ORA-00701 error in alterfile and smon trace every 10 seconds

OS:redhat 5.2 64bit
DB:oracle 10.2.0.4 64bit
ORA-00701 errors happen every 10 seconds in alterfile and smon tracefile.
Except this error all seem OK.
Mon Sep 13 10:58:56 2010
Errors in file /opt/oracle/admin/pubb/bdump/pubb_smon_14031.trc:
ORA-00701: object necessary for warmstarting database cannot be altered
Mon Sep 13 10:59:06 2010
Errors in file /opt/oracle/admin/pubb/bdump/pubb_smon_14031.trc:
ORA-00701: object necessary for warmstarting database cannot be altered
Mon Sep 13 10:59:17 2010
Errors in file /opt/oracle/admin/pubb/bdump/pubb_smon_14031.trc:
ORA-00701: object necessary for warmstarting database cannot be altered
Mon Sep 13 10:59:27 2010
Errors in file /opt/oracle/admin/pubb/bdump/pubb_smon_14031.trc:
ORA-00701: object necessary for warmstarting database cannot be altered
I check the SYS objects,all is valid except package DBMS_JVM_EXP_PERMS.

Dear gaoyafang,
Please see Laura Gaigala's answer to the "Warmstart";
Warm start instance
Here is the error message and the action;
http://ora-00701.ora-code.com/
+"+
+ORA-00701:+
+     object necessary for warmstarting database cannot be altered+
+Cause:      Attempt to alter or drop a database object (table, cluster, or index) which are needed for warmstarting the database.+
+Action:      None.+
+"+
I think you may need to shutdown the database with either normal, immediate or transactional options and than startup the database. If your problem still persists after that, please log an SR call at the Metalink.
Here is another useful thread;
Re: ORA-00701
Hope That Helps.
Ogan

Similar Messages

Why does my ipod touch 5th gen not charge when plugged into my computer? (it keeps stuttering(lightning symbol next to bettery goes on and off literally every second))

so I have my ipod touch 5th gen connect and the little lightning symbol, next to the battery on the top left, keeps flashing on and off every second. I don't know what to do and also it doesn't show up on iTunes.

Hey Ed, Try trouble shooting 101. Do you have a different cable and/or charging device? If so, try the different cable first, then a different charging device. If the problem goes away, I'd say it's the cable, replace it. If with in 1 from date of purchase, Apple will replace for free if the cable is found to be defective. If the problem continues with a different cable or a different charging device, then the problem is with your iPod. With a strong light and a magnifying glass look in the iPod's charging port. Your looking for damage in and around the port. Is the port lose? (shouldn't be). Are pieces missing or damaged? Bent or damaged contact pins can do what you describe. Foreign debris, namely pocket lint or corrosion can also cause charging issues. If you see something like lint, try to blow it out, or if you must use a non-conductive probe, I find a round wooden toothpick works well to carefully remove the lint from the bottom of the port. Just be careful to not touch, bend or damage the gold contact pins on the long side of the port. Also make sure the locking pins on the short ends (looks like two silver bumps, one on each end) of the port are free to move. If you find corrosion, try plugging / unplugging about 12 times to clean the contacts off. If you must use a cotton swab cut to fit, with a drop of 91% isopropyl alcohol on it, you want it damp, not wet, then plug it in and out until the swab comes out clean. You will most likely need several swabs. If you find nothing physically wrong, then try resetting your iPod. If that does not work, restore from backup, last resort, make a backup then restore to new, a full factory restore. If issue continues see your Apple store and have it evaluated for a possible hardware issue. But start with a different or new cable. Good luck, Cheers.

ORA-00932 Error using 11g and the SDO_RELATE function. Works fine in 10g

Hello,
If I run this query in Oracle 11g:
SELECT M.FID, MAX(M.VERSION) AS VERSION
FROM SW_PB.A_ROADNODEINFORMATION M, SW_PB.ROADNODE N
WHERE M.REFERENCETOROADNODE = N.FID
AND M.NODEVERSION = N.VERSION
AND M.CATALOGUEID <= 477
AND MDSYS.SDO_RELATE( N.GEOM, MDSYS.SDO_GEOMETRY(2003,81989,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(120000,0,160000,40000)),'MASK=ANYINTERACT QUERYTYPE=WINDOW') = 'TRUE'
GROUP BY M.FID;
I get an error regarding the N.GEOM field. The error is as follows:
ORA-00932: inconsistent datatypes: expected - got MDSYS.SDO_ELEM_INFO_ARRAY
The same query runs fine on a 10g database with the same data. I've even truncated the N table and still get the error. I've rebuilt the index but it makes no difference and the metadata is exactly the same for this table as it is for other tables that are involved in a similar query.
It looks like a bug to me but just wondered if anyone else had come across this?
Thanks,
Peter.

