '||
' NVL(TO_CHAR(:P_FROM_REG_DATE, ''DD/MM/YYYY'') '||
' ,GVCH.CREATED_DATE '||
' ) '||
' AND TO_CHAR(GVCH.CREATED_DATE, ''DD/MM/YYYY'') <= '||
' NVL(TO_CHAR(:P_TO_REG_DATE, ''DD/MM/YYYY'') '||
' ,GVCH.CREATED_DATE '||
' ) '||
' AND TO_CHAR(GVR.ARRIVAL_DATE, ''DD/MM/YYYY'') <= '||
' NVL(TO_CHAR(:P_FROM_ARRIVAL_DATE, ''DD/MM/YYYY'') '||
' ,GVR.CREATED_DATE '||
' ) '||
' AND TO_CHAR(GVR.ARRIVAL_DATE, ''DD/MM/YYYY'') <= '||
' NVL(TO_CHAR(:P_TO_ARRIVAL_DATE, ''DD/MM/YYYY'') '||
' ,GVR.CREATED_DATE '||
' ) '||
' AND GVM.IS_VALID = 1 '||
' AND GVCH.IS_VALID = 1 '||
' AND GVR.IS_VLAID = 1';
lv_sql1 := 'SELECT COUNT(gvr.rotation_no)
FROM gch_vsl_close_hdr gvch,
gch_vsl_master gvm,
gch_vsl_regn gvr '|| lv_whereClause;
lv_sql2 := ' SELECT gvch.close_hdr_id,
gvch.rotation_no
gvr.cm_regn_no,
gvm.vesl_no,
gvm.vesl_name,
gvch.final_close_sta,
gvr.arrival_date,
gvch.close_date,
gvr.created_date
FROM gch_vsl_close_hdr gvch,
gch_vsl_master gvm,
gch_vsl_regn gvr '|| lv_whereClause ||' ORDER BY gvch.rotation_no';
EXECUTE IMMEDIATE lv_sql1 INTO P_TOTAL_LENGTH
USING P_ROTATION_NO,P_CM_REGN_NO,P_VESL_NAME,P_VESL_NO,P_FINAL_CLOSE_STA,P_FROM_REG_DATE, P_TO_REG_DATE, P_FROM_ARRIVAL_DATE, P_TO_ARRIVAL_DATE;
OPEN P_RESULT_LIST FOR lv_sql2
USING P_ROTATION_NO,P_CM_REGN_NO,P_VESL_NAME,P_VESL_NO,P_FINAL_CLOSE_STA,P_FROM_REG_DATE, P_TO_REG_DATE, P_FROM_ARRIVAL_DATE, P_TO_ARRIVAL_DATE;
Edited by: YKING on Apr 10, 2012 1:20 PMYKING wrote:
Please tell me without dynamic query, how to simplify the codeHello
Something like this (note this is not tested as I don't have your tables or data)...
create or replace procedure xyz_1(P_ROTATION_NO NUMBER,
P_VESL_NO NUMBER,
P_VESL_NAME VARCHAR2,
P_CM_REGN_NO NUMBER,
P_FINAL_CLOSE_STA VARCHAR2,
P_FROM_REG_DATE DATE,
P_TO_REG_DATE DATE,
P_FROM_ARRIVAL_DATE DATE,
P_TO_ARRIVAL_DATE DATE,
P_RESULT_LIST OUT SYS_REFCURSOR,
P_TOTAL_LENGTH OUT NUMBER,
P_ERROR_MESSAGE OUT VARCHAR2) AS
BEGIN
SELECT COUNT(gvr.rotation_no)
INTO P_TOTAL_LENGTH
FROM gch_vsl_close_hdr gvch, gch_vsl_master gvm, gch_vsl_regn gvr
WHERE gvm.vesl_master_num = gvr.vesl_master_num
AND gvr.rotation_no(+) = gvch.rotation_no
AND gvch.rotation_no LIKE nvl('%' || p_rotation_no || '%', gvch.rotation_no)
AND gvr.cm_regn_no LIKE nvl('%' || p_cm_regn_no || '%', gvr.cm_regn_no)
AND gvm.vesl_name LIKE nvl('%' || p_vesl_name || '%', gvm.vesl_name)
AND gvm.vesl_no LIKE nvl('%' || p_vesl_no || '%', gvm.vesl_no)
AND gvch.final_close_sta LIKE nvl('%' || p_final_close_sta || '%', gvch.final_close_sta)
AND gvch.created_date >= nvl(p_from_reg_date, gvch.created_date)
AND gvch.created_date <= nvl(p_to_reg_date, gvch.created_date)
AND gvr.arrival_date <= nvl(p_from_arrival_date, gvr.created_date)
AND gvr.arrival_date <= nvl(p_to_arrival_date, gvr.created_date)
AND gvm.is_valid = 1
AND gvch.is_valid = 1
AND gvr.is_vlaid = 1;
OPEN P_RESULT_LIST FOR
SELECT gvch.close_hdr_id,
gvch.rotation_no gvr.cm_regn_no,
gvm.vesl_no,
gvm.vesl_name,
gvch.final_close_sta,
