ORA-00933: ORA-06512: in "OWBSYS.WB_RTPROFILE_SERVICE

Hi,
I tried to create a profile in OWB 11g. When I run the creation job I get the error "ORA-00933: SQL-Befehl wurde nicht korrekt beendet
ORA-06512: in "OWBSYS.WB_RT_PROFILE_SERVICE", Zeile 164
ORA-06512: in "OWBSYS.WB_RT_PROFILE_SERVICE", Zeile 888
ORA-06512: in Zeile 1"
What did I wrong?
Thank you for your help.
Regards
Siegwin

Does the Oracle database have partitioning enabled? The OWB profiling functionality requires database partitioning.
select * from v$option where PARAMETER like '%Partition%';

Similar Messages

OWB Repository creation failed at the end with ORA-01403 & ORA-06512

I got the below error during the OWB Repository Creation on RAC Database which is newly created(11.2.0.3)
=========================================
java.lang.Exception: The workspace user installation failed on user(s):
owb_cdr:
java.lang.Exception: ORA-01403: no data found
ORA-06512: at "OWBSYS.GETROLESTARTED", line 31
ORA-06512: at line 1
=========================================
I was checking this MOM: OWB Design Client Fails to Connect to Repository With ORA-06512: at "OWBSYS.GETROLESTARTED" (Doc ID 1355764.1)
But why this is happening for first time as this is a Fresh database.
Can anyone help on this??? Any workaround for this issue?

I got the below error during the OWB Repository Creation on RAC Database which is newly created(11.2.0.3)
=========================================
java.lang.Exception: The workspace user installation failed on user(s):
owb_cdr:
java.lang.Exception: ORA-01403: no data found
ORA-06512: at "OWBSYS.GETROLESTARTED", line 31
ORA-06512: at line 1
=========================================
I was checking this MOM: OWB Design Client Fails to Connect to Repository With ORA-06512: at "OWBSYS.GETROLESTARTED" (Doc ID 1355764.1)
But why this is happening for first time as this is a Fresh database.
Can anyone help on this??? Any workaround for this issue?

ORA-00933 - syntax error

SQL> ed
Wrote file afiedt.buf
1 DECLARE
2 sqlStmt VARCHAR2(1000);
3 BEGIN
4 FOR x IN (SELECT * FROM user_tables where table_name like 'T%')
5 LOOP
6 sqlStmt := 'CREATE TABLE ' || x.table_name || '_TEMP ';
7 -- Note the extra concatenation operator
8 sqlStmt := sqlStmt || ' AS ' ;
9 sqlStmt := sqlStmt || ' SELECT * FROM ' || x.table_name||'WHERE integerdate( c3 )
10 < add_months( sysdate, -36 )';
11 dbms_output.put_line( sqlStmt );-- Better to log to a table or log to a file perhaps
12 EXECUTE IMMEDIATE sqlStmt;
13 END LOOP;
14* END;
SQL> /
DECLARE
ERROR at line 1:
ORA-00933: SQL command not properly ended
ORA-06512: at line 12
When I run this script without where clause tghen it runs successfully. Can you please tell me if something is missing or at the wrong place?
thanks in advance.

I tried your code by commenting the execute immediate and it produced the correct statements.
I think you should check the framed statements by inserting them into a log table and see if they are coming as expected.
DECLARE
sqlStmt VARCHAR2(1000);
BEGIN
FOR x IN (SELECT * FROM user_tables where table_name like 'A%')
LOOP
sqlStmt := 'CREATE TABLE ' || x.table_name || '_TEMP ';
-- Note the extra concatenation operator
sqlStmt := sqlStmt || ' AS ' ;
sqlStmt := sqlStmt || ' SELECT * FROM ' || x.table_name||' WHERE integerdate( c3 ) < add_months( sysdate, -36 )';
INSERT INTO ERROR_LOG (LOG) VALUES (sqlstmt);
COMMIT;
dbms_output.put_line( sqlStmt );-- Better to log to a table or log to a file perhaps
--EXECUTE IMMEDIATE sqlStmt;
END LOOP;
END;