Thanks for the reply. I'm really sorry but I haven't created trace files like this for a very long time and have forgotten the best way to read them. This is the start of the trace file, any help with reformatting it would be greatly appreciated.
Thanks,
Peter.
*** 2009-04-23 17:09:22.902
----- Error Stack Dump -----
*** 2009-04-23 17:09:22.917
ORA-00932: inconsistent datatypes: expected - got MDSYS.SDO_ELEM_INFO_ARRAY
----- Current SQL Statement for this session (sql_id=br02jqdwy2utk) -----
SELECT M.FID, MAX(M.VERSION) AS VERSION
FROM SW_PB.A_ROADNODEINFORMATION M, SW_PB.ROADNODE N
WHERE M.REFERENCETOROADNODE = N.FID
AND M.NODEVERSION = N.VERSION
AND M.CATALOGUEID <= 477
AND MDSYS.SDO_RELATE( N.GEOM, MDSYS.SDO_GEOMETRY(2003,81989,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(120000,0,160000,40000)),'MASK=ANYINTERACT QUERYTYPE=WINDOW') = 'TRUE'
GROUP BY M.FID
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
skdstdst()+114      CALLrel kgdsdst()+0 FB783A0 2
ksedst1()+91        CALLrel skdstdst()+0
ksedst()+50         CALLrel ksedst1()+0 0 1
dbkedDefDump()+298 CALLrel ksedst()+0 0
5
ksedmp()+40         CALLrel dbkedDefDump()+0 3 0
_dbkdaKsdActDriver( CALLreg 00000000             3
)+841
_dbgdaExecuteAction CALLreg 00000000             7B50420 FB79A4C
()+63
dbgdaRunAction()+3 CALLrel dbgdaExecuteAction 7B50420 4D4C148 20C0002
02 ()+0 FB79A4C
dbgdRunActions()+4 CALLrel dbgdaRunAction()+0 7B50420 A789E54
4
dbgdProcessEventAc CALLrel dbgdRunActions()+0 7B50420 A789E74
tions()+446
__VInfreq__dbgdChkE CALLrel _dbgdProcessEventAc 7B50420 120A3370 A789F64
ventKgErr()+237 tions()+0
dbkdChkEventRdbmsE CALLrel dbgdChkEventKgErr( 7B50420 A7C06F4 3A4
rr()+33 )+0
__PGOSF99__ksfpec() CALLrel _dbkdChkEventRdbmsE 3A4
+110 rr()+0
_dbgePostErrorKGE() CALLreg 00000000             120A3370 3A4
+1601
dbkePostKGEkgsf() CALLrel _dbgePostErrorKGE() 120A3370 A772020 3A4
+49 +0
_kgeade()+268        CALLreg 00000000             120A3370 A772020 3A4
kgesev()+54         CALLrel kgeade()+0
kgesec2()+18        CALLrel kgesev()+0 120A3370 A772020 3A4 2
FB7A200
qctErr932()+217     CALLrel kgesec2()+0 120A3370 A772020 3A4 1 1
FB7A468 1 19 FB7A218
qctErrConvertDataT CALLrel qctErr932()+0 995FBCC0 120A3370 F6 FB7A468
ype()+82 7B C2E85B4 995FBCC0 120A3370
FB7A468 0 0 FB7A468 0 204
qecgby()+240        CALLrel qctErrConvertDataT 995FBCC0 120A3370 F6 0 0 7B
ype()+0 C2E85B4
qecpqbcheck()+75    CALLrel qecgby()+0
qecdrv()+161        CALLrel qecpqbcheck()+0 C2ECD7C 0 0 0
qecdrv()+74         CALLrel qecdrv()+0
kkqcttcalo()+383    CALLrel qecdrv()+0 C2EFBAC
kkqctdrvGBP()+1841 CALLrel kkqcttcalo()+0 C2EFBAC 0 C2EFBAC 166A5D4 0 2
__VInfreq__kkqgbpTr CALLrel _kkqctdrvGBP()+0     A730DD8
avChkTran()+193
_qksqbApplyToQbcLoc CALLreg 00000000             A730DD8 FB7A9BC
()+536
qksqbApplyToQbc()+ CALLrel qksqbApplyToQbcLoc
67 ()+0
kkqctdrvTD()+1000   CALLrel qksqbApplyToQbc()+ A730DD8 2EF2DA0 FB7A9BC 0
0
kkqgbpdrv()+88      CALLrel kkqctdrvTD()+0 A754820 995FBDF4 6
kkqdrv()+1520       CALLrel kkqgbpdrv()+0 A754820 995FBDF4
kkqctdrvIT()+698    CALLrel kkqdrv()+0 A754820 0
apadrv()+1205       CALLrel kkqctdrvIT()+0 A754820 995FBDF4
opitca()+1841       CALLrel apadrv()+0 995FBDF4
__PGOSF435__kksFull CALLrel _opitca()+0          A7CC9E4 995FBDF4
TypeCheck()+15
_rpiswu2()+560       CALLreg 00000000             FB7B718
kksLoadChild()+860 CALLrel rpiswu2()+0 AF495220 5 A77DCBB4 16
8 94591E54 5 A77DCBE0 0 FB7B670
615F44 0 FB7B718 0
kxsGetRuntimeLock( CALLrel kksLoadChild()+0 120A3370 AE9130D8 FB7C090
)+1421
kksfbc()+8954       CALLrel kxsGetRuntimeLock( 120A3370 A7CC9E4 FB7C090 3 1
)+0
kkspsc0()+1882      CALLrel kksfbc()+0 A7CC9E4 3 108 FB7D2D8 1BB 0 0
0
kksParseCursor()+1 CALLrel kkspsc0()+0
43
opiosq0()+2028      CALLrel kksParseCursor()+0 FB7C610
kpooprx()+273       CALLrel opiosq0()+0 3 E FB7C734 A4
kpoal8()+729        CALLrel kpooprx()+0 FB7F214 FB7D2D8 1BA 1 0 A4
_opiodr()+1224       CALLreg 00000000             5E 1C FB7F210
_ttcpip()+2733       CALLreg 00000000             5E 1C FB7F210 0
_opitsk()+1278       CALL??? 00000000
opiino()+1067       CALLrel opitsk()+0 0 0
_opiodr()+1224       CALLreg 00000000             3C 4 FB7FC28
opidrv()+807        CALLrel opiodr()+0 3C 4 FB7FC28 0
sou2o()+45          CALLrel opidrv()+0 3C 4 FB7FC28
opimaireal()+130 CALLrel _sou2o()+0           FB7FC1C 3C 4 FB7FC28
opimai()+92         CALLrel opimai_real()+0 2 FB7FC54
OracleThreadStart@ CALLrel opimai()+0
4()+764
77E6482C CALLreg 00000000
00000000 CALL??? 00000000