gvr.arrival_date,
gvch.close_date,
gvr.created_date
FROM gch_vsl_close_hdr gvch, gch_vsl_master gvm, gch_vsl_regn gvr
WHERE gvm.vesl_master_num = gvr.vesl_master_num
AND gvr.rotation_no(+) = gvch.rotation_no
AND gvch.rotation_no LIKE nvl('%' || p_rotation_no || '%', gvch.rotation_no)
AND gvr.cm_regn_no LIKE nvl('%' || p_cm_regn_no || '%', gvr.cm_regn_no)
AND gvm.vesl_name LIKE nvl('%' || p_vesl_name || '%', gvm.vesl_name)
AND gvm.vesl_no LIKE nvl('%' || p_vesl_no || '%', gvm.vesl_no)
AND gvch.final_close_sta LIKE nvl('%' || p_final_close_sta || '%', gvch.final_close_sta)
AND gvch.created_date >= nvl(p_from_reg_date, gvch.created_date)
AND gvch.created_date <= nvl(p_to_reg_date, gvch.created_date)
AND gvr.arrival_date <= nvl(p_from_arrival_date, gvr.created_date)
AND gvr.arrival_date <= nvl(p_to_arrival_date, gvr.created_date)
AND gvm.is_valid = 1
AND gvch.is_valid = 1
AND gvr.is_vlaid = 1
ORDER BY gvch.rotation_no;
END;Although it would be possibly to send p_total_length back as a column in the query...that way you wouldn't get any read consistency issues between the two statements....
create or replace procedure xyz_1(P_ROTATION_NO NUMBER,
P_VESL_NO NUMBER,
P_VESL_NAME VARCHAR2,
P_CM_REGN_NO NUMBER,
P_FINAL_CLOSE_STA VARCHAR2,
P_FROM_REG_DATE DATE,
P_TO_REG_DATE DATE,
P_FROM_ARRIVAL_DATE DATE,
P_TO_ARRIVAL_DATE DATE,
P_RESULT_LIST OUT SYS_REFCURSOR
) AS
BEGIN
OPEN P_RESULT_LIST FOR
SELECT gvch.close_hdr_id,
gvch.rotation_no gvr.cm_regn_no,
gvm.vesl_no,
gvm.vesl_name,
gvch.final_close_sta,
gvr.arrival_date,
gvch.close_date,
gvr.created_date,
COUNT(gvr.rotation_no) OVER() total_length
FROM gch_vsl_close_hdr gvch, gch_vsl_master gvm, gch_vsl_regn gvr
WHERE gvm.vesl_master_num = gvr.vesl_master_num
AND gvr.rotation_no(+) = gvch.rotation_no
AND gvch.rotation_no LIKE nvl('%' || p_rotation_no || '%', gvch.rotation_no)
AND gvr.cm_regn_no LIKE nvl('%' || p_cm_regn_no || '%', gvr.cm_regn_no)
AND gvm.vesl_name LIKE nvl('%' || p_vesl_name || '%', gvm.vesl_name)
AND gvm.vesl_no LIKE nvl('%' || p_vesl_no || '%', gvm.vesl_no)
AND gvch.final_close_sta LIKE nvl('%' || p_final_close_sta || '%', gvch.final_close_sta)
AND gvch.created_date >= nvl(p_from_reg_date, gvch.created_date)
AND gvch.created_date <= nvl(p_to_reg_date, gvch.created_date)
AND gvr.arrival_date <= nvl(p_from_arrival_date, gvr.created_date)
AND gvr.arrival_date <= nvl(p_to_arrival_date, gvr.created_date)
AND gvm.is_valid = 1
AND gvch.is_valid = 1
AND gvr.is_vlaid = 1
ORDER BY gvch.rotation_no;
END;And there's no need to pass an error message back, just use the exception system to propagate exceptions back to the caller.
HTH
David -
ORA-00604: error occurred at recursive SQL level 1
Hi,
i have a view as source (DB2)
Target table in Oracle with the same structure
when i view data from the view all the records are listed.
after mapping the source and target source gets fail while debuging (test data)
and also while deploying the mapping i get the following error.