PL/SQL function. ORA-00933: SQL command not properly ended

This is my first attempt at pl/sql functions with dynamic sql. It will compile, but when I try to test it I get the ORA-00933 error at line 147. line 147 is OPEN retval FOR report_query;
Please take a look and let me know what it wrong! thanks
{CREATE OR REPLACE FUNCTION TSARPTS.Stats (v_Hub       IN VARCHAR2,
                                          v_type      IN VARCHAR2,
                                          v_subtype   IN VARCHAR2)
   RETURN SYS_REFCURSOR
IS
   retval           SYS_REFCURSOR;
   report_query_a   VARCHAR2 (10000)
                       := '
SELECT hub,
         CASE
            WHEN Total = 0 OR Pass_1st = 0 THEN 0
            ELSE ROUND (Pass_1st / (Total) * 100, 2)
         END
            AS Pass_1st_percent,
         CASE
            WHEN Total = 0 OR Pass_2nd = 0 THEN 0
            ELSE ROUND (Pass_2nd / (Total) * 100, 2)
         END
            AS Pass_2nd_percent,
         CASE
            WHEN Total = 0 OR Pass_3rd = 0 THEN 0
            ELSE ROUND (Pass_3rd / (Total) * 100, 2)
         END
            AS Pass_3rd_percent,
         CASE
            WHEN Total = 0 OR DNM = 0 THEN 0
            ELSE ROUND (DNM / (Total) * 100, 2)
         END
            AS DNM,
         CASE
            WHEN Total = 0 OR Incomplete = 0 THEN 0
            ELSE ROUND (Incomplete / (Total) * 100, 2)
         END
            AS Incomplete
    FROM ( SELECT hub,
                   SUM (DECODE (result, ''Pass_on_1st'', 1, 0)) Pass_1st,
                   SUM (DECODE (result, ''Pass_on_2nd'', 1, 0)) Pass_2nd,
                   SUM (DECODE (result, ''Pass_on_3rd'', 1, 0)) Pass_3rd,
                   SUM (DECODE (result, ''DNM'', 1, 0)) DNM,
                   SUM (DECODE (result, ''INCOMPLETE'', 1, 0)) Incomplete,
                     SUM (DECODE (result, ''Pass_on_1st'', 1, 0))
                   + SUM (DECODE (result, ''Pass_on_2nd'', 1, 0))
                   + SUM (DECODE (result, ''Pass_on_3rd'', 1, 0))
                   + SUM (DECODE (result, ''DNM'', 1, 0))
                   + SUM (DECODE (result, ''INCOMPLETE'', 1, 0))
                      Total
              FROM employees_vw a, pse_vw b
             WHERE     a.emplid = b.emplid
                   AND status IN (''S'', ''I'', ''N'')
                   AND TYPE = ''PSE''
   report_query_b   VARCHAR2 (10000)
                       := '
SELECT hub,
       TYPE,
       subtype,
       CASE
          WHEN Total = 0 OR Pass_1st = 0 THEN 0
          ELSE ROUND (Pass_1st / (Total) * 100, 2)
       END
          AS Pass_1st_percent,
       CASE
          WHEN Total = 0 OR Pass_2nd = 0 THEN 0
          ELSE ROUND (Pass_2nd / (Total) * 100, 2)
       END
          AS Pass_2nd_percent,
       CASE
          WHEN Total = 0 OR Pass_3rd = 0 THEN 0
          ELSE ROUND (Pass_3rd / (Total) * 100, 2)
       END
          AS Pass_3rd_percent,
       CASE
          WHEN Total = 0 OR DNM = 0 THEN 0
          ELSE ROUND (DNM / (Total) * 100, 2)
       END
          AS DNM,
       CASE
          WHEN Total = 0 OR Incomplete = 0 THEN 0
          ELSE ROUND (Incomplete / (Total) * 100, 2)
       END
          AS Incomplete
FROM ( SELECT hub,
   TYPE,
       subtype
                  SUM (DECODE (result, ''Pass_on_1st'', 1, 0)) Pass_1st,
                   SUM (DECODE (result, ''Pass_on_2nd'', 1, 0)) Pass_2nd,
                   SUM (DECODE (result, ''Pass_on_3rd'', 1, 0)) Pass_3rd,
                   SUM (DECODE (result, ''DNM'', 1, 0)) DNM,
                   SUM (DECODE (result, ''INCOMPLETE'', 1, 0)) Incomplete,
                     SUM (DECODE (result, ''Pass_on_1st'', 1, 0))
                   + SUM (DECODE (result, ''Pass_on_2nd'', 1, 0))
                   + SUM (DECODE (result, ''Pass_on_3rd'', 1, 0))
                   + SUM (DECODE (result, ''DNM'', 1, 0))
                   + SUM (DECODE (result, ''INCOMPLETE'', 1, 0))
                      Total
              FROM employees_vw a, pse_vw b
             WHERE     a.emplid = b.emplid
                   AND status IN (''S'', ''I'', ''N'')
                 AND TYPE = ''PSE''
   report_query     VARCHAR2 (10000);
BEGIN
   IF v_hub <> '*'
   THEN
      report_query := report_query_a;
   ELSE
      report_query := report_query_b;
   END IF;
   IF v_hub <> '*'
   THEN
      report_query :=
         report_query || ' and hub = ''' || v_hub || ''' GROUP BY hub )
GROUP BY hub,
         Pass_1st,
         Pass_2nd,
         Pass_3rd,
         Total,
         DNM,
         Incomplete';
   END IF;
   IF v_type <> '*' AND v_subtype <> '*' AND v_hub <> '*'
   THEN
      report_query :=
            report_query
         || ' and hub = '''
         || v_hub
         || ''' and type = '''
         || v_type
         || ''' and subtype= '''
         || v_subtype
         || '''
          GROUP BY hub,
                 TYPE,
                 subtype,
        GROUP BY hub,
                 TYPE,
                 subtype,
                 Pass_1st,
                 Pass_2nd,
                 Pass_3rd,
                 Total,
                 DNM,
                 Incomplete';
   END IF;
   OPEN retval FOR report_query;
   RETURN retval;
END;
Edited by: user10821012 on May 13, 2010 9:56 AM

What you are seeing is pretty common. When I work with dynamic SQL I usually include some logic to put the dyanmic SQL into a string and a means to see what was generated, something like (untested here)
v_sql_c := 'select * from dual';
open refcur for v_sql_c;
exception
when others then
     insert into work_table (clob_column) values (v_sql_c);so I can later query the table to get to the generated SQL for debugging, something like
select * from work_table;I also try to write dynamic SQL so I can paste it from the work table right into query execution without editing.

ORA-00933 - Error in PL/SQL for Form with report.