Iphone4, starts and stops charging every second.

Hi,
super frustrated here. I have an iPhone 4. I recently replaced the battery in an Apple store. for the first 2 weeks everything was fine, but recently everytime I plug it in to charge it vibrates twice to indicate that its charging then stops and starts again about every 1-2 seconds. I have taken it to apple so they could re seed the battery and clean out the ports and make sure its nothing on the wear and tear end but nothing works. and since my warrenty is out im out of luck in terms of a free swap. has anyone heard of this issue or any fixes? is it a hardware issue or could it be software? maybe a bad app install? any thing helps here. thanks
Evan

I checked today
the battery started the charging loop at 99%, BUT (each time it re-started charging) there was 1 hour left for full charge.
I hope somebody can help me

How do I get a two line graph to show all the months in the data table and not just every second one?

My two line graphs covers six months, but only shows three months How can I make it show all six months

select the chart, then open the Chart Formatter:
Then click "Axis", then "Category (X)"
Change the "Label Angle" to "Left Vertical" or "Right Vertical"

Dropping Tablespaces ORA 23515 Error

Hi
I am trying to drop a tablespace
DROP TABLESPACE EXAMPLE INCLUDING CONTENTS AND DATAFILES;
I get ORA 23515 Error " Materialized Views and /or their indices exist in the Tablespace"
How to find out which Materialized views and /or indices are to be dropped? Is there a way to find them?

