ORA-00980 during ValidStruct
Hi Oracle-experts!
After ValidStruct job I get the following errors:
BR0301E SQL error -980 at location stats_tab_validate-2, SQL statement:
'ANALYZE TABLE "SYS"."STREAMS$_APPLY_SPILL_MSGS_PART" VALIDATE STRUCTURE CASCADE ONLINE'
ORA-00980: synonym translation is no longer valid
BR0893E Validating structure failed for table/cluster SYS.STREAMS$_APPLY_SPILL_MSGS_PART
Can some one help me to solve this error?
Hello,
What is your Oracle release?
If you are at 10.2.0.1 then you have to upgrade to the latest 10.2.0.4, if you are already in the correct release then follow the note
provided in the previous post.
Regards,
Yoganand.V
Similar Messages
-
If you see ORA-00980 during RPM 13.1.6 install
While upgrading from 13.1.5.1 to 13.1.6 the compile invlaid object step of the rpm install failed.
The cause was in invalid package RECLASS_SQL.
The error that was being shown in the compile of RECLASS_SQL was ORA-00980
The reason for the error was a bad synonym obj_rcls_cost_event_rec.
When I looked at the source for the synonym it was pointing at SYS instead of RMS13 schema
I rebuild the Synonym and all was good.
Hope this helps someone else.
Edited by: user9083531 on Sep 29, 2012 9:16 AMWhile upgrading from 13.1.5.1 to 13.1.6 the compile invlaid object step of the rpm install failed.
The cause was in invalid package RECLASS_SQL.
The error that was being shown in the compile of RECLASS_SQL was ORA-00980
The reason for the error was a bad synonym obj_rcls_cost_event_rec.
When I looked at the source for the synonym it was pointing at SYS instead of RMS13 schema
I rebuild the Synonym and all was good.
Hope this helps someone else.
Edited by: user9083531 on Sep 29, 2012 9:16 AM -
ORA-39126 during an export of a partition via dbms_datapump
Hi ,
i did export using datapump in command line everything went fine but while exporting via dbms_datapump i got this:
ORA-39126 during an export of a partition via dbms_datapump
ORA-00920
'SELECT FROM DUAL WHERE :1' P20060401
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6228
the procedure is:
PROCEDURE pr_depura_bitacora
IS
l_job_handle NUMBER;
l_job_state VARCHAR2(30);
l_partition VARCHAR2(30);
v_sql VARCHAR2(2000);
BEGIN
-- Create a user-named Data Pump job to do a "table:partition-level" export
-- Local
select 'P'|| to_char((select min(STP_LOG_DATE) from SAI_AUDITBITACORA),'YYYYMM')||'01'
into l_partition
from user_tab_partitions
where table_name = 'SAI_AUDITBITACORA'
and rownum = 1;
l_partition := rtrim (l_partition,' ');
l_job_handle:= DBMS_DATAPUMP.OPEN
operation=>'EXPORT',
job_mode =>'TABLE',
job_name =>'EXPORT_ORACLENSSA'
-- Schema filter
DBMS_DATAPUMP.METADATA_FILTER
handle => l_job_handle,
name => 'SCHEMA_EXPR',
value => 'IN (''ORACLENSSA'')'
DBMS_OUTPUT.PUT_LINE('Added filter for schema list');
-- Table filter
DBMS_DATAPUMP.METADATA_FILTER
handle => l_job_handle,
name => 'NAME_EXPR',
value => '=''SAI_AUDITBITACORA'''
DBMS_OUTPUT.PUT_LINE('Added filter for table expression');
-- Partition filter
DBMS_DATAPUMP.DATA_FILTER
handle => l_job_handle,
name => 'PARTITION_EXPR',
value => l_partition,
table_name => 'SAI_AUDITBITACORA'
DBMS_OUTPUT.PUT_LINE('Partition filter for schema list');
DBMS_DATAPUMP.ADD_FILE
handle => l_job_handle,
filename => 'EXP'||l_partition||'.DMP',
directory => 'EXP_DATA_PUMP',
filetype => 1
DBMS_DATAPUMP.ADD_FILE
handle => l_job_handle,
filename => 'EXP'||l_partition||'.LOG',
directory => 'EXP_DATA_PUMP',
filetype => 3
DBMS_DATAPUMP.START_JOB
handle => l_job_handle,
skip_current => 0
DBMS_DATAPUMP.WAIT_FOR_JOB
handle => l_job_handle,
job_state => l_job_state
DBMS_OUTPUT.PUT_LINE('Job completed - job state = '||l_job_state);
DBMS_DATAPUMP.DETACH(handle=>l_job_handle);
END;
I've already drop and recreate the directory, granted read, write to public and to user, grant create session, create table, create procedure, exp_full_database to user, restart the database and the listener with the var LD_LIBRARY pointing first to $ORACLE_HOME/lib, and add more space to temporary tablespace.The basic problem is:
Error: ORA 920
Text: invalid relational operator
Cause: A search condition was entered with an invalid or missing relational
operator.