Hello,
I am getting this error :
failed to parse SQL query:
ORA-00933: SQL command not properly ended
and my PL/SQL function body returning SQL is as follows:
Declare
q varchar2(32767);
w varchar2(4000);
v_total varchar2(10);
Begin
v_total:='TOTAL' ;
q:=' SELECT ASR_DB_CLIENT.CLIENT_NAME, ';
q:=q||' ASR_DB_OIS.ACCT_NAME, ';
q:=q||' ASR_DB_OIS.ACCT_NBR, ';
q:=q||' ASR_DB_OIS.INCEPT_DT, ';
q:=q||' asr_db_prod.MKT_CODE, ';
q:=q||' asr_db_prod.asst_clss, ';
q:=q||' ASR_DB_OIS.PROD_CODE, ';
q:=q||' ASR_DB_OIS.GROUP_CODE, ';
q:=q||' ASR_DB_PLAN.TAX_STAT, ';
q:=q||' asr_db_clnt_type.clnt_type_name, ';
q:=q||' asr_db_plan_type.plan_type_name, ';
q:=q||' ASR_DB_OIS.ACCT_type, ';
q:=q||' ASR_DB_PLAN.CNTRY_CODE, ';
q:=q||' ASR_DB_OIS.DISCRET_FLAG, ';
q:=q||' ASR_DB_OIS.ASST_BAL ';
q:=q||' FROM ASR_DB_OIS, ASR_DB_PLAN, ASR_DB_CLIENT, ASR_DB_PROD, ';
q:=q||' asr_db_plan_type, ';
q:=q||' asr_db_Clnt_type ';
q:=q||' WHERE';
q:=q||' ASR_DB_OIS.PLAN_ID = ASR_DB_PLAN.PLAN_ID and ';
q:=q||' ASR_DB_OIS.as_of_dt = ASR_DB_PLAN.as_of_dt and ';
q:=q||' ASR_DB_PLAN.CLIENT_ID = ASR_DB_CLIENT.CLIENT_ID and ';
q:=q||' ASR_DB_OIS.as_of_dt = ASR_DB_CLIENT.as_of_dt and ';
q:=q||' asr_db_ois.prod_code = asr_db_prod.prod_code and ';
q:=q||' ASR_DB_PLAN.plan_type_code = ASR_DB_PLAN_type.plan_type_code and ';
q:=q||' ASR_DB_Client.clnt_type_code = ASR_DB_clnt_type.clnt_type_code and ';
q:=q||' ASR_DB_OIS.AS_OF_DT = :p99_asofdate ';
IF :P2_ROLLUPSLEEVE = 'RU'
THEN
q :=q||' and ASR_DB_OIS.PARENT_OIS_ID is null ';
Else
q :=q||' and ASR_DB_OIS.ACCT_TYPE like "%"'||v_total||'"%" ';
q :=q||' and ASR_DB_OIS.PARENT_OIS_ID is not null ';
END IF;
return q;
end;
Why this is failing ?
Is "%"'||v_total||'"%" '; incorrect ?
P2_ROLLUPSLEEVE is a radio button.
Please advise....
Thanks,
HM

And
Also, I get the following error when I try few other things like
q :=q||' and ASR_DB_OIS.ACCT_TYPE = '||v_total||' ';
or
q :=q||' and ASR_DB_OIS.ACCT_TYPE = "||v_total||" ';
failed to parse SQL query:
ORA-00904: "TOTAL": invalid identifier
And
ORA-06550: line 43, column 41: PLS-00103: Encountered the symbol "TOTAL" when expecting one of the following: * & = - + ; < / > at in is mod remainder not rem <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ between || member SUBMULTISET_ The symbol "* was inserted before "TOTAL" to continue.
When I try
q :=q||' and ASR_DB_OIS.ACCT_TYPE = "'TOTAL'" ';
Any helpful tips will be much appreciated.
Thanks,
HM

ORA-00933: SQL command not properly ended

I am attempting to create a view in oracle 8.0.6 but get the error message ORA-00933 SQL command not properly ended, can anyone help?:
SQL> create view AJT_SCHEDULES01 as
2 select SCHDL_REFNO, STRAN_REFNO from SCHEDULES order by STRAN_REFNO desc;
select SCHDL_REFNO, STRAN_REFNO from SCHEDULES order by STRAN_REFNO desc
ERROR at line 2:
ORA-00933: SQL command not properly ended

ORDER BY cannot be used to create an ordered view or to insert in a certain order.
Please refer to Section ORA-00933: SQL command not properly ended at : http://otn.oracle.com/doc/server.805/a58312/newch220.htm
For further assistance, please post in the forum at : PL/SQL
Hope this helps
Regards
Pushkala

Adding a field to an sql statement in Oracle Reports error ORA-00933

We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
               p.full_name_lfmi name,
                p.BIRTH_DATE, p.GENDER Sex,
                Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
                a.academic_period TERM,
                CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
                             ELSE ' '
                END AS Program,
                a.COLLEGE, a.degree, a.major, ' ' rule,
                a.STUDENT_POPULATION,a.STUDENT_LEVEL,    a.application_status Status, a.application_status_date app_sts_dte,
                ad.decision_date1 Last_Dec_Date,
                ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
                /* Deposit Date uses the last term entered in :p_term parameter string */
                (SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid)   AS "DEPOSIT DATE",
                ph.phone as PHONE,
                CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
                 ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
                            ELSE ' '
                            END
                END AS FIRST_CONTACT,
                DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
                goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
           MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
           MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
        AND a.curriculum_priority = 1
        AND a.person_uid = ps.person_uid
       AND a.person_uid = ad.person_Uid(+)
       AND a.person_uid = goremal_pidm(+)
       AND a.person_uid = adr.pidm(+)
       AND a.person_uid = ph.pidm(+)
       AND ph.rnum(+) = 1
       AND a.person_uid = c.person_uid(+)
       AND a.academic_period = c.academic_period(+)
&Where_Clause
       /*    TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
        AND NOT(p.id_number = '00000000'   OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
       AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
       AND a.academic_period = ad.academic_period(+)
        AND a.application_number = ad.application_number(+)
        AND a.degree <> 'ND'    /*   AND a.college <> 'LW'                         -- Does not need non-degree and law students    */
       &Cohort_Clause
ORDER BY Program &ORDER_CLAUSE

Hi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all.

