ORA-00942: the table or view does not exist

Hello!!!!
I have tree simple mappings each one with only one dimention and sometimes external or normal tables. One of them is ok but I can´t deploy the others.
In Controle Center I have this messege: the table or view does not exist.
I genereted both queries and run in SQL navigator with the same message.
I realized that I can set the schema properties for external tables but I couldn´t do the same for Dimension (or I don´t know where I can do this).
I believe that I have to set this propertie for dimension to have my mapping running ok, but I realized that the only one mapping that is ok does not have this propertie set.
Where is the problem?!!?!?!?
I validated these mapping and they have warnnings about column length, no errors.
In the previous OWB version I used to set this propertie, but in 10.2 I don´t know if is realy necessary.

Try to open the package body with a tool like TOAD and try to compile it. When you use TOAD the process stops where the error is. Then you know which table or view doesn't exist for the OWB. If the table or view does exist then it is almost certainly a missing privilege that prevents you from succesfully deploying your mapping. If the table or view does not exist then you've got to deploy the underlying (bound) table.
Regards,
Jörg

Similar Messages

  • APEX_APPLICATION_FILES: ORA-00942: table or view does not exist

    Hello,
    As my first APEX task I am attempting the upload/download demo on http://download.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32469/up_dn_files.htm
    The ultimate goal is to store PDF files in the database.
    In order to complete step 1: To create an application using the Create Application Wizard:
    - I first created a user from SYSTEM called 'myapp'
    - Next I logged into 'myapp' to continue the exercise. (I am wondering if that is where I am going wrong... If so, please clarify)
    - Knowing that I would want to save the upload to a table I created a table with a BLOB
    I did the steps for the upload and ran the application - no errors to there.
    Next I needed to "To create a report on APEX_APPLICATION_FILES:".
    I started the wizard as instructed. When I pasted the SELECT ... FROM APEX_APPLICATION_FILES, I got the table or view does not exist. A quick review of the TABLES tab shows only the tables that I created. Not any of the system tables or views.
    I logged back in as SYSTEM and reviewed the 'rights' given the user 'myapp'. All were checked.
    I knew nothing of Oracle when I installed XE, so I took defaults or whatever the install doc said to do. Is that part of the problem? It is clear that I do not have rights to see that table, but I also do not see the table when logged in as SYSTEM.
    Any insight appreciated,
    Rick

    Thanks for the reply.
    Version is:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Database      
    NAME     XE
    CREATED     10/13/2006 08:04:21 PM
    RESETLOGS_TIME     10/13/2006 08:04:25 PM
    Install Version 10.2.1015
    Regarding the code links, this one looks like what I need:
    DECLARE
    l_bfile BFILE;
    l_blob BLOB;
    BEGIN
    INSERT INTO tab1 (col1)
    VALUES (empty_blob())
    RETURN col1 INTO l_blob;
    l_bfile := BFILENAME('IMAGES', 'MyImage.gif');
    DBMS_LOB.fileopen(l_bfile, Dbms_Lob.File_Readonly);
    DBMS_LOB.loadfromfile(l_blob, l_bfile, DBMS_LOB.getlength(l_bfile));
    DBMS_LOB.fileclose(l_bfile);
    COMMIT;
    END;
    Is the 'BFILENAME' function that causes the 'get a filename' dialog box of Windows to open for the user to find which file to upload?
    I'm going off to look for a newer version of APEX, thanks.