Anyone knows about the following errors
ACBLODS_MAP
Create
Warning
ORA-06550: line 0, column 0:
ORA-04052: error occurred when looking up remote object [email protected]@DB2_KAPIL_LOCATION
ORA-00604: error occurred at recursive SQL level 1
ORA-28500: connection from ORACLE to a non-Oracle system returned this
please someone help me to solve this
thanks in advance
regards
rajaI had a simular problem with progress. If the progress table had to many columns
OWB was failing. The problem was the ODBC driver used to make a connection to PROGRESS. -
ORA-00604: error occurred at recursive SQL level 1 (Call to a Oracle View)
I have created a view that refers to a package function within the sql select.
Like
E.x
CREATE OR REPLACE VIEW VW_TAX
as select
test_pkg.fn_get_gl_value(acct_id) desired_col1,
test_pkg.fn_get_gl_desc_value(acct_id) desired_col2
From tables a, b
a.col= b.col
The sample function( fn_get_gl_value) is embedded into a package (test_pkg).
Function fn_get_gl_value:
It earlier referred to table A1, B1, C1 and this query took really long, Therefore I used object type tables and stored the values required once within the package when it is invoked. Later I used the Tables A1, B1 and C1(table Cast from the type Table Loaded in Package Memory)
The query was fast and fine, but now when I try to re-use the view
select * from VW_TAX
where acct_id = '02846'
It fails with this message
09:32:35 Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
Note: The database is Oracle8i Enterprise Edition Release 8.1.7.4.0.
Maximum cursors database is 500
Please let me know if there is any known solution,
Appreciate all your help
Thanks
RPSeems like your OPEN_CURSORS init.ora parameter is set too low.
See Metalink Note:1012266.6 for details.
ORA-01000: "maximum open cursors exceeded"
Cause: A host language program attempted to open too many cursors.
The initialization parameter OPEN_CURSORS determines the
maximum number of cursors per user.
Action: Modify the program to use fewer cursors. If this error occurs
often, shut down Oracle, increase the value of OPEN_CURSORS,
and then restart Oracle. -
ORA-00604: error occurred at recursive SQL level 1 and ORA-30036:
Hi Gurus,
I am trying to shrink the table segment along with indexes.
I am using
alter table OWNER.TABLE shrink space cascade; syntax but after 1 hr i got the following error.
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30036: unable to extend segment by 4 in undo tablespace 'UNDOTBS01'
UNDO tablespace has sufficient space and undo_retention is 6Hrs. What could be the problem ?
Or do i need to use
alter table OWNER.TABLE shrink space; only ?
Thanks & RegardsHi,
I am doing this in testing enviornment and before this activity added 4g space to existing 50GB undo tablespace.
No jobs are running in testing environment and the shrinking on table is of 12GB. I cann't import/export and truncate or move to different tablespaces as this has oracle advanced queue and chances are more to corrupt queues.
Thanks -
Ora-00604:error occurred at recursive SQL level 1 and Ora-04023
hi all
i am using oracle linux 5.5 and oracle Database 11g R2 while shutingdown the database i am getting
the following errors.
SQL> shutdown immediate;
Ora-00604:error occurred at recursive SQL level 1
Ora-04023: object select count(*) from reg$SQL>plz can anyone help me out?Couple of questions related to this issue:
1.Is there anything in alert log. Post last 50 lines from alert log.
2.Is there any trace / log generated by Oracle ?
3.What is Memory_Target parameter value ?
4.What is value of statistics_level parameter ?
5.Did you perform any failed upgradation ?
6.Are there any invalid objects in database ?
Generally ORA-00604 is related to insufficient size of shared pool. Now, i am googling how to get a proper value of shared pool size ? I got that there is a view v$shared_pool_advice which will tell me the answer of this question. Ok, it means now question is how do i get the proper value of shared pool from v$shared_pool_advice; i mean how do i interpret this v$shared_pool_advice view ?
No problem docs are there to answer this question : (How i got this link ? Open a new page---http://tahiti.oracle.com---selected 11.2 docs--in the left hand sided there is a search text box i entered v$shared_pool_advice and i got couple of links)
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/dynviews_3037.htm#REFRN30239
I will read these links and now i will query this and DBA_HIST_SHARED_POOL_ADVICE views, interpret the values. Ok, but what about my original question i.e. ORA-00604 and 4023 ? If i am at this stage, understood all the values, it means now i can understand the meaning / sense of resizing of shared pool.