Urgent help please. Inner Join caused ora-00933 error

I ran this one , works fine:
SELECT DISTINCT EXP.EXP_ID,
EXP.DATU_EXP_WIRE_CENTER_CLLI,
EXP.DATU_EXP_IP,
EXP.DATU_EXP_CLLI,
EXP.DATU_EXP_PORT,
EXP.DATU_EXP_NAME,
EXP.DATU_EXP_CITY,
EXP.DATU_EXP_STATE,
EXP.DATU_EXP_SW_VERSION,
DECODE(LAST_ALARM.LAST_ALARM_DATE, NULL, TO_CHAR(SYSDATE,'YYYY/MM/DD HH24:MI:SS'),
     TO_CHAR(LAST_ALARM.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS STATUS_DATE,
DECODE(LAST_ALARM.ALARM_NAME, NULL, 'Disconnected', LAST_ALARM.ALARM_NAME) AS DATU_STATUS,
DECODE(LAST_ALARM.ALARM_CLASS, NULL, 'OTHER', LAST_ALARM.ALARM_CLASS) AS IS_ERROR_STATUS,
     DECODE(LAST_RESOURCE.LAST_ALARM_DATE, NULL, '', TO_CHAR(LAST_RESOURCE.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS RESOURCE_STATUS_DATE,
     DECODE(LAST_RESOURCE.RESOURCE_CODE_NAME, NULL, '', LAST_RESOURCE.RESOURCE_CODE_NAME) AS RESOURCE_STATUS,
     DECODE(LAST_RESOURCE.RESOURCE_CODE_CLASS, NULL, '', LAST_RESOURCE.RESOURCE_CODE_CLASS) AS IS_RESOURCE_ERROR_STATUS,
     DECODE(LAST_OPER.LAST_ALARM_DATE, NULL, '', TO_CHAR(LAST_OPER.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS OPER_STATUS_DATE,
     DECODE(LAST_OPER.OPER_CODE_NAME, NULL, '', LAST_OPER.OPER_CODE_NAME) AS OPER_STATUS,
     DECODE(LAST_OPER.OPER_CODE_CLASS, NULL, '', LAST_OPER.OPER_CODE_CLASS) AS IS_OPER_ERROR_STATUS,
EXP.BEGIN_MAINT_WINDOW, RTU.RTU_NAME
FROM TT_DATU_EXP_UNIT_INFO EXP
     left outer join
( SELECT distinct alarmed_datus.EXP_ID, c.ALARM_NAME, c.ALARM_TYPE, c.ALARM_CLASS, alarmed_datus.LAST_ALARM_DATE
FROM ( SELECT EXP_ID, MAX(ALARM_TIME) AS LAST_ALARM_DATE FROM TT_DATU_EXP_ALARM_INFO GROUP BY EXP_ID ) alarmed_datus
inner join TT_DATU_EXP_ALARM_INFO b on b.EXP_ID = alarmed_datus.EXP_ID AND b.ALARM_TIME = alarmed_datus.LAST_ALARM_DATE
inner join TT_DATU_EXP_ALARM_TYPES c on b.ALARM_TYPE = c.ALARM_TYPE
) LAST_ALARM on EXP.EXP_ID = LAST_ALARM.EXP_ID
     left outer join
     ( SELECT distinct a.EXP_ID, c.RESOURCE_CODE_NAME, c.RESOURCE_CODE_TYPE, c.RESOURCE_CODE_CLASS, a.LAST_ALARM_DATE
     FROM ( SELECT EXP_ID, MAX(RESOURCE_CODE_TIME) AS LAST_ALARM_DATE
     FROM TT_DATU_EXP_RESOURCE_CODE_INFO GROUP BY EXP_ID ) a
inner join TT_DATU_EXP_RESOURCE_CODE_INFO b on b.EXP_ID = a.EXP_ID AND b.RESOURCE_CODE_TIME = a.LAST_ALARM_DATE
inner join TT_DATU_EXP_RESOURCECODE_TYPES c on b.RESOURCE_CODE_TYPE = c.RESOURCE_CODE_TYPE
     ) LAST_RESOURCE on EXP.EXP_ID = LAST_RESOURCE.EXP_ID
     left outer join
     ( SELECT distinct a.EXP_ID, c.OPER_CODE_NAME, c.OPER_CODE_TYPE, c.OPER_CODE_CLASS, a.LAST_ALARM_DATE
     FROM ( SELECT EXP_ID, MAX(OPER_CODE_TIME) AS LAST_ALARM_DATE
     FROM TT_DATU_EXP_OPER_CODE_INFO GROUP BY EXP_ID ) a
inner join TT_DATU_EXP_OPER_CODE_INFO b on b.EXP_ID = a.EXP_ID AND b.OPER_CODE_TIME = a.LAST_ALARM_DATE
inner join TT_DATU_EXP_OPER_CODE_TYPES c on b.OPER_CODE_TYPE = c.OPER_CODE_TYPE) LAST_OPER on EXP.EXP_ID = LAST_OPER.EXP_ID
inner join TT_DATU_LRN_MAP LRNS on EXP.EXP_ID = LRNS.EXP_ID AND TRIM(LRNS.LRN) LIKE p_LRN
inner join TT_RTU_TYPES RTU ON EXP.RTU_TYPE_ID = RTU.RTU_TYPE_ID
WHERE NOT EXISTS (SELECT SATELLITE_EXP_ID FROM TT_HOST_SATELLITE WHERE EXP.EXP_ID = SATELLITE_EXP_ID)
AND EXP.IS_PRIMARY_ADDRESS LIKE p_isPrimary;
     ELSE
     OPEN v_cursor FOR
SELECT EXP.EXP_ID,
EXP.DATU_EXP_WIRE_CENTER_CLLI,
EXP.DATU_EXP_IP,
EXP.DATU_EXP_CLLI,
EXP.DATU_EXP_PORT,
EXP.DATU_EXP_NAME,
EXP.DATU_EXP_CITY,
EXP.DATU_EXP_STATE,
EXP.DATU_EXP_SW_VERSION,
DECODE(LAST_ALARM.LAST_ALARM_DATE, NULL, TO_CHAR(SYSDATE,'YYYY/MM/DD HH24:MI:SS'), TO_CHAR(LAST_ALARM.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS STATUS_DATE,
DECODE(LAST_ALARM.ALARM_NAME, NULL, 'Disconnected', LAST_ALARM.ALARM_NAME) AS DATU_STATUS,
DECODE(LAST_ALARM.ALARM_CLASS, NULL, 'OTHER', LAST_ALARM.ALARM_CLASS) AS IS_ERROR_STATUS,
     DECODE(LAST_RESOURCE.LAST_ALARM_DATE, NULL, '', TO_CHAR(LAST_RESOURCE.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS RESOURCE_STATUS_DATE,
     DECODE(LAST_RESOURCE.RESOURCE_CODE_NAME, NULL, '', LAST_RESOURCE.RESOURCE_CODE_NAME) AS RESOURCE_STATUS,
     DECODE(LAST_RESOURCE.RESOURCE_CODE_CLASS, NULL, '', LAST_RESOURCE.RESOURCE_CODE_CLASS) AS IS_RESOURCE_ERROR_STATUS,
     DECODE(LAST_OPER.LAST_ALARM_DATE, NULL, '', TO_CHAR(LAST_OPER.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS OPER_STATUS_DATE,
     DECODE(LAST_OPER.OPER_CODE_NAME, NULL, '', LAST_OPER.OPER_CODE_NAME) AS OPER_STATUS,
     DECODE(LAST_OPER.OPER_CODE_CLASS, NULL, '', LAST_OPER.OPER_CODE_CLASS) AS IS_OPER_ERROR_STATUS,
EXP.BEGIN_MAINT_WINDOW, RTU.RTU_NAME
FROM TT_DATU_EXP_UNIT_INFO EXP
     left outer join (
SELECT distinct alarmed_datus.EXP_ID, c.ALARM_NAME, c.ALARM_TYPE, c.ALARM_CLASS, alarmed_datus.LAST_ALARM_DATE
FROM (SELECT EXP_ID, MAX(ALARM_TIME) AS LAST_ALARM_DATE FROM TT_DATU_EXP_ALARM_INFO GROUP BY EXP_ID ) alarmed_datus