  • Table or view does not exist when using in PL/SQL block

    I hav something strange...
    When i execute a query it works just fine... When i use the exact same query in a function i want to create, i get the error 'table or view does not exist'
    I create the function with the same user then when i'm executing the query.
    For example:
    select name,userid from portal.WWLOG_ACTIVITY_LOGS
    if i execute this... it works fine. I get my results.
    However when i create a function:
    CREATE OR REPLACE FUNCTION EBUSINESS.GET_USER_CREATOR (p_userid IN Varchar2) return VARCHAR2
    as
    /*CURSOR c_user_creator IS
    select distinct name,userid from portal.WWLOG_ACTIVITY_LOGS
    where sub_domain = 'user' and action = 'create'
    and name = p_userid;*/
    v_creator varchar2(500);
    v_ret_val VARCHAR2(500) := 'NOT_FOUND';
    BEGIN
    select userid into v_ret_val from portal.WWLOG_ACTIVITY_LOGS
    where sub_domain = 'user' and action = 'create'
    and name = p_userid;
    --v_ret_val := x.userid;
    --end loop;
    -- Is the user in the group or not?
    /*OPEN c_user_creator;
    FETCH c_user_creator INTO v_creator;
    IF c_user_creator%FOUND THEN
    v_ret_val := v_creator;
    ELSE
    v_ret_val := 'NOT FOUND';
    END IF;
    CLOSE c_user_creator;*/
    Return v_ret_val;
    END;
    The table or view does not exist...
    I tryed with cursor, select into, for x in (select....)
    Nothing works.
    A select grant is a select grant right? Are there different grant you should use so you can select it into a function or just do a normal select?
    I also tryed to create a view that just sais select * from WWLOG_ACTIVITY_LOGS but that doesn't work...

    Are there different grant you should use so you can
    select it into a function or just do a normal select? Yes. Grants on objects used in functions/procedures must be given directly to the user, and not through a role.

  • ORA-00942: table or view does not exist

    select
                        nvl(appr.APPROVER_NAME, org.APPROVER_NAME) as APPROVER_NAME,
                        nvl(appr.APPROVER, org.APPROVER) as APPROVER,
                        nvl(appr.APPROVER_TYPE, org.APPROVER_TYPE) as APPROVER_TYPE,
                        nvl(appr.ASSIGNED_DATE, org.ASSIGNED_DATE) as ASSIGNED_DATE,
                        nvl(appr.APPROVAL_DATE, '-') as APPROVAL_DATE,
                        nvl(appr.STATE, org.STATE) as STATE,
                                    org.SEQ as numberoftimesmodified,
                        nvl(appr.PROCESS, org.PROCESS) as PROCESS,
                        appr.seq2
                        from (
                             select a.seq,
                             b.usr_display_name as APPROVER_NAME,
                             b.usr_login as APPROVER,
                             'User' as APPROVER_TYPE,
                             '-' as ASSIGNED_DATE,
                             '-' as STATE,
                             a.seq as numberoftimesmodified,
                             '-' as PROCESS
                             from(
                                  SELECT 1 as seq, USR_UDF_MANAGER_LOGIN as GID, '' as approver_name, 'user' as approver_type FROM DEVT_OIM.USR WHERE USR_LOGIN =:BENEFICIARY_GID AND :APPLICATION = 'Oracle 11i On demand'
                                  UNION
                                  select rownum as seq, regexp_substr(:APPROVERPAYLOAD,'[^,]+', 1, level) as gid, '' as approver_name, 'user' as approver_type from dual
                                  where :APPLICATION != 'Oracle 11i On demand'
                                  connect by regexp_substr(:APPROVERPAYLOAD, '[^,]+', 1, level) is not null
                             ) a
                             inner join DEVT_OIM.usr b on a.gid = b.usr_login
                        ) org
                        left join(
                             select b.numberoftimesmodified as seq, rownum as seq2, a.*
                             from
                                  select
                                  LEAD(a.ASSIGNEES) OVER(ORDER BY a.numberoftimesmodified) as prev_gid,
                                  LEAD(a.pushbacksequence) OVER(ORDER BY a.numberoftimesmodified) as prev_pushbacksequence,
                                  a.ASSIGNEES as current_gid,
                                  nvl(retrieveGidName(a.ASSIGNEES), '-') as APPROVER_NAME, 
                                  (DEVT_OIM.TOKNEW(REPLACE(a.ASSIGNEES, ',', ':'))) as APPROVER,
                                  'User' as APPROVER_TYPE,
                                  a.pushbacksequence,
                                  TO_CHAR(a.assigneddate,'DD-Mon-YYYY HH:MI:SS AM') as ASSIGNED_DATE,
                                  case when a.state = 'WITHDRAWN' then TO_CHAR(a.updateddate,'DD-Mon-YYYY HH:MI:SS AM') else TO_CHAR(d.updateddate,'DD-Mon-YYYY HH:MI:SS AM') end as APPROVAL_DATE,
                                  a.numberoftimesmodified,
                                  case when a.state = 'EXPIRED' then 'Expired' when a.approvalduration is null then 'Pending' when  a.outcome = 'REJECT' then 'Rejected' else 'Approved' end as PROCESS,
                                  d.state as process2,
                                  case when d.substate = 'REASSIGNED' then 'Reassigned' when d.state = 'INFO_REQUESTED' then 'Request Info' when a.state = 'EXPIRED' then 'Expired'
                                       when  a.outcome = 'REJECT' then 'Rejected' when d.substate = 'INFO_SUBMITTED' then 'Submitted' when a.state = 'WITHDRAWN' then 'Withdrawn' when e.state is null then 'Pending' else 'Approved' end as state,
                                  e.ASSIGNEES, d.substate
                                  from WFTASKHISTORY a
                                  left join WFTASKHISTORY d on d.IDENTIFICATIONKEY = a.IDENTIFICATIONKEY and d.numberoftimesmodified = (a.numberoftimesmodified+1)
                                  left join WFTASKHISTORY e on e.IDENTIFICATIONKEY = a.IDENTIFICATIONKEY and e.numberoftimesmodified = (a.numberoftimesmodified-1) and e.ASSIGNEES = a.ASSIGNEES
                                  where a.IDENTIFICATIONKEY = :IDENTIFICATIONKEY and a.state is not null
                                  order by a.numberoftimesmodified
                             ) a
                             inner join (select rownum as numberoftimesmodified, pushbacksequence from (select distinct pushbacksequence from WFTASKHISTORY a where a.IDENTIFICATIONKEY = :IDENTIFICATIONKEY order by pushbacksequence)) b
                             on b.pushbacksequence = a.pushbacksequence
                             where a.prev_gid != a.current_gid or prev_gid is null
                             order by a.numberoftimesmodified
                        ) appr on org.seq = appr.seqORA-00942: table or view does not exist
    00942. 00000 - "table or view does not exist"
    *Cause:   
    *Action:
    Error at Line: 55 Column: 172

