Ora-01031: Insufficient Privileges during 10g install on Suse 9.1
I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
I would really appreciate any help that any of you could provide. Thank you so much in advance.
-Daniel
I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
Thank you for helping me with this!
Similar Messages
-
ORA-01031: insufficient privileges during 8i to 9i upgrade
Hello,
I am following the Oracle 9i upgrade checklist Doc ID: 159657.1 to upgrade from 8.1.7.3 to 9.2.0.4.
In step 31, after setting the environment to new ORACLE_HOME, I am trying to start the 9.2.0.4 instance in migrate mode. This is the sequence of errors that I get.
Any help is greatly appreciated.
Thanks,
Rao
oracle>sqlplus /nolog
SQL*Plus: Release 9.2.0.4.0 - Production on Mon Aug 25 09:55:29 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01092: ORACLE instance terminated. Disconnection forced
SQL> startup migrate
ORA-01031: insufficient privileges
SQL> quit
Disconnected
oracle>You dont have enough privilege cause you were disconnected from the previous command you enter :
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01092: ORACLE instance terminated. Disconnection forced <= you are no longer logged here
Your problem is the ORA-24324, not a privilege problem.
Fred -
Help! ORA-01031: insufficient privileges during "startup migrate" 8i to 9i
Hello there,
I am following the Oracle 9i upgrade checklist Doc ID: 159657.1 to upgrade from 8.1.7.3 to 9.2.0.4.
In step 31, after setting the environment to new ORACLE_HOME, I am trying to start the 9.2.0.4 instance in migrate mode. This is the sequence of errors that I get.
Any help is greatly appreciated.
Thanks,
Rao
oracle>sqlplus /nolog
SQL*Plus: Release 9.2.0.4.0 - Production on Mon Aug 25 09:55:29 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01092: ORACLE instance terminated. Disconnection forced
SQL> startup migrate
ORA-01031: insufficient privileges
SQL> quit
Disconnected
oracle>bash-2.03$ env | sort
HOME=/home/oraclei
HOSTNAME=orafinprdrodb01
HOSTTYPE=sparc
HZ=
LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/ysm_finapps_legacy/ysm_data/d00/app/oraclei/prodidb/8.1.7/lib:/usr/dt/lib:/usr/openwin/lib
LOGNAME=oraclei
MACHTYPE=sparc-sun-solaris
MAIL=/var/mail/oraclei
NLS_DATE_FORMAT=DD-MON-RR
NLS_LANG=American_America.UTF8
NLS_NUMERIC_CHARACTERS=.,
NLS_SORT=binary
OLDPWD=/ysm_finapps_legacy/ysm_data/d00/app/oraclei/prodidb/8.1.7/rdbms
ORACLE_HOME=/ysm_finapps_legacy/ysm_data/d00/app/oraclei/prodidb/8.1.7
ORACLE_SID=PRODI
OSTYPE=solaris
PATH=/ysm_finapps_legacy/ysm_data/d00/app/oraclei/prodidb/8.1.7/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:
PWD=/ysm_finapps_legacy/ysm_data/d00/app/oraclei/prodidb/8.1.7/rdbms/lib
SHELL=/bin/sh
SHLVL=1
TERM=xterm
TNS_ADMIN=/ysm_finapps_legacy/ysm_data/d00/app/oraclei/prodidb/8.1.7/network/admin
TZ=US/Pacific
_=/usr/bin/env -
Ora-01031: Insufficient Privileges error during 10g install on Suse 9.1
I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
I would really appreciate any help that any of you could provide. Thank you so much in advance.
-DanielI'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
Thank you for helping me with this! -
Oracle Database 10g Express Edition (ORA-01031: insufficient privileges)
Hello,
I am new to 10g Express. I am working on Windows XP and I have Oracle App Server and JDev install on my box. I just installed 10g Express. When I try to connect to the database but I get the following error msg:
SQL> connect sys/admin as sysdba;
ERROR: ORA-01031: insufficient privileges
I am also not able to see the homepage either.
Can some please help.
Thanks
etnotAre you saying you can only have one instance of an
Oracle Database install if you are going to use
Oracle XE?Yes.
Oracle Database XE is free for usage with the following limitations:
Supports up to 4GB of user data (in addition to Oracle system data)
Single instance only of Oracle Database XE on any server
May be installed on a multiple CPU server, but only executes on one processor in any server
May be installed on a server with any amount of memory, but will only use up to 1GB RAM of available memory -
ORA-01031: insufficient privileges in oracle 10.2 in windows 2008r2
Dear All,
We have install SAP ecc6 EHP4 on oracle 10.2.0.5 on windows 2008R2
whenever we schedule any activity in db13 we are getting below error .
=================================
Job started
Step 001 started (program RSDBAJOB, variant &0000000000059, user ID PARESH)
Execute logical command BRBACKUP On host IRDAECCDEV
Parameters:-u / -jid FLL__20110922104226 -c force -t online -m full -p initieq_online.sap
BR0051I BRBACKUP 7.20 (3)
BR0055I Start of database backup: begvgwgh.fnf 2011-09-22 10.42.27
BR0484I BRBACKUP log file: K:\oracle\IEQ\sapbackup\begvgwgh.fnf
BR0280I BRBACKUP time stamp: 2011-09-22 10.42.28
BR0301E SQL error -1031 at location BrInitOraCreate-2, SQL statement:
'CONNECT / AT PROF_CONN IN SYSOPER MODE'
ORA-01031: insufficient privileges
BR0303E Determination of Oracle version failed
=================================
As per sap note 400421 i have carry out all the check and all are perfect.
Also i have check below notes and every thing are fine
Note 834917 - Oracle Database 10g: New database role SAPCONN
Note 1028220 - ORA-01031: Insufficient privileges despite SAPCONN role
Note 700548 - FAQ: Oracle authorizations
Also i have check the note which suggest to run the sapdba_role.sql script
But still i am getting the same error.
Also SAPSID services is running with user id sapserviceSID and i change it to SIDadm but no lock.
Request you please help me in this regard.
Sincerely
PareshAs expected
This is really a very small problem but very weird we suffered so many times. May be we should confirm the authorizations for SAPServiceSID