     inner join TT_DATU_EXP_ALARM_INFO b on b.EXP_ID = alarmed_datus.EXP_ID AND b.ALARM_TIME = alarmed_datus.LAST_ALARM_DATE
     inner join TT_DATU_EXP_ALARM_TYPES c on b.ALARM_TYPE = c.ALARM_TYPE )
     LAST_ALARM on EXP.EXP_ID = LAST_ALARM.EXP_ID
     left outer join
          ( SELECT distinct a.EXP_ID, c.RESOURCE_CODE_NAME, c.RESOURCE_CODE_TYPE, c.RESOURCE_CODE_CLASS, a.LAST_ALARM_DATE
          FROM ( SELECT EXP_ID, MAX(RESOURCE_CODE_TIME) AS LAST_ALARM_DATE
          FROM TT_DATU_EXP_RESOURCE_CODE_INFO GROUP BY EXP_ID ) a
     inner join TT_DATU_EXP_RESOURCE_CODE_INFO b on b.EXP_ID = a.EXP_ID AND b.RESOURCE_CODE_TIME = a.LAST_ALARM_DATE
     inner join TT_DATU_EXP_RESOURCECODE_TYPES c on b.RESOURCE_CODE_TYPE = c.RESOURCE_CODE_TYPE) LAST_RESOURCE on EXP.EXP_ID = LAST_RESOURCE.EXP_ID
     left outer join
          ( SELECT distinct a.EXP_ID, c.OPER_CODE_NAME, c.OPER_CODE_TYPE, c.OPER_CODE_CLASS, a.LAST_ALARM_DATE
          FROM ( SELECT EXP_ID, MAX(OPER_CODE_TIME) AS LAST_ALARM_DATE
          FROM TT_DATU_EXP_OPER_CODE_INFO GROUP BY EXP_ID ) a
     inner join TT_DATU_EXP_OPER_CODE_INFO b on b.EXP_ID = a.EXP_ID AND b.OPER_CODE_TIME = a.LAST_ALARM_DATE
     inner join TT_DATU_EXP_OPER_CODE_TYPES c on b.OPER_CODE_TYPE = c.OPER_CODE_TYPE
          ) LAST_OPER on EXP.EXP_ID = LAST_OPER.EXP_ID ORDER BY EXP.DATU_EXP_CLLI
     inner join TT_RTU_TYPES RTU ON EXP.RTU_TYPE_ID = RTU.RTU_TYPE_ID
WHERE NOT EXISTS (SELECT SATELLITE_EXP_ID FROM TT_HOST_SATELLITE WHERE EXP.EXP_ID = SATELLITE_EXP_ID) AND EXP.IS_PRIMARY_ADDRESS like
p_isPrimary;
However this one:
SELECT EXP.EXP_ID,
EXP.DATU_EXP_WIRE_CENTER_CLLI,
EXP.DATU_EXP_IP,
EXP.DATU_EXP_CLLI,
EXP.DATU_EXP_PORT,
EXP.DATU_EXP_NAME,
EXP.DATU_EXP_CITY,
EXP.DATU_EXP_STATE,
EXP.DATU_EXP_SW_VERSION,
DECODE(LAST_ALARM.LAST_ALARM_DATE, NULL, TO_CHAR(SYSDATE,'YYYY/MM/DD HH24:MI:SS'),
     TO_CHAR(LAST_ALARM.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS STATUS_DATE,
DECODE(LAST_ALARM.ALARM_NAME, NULL, 'Disconnected', LAST_ALARM.ALARM_NAME) AS DATU_STATUS,
DECODE(LAST_ALARM.ALARM_CLASS, NULL, 'OTHER', LAST_ALARM.ALARM_CLASS) AS IS_ERROR_STATUS,
     DECODE(LAST_RESOURCE.LAST_ALARM_DATE, NULL, '', TO_CHAR(LAST_RESOURCE.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS RESOURCE_STATUS_DATE,
     DECODE(LAST_RESOURCE.RESOURCE_CODE_NAME, NULL, '', LAST_RESOURCE.RESOURCE_CODE_NAME) AS RESOURCE_STATUS,
     DECODE(LAST_RESOURCE.RESOURCE_CODE_CLASS, NULL, '', LAST_RESOURCE.RESOURCE_CODE_CLASS) AS IS_RESOURCE_ERROR_STATUS,
     DECODE(LAST_OPER.LAST_ALARM_DATE, NULL, '', TO_CHAR(LAST_OPER.LAST_ALARM_DATE,'YYYY/MM/DD HH24:MI:SS')) AS OPER_STATUS_DATE,
     DECODE(LAST_OPER.OPER_CODE_NAME, NULL, '', LAST_OPER.OPER_CODE_NAME) AS OPER_STATUS,
     DECODE(LAST_OPER.OPER_CODE_CLASS, NULL, '', LAST_OPER.OPER_CODE_CLASS) AS IS_OPER_ERROR_STATUS,
EXP.BEGIN_MAINT_WINDOW, RTU.RTU_NAME
FROM TT_DATU_EXP_UNIT_INFO EXP
     left outer join
SELECT distinct alarmed_datus.EXP_ID, c.ALARM_NAME, c.ALARM_TYPE, c.ALARM_CLASS, alarmed_datus.LAST_ALARM_DATE
FROM ( SELECT EXP_ID, MAX(ALARM_TIME) AS LAST_ALARM_DATE FROM TT_DATU_EXP_ALARM_INFO GROUP BY EXP_ID) alarmed_datus
     inner join TT_DATU_EXP_ALARM_INFO b on b.EXP_ID = alarmed_datus.EXP_ID AND b.ALARM_TIME = alarmed_datus.LAST_ALARM_DATE
     inner join TT_DATU_EXP_ALARM_TYPES c on b.ALARM_TYPE = c.ALARM_TYPE ) LAST_ALARM on EXP.EXP_ID = LAST_ALARM.EXP_ID
     left outer join
          ( SELECT distinct a.EXP_ID, c.RESOURCE_CODE_NAME, c.RESOURCE_CODE_TYPE, c.RESOURCE_CODE_CLASS, a.LAST_ALARM_DATE
          FROM ( SELECT EXP_ID, MAX(RESOURCE_CODE_TIME) AS LAST_ALARM_DATE
          FROM TT_DATU_EXP_RESOURCE_CODE_INFO GROUP BY EXP_ID ) a
     inner join TT_DATU_EXP_RESOURCE_CODE_INFO b on b.EXP_ID = a.EXP_ID AND b.RESOURCE_CODE_TIME = a.LAST_ALARM_DATE
     inner join TT_DATU_EXP_RESOURCECODE_TYPES c on b.RESOURCE_CODE_TYPE = c.RESOURCE_CODE_TYPE) LAST_RESOURCE on EXP.EXP_ID = LAST_RESOURCE.EXP_ID
     left outer join
          ( SELECT distinct a.EXP_ID, c.OPER_CODE_NAME, c.OPER_CODE_TYPE, c.OPER_CODE_CLASS, a.LAST_ALARM_DATE
          FROM ( SELECT EXP_ID, MAX(OPER_CODE_TIME) AS LAST_ALARM_DATE
          FROM TT_DATU_EXP_OPER_CODE_INFO GROUP BY EXP_ID ) a
     inner join TT_DATU_EXP_OPER_CODE_INFO b on b.EXP_ID = a.EXP_ID AND b.OPER_CODE_TIME = a.LAST_ALARM_DATE
     inner join TT_DATU_EXP_OPER_CODE_TYPES c on b.OPER_CODE_TYPE = c.OPER_CODE_TYPE
          ) LAST_OPER on EXP.EXP_ID = LAST_OPER.EXP_ID ORDER BY EXP.DATU_EXP_CLLI
inner join TT_RTU_TYPES RTU ON EXP.RTU_TYPE_ID = RTU.RTU_TYPE_ID
WHERE EXP.IS_PRIMARY_ADDRESS like p_isPrimary;
this one not work kept giving me errors:
[ ORA-00933: SQL command not properly ended
Any guru can help? I need to have this resolved end of today.
Thanks in advance.