Action: Include a valid relational operator such as =, !=, ^=, <>, >, <, >=, <=
, ALL, ANY, [NOT] BETWEEN, EXISTS, [NOT] IN, IS [NOT] NULL, or [NOT]
LIKE in the condition.
Obviously this refers to the invalid statement 'SELECT FROM DUAL ...'. I also recommend, you should contact Oracle Support, because it happens inside an Oracle provided package.
Werner -
Hi all,
Need some help from all out there
In our Sun Cluster 3.1 Data Service for Oracle RAC 9.2.0.7 (Solaris 9) configuration, my team had encountered
ora-29701 *Unable to connect to Cluster Manager*
during the startup of the Oracle RAC database instances on the Oracle RAC Server resources.
We tried the attached workaround by Oracle. This workaround works well for the 1^st time but it doesnt work anymore when the server is rebooted.
Kindly help me to check whether anyone encounter the same problem as the above and able to resolve. Thanks.
Bug No. 4262155
Filed 25-MAR-2005 Updated 11-APR-2005
Product Oracle Server - Enterprise Edition Product Version 9.2.0.6.0
Platform Linux x86
Platform Version 2.4.21-9.0.1
Database Version 9.2.0.6.0
Affects Platforms Port-Specific
Severity Severe Loss of Service
Status Not a Bug. To Filer
Base Bug N/A
Fixed in Product Version No Data
Problem statement:
ORA-29701 DURING DATABASE CREATION AFTER APPLYING 9.2.0.6 PATCHSET
*** 03/25/05 07:32 am ***
TAR:
PROBLEM:
Customer applied 9.2.0.6 patchset over 9.2.0.4 patchset.
While creating the database, customer receives following error:
ORA-29701: unable to connect to Cluster Manager
However, if customer goes from 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the problem does not occur.
DIAGNOSTIC ANALYSIS:
It seems that the problem is with libskgxn9.so shared library.
For 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the install log shows the following:
installActions2005-03-22_03-44-42PM.log:,
[libskgxn9.so->%ORACLE_HOME%/lib/libskgxn9.so 7933 plats=1=>[46]langs=1=> en,fr,ar,bn,pt_BR,bg,fr_CA,ca,hr,cs,da,nl,ar_EG,en_GB,et,fi,de,el,iw,hu,is,in, it,ja,ko,es,lv,lt,ms,es_MX,no,pl,pt,ro,ru,zh_CN,sk,sl,es_ES,sv,th,zh_TW, tr,uk,vi]]
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]]
For 9.2.0.4 -> 9.2.0.6, install log shows:
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]] does not exist.
This means that while patching from 9.2.0.4 -> 9.2.0.5, Installer copies the libcmdll.so library into libskgxn9.so, while patching from 9.2.0.4 -> 9.2.0.6 does not.
ORACM is located in /app/oracle/ORACM which is different than ORACLE_HOME in customer's environment.
WORKAROUND:
Customer is using the following workaround:
cd $ORACLE_HOME/rdbms/lib make -f ins_rdbms.mk rac_on ioracle ipc_udp
RELATED BUGS:
Bug 4169291Check if following MOS note helps.
Series of ORA-7445 Errors After Applying 9.2.0.7.0 Patchset to 9.2.0.6.0 Database (Doc ID 373375.1) -
ORA-00980: synonym translation is no longer valid
Hi
I get the following error when try to insert xml
SQL> ed
Wrote file afiedt.buf
1 insert into "bulkCmConfigDataFile_TAB"
2 values(
3 XDB_UTILITIES.getXMLFromFile('Test.xml','DATA_DIR').
4 createSchemaBasedXML('http://127.0.0.1:8081/public/xsds/configData.xsd')
5* )
SQL> /
XDB_UTILITIES.getXMLFromFile('Test.xml','DATA_DIR').