    Hi User,
    The ORA - 00942 indicates that the Underlying object is not present in the Database.
    Just Check whether the Table you are used in the Select statement exists in the user/Schema.
    To check this..
    SELECT *
      FROM USER_TABLES
    WHERE TABLE_NAME = 'YOUR_TABLE_NAME';Or
    Simply,
    SELECT *
      FROM TAB;If you are using the Table from other Schema, Just give the table name like this..
    SELECT *
      FROM SCHEMA_USER.table_name;Thanks,
    Shankar

  • PL/SQL: ORA-00942: table or view does not exist

    Hi
    i have logged into my schema and trying to access the database "DAD" which has the table name "SCHOOL"
    i wrote a function which should give me new_sno when i give it the old_sno
    and i have this errors , pls help
    CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
    RETURN Number IS
    NEW_SNO Number:=0;
    BEGIN
    SELECT new_sno AS NEW_SNO
    FROM DAD.SCHOOL
    WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
    RETURN NEW_SNO;
    END ORIG_SN;
    Warning: Function created with compilation errors.
    Errors for FUNCTION ORIG_SN:
    LINE/COL ERROR
    5/1 PL/SQL: SQL Statement ignored
    6/15 PL/SQL: ORA-00942: table or view does not exist
    Thanks in advance ..