Hi,
Never write, let alone post, unformatted code.
Indent the code so that it's easy to set the scope of sub-queries, and the majoc clauses (SELECT, FROM, WHERE, ORDER BY, ...) in each.
When posting any formatted text on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
If you do that to the code you posted, you'll see that it ends like this:... inner join     TT_DATU_EXP_OPER_CODE_INFO     b on b.EXP_ID     = a.EXP_ID
                                   AND      b.OPER_CODE_TIME = a.LAST_ALARM_DATE
     inner join      TT_DATU_EXP_OPER_CODE_TYPES      c on      b.OPER_CODE_TYPE = c.OPER_CODE_TYPE
     ) LAST_OPER          on EXP.EXP_ID = LAST_OPER.EXP_ID
ORDER BY EXP.DATU_EXP_CLLI
inner join TT_RTU_TYPES RTU     ON EXP.RTU_TYPE_ID = RTU.RTU_TYPE_ID
WHERE EXP.IS_PRIMARY_ADDRESS      like p_isPrimary
You can't put an ORDER BY clause in the middle of the FROM clause.
The ORDER BY clause always goes after the WHERE clause, like this:... inner join     TT_DATU_EXP_OPER_CODE_INFO     b on b.EXP_ID     = a.EXP_ID
                                   AND      b.OPER_CODE_TIME = a.LAST_ALARM_DATE
     inner join      TT_DATU_EXP_OPER_CODE_TYPES      c on      b.OPER_CODE_TYPE = c.OPER_CODE_TYPE
     ) LAST_OPER          on EXP.EXP_ID = LAST_OPER.EXP_ID
inner join TT_RTU_TYPES RTU     ON EXP.RTU_TYPE_ID = RTU.RTU_TYPE_ID
WHERE EXP.IS_PRIMARY_ADDRESS      like p_isPrimary
ORDER BY EXP.DATU_EXP_CLLI

ORA-20006: ORA-01722: invalid number ORA-06512: at "APPS.WF_NOTIFICATION"