ERROR at line 3:
ORA-00980: synonym translation is no longer valid
I ran the following sql
SQL> select STATUS from dba_objects where object_name = 'XDB_UTILITIES';
STATUS
VALID
The directory was created using
SQL> show user
USER is "XMLUSER"
SQL> create or replace directory data_dir as 'c:\xml';
Directory created.
What could be the problem here?
Thanks
Devashish
10g Rel2Devashish
Unfortunately the way your XML Schema are designed I do not think XML DB is going to be able to handle them. The problem is the substituion group for vsData. Basically it defines a very flat structure which will require a table with more than 1000 columns to persist. Since the structure is very flat we cannot use the technique of pushing sections of the structure into out-of-line tables to store it, which is the normal workaround.
This looks to me like a case of the classic mistake of modeling a Java Object structure directly into XML. In general this makes no sense. There is no common information between all of the different elements of the substition group or the vsData type, so there is no point in having all the members of the substition grouip descend from a single abstract type. You could just as easily model your XML Structure as a choice of any of the elements defined in the substition group. If new elements need to be introduced this could be done using extension of the existing complexType with new choices.
The advantage of this approach is that you can push each of the possible chocies into a seperate table, and avoid the 1000 column limit..
Sorry for the bad news, hope you have flexibility to re-architect the XML Schema. Note that this should not affect the instance documents -
Error ORA-00980: synonym translation is no longer valid when i issue
i accidentally drop one of my table. To bring it back i used Imp tool. But it gives an error ORA-00980: synonym translation is no longer valid when i issue
Select * from ship_sched_fact_notice_det
Action taken using Imp
Username: erpdada
Password:
Connected to: Oracle Database 10g Release 10.1.0.2.0 - Production
Import file: EXPDAT.DMP > e:\erpdada_august13.dmp
Enter insert buffer size (minimum is 8192) 30720> 30720
Export file created by EXPORT:V10.01.00 via conventional path
Warning: the objects were exported by SYSTEM, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
List contents of import file only (yes/no): no > y
Import entire export file (yes/no): no > n
Username: erpdada
Enter table(T) or partition(T:P) names. Null list means all tables for user
Enter table(T) or partition(T:P) name or . if done: ship_sched_fact_notice_det
Enter table(T) or partition(T:P) name or . if done: .
"CREATE PUBLIC SYNONYM "XMLTYPE" FOR "SYS"."XMLTYPE""
"CREATE TABLE "SHIP_SCHED_FACT_NOTICE_DET" ("SSFND_ITEM_NOT_DET_ID" NUMBER, "
""SSFN_FACTORY_ID" VARCHAR2(40) NOT NULL ENABLE, "SSFN_FAC_NOTICE_ID" NUMBER"
" NOT NULL ENABLE, "SSD_SHIP_ITEM_ID" NUMBER NOT NULL ENABLE, "OI_ITEM_ID" N"
"UMBER NOT NULL ENABLE, "ORDER_TYPE" VARCHAR2(1), "SSFND_ITEM_CODE" VARCHAR2"
"(300), "SSFND_QTY" NUMBER, "SSFND_CTN" NUMBER, "SSFND_TOT_CBM" NUMBER, "SSF"
"ND_REM1" VARCHAR2(256), "SSFND_REM2" VARCHAR2(256), "SSFND_UNIT_ID" VARCHAR"
"2(40), "SSFND_IS_EXCL_SUMMARY" VARCHAR2(1)) PCTFREE 10 PCTUSED 40 INITRANS"
" 1 MAXTRANS 255 STORAGE(INITIAL 81920 FREELISTS 1 FREELIST GROUPS 1 BUFFER_"
"POOL DEFAULT) TABLESPACE "ORDER_DATA01" LOGGING NOCOMPRESS"
. . skipping table "SHIP_SCHED_FACT_NOTICE_DET"