You can find materialized views from the database using the following select
select object_name,object_type from dba_objects where owner='xxxxx' and object_type='MATERIALIZED VIEW';
and then drop the MV using command
drop materialized view xxxxx;

Random ORA-24327 errors

Enviornment:
SPARC, SunOS 5.8
Weblogic 5.1.0 Service Pack 6
Oracle 8.1.6.1 (installed in another Sun box)
driver=weblogic.jdbc20.oci.Driver
url=jdbc20:weblogic:oracle
We created 30 Initial Connections during startup which was successful. During Load test, there are many ORA-24327 errors started coming and we havenot reached the MaxCapacity (99). We did similar test couple of weeks back and not seen this error.
Oracle is not of much help since we are using WebLogic OCI driver and not their drivers (thats what told). I read many papers and not found any info.
Again, the application works and its able to make connections (NO problem with TNSNAMES.ORA file) and no error coming during startup.

Oracle is almost never helpful.
For stability and performance you should configure the pool
to make all the connections you need at startup. Set initial capacity = max capacity.
If the server boots fine, and creates all your connections, you should be OK, and
run faster too. If it doesn't make all the connections, you are either over your
Oracle license limit, or out of file descriptors in the OS process running the
JVM. Oracle's OCI library is very wasteful of file descriptors (3 per connection)
Ravy Srinivasan wrote:
>
Enviornment:
SPARC, SunOS 5.8
Weblogic 5.1.0 Service Pack 6
Oracle 8.1.6.1 (installed in another Sun box)
driver=weblogic.jdbc20.oci.Driver
url=jdbc20:weblogic:oracle
We created 30 Initial Connections during startup which was successful. During Load test, there are many ORA-24327 errors started coming and we havenot reached the MaxCapacity (99). We did similar test couple of weeks back and not seen this error.
Oracle is not of much help since we are using WebLogic OCI driver and not their drivers (thats what told). I read many papers and not found any info.
Again, the application works and its able to make connections (NO problem with TNSNAMES.ORA file) and no error coming during startup.

Ora-00604:error occurred at recursive SQL level 1 and Ora-04023

hi all
i am using oracle linux 5.5 and oracle Database 11g R2 while shutingdown the database i am getting
the following errors.
SQL> shutdown immediate;
Ora-00604:error occurred at recursive SQL level 1
Ora-04023: object select count(*) from reg$SQL>plz can anyone help me out?

Couple of questions related to this issue:
1.Is there anything in alert log. Post last 50 lines from alert log.
2.Is there any trace / log generated by Oracle ?
3.What is Memory_Target parameter value ?
4.What is value of statistics_level parameter ?
5.Did you perform any failed upgradation ?
6.Are there any invalid objects in database ?
Generally ORA-00604 is related to insufficient size of shared pool. Now, i am googling how to get a proper value of shared pool size ? I got that there is a view v$shared_pool_advice which will tell me the answer of this question. Ok, it means now question is how do i get the proper value of shared pool from v$shared_pool_advice; i mean how do i interpret this v$shared_pool_advice view ?
No problem docs are there to answer this question : (How i got this link ? Open a new page---http://tahiti.oracle.com---selected 11.2 docs--in the left hand sided there is a search text box i entered v$shared_pool_advice and i got couple of links)
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/dynviews_3037.htm#REFRN30239
I will read these links and now i will query this and DBA_HIST_SHARED_POOL_ADVICE views, interpret the values. Ok, but what about my original question i.e. ORA-00604 and 4023 ? If i am at this stage, understood all the values, it means now i can understand the meaning / sense of resizing of shared pool.
ALTER SYSTEM SET statistics_level=TYPICAL SCOPE=SPFILE;
You can monitor V$SGA_RESIZE_OPS to identify the range of values that Oracle is automatically resizing the DB_CACHE_SIZE and SHARED_POOL_SIZE components to. Then, pick an appropriate minimum value based on the range. There's no "magic formula". But V$SGA_RESIZE_OPS shows the sizes that Oracle has been automatically been resizing the SGA components to. The Buffer Cache Advisory section of the AWR report or V$DB_CACHE_ADVICE, V$SHARED_POOL_ADVICE, V$SGA_TARGET_ADVICE and DBA_HIST_SGA_TARGET_ADVICE are views that provide advisory information as well. Hemant @ SGA_MAX_SIZE and SGA_TARGET how to set minimum for pools
So, these are the baby steps if i ever gets ORA-00604 and ORA-04023 on my test database. Do all these and feel free to post the next doubt, i am sure you will get the correct answer.
Regards
Girish Sharma