    Try this,
    CREATE VIEW SCHOOL_VIEW AS SELECT * FROM DAD.SCHOOL;and then change your function like
    CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
    RETURN Number IS
    my_new_sno Number:=0;
    BEGIN
    SELECT new_sno INTO my_new_sno FROM SCHOOL_VIEW WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
    RETURN my_new_sno;
    END ORIG_SN;and see if it is getting created without any errors.
    -Arun
    Edited by: Arunkumar Ramamoorthy on Aug 15, 2009 1:56 AM

  • ORA-01092: ORACLE instance terminated. Disconnection forced ORA-00942: table or view does not exist on 12C RAC

    Hi Geeks,
    I have encountered an issue while starting up my database on 12c RAC.
    Till mount it goes fine but when i attempt to open it throws me an error.
    Total System Global Area 1.5400E+10 bytes
    Fixed Size                  4737560 bytes
    Variable Size            2952791528 bytes
    Database Buffers         1.2415E+10 bytes
    Redo Buffers               26857472 bytes
    Database mounted.
    SQL> alter database open;
    alter database open
    ERROR at line 1:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00942: table or view does not exist
    Process ID: 11338068
    Session ID: 1429 Serial number: 3
    Here is the trace file output...
    ORACLE_HOME = /oracle_home/app/orahome
    System name:    AIX
    Node name:      INS1
    Release:        1
    Version:        7
    Machine:        00C8CCA74C00
    Instance name: INST1
    Redo thread mounted by this instance: 1
    Oracle process number: 7
    Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
    *** 2014-11-27 22:49:20.892
    *** SESSION ID:(197.5) 2014-11-27 22:49:20.892
    *** CLIENT ID:() 2014-11-27 22:49:20.892
    *** SERVICE NAME:() 2014-11-27 22:49:20.892
    *** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
    *** ACTION NAME:() 2014-11-27 22:49:20.892
    2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
    *** 2014-11-27 22:49:24.580
    Successfully allocated 32 recovery slaves
    Using 3 overflow buffers per recovery slave
    *** 2014-11-27 22:49:24.740
    Thread 1 checkpoint: logseq 15, block 2, scn 3510749
      cache-low rba: logseq 15, block 3
        on-disk rba: logseq 15, block 72, scn 3510824
      start recovery at logseq 15, block 3, scn 0
    *** 2014-11-27 22:49:24.981
    Started resilvering redo thread 1 seq 15 blocks 72-73
    *** 2014-11-27 22:49:24.994
    Completed resilvering redo thread 1 seq 15
    *** 2014-11-27 22:49:24.994
    Started writing zeroblks thread 1 seq 15 blocks 74-81
    *** 2014-11-27 22:49:24.994
    Completed writing zeroblks thread 1 seq 15
    ==== Redo read statistics for thread 1 ====
    Total physical reads (from disk and memory): 4096Kb
    -- Redo read_disk statistics --
    Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
    Longest record: 0Kb, moves: 0/104 (0%)
    Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
    Last redo scn: 0x0000.0035922b (3510827)
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 262144
    Longest hash chain = 1
    Average hash chain = 25/25 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 151/176 = 0.9
    *** 2014-11-27 22:49:25.007
    KCRA: start recovery claims for 25 data blocks
    *** 2014-11-27 22:49:25.039
    KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
    *** 2014-11-27 22:49:25.054
    Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
    *** 2014-11-27 22:49:25.060
    Completed redo application of 0.02MB
    *** 2014-11-27 22:49:25.235
    Completed recovery checkpoint
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 262144
    Longest hash chain = 1
    Average hash chain = 25/25 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 176/176 = 1.0
    Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
    *** 2014-11-27 22:49:26.000
    2014-11-27 22:49:26.000433 : Validate domain 0
    2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
    *** 2014-11-27 22:49:28.315
    Count of ofsmtab$: 0 entries
    *** 2014-11-27 22:49:28.732
    ORA-00942: table or view does not exist
    ORA-00942: table or view does not exist
    *** 2014-11-27 22:49:28.738
    USER (ospid: 20381876): terminating the instance due to error 942

    In my case the issue has fixed by executing the following..
    grant SELECT on SYS.USER$ to XDB;
    grant SELECT on SYS.USER$ to CTXSYS;
    grant SELECT on SYS.USER$ to DVSYS;
    grant SELECT on SYS.USER$ to LBACSYS;
    grant SELECT on SYS.USER$ to APEX_040200;
    grant SELECT on SYS.USER$ to DV_SECANALYST; 
    Refer the above screen shot...