"GRANT DELETE ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"GRANT INSERT ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"GRANT SELECT ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"GRANT UPDATE ON "SHIP_SCHED_FACT_NOTICE_DET" TO "SHIPMENT_NOTICE""
"CREATE UNIQUE INDEX "PK_SHIP_SCHED_FACT_NOTICE_DET" ON "SHIP_SCHED_FACT_NOT"
"ICE_DET" ("SSFND_ITEM_NOT_DET_ID" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STO"
"RAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLE"
"SPACE "ORDER_DATA01" LOGGING"
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ADD CONSTRAINT "PK_SHIP_SCHED_FAC"
"T_NOTICE_DET" PRIMARY KEY ("SSFND_ITEM_NOT_DET_ID") USING INDEX PCTFREE 10 "
"INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1"
" BUFFER_POOL DEFAULT) TABLESPACE "ORDER_DATA01" LOGGING ENABLE "
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ADD CONSTRAINT "SHIP_SCHED_FACT_NO"
"TICE_DE_FK1" FOREIGN KEY ("SSD_SHIP_ITEM_ID") REFERENCES "SHIPPING_SCHEDULE"
"_DETAILS" ("SSD_SHIP_ITEM_ID") ENABLE NOVALIDATE"
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ADD CONSTRAINT "SHIP_SCHED_FACT_NO"
"TICE_DE_FK2" FOREIGN KEY ("SSFN_FAC_NOTICE_ID") REFERENCES "SHIP_SCHED_FACT"
"ORY_NOTICE" ("SSFN_FAC_NOTICE_ID") ENABLE NOVALIDATE"
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ENABLE CONSTRAINT "SHIP_SCHED_FACT"
"_NOTICE_DE_FK1""
"ALTER TABLE "SHIP_SCHED_FACT_NOTICE_DET" ENABLE CONSTRAINT "SHIP_SCHED_FACT"
"_NOTICE_DE_FK2""
Import terminated successfully with warnings.
I drop the old synonym and re-create it but still it gives the same error...Since you are on 10g did you try flashback table feature - http://tonguc.wordpress.com/2007/01/01/oracle-10g-flashback-versions-query-drop-table-and-recyclebin-management/
FLASHBACK TABLE <tabname> TO BEFORE DROP;
If you didnt use purge option, the dropped object is on your recyclebin - http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9018.htm#sthref9593
Best regards. -
Has anyone else seen ORA-00980 synonym errors when using XMLConcat?
Hi,
Using 10.2.0.2 ( as shown by select * from v$instance), I get an ORA-00980 "Synonym translation is no longer valid" message.
This occurs for any attempt to use XMLConcat, for a simple example:
SELECT XMLConcat(XMLElement("first", 'Steve'),
XMLElement("last", 'Jones'))
AS "RESULT"
FROM dual;
I'm guessing that there is/was a problem with an upgrade since I've found a few vague references to a bug fixed in 9.2 that seems to point in that direction.
Our DBA team is looking into it, but it would be interesting to hear if other developers hit the same problem and if there was a relatively easy fix.
Thanks!SQL> conn / as sysdba
SQL> @catnoqm
SQL> @catqmTry to fix it first though manually. The upgrade probably went wrong somehow...
On the FAQ on this forum Mark states:
XML DB FAQ
How do I uninstall XML DB ? How do I re-install XML DB ?
Posted: Sep 11, 2006 10:28 PM mdrake in response to: mdrake
To uninstall XML DB run the sql script $ORACLE_HOME/rdbms/admin/catnoqm.
Note that running this script will
1. DELETE ALL INFORMATION STORED IN THE ORACLE XML DB REPOSITORY AND XDB DATABASE SCHEMA
2. PERMANENTLY INVALIDATE ANY XMLTYPE TABLES OR COLUMNS THAT ARE ASSOCIATED WITH A REGISTERED XML SCHEMA.
IF THE XDB USER IS DROPPED THERE IS NO WAY TO RECOVER THE DATA IN THESE XMLTYPE TABLES OR COLUMNS.
Please do not uninstall XML DB in a production database without explicit instructions from Oracle Support to do so.
To re-install XDB, after running catnoqm.sql, stop and restart the instance and then run catqm as described in the previous post. Backup your database first via RMAN...