Ora-00604 error while taking tkprof of a trace file

Sorry i am giving the full erro but omitting exact table names
Hi ,
I have an error while taking tkprof of a trace file.
I gave the following command ---
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela explain= /
error is --
Error in create table of EXPLAIN PLAN table : unix_session_user.prof$paln_table
ORA-00604: error occurred at recursive SQL level 1
ORA-20001: Step-6:DDL
Event Security. You are not permitted to perform the requested structural
changes to PROF (TABLE)
Event triggered : CREATE
ora_login_user
(session_user) : unix_session_user(dummy)
Search : select count(*) from
tabl(dummy table name) where obj_name like '%\%%' escape '\' and obj_type =
'TABLE' and obj_type = 'USER' and ( event_CREATE = 'Y' or status =
'Override')
ORA-06512: at line 162
ORA-06510: PL/SQL: unhandled
user-defined exception
EXPLAIN PLAN option disabled.
i searched for the error and in oracle forum i found a solution .. http://forums.oracle.com/forums/thread.jspa?threadID=844287&tstart=0
but after giving the table option it is giving the same error
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=old_schema.plan_table explain= /
it again gave the same error.
In both two cases it gives elapsed time results,library cache missing etc but before giving this it throws ORA-00604 error as stated above
then i again correct the tkprof statement ..
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=new_schema.plan_table explain= /
say this schema name here i used is dummy schema name.
My question is did this error came as we had not sufficient previlages in the old_schema but that previleges we have in new_schema?
My databse version is 9.2.0.4.0
Thanks in advance
Edited by: bp on Feb 3, 2009 11:36 PM
Edited by: bp on Feb 3, 2009 11:40 PM

Please post here full error message, there should be lines with ORA-00604 and then some other ORA as well.
And are there any trace files generated during this error?
And as You can see from error description, probably You will have to contact with Oracle support in order to solve this case:
oerr ora 00604
00604, 00000, "error occurred at recursive SQL level %s"
// *Cause: An error occurred while processing a recursive SQL statement
// (a statement applying to internal dictionary tables).
// *Action: If the situation described in the next error on the stack
// can be corrected, do so; otherwise contact Oracle Support.

Compiling error ORA-00600 with Forms 6 and Database 10g

Hi,
I am using "Oracle Database 10g Enterprise Edition Release 10.1.0.4.0" and "Forms [32 Bit] Version 6.0.8.26.0 " with patch 17, when i compile a form that works with some tables in another database under dblink the error ORA-00600:internal error code, arguments:[16203],[],[],[],[],[],[],[] is displayed.
If i word with reports or sqlplus no error is displayed.
Before we installed 10g everything worked ok
What is wrong with forms or do i need to configure something else?
Regards
Yuri V. López Manrique

I searched for this error on Google and found the following blog:
Is there a tool to troubleshoot ORA-00600 and ORA-07445 errors?
February 27th, 2006 By Fahd Mirza
ORA-00600 and ORA-07445 errors are the most esoteric errors in Oracle.
There is a tool called ORA-600/ORA-7445 Troubleshooter available at Metalink. It asks for the first argument of ORA-600 error with an optional database version number.
For example, to see the description of the error:
ORA-00600: internal error code, arguments: [723], [25908], [25908], [memory leak]
You enter 723 in the ORA-600 First Argument field. The first argument is a pointer to where in the code the error was caught and thus is the key information in identifying the problem.
You can also embed (copy/paste) the Call Stack Trace there, and, when you click on the Search Call Stack button an advanced MetaLink search is performed to find documents containing relevant sections from the call stack.
Call Stack extracts from the following files are supported:
* Generic foreground and background server trace files located in background_dump_dest and user_dump_dest
* OpenVMS NETV2 and BEQ log files located in ORA_ROOT:[NETWORK.LOG]
* WINDOWS CORE.LOG files
* GDB (debugger) backtrace call stacks (best endeavors)
Of course you will need a login to Oracle's Metalink site.
Hope that helps,
c

Ora 600 and ora 7445 error in oracle 10g r2

hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn

Hi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck

ORA-01157 and ORA-01110 errors

Dear all,
I was getting "ORA-00205: error in identifying controlfile" error while starting the database
This had happened during the investigation of the IMPORT_ABAP phase failure, during our system copy (Import)
I found out in alert_SID.log that control file was missing in 3 locations /oracle/SID/origlogA, /oracle/SID/origlogB and /oracle/SID/sapdata1
So I copied the control file from /oracle/GRD/saparch/cntrl to the above 3 locations. Now I am able to mount the database but not able to open it.
Getting the below mentioned error
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '/oracle/SRD/sapdata1/system_1/system.data1'
Any suggestions?