  • Database startup showing ORA-00942: table or view does not exist in trace

    Hi Friends,
    SunOS 5.10 Generic_137112-06 i86pc i386 i86pc , 64 Bit
    Oracle 10.2.0.1.0
    While I am doing a startup, getting following error.
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 3221225472 bytes
    Fixed Size 2122544 bytes
    Variable Size 410819792 bytes
    Database Buffers 2801795072 bytes
    Redo Buffers 6488064 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forcedThe alert log shows the following
    Errors in file /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc:
    ORA-00942: table or view does not exist
    Error 942 happened during db open, shutting down database
    USER: terminating instance due to error 942
    Instance terminated by USER, pid = 11486
    ORA-1092 signalled during: ALTER DATABASE OPEN...A look at the trace file shows this
    /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /applns/oracle
    System name: SunOS
    Node name: N890
    Release: 5.10
    Version: Generic_137112-06
    Machine: i86pc
    Instance name: CTSD1
    Redo thread mounted by this instance: 1
    Oracle process number: 23
    Unix process pid: 11486, image: oracle@N890 (TNS V1-V3)
    *** SERVICE NAME:() 2011-02-16 19:24:50.188
    *** SESSION ID:(325.3) 2011-02-16 19:24:50.188
    Successfully allocated 3 recovery slaves
    Using 367 overflow buffers per recovery slave
    Thread 1 checkpoint: logseq 45929, block 2, scn 310788795>cache-low rba: logseq 45929, block 3
    >on-disk rba: logseq 45929, block 52, scn 310788832
    >start recovery at logseq 45929, block 3, scn 0
    ----- Redo read statistics for thread 1 -----
    Read rate (ASYNC): 24Kb in 0.31s => 0.08 Mb/sec
    Total physical reads: 4096Kb
    Longest record: 0Kb, moves: 0/61 (0%)
    Longest LWN: 16Kb, moves: 0/3 (0%), moved: 0Mb
    Last redo scn: 0x0000.128642df (310788831)
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 4/4 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 117/121 = 1.0
    *** 2011-02-16 19:24:50.515
    KCRA: start recovery claims for 4 data blocks
    *** 2011-02-16 19:24:50.515
    KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
    *** 2011-02-16 19:24:50.516
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 45929 Reading mem 0
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 4/4 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 121/121 = 1.0
    ORA-00942: table or view does not existI have searched MOS and Google, but didn;'t get any relevant results.
    Also flushed my shared_pool as mentioned in (http://www.tanelpoder.com/files/oracle_rowcache.pdf) after mount and started , still no luck
    Any help is appreciated
    Thanks
    SSN

    Hi,
    Thanks.
    Tried log mining, but still couldn't find the culprit. I think now, I have to drop and create this db.Still wondering what might have happened.
    select group#,status from v$log;
        GROUP# STATUS
             1 INACTIVE
             3 INACTIVE
             2 CURRENT
    SQL> select group#,MEMBER from v$logfile where group#=2;
        GROUP#
    MEMBER
             2
    /applns/oracle/oradata/CTSD1/redo02.log
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo02.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.
    SQL> select group#,MEMBER from v$logfile where group#=1;
        GROUP#
    MEMBER
             1
    /applns/oracle/oradata/CTSD1/redo01.log
             1
    /applns/oracle/oradata/CTSD1/redolog001.log
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo01.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redolog001.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.
    SQL> select group#,MEMBER from v$logfile where group#=3
        GROUP#
    MEMBER
             3
    /applns/oracle/oradata/CTSD1/redo03.log
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo03.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL>  EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.SSN