Edited by: Marco Gralike on Feb 13, 2009 8:11 PM -
BR error BR0301W SQL error -980 at location BrDbfInfoGet-33 , ORA-00980
Hi <br/>
i get this error by all kind backup and by checkdb, verify db<br/>
<br/>
Oracle 10.2.0.4, RHEL 4 32bit, <br/>
Netweaver 2004s (7)<br/>
<br/>
I have one Oracle NW7 for Netweaver PI (NW7) and Portal (EP7)<br/>
<br/>
<br/>
<br/>
BR0051I BRBACKUP 7.00 (18)<br/>
BR0055I Start of database backup: bedxcwak.afd 2010-08-15 12.21.54<br/>
BR0477I Oracle pfile /oracle/NW7/102_32/dbs/initNW7.ora created from spfile /oracle/NW7/102_32/dbs/spfileNW7.ora<br/>
<br/>
BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR9DB.SDBAH<br/>
BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR9DB.SDBAD<br/>
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR9DB.MLICHECK<br/>
BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR9DB.SAPLIKEY<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.55<br/>
BR0301W SQL error -980 at location BrbDbLogOpen-5, SQL statement:<br/>
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20100815122154', 'afd', 'NW7', ' ', '9999', ' ', 'bedxcwak', ' ')'<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0324W Insertion of database log header failed<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301W SQL error -980 at location BrDbfInfoGet-32, SQL statement:<br/>
'DELETE FROM SAP_SDBAH WHERE BEG > '10000000000000' AND BEG < '20090711000000''<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301W SQL error -980 at location BrDbfInfoGet-33, SQL statement:<br/>
'DELETE FROM SAP_SDBAD WHERE BEG > '10000000000000' AND BEG < '20090711000000''<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301E SQL error -980 at location BrComprDurGet-1, SQL statement:<br/>
'OPEN curs_6 CURSOR FOR'<br/>
'SELECT FUNCT, POS, LINE FROM SAP_SDBAD WHERE BEG = '00000000000001' AND (FUNCT = 'CMP' OR FUNCT = 'CMP' OR FUNCT = 'DUS' OR FUNCT = 'DUM') ORDER BY FUNCT'<br/>
ORA-00980: synonym translation is no longer valid<br/>
BR0314E Collection of information on database files failed<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0301W SQL error -980 at location BrbDbLogOpen-5, SQL statement:<br/>
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20100815122154', 'afd', 'NW7', ' ', '9999', ' ', 'bedxcwak', ' ')'
ORA-00980: synonym translation is no longer valid<br/>
BR0324W Insertion of database log header failed<br/>
<br/>
BR0056I End of database backup: bedxcwak.afd 2010-08-15 12.21.56<br/>
BR0280I BRBACKUP time stamp: 2010-08-15 12.21.56<br/>
BR0054I BRBACKUP terminated with errors<br/>
<br/>
###############################################################################<br/>
<br/>
<br/>
Please help<br/>
<br/>
BR <br/>
Dawid<br/>after aply this Snote i get this by trying backup my DB <b/>
Job log
Job started
Step 001 started (program RSDBAJOB, variant &0000000000029, user ID GLOMBDAW)
Execute logical command BRBACKUP On host nw2004s
Parameters:-u / -jid ALL__20100815175009 -c force -t online -m all -p initNW7.sap
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bedxdzeb.and 2010-08-15 17.50.13
BR0280I BRBACKUP time stamp: 2010-08-15 17.50.13
BR0301E SQL error -942 at location BrDbConnect-4,SQL statement:
'SELECT NAME, NVL(RESETLOGS_CHANGE#, 0), NVL(TO_NUMBER(TO_CHAR(RESETLOGS_TIME, 'YYYYMMDDHH24MISS')), 0), NVL(TO_NUMBER(TO_CHAR(C
ORA-00942: table or view does not exist
BR0310E Connect to database instance NW7 failed
BR0280I BRBACKUP time stamp: 2010-08-15 17.50.13
BR0301E SQL error -942 at location BrDbConnect-4,SQL statement:
'SELECT NAME, NVL(RESETLOGS_CHANGE#, 0), NVL(TO_NUMBER(TO_CHAR(RESETLOGS_TIME, 'YYYYMMDDHH24MISS')), 0), NVL(TO_NUMBER(TO_CHAR(C
ORA-00942: table or view does not exist
BR0310E Connect to database instance NW7 failed
BR0056I End of database backup: bedxdzeb.and 2010-08-15 17.50.13
BR0280I BRBACKUP time stamp: 2010-08-15 17.50.13
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished -
ORA-00980 error when clicking schema's and synonyms tab.