The control file from /oracle/SRD/saparch/cntrl was an old file so deleted it from the 3 locations as mentioned earlier
Now there is no control file in origlogA, origlobB and sadata1
Now I am getting the below mentioned error
ORA-00205: error in identifying control file, check alert log for more in
any suggestions?

ORA-00001 and ORA-06512 error on DBMS_WM.ResolveConflicts

We are getting unique constraint error in Production Database. We are able to merge most of the workspaces with no issues. One workspace is givign errors on merge.
Here is the code
begin
dbms_wm.gotoworkspace('denialletterspoc_onmzpulp');
dbms_wm.setdiffversions('denialletterspoc_onmzpulp','LIVE');
dbms_wm.SetConflictWorkspace('denialletterspoc_onmzpulp');
commit;
DBMS_WM.BeginResolve('denialletterspoc_onmzpulp');
DBMS_WM.ResolveConflicts(
workspace => 'denialletterspoc_onmzpulp',
table_name => 'MCM_MESSAGE',
where_clause => ' id in (8403026,10134822,8259485,8259488,8426289,8426287,10186643,8426288) ',
keep => 'CHILD'
exception when others then
DBMS_WM.RollbackResolve('denialletterspoc_onmzpulp');
raise;
end;
ORA-00001: unique constraint (T2.MCM_MESSAGE_PK) violated
ORA-06512: at line 16
I looked at the date in XXX_lt tables and it does not look suspecious. Please help us understand
ORA-00001 and ORA-06512 error.
Amit Gangwar