  • ORA-00942: table or view does not exist in database control

    Hi all,
    i am getting "ORA-00942: table or view does not exist" error while accessing tablespaces from database control. i am able to access control files, redo log files everything fine, but not tablespaces.
    database version ---> 10.2.0.1
    OS ----> RedHat Enterprise Linux 4 U 2
    but the database is working fine from SQL*Plus and other Editors. this error is only from database control. so what might be the cause.
    Any Ideas ...........
    Balaji

    hi,
    Have you tried to re register your database within OEM, CG

  • ERROR ORA-00942: table or view does not exist

    Hi:
    I created a .sql file and a loader file. Running the .sql file with sql * plus Worksheet:
    declare
    gr sdo_georaster;
    begin
    select image into gr from gis.RasterImages where geoid=1 for update;
    sdo_geor.generatePyramid(gr,'resampling=NN');
    update gis.RasterImages set image=gr where geoid=1;
    commit;
    end;
    I trying to create a pyramid,but the error appeared:
    ERROR at line 1:
    ORA-29400: DATA CONTROL ERROR ORA-00942: table or view does not exist
    ORA-06512: 在 "MDSYS.SDO_GEOR_INT", line 162
    ORA-06512: 在 "MDSYS.SDO_GEOR", line 826
    ORA-06512: 在 line 5
    I don't know why?
    Anyone can help me?
    Thanks.

    Hi,
    I think you are executing the select statement for schema X and the table is in the schema srnr.
    And schema X is not having select privilege on the table 'students' present in schema srnr.
    Goto schema srnr.
    Execute the following statement:
    grant select on students to X;
    This will give schema X the privilege to query the table students present in srnr.
    Regards,
    Anupama

  • A newbie problem - Why 'ORA-00942: table or view does not exist'

    Hi,
    I am a newbie having a very basic problem.
    I have just created a table by reading in a CSV file.
    However when I try to SELECT from it, I get an error message saying :-
    ORA-00942: table or view does not exist
    How can this be when I can see the table name ?
    I have tried a couple of things that I found in the Discussion Forum, like 'ALTER SCHEMA' and 'GRANT SELECT'.
    Neither seemed sensible because I have just created a table, and sure enough, neither helped.
    It's disappointing that something so basic can go wrong.
    I will be very grateful for any advice.
    Barry

    This tool and forum is awesome. I'm a developer that was never touched HTMLDB and now with in a month I'm developing applications quickly and when I have a question I have this active forum to ask my sometimes stupid and othertimes valid questions! This is great! I don't know where you all find the time to help out so much!
    It is a little addicting though... I find myself sitting down Saturday morning just to spend a couple of minutes reading the posts and next thing I know hours have gone by as I use what I read because I can't wait until Monday...
    Thank you all for everything!!!! HTMLDB, APEX, Javascript and now in another post I'm learning about "Fine Grained Access Control" or "Virtual Private Database".
    Enjoy, BillC :>)