We just moved our DEV database to a 64bit box and now when going into OEM and clicking on any of the schema's we get ORA-00980 synonym translation is no longer valid. Clicking Ok will get us through but then clicking on synonyms tab we get the same error and no information is in the right frame. SQL plus and Toad are working fine connecting to the same database.
Provide Details:
- Database Target Version / Plattform
- OMS Version / Plattform
- Agent Version
Regards,
Martin -
Ora-00980 creating mv over db link
Hi,
I need some help traking down a pesky ora-00980 syn tranlation no longer valid. Here is my situation. I have a view foo
created in schema A that access data over a db link defined in schema A. User A can access data just fine. User A has granted select on the view to user B. User B can select data from the view just fine.
select * from a.foo ;
...lots of data
User B sees data...no synonym is involved.
Now user B tries to create a mv
create materialized view bar as select * from a.foo;
throws ora-00980
User A can create the same MV just fine.
Any suggestions? 10.2.0.4.0
SteveHi,
I suppose you are getting a below problem.
If you have a table in schema A of remote database.
Synonym exist in schema B of local database.
Synonym or when you try to exist this synonym from any other schema or database through pl/sql you would get ora-980 (ie. third level resolution is not possible through PL/sql).
Am not sure whether this would hold true for materialized view or not.
As a test case,
Create a synonym in schema B pointing directly to schema A of remote database (instead of via schema A of local database). Now try to create a materialized view.
But before that make sure schema B has a direct access to synonym of A (without any roles)
Regards
Anurag Tibrewal. -
ORA-04031 during export on CTX-index
Hi !
I get ORA-04031 during export when an interMedia CTX-Index should get exported. The exact error message is:
unable to allocate 4072 bytes of shared memory ("shared pool", "DBMS_SYS_SQL", "PL/SQL MPCODE", "BAMIMA: BAM Buffer")
followed by
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: in "SYS.DBMS_SQL", line 9
ORA-06512: in "SYS.DBMS_EXPORT_EXTENSION", line 244
Any hints for me what I could do?
TIA,
StefanInteresting. You should open a thread with a more relevant title about views with pk / fk constraints.
I don't have a way to solve your problem --- to identify such views.
Hemant K Chitale -
Form - Remote DB - Link - Synonym - ORA-00980: synonym translation invalid
All,
I have created a PUBLIC LINK AND SYNONYM on a table in a remote DB using the Navigator/Wizard. I then tried to create a FORM using the Wizard. In the Wizard I press enter to FINISH and I receive the error listed below.
Note I have read and read and re-read all info available to me on the subject. Some posts on MetaLink and these forums suggested that the Link and Synonym made Public - they are as they live in the Public Schema. Another doc stated the "Returning" statement was the problem.
I have tested this in SQLPLus and it works fine.
What is the is problem with this and how do I fix it?????
Thanks,
Bill G...
Error creating package PORTAL_DEMO.FORM_1
Line/Column Error
242/18 PL/SQL: ORA-00980: synonym translation is no longer valid
236/65530 PL/SQL: SQL Statement ignored
284/65 PL/SQL: ORA-00980: synonym translation is no longer valid
284/28 PL/SQL: SQL Statement ignored
284/16 PLS-00341: declaration of cursor '_tc' is incomplete or malformed
290/25 PL/SQL: Item ignored
321/30 PLS-00320: the declaration of the type of this expression is incomplete or malformed
321/13 PL/SQL: SQL Statement ignored
357/38 PLS-00320: the declaration of the type of this expression is incomplete or malformed
354/13 PL/SQL: Statement ignored
369/34 PLS-00320: the declaration of the type of this expression is incomplete or malformed
369/17 PL/SQL: SQL Statement ignored
380/30 PLS-00320: the declaration of the type of this expression is incomplete or malformed
380/13 PL/SQL: SQL Statement ignored
387/38 PLS-00320: the declaration of the type of this expression is incomplete or malformed
384/13 PL/SQL: Statement ignored
400/26 PLS-00320: the declaration of the type of this expression is incomplete or malformed
400/9 PL/SQL: SQL Statement ignored
464/63 PL/SQL: ORA-00980: synonym translation is no longer valid
464/26 PL/SQL: SQL Statement ignoredYeah, it is pretty simple really. Metalink note 174618.1 covers it. The note is for Rel1, but the same works with Rel2.