Hi,
I am having a wft program, which checks a function activity and depending on the value returned sends difference notifications.
The package body completed successfully from backend and while running the workflow program it sends a notification also. But while opening the notification it gives the following error,
ORA-20006: ORA-01722: invalid number ORA-06512: at "APPS.WF_NOTIFICATION", line 5328 ORA-06512: at line 5
I have 3 procedures in my package body and all the 3 procedures have exceptions defined as follows, if they are using any workflow activities.
==========================================================
EXCEPTION
     WHEN OTHERS THEN
          WF_CORE.context (
          'WFCustCheck',
          'MisCustDataFromTableDoc',
          document_id,
          display_type,
          document,
          document_type,
          SQLERRM
RAISE_APPLICATION_ERROR (-20006, SQLERRM);
==========================================================
But I am not able to figure out what is causing this error. What does this "line 5328 ORA-06512: at line 5" in the error message indicate?. My package body has only 600 lines. And why is the error message not displaying the procedure name? though I have defined the procedure name in the exception.
What is the best way to get the procedure name in the error message? So that it becomes easier for identifying which procedure is causing the erro?
Please let me know.
Thanks

Hi,
Instead of the RAISE_APPLICATION_ERROR command, just replace that with RAISE;
The error is coming out of the package that is sending the notification (WF_NOTIFICATION), which is invoked when you open the notification. I'm guessing that line 5 is the line in your code though.
Are you using documents to send the notification, or are they purely defined in the .wft file?
Matt
Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
http://www.workflowfaq.com
http://forum.workflowfaq.com
NEW! - WorkflowFAQ Blog at http://thoughts.workflowfaq.com

Errors ORA-01747 / ORA-00933 ???

I'm running Oracle 8i on win98.
When I try to update numbers in a NUMBER(7,3) column with values like 18,48 I get this errormessage:
ORA-01747: invalid user.table.column-, table.column- or columnspecification
If I enter numbers without decimals in the same column, I get this error-message:
ORA-00933: SQL-command incorrectly terminated.
(both messages are translated from danish)
What is wrong ?
Jesper

all that means..is
ora-01747
A column name was specified improperly in the current SQL statement
ORA-00933: SQL command not properly ended
Cause: The SQL statement ends with an inappropriate clause. For example, an ORDER BY clause may have been included in a CREATE VIEW or INSERT statement.
ORDER BY cannot be used to create an ordered view or to insert in a certain order. Also, an improper SQL ending occurs if IN clause is used with only one argument (IN(X),
for example). An IN clause must have two or more arguments.
Action: Correct the syntax by removing the inappropriate clauses. It may be possible to duplicate the removed clause with another SQL statement. For example, to order the
rows of a view, do so when querying the view and not when creating it. This error can also occur in SQL*Forms applications if a continuation line is indented. Check for
indented lines and delete these spaces.
these are pretty typicall errors...
hope this helps
[email protected]

Java.sql.SQLException: ORA-00933: error when executing query

Hello,
I am trying to execute the following query from a jsp page.
String sqlUpdate ="UPDATE table_name SET name ='"+name+"', description='"+description+"', proj_link='" projlink"', active='" active"',sort_order='" order"',image='" image"',category='" category"', technology='" technology "' WHERE id="+id+" ";
stmt.executeQuery(sqlUpdate);
I get the follwoing error java.sql.SQLException: ORA-00933: SQL command not properly ended
When I omit "description" from the query it executes fine. But when I place it back into the query I get the above error. The table is in Oracle database and the datatype of description id varchar2(4000). I declared all the variables used in the query, I then assigned values caught from the form and then am trying to update the form varibles in the table.
Thanks,
Nikky128

Nikky128 wrote:
Hello,
I am trying to execute the following query from a jsp page.There's a big part of your problem. You shouldn't be doing database stuff in JSPs. If you must, you should be using JSTL and its <sql> tags.
String sqlUpdate ="UPDATE table_name SET name ='"+name+"', description='"+description+"', proj_link='" projlink"', active='" active"',sort_order='" order"',image='" image"',category='" category"', technology='" technology "' WHERE id="+id+" ";Not using PreparedStatement here is just a silly noob error.
When I omit "description" from the query it executes fine. But when I place it back into the query I get the above error. The table is in Oracle database and the datatype of description id varchar2(4000). I declared all the variables used in the query, I then assigned values caught from the form and then am trying to update the form varibles in the table.Probably a single or double quote that you can't see. PreparedStatement will eliminate that problem.
%

Does INNER JOIN work with Oracle 8i ? (ORA-00933)

hi,
I try to execute the sql:
SELECT
A0.FULL_NAME,A0.MANAGER_ID,A0.DEPT_NO,A0.TOP_DEPT
FROM
HR_ORG A0
INNER JOIN
HR_EMP A1
ON
A0.MANAGER_ID=A1.EMP_NO
WHERE
A1.NAME = 'michael'
but I caught an exception:
java.sql.SQLException: ORA-00933: SQL...(message in
chinese)
Does INNER JOIN work with Oracle 8i ?
thanks.

INNER JOIN syntax is introduced in 9i, it does not exists in 8i. You can rewrite your statement:
SELECT
A0.FULL_NAME,A0.MANAGER_ID,A0.DEPT_NO,A0.TOP_DEPT
FROM
HR_ORG A0
, HR_EMP A1
WHERE
A0.MANAGER_ID=A1.EMP_NO
AND
A1.NAME = 'michael'

Sql error- ORA-00933

Hai all,
11.2.2 on solaris 10
UPDATE MED_SECURITY_PRICES
SET s.change_price = ((w.Prev/10)-(w.Last/10))
,s.wa_price = ((w.AMT/(w.VOL*100))*1000) -- (DailyValue/DailyVolume)*1000
From MED_SECURITY_PRICES s JOIN stg_ws.DAILYSTKQUOTATIONDATA w
ON MED_SECURITY_PRICES.SECURITY_CD = med_ws.DAILYSTKQUOTATIONDATA.STK
AND MED_SECURITY_PRICES.AS_OF_DATE = med_ws.DAILYSTKQUOTATIONDATA.CLOSINGDATE
WHERE s.INSTRUMENT_CD = 'EQTY'
AND s.SOURCE_SYS = 'MEDT';
ORA-00933: SQL command not properly ended