  • Not able to create EM repository - ORA-00942: table or view does not exist

    -bash-3.00$ emca -config dbcontrol db -repos recreate
    STARTED EMCA at 2010-06-02 12:12:29
    EM Configuration Assistant, Version 10.2.0.1.0 Production
    Copyright (c) 2003, 2005, Oracle.  All rights reserved.
    Enter the following information:
    Database SID: eric1
    Listener port number: 1521
    Password for SYS user:
    Password for DBSNMP user:
    Password for SYSMAN user:
    Email address for notifications (optional):
    Outgoing Mail (SMTP) server for notifications (optional):
    You have specified the following settings
    Database ORACLE_HOME ................ /oracle/product/10.2.0/db_1
    Database hostname ................ solx
    Listener port number ................ 1521
    Database SID ................ eric1
    Email address for notifications ...............
    Outgoing Mail (SMTP) server for notifications ...............
    Do you wish to continue? [yes(Y)/no(N)]: Y
    2010-06-02 12:12:52 oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log.
    2010-06-02 12:13:02 oracle.sysman.emcp.EMReposConfig dropRepository
    INFO: Dropping the EM repository (this may take a while) ...
    2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
    WARNING: Error executing /oracle/product/10.2.0/db_1/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=solx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=eric1))) -repos_user SYSMAN -action drop -verbose -output_file /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_2010-06-02_12-13-02-PM.log
    2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
    SEVERE: Error dropping the repository
    2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
    INFO: Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_<date>.log for more details.
    2010-06-02 12:13:05 oracle.sysman.emcp.EMConfig perform
    SEVERE: Error dropping the repository
    Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log for more details.
    Could not complete the configuration. Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log for more details.So I looked into a log file: /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log
    Here is an end of it ( I can paste all log file if necessary but it is very long):
    CONFIG: Starting execution: /oracle/product/10.2.0/db_1/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=solx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=eric1))) -repos_user SYSMAN -action drop -verbose -output_file /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_2010-06-02_12-13-02-PM.log
    2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Exit value of 51
    2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Enter SYS user's password :
    Enter repository user password :
    Getting temporary tablespace from database...
    prepare(SELECT tablespace_name FROM dba_tablespaces WHERE contents='TEMPORARY'  AND status='ONLINE'): ORA-00942: table or view does not exist (DBD ERROR: error possibly near <*> indicator at char 28 in 'SELECT tablespace_name FROM <*>dba_tablespaces WHERE contents='TEMPORARY'  AND status='ONLINE'')
    2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: stty: : No such device or address
    stty: : No such device or address
    stty: : No such device or address
    stty: : No such device or address
    2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
    WARNING: Error executing /oracle/product/10.2.0/db_1/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=solx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=eric1))) -repos_user SYSMAN -action drop -verbose -output_file /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_2010-06-02_12-13-02-PM.log
    2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
    SEVERE: Error dropping the repository
    2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
    INFO: Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_<date>.log for more details.
    2010-06-02 12:13:05 oracle.sysman.emcp.EMConfig perform
    SEVERE: Error dropping the repository
    Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log for more details.
    2010-06-02 12:13:05 oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Error dropping the repository
            at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:176)
            at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:127)
            at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
            at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
            at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
            at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
            at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)...and here I can easly see that error: ORA-00942: table or view does not exist.
    But what does it mean to me ? I mean what should I ro to create/recreate missing table or view ?

    Hi, so here are my tries:
    1. admin:
    Below Dirs dont not exist:
    <ORACLE_HOME>/<hostname_sid>
    <ORACLE_HOME>/oc4j/j2ee/OC4J_DBConsole_<hostname>_<sid>
    ...also it was unable to drop user - does not exist
    -bash-3.00$ sqlplus "/as sysdba"
    SQL*Plus: Release 10.2.0.2.0 - Production on Wed Jun 2 12:55:44 2010
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Release 10.2.0.2.0 - Production
    SQL> sqlplus "/as sysdba"
    drop user sysman cascade;
    drop role MGMT_USER;
    drop user MGMT_VIEW cascade;
    drop public synonym MGMT_TARGET_BLACKOUTS;
    drop public synonym SETEMVIEWUSERCONTEXT;
    SP2-0734: unknown command beginning "sqlplus "/..." - rest of line ignored.
    SQL> drop user sysman cascade
    ERROR at line 1:
    ORA-01918: user 'SYSMAN' does not exist
    SQL> drop role MGMT_USER
    ERROR at line 1:
    ORA-01919: role 'MGMT_USER' does not exist
    SQL> drop user MGMT_VIEW cascade
    ERROR at line 1:
    ORA-01918: user 'MGMT_VIEW' does not exist
    SQL> drop public synonym MGMT_TARGET_BLACKOUTS
    ERROR at line 1:
    ORA-01432: public synonym to be dropped does not exist
    SQL> drop public synonym SETEMVIEWUSERCONTEXT
    ERROR at line 1:
    ORA-01432: public synonym to be dropped does not exist
    {code}
    I also tried this:
    2. coskan         
    {code}
    -bash-3.00$ sqlplus sys/qaz123@eric1 as sysdba
    SQL*Plus: Release 10.2.0.2.0 - Production on Wed Jun 2 12:51:34 2010
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Release 10.2.0.2.0 - Production
    SQL> SELECT tablespace_name FROM dba_tablespaces WHERE contents='TEMPORARY' AND status='ONLINE';
    SELECT tablespace_name FROM dba_tablespaces WHERE contents='TEMPORARY' AND status='ONLINE'
    ERROR at line 1:
    ORA-00942: table or view does not exist
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • ORA-00942 - What is the table or view that not exists?