Cut and paste doesnt work well here, but if you cant access the note, I can reformat it and paste it in here. -
SQL Developer BUG - ORA-00980 Synonym Translation No Longer Valid
We have a read only database of our Production and when I try to access any data using the SQL Developer, I'm getting the following Error.
Error at Command Line:1 Column:14
Error report:
SQL Error: ORA-00980: synonym translation is no longer valid
If I access the same from SQL Plus, Toad or SQL Station, It works fine. Seems some error in SQL Developer.
Any one with Ideas or suggestions.we have DB cloned from Prod everynight and is available for us on readonly access. No read /write privs to any user including DBA.
I think the DB is opened with ALTER DATABASE OPEN READ ONLY;
Also to mention, all the tables in the db can be accessible only by read only user who was given select permission on synonyms.
--VB -
ORA-26667 during checkpoint retention check
HI Guys
I have an environment which is being replicated in 2 ways (DML,DDL ) RDBMS 10.2.0.4 , each RDBMS is running in RAC (3 nodes one RDBMS) and another running (2 nodes RAC) everything was running without problems for the last 3 months however last weekend I got
Sat Feb 14 23:18:41 2009
STREAMS Warning: ORA-26667 during checkpoint retention check <= this message is the first kind of message that we got
Sun Feb 15 05:18:43 2009
STREAMS Capture C 1: first scn changed.
scn: 0x0009.79468518
However I took a look that day and I dint find any issue I looked for that problem in metalink but I didn't find any problem , this message came out when the checkpoint retention time moved
the checkpoint retention time in streams is a number of days that the capture process retains checkpoints before purging them automatically . A capture process periodically computes the age of a checkpoint by subtracting the next_time of the archived redo log that corresponds to the checkpoint from dba_capture.first_time of the archived redo log file containing the required checkpoint scn
if the resulting value is grater than the checkpoint retention time then the capture process automatically purges the checkpoint by advancing the dba_capture.first_scn value all the archived retained by the dba_caprure process can be seen using dba_registered_archived_log view
the default retention time is 60 days
i didnt find any error in the RDBMS therefore I didnt do anything but on Monday morning I got a lot of replication errors caused by
ORA-01403 , after fixing all those errors I changes of the database that I got that error were not replicated across the other database , it could explain why many tables got out of sync , seems the reason was the propagation process was hanging , I stopped and restarted no changes were received in the other database , as a workaround I recreate it and the problem was fixed . Have you had a problem like this before ?
Rgdsbrowsing on Metalink seems the way to trace the root cause of this kind of problem is running the Oracle Streams Healtcheck right away after we got this kind of problem , seems the error that I got was just a coincidence because there is nothing related
-
ORA-29540 during full database export
Hi,
Anyone encounter this error ORA-29540 during full database export. Have check out the web site for solution. Have check that the init file compatible is set to 8.1.0, the public synonym dba_java is been removed. However after the above remedies, the problem still occured. My database version is 8.1.5. Please let me know if there is other solution to this problem.
Thank You ...
regards,
lbsHi,
Thanks...Any idea how to check whether the installation for the initjvm.sql is successful. cos I just took over from the previous DBA and he too have no idea...
Thank You..
Maybe you are looking for
-
Can I download Photoshop from a different download program?
There's no way I'm going to be able to download with the adobe assistant. It will take way too long. I do have a different one though, and if it kicks me off the internet, I can just resume where I left off. Unlike the Adobe Assistant.
-
Menu buttons without underline when hyperlinked
Can anyone help me with my menu buttons? I want to have a red text without underline, but they turn blue and underlined when I hyperlink them. What can I do to avoid the automatic formatting for hyperlinks? I have the menu buttons in a table in the l
-
If possible can i show todays date on my mac book pro screen?
if possible can i display todays date on my mac book pro's screen
-
Cant open itunes store.
error message says "connection timed out"
-
System Preferences 'Security & Privacy' Pane Automatically opens on login
I see there are a number of threads with System Preference pane problems in Mavericks - and while I've never had the problems other people are reporting with buttons not working, ever since installing Mavericks, the 'Security & Privacy' pane of my Sy