Hi, Ben
Our OWM_VERSION is 10.2.0.4.3.
I tried disable and enable constraint MCM_MESSAGE_PK. But didn't fix our issue.
Split where clause from " id in (...) " syntax to " id = ... " syntax will reduce performance heavily. And I did some test that " id in (...) " syntax works well in our dev env.
I opened our trace file and get below plsql block. When I perform it get same error with our original codes. Please notice the part of "forall wm_indx in WM_rowids.first .. WM_rowids.last execute immediate 'begin insert into T2.MCM_MESSAGE_lt ... ...", error occurred here. But if I change the "forall" syntax to normal " for ... loop" syntax then no error here. Can you give me some advice or suggestion?
DECLARE
WM_rowids wmsys.lt_ctx_pkg.rowidTabType;
WM_rowids_vt wmsys.lt_ctx_pkg.rowidTabType;
WM_curver wmsys.lt_ctx_pkg.int_tab;
WM_vtRow wmsys.lt_ctx_pkg.int_tab;
WM_nextver wmsys.lt_ctx_pkg.nextver_tab;
WM_found integer := 0;
BEGIN
dbms_wm.gotoworkspace('denialletterspoc_onmzpulp');
dbms_wm.setdiffversions('denialletterspoc_onmzpulp','LIVE');
dbms_wm.SetConflictWorkspace('denialletterspoc_onmzpulp');
/* update the auxilliary table of snapshots */
/* These are rows in the current version that have already been resolved once */
update T2.MCM_MESSAGE_aux st
set (snapShotChild, snapShotParent, versionParent) =
(select p.WM_childds, p.WM_parentds, p.WM_parentver
from T2.MCM_MESSAGE_pkc p
where p.ID = st.ID),
value = '0',
wm_opcode = 'CC'
where st.versionChild = 614
and (ID) in (select ID
from T2.MCM_MESSAGE_pkc p
where (id in (8403026,
10134822,
8259485,
8259488,
8426289,
8426287,
10186643,
8426288)));
select distinct WM_ridchild bulk collect
into WM_rowids
from T2.MCM_MESSAGE_pkc
where (id in (8403026,
10134822,
8259485,
8259488,
8426289,
8426287,
10186643,
8426288))
and WM_childver != 614;
if (WM_rowids.first is not null) then
WM_found := 1;
forall wm_indx in WM_rowids.first .. WM_rowids.last
update T2.MCM_MESSAGE_lt
set retireTime = wmsys.owm_9ip_pkg.activeTimeForDML,
nextver = wmsys.lt_ctx_pkg.getNextVer(nextver,
614,
version,
'denialletterspoc_onmzpulp',
'CRS_LEAF',
22)
where rowid = WM_rowids(wm_indx)
returning wmsys.lt_ctx_pkg.getCurNextVer bulk collect into WM_nextver;
/* These are the rows that have not yet been resolved after the latest BeginResolve */
forall wm_indx in WM_rowids.first .. WM_rowids.last execute immediate
'begin insert into T2.MCM_MESSAGE_lt(ID,DPS_APPLICATION_ID,TYPE_ID,NAME,PRIVILEGED,CAMPAIGN_ID,TEXT,FILE_NAME,GRAPHIC_WIDTH,GRAPHIC_HEIGHT,DESCRIPTION,ACTIVE,INCLUDE_IN_LIBRARY,MESSAGE_FILTER_ID,OP_USER_ID,OP_WORKSPACE,OP_TIME,version,createtime,retiretime,nextver,delstatus,ltlock)
(select t1.ID,t1.DPS_APPLICATION_ID,t1.TYPE_ID,t1.NAME,t1.PRIVILEGED,t1.CAMPAIGN_ID,t1.TEXT,t1.FILE_NAME,t1.GRAPHIC_WIDTH,t1.GRAPHIC_HEIGHT,t1.DESCRIPTION,t1.ACTIVE,t1.INCLUDE_IN_LIBRARY,t1.MESSAGE_FILTER_ID,t1.OP_USER_ID,t1.OP_WORKSPACE,t1.OP_TIME,614, wmsys.owm_9ip_pkg.activeTimeForDML, null,:1, sign(delstatus)*(abs(delstatus)+1),
wmsys.lt_ctx_pkg.checkngetlock(''C'', t1.ltlock, t1.nextver, ''denialletterspoc_onmzpulp'', 0,
''MODIFY'', t1.version, t1.delstatus, 0, 1)
from T2.MCM_MESSAGE_lt t1
where t1.rowid = :2); end;'
using WM_nextver(wm_indx),
WM_rowids(wm_indx)
end if;
if (WM_found = 1) then
wmsys.lt_ctx_pkg.update_modified_tables('T2',
'MCM_MESSAGE',
614,
'denialletterspoc_onmzpulp',
22);
end if;
if (WM_found = 1) then
forall wm_indx in WM_rowids.first .. WM_rowids.last
delete from T2.MCM_MESSAGE_aux
where (ID) in (select ID
from T2.MCM_MESSAGE_lt
where rowid = WM_rowids(wm_indx))
and childState = 'denialletterspoc_onmzpulp';
end if;
/* now insert new syncing information about these rows */
execute immediate 'insert into T2.MCM_MESSAGE_aux (
select ID,
p.WM_childstate, p.WM_parentstate,
p.WM_childds, 614, p.WM_parentds, p.WM_parentver, ''0'',''CC''
from T2.MCM_MESSAGE_pkc p
where ( id in (8403026,10134822,8259485,8259488,8426289,8426287,10186643,8426288) ) )';
END;
Thanks
Amos

Ora-00604 error and ora 01000 error while report generation.

hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.

Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000:     maximum open cursors exceeded
Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

ORA-00604: error occurred at recursive SQL level 1 and ORA-30036:

Hi Gurus,
I am trying to shrink the table segment along with indexes.
I am using
alter table OWNER.TABLE shrink space cascade; syntax but after 1 hr i got the following error.
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30036: unable to extend segment by 4 in undo tablespace 'UNDOTBS01'
UNDO tablespace has sufficient space and undo_retention is 6Hrs. What could be the problem ?
Or do i need to use
alter table OWNER.TABLE shrink space; only ?
Thanks & Regards

Hi,
I am doing this in testing enviornment and before this activity added 4g space to existing 50GB undo tablespace.
No jobs are running in testing environment and the shrinking on table is of 12GB. I cann't import/export and truncate or move to different tablespaces as this has oracle advanced queue and chances are more to corrupt queues.
Thanks

ORA-00701 error in alterfile and smon trace every 10 seconds

Similar Messages

Maybe you are looking for