    Hi,
    Is there any way to identify which table or view that the error message refers, in a SQL code (select, insert, etc)?

    SQL> select * from garbage;
    select * from garbage
    ERROR at line 1:
    ORA-00942: table or view does not exist
    SQL> insert into garbage values (1);
    insert into garbage values (1)
    ERROR at line 1:
    ORA-00942: table or view does not exist
    SQL> update garbage set a = 1;
    update garbage set a = 1
    ERROR at line 1:
    ORA-00942: table or view does not exist
    SQL> delete from garbage ;
    delete from garbage
    ERROR at line 1:
    ORA-00942: table or view does not exist
    SQL> drop table garbage;
    drop table garbage
    ERROR at line 1:
    ORA-00942: table or view does not exist
    SQL>

  • Scheduling error causing - ORA-00942: table or view does not exist

    Hello
    I have the following problem, I created an scenario that its supposed to run every 1 hour, it has an interface that moves an amount of records from one table to another (the amount of records is not fixed it changes). The problem arises when the amount of data to move is so big that the hour between executions is not enough and the scenario is still running when a second execution of the same scenario starts to run (as scheduled), so in the interface when the second process is trying to run the loading step it fails and I got the error ODI-1228 Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exists. So the scenario fails and it logs this error. I think the error is due to the table in stage being locked by the first execution of the scenario.
    I don't want to change the amount of time between executions because it is usually enough, I just want to avoid the execution of a scenario when there is another execution of the same scenario still running, is there any way to do this?.
    Thanks
    LJ

    Hello
    Thanks for your answer, I already have the "Interval between repetitions" property set to 1 hour, but when one execution takes more than one hour the scheduler starts another and I have 2 processes accessing the same table and it is when I have a concurrence error on the staging table.
    How can I ensure that I wont have two or more executions of the same scenario running at the same time?.
    Thanks,
    LJ

  • SQL Error: ORA-00942: table or view does not exist + CX_RS_SQL_ERROR

    HI ,
    we are facing below issue while activating info object xxxxxxxx
    " SQL Error: ORA-00942: table or view does not exist "  and   " CX_RS_SQL_ERROR  "
    can any one help us out to resolve this issue.
    Thanks,
    EDK......

    Hi,
    Check the corrections given in the note 990764:
    Reason and Prerequisites
    Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
    ORA-00942: table or view does not exist
    Fehler in CL_SQL_RESULT_SET  Include NEXT_PACKAGE
    RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
    Solution
    SAP NetWeaver 2004s BI
               Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
    In urgent cases you can implement the correction instructions.
    The correction instructions contain the tightened inspection for characteristics.
    Regards,
    Anil Kumar Sharma .P

  • Java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist while invoking a DBAdapter

    I have a WebService which is invoked , the request is routed through the mideator to the DBAdapter .DBAdapter interacts with the database and replies the result.
    I send in the CreditCardNumber in the request and recieve its Status (VALID,INVALID). i get this error every time . i have tried almost every thing to fix this . Please help me with same .
    Below is the complete error stacktrace.
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getCreditValidationSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [getCreditValidationSelect], Descriptor name: [getCreditValidation.Creditcardinfo]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . See root exception for the specific exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "942" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    Thanks in advance

    Can you please check the following
    a. check the JNDI Configuration. ( check for the value used for XADatasourceName )
    b. check the Data source created for the User.
    c. Incase you have updated the existing JNDI then you need to update the adapter with the New Deployment Plan.
    Thanks,
    Sunil Gopal

Maybe you are looking for