ALTER SYSTEM SET statistics_level=TYPICAL SCOPE=SPFILE;
You can monitor V$SGA_RESIZE_OPS to identify the range of values that Oracle is automatically resizing the DB_CACHE_SIZE and SHARED_POOL_SIZE components to. Then, pick an appropriate minimum value based on the range. There's no "magic formula". But V$SGA_RESIZE_OPS shows the sizes that Oracle has been automatically been resizing the SGA components to. The Buffer Cache Advisory section of the AWR report or V$DB_CACHE_ADVICE, V$SHARED_POOL_ADVICE, V$SGA_TARGET_ADVICE and DBA_HIST_SGA_TARGET_ADVICE are views that provide advisory information as well. Hemant @ SGA_MAX_SIZE and SGA_TARGET how to set minimum for pools
So, these are the baby steps if i ever gets ORA-00604 and ORA-04023 on my test database. Do all these and feel free to post the next doubt, i am sure you will get the correct answer.
Regards
Girish Sharma -
ORA-00604: error occurred at recursive SQL level 1 (10G)
I was adding a default schema setting to a user id, saved the role and got the above error. ID hidden. All the roles below had default already added but had not caused error and some had been in place since Oracle9i
SQL> REVOKE "ROL_HOBSONS_SCHEMA_VIEWS" FROM <USER ID>
Revoke complete.
SQL> GRANT "ROL_HOBSONS_SCHEMA_VIEWS" TO <USER ID>
Grant complete.
SQL> ALTER USER <USER ID>
DEFAULT ROLE "DBA", "ROL_IRIS_CONVERSION", "ROL_UKFRSRPT_VIEW", "ROL_UKFRS_TRANS", "ROL_UKFRS_VIEW", "ROL_UKHRS_RPT", "ROL_UKSISRPT_FAMSBR", "ROL_UKFRS_RPT2", "ROL_CM_IT_CPE", "ROL_UKSISRPT_ VIEW", "CONNECT", "ROL_HOBSONS_SCHEMA_VIEWS", "RESOURCE", "ROL_NEW_UKSIS_VIEWS_IN_TEST", "ROL_HOBSONS_SCHEMA_VIEWS"
ALTER USER <USER ID>
DEFAULT ROLE "DBA", "ROL_IRIS_CONVERSION", "ROL_UKFRSRPT_VIEW", "ROL_UKFRS_TRANS", "ROL_UKFRS_VIEW", "ROL_UKHRS_RPT", "ROL_UKSISRPT_FAMSBR", "ROL_UKFRS_RPT2", "ROL_CM_IT_CPE", "ROL_UKSISRPT_ VIEW", "CONNECT", "ROL_HOBSONS_SCHEMA_VIEWS", "RESOURCE", "ROL_NEW_UKSIS_VIEWS_IN_TEST", "ROL_HOBSONS_SCHEMA_VIEWS"
Error at line 4
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_DEFROLE1) violated
The original change was made by a dba using current Oracle OEM. I accessed using TOAD10 to update another user with a default check mark. Upon trying to save, I got the above error. The updated access remained even though it gave an error and the user reported being able to get to her data. However, any changes to the role with adding or removing admin or default will display the error.
Any ideas?
thanks JohnHi,
Oracle makes an entry in SYS.DEFROLE$ table for a pair of user and default role.
You are getting the error as some of the roles you are now assigning are already default roles for this user and hence UK violation.
You can make use of *"sys.KU$_DEFROLE_LIST_VIEW"* to find already existing records. (see ex below)
SQL> select * from sys.KU$_DEFROLE_LIST_VIEW;
USER_ID USER_NAME ROLE ROLE_ID
69 SRICKMAN DBA 4
69 SRICKMAN ORACLE_DBA 156Find already existing entries for your user, remove those roles from your query and try again.
Regards,
Ullhas
Maybe you are looking for
-
Hp officejet 6700 premium printer-printer failure
I bought a HP officejet 6700 premium a month ago. I installed the printer and it printed ok. But after a few day of use, it suddenly stopped printing and gave a Printer Failure massage on the front control panel. The message says: There is a probl
-
Unable to open CR2 file in elements 11
Everytime I try to open a CR2 file i get an error saying "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentatio
-
Double click on Dock to open an app? Seems a change from 10.6.8.
Is it now necessary to double click on an icon in the Dock to open an app? When did this change get made? I find it more inconvenient compared to the single click on 10.6.8. But then again I found 10.6.8 more convenient in general. Hated losing v
-
4.5 OS for Verizon 8830 - memory issues
I upgraded my VZ 8830 to 4.5, and it looks great, but I have noticed I am losing memory even if the phone is not "active" (translation: not on a call, not using the browser or apps, etc.). I started out with about 16MB and went to 14MB in about 5 m
-
Finding SQL statements in cache
So I was trying to illustrate how Oracle statements issued with bind variables show up only once in the Shared Pool, and the following failed to display this info (I was getting a test case working before I incorporated Bind Vars): SQL> begin 2 f