KaiS wrote:
Hai all,
11.2.2 on solaris 10
UPDATE MED_SECURITY_PRICES
SET s.change_price = ((w.Prev/10)-(w.Last/10))
,s.wa_price = ((w.AMT/(w.VOL*100))*1000) -- (DailyValue/DailyVolume)*1000
From MED_SECURITY_PRICES s JOIN stg_ws.DAILYSTKQUOTATIONDATA w
ON MED_SECURITY_PRICES.SECURITY_CD = med_ws.DAILYSTKQUOTATIONDATA.STK
AND MED_SECURITY_PRICES.AS_OF_DATE = med_ws.DAILYSTKQUOTATIONDATA.CLOSINGDATE
WHERE s.INSTRUMENT_CD = 'EQTY'
AND s.SOURCE_SYS = 'MEDT';
ORA-00933: SQL command not properly endedThat's not how update statements work in Oracle.
http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_10008.htm#SQLRF01708
Will get you started on the proper syntax.
It looks like (can't really tell since all you posted was a non-working sql statement, i have no idea what your tables or their cardinalities are) you may need to update a join, or use a MERGE statement.
Here's an example of updating a join
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:288016031632
The MERGE statement should be easily found through a google search (there are tonnes of examples out there).
Cheers,

KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE

제품 : FIN_AP
작성날짜 : 2002-12-02
KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE
===================================================================
PURPOSE
Multi-Org 환경속에서 Kr Tax Localization Report 실행시의 ORA-20000, ORA-06512 Error Message 를 해결한다.
Problem Description
Kr Tax Localization의 Reports가 Error를 발생하고, View Log를 통해 확인한 Message가 다음과 같을 경우
ORA-20000: APP-00001: Unable to find message:
AR_NO_ROW_IN_SYSTEM_PARAMETERS
ORA-06512: "APPS.ARP_STANDARD", 줄 999에서
ORA-06512: "APPS.ARP_STANDARD", 줄 2246에서
ORA-06512: "APPS.ARP_UTIL", 줄 29에서
ORA-06512: "APPS.ARP_UTIL_TAX", 줄 111에서
ORA-06512: "APPS.ARP_TAX_EXTRACT", 줄 6178에서
ORA-06512: 줄 1에서
Workaround
Solution Description
1) fnd_client_info.set_org_context(<org_id>);
or
2) v_org_id varchar2(10);
v_org_id := fnd_profile.value('ORG_ID');
fnd_client_info.set_org_context(v_org_id);
.rdf 의 경우 : Before Report Trigger 에 추가
.sql (Package Body, Procedure) 의 경우 : 각 Begin 절 이후
Reference Documents
-------------------

제품 : FIN_AP
작성날짜 : 2002-12-02
KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE
===================================================================
PURPOSE
Multi-Org 환경속에서 Kr Tax Localization Report 실행시의 ORA-20000, ORA-06512 Error Message 를 해결한다.
Problem Description
Kr Tax Localization의 Reports가 Error를 발생하고, View Log를 통해 확인한 Message가 다음과 같을 경우
ORA-20000: APP-00001: Unable to find message:
AR_NO_ROW_IN_SYSTEM_PARAMETERS
ORA-06512: "APPS.ARP_STANDARD", 줄 999에서
ORA-06512: "APPS.ARP_STANDARD", 줄 2246에서
ORA-06512: "APPS.ARP_UTIL", 줄 29에서
ORA-06512: "APPS.ARP_UTIL_TAX", 줄 111에서
ORA-06512: "APPS.ARP_TAX_EXTRACT", 줄 6178에서
ORA-06512: 줄 1에서
Workaround
Solution Description
1) fnd_client_info.set_org_context(<org_id>);
or
2) v_org_id varchar2(10);
v_org_id := fnd_profile.value('ORG_ID');
fnd_client_info.set_org_context(v_org_id);
.rdf 의 경우 : Before Report Trigger 에 추가
.sql (Package Body, Procedure) 의 경우 : 각 Begin 절 이후
Reference Documents
-------------------

Querying unquoted french decimal numeric values results in ORA-00933

using a french (VPC) windows XP Platform,
a french installation of the oracle database
where the locale setting are set to french,
from the clients options regionales settings, the Nobre format is set to: 123 456 789,00
the NLS_Numeric_Characters for both NLS_session_parameters and NLS_database_parameters are set to ','
when using sqlplus on the french hosts system, I find the following
select <col> from <table> where <numbercol> = 1.1
Returns a correct value
select <col> from <table> where <numbercol> = '1,1'
Returns a correct value
select <col> from <table> where <numbercol> = 1,1
returns the query error: ORA-00933: la commande SQL ne se termine pas correctement
Is this correct, are French decimal numbers always in quotes when used in a query ?

Perhaps this
SQL> alter session set nls_numeric_characters=',.' ;
Session altered.
SQL> select * from ( select level /2 n from dual connect by level < 10) ;
         N
        ,5
         1
       1,5
         2
       2,5
         3
       3,5
         4
       4,5
9 rows selected.
SQL> select * from ( select level /2 n from dual connect by level < 10) where n= '1,5' ;
         N
       1,5
SQL> select * from ( select level /2 n from dual connect by level < 10) where n= cast ( '1,5' as number) ;
         N
       1,5
-- // Cannot use , for number you will have to use it as char or convert to number as in above
SQL> select * from ( select level /2 n from dual connect by level < 10) where n= 1,5
2 /
select * from ( select level /2 n from dual connect by level < 10) where n= 1,5
ERROR at line 1:
ORA-00933: SQL command not properly endedHTH
SS

ORA-00933: ORA-06512: in "OWBSYS.WB_RTPROFILE_SERVICE

Similar Messages

Maybe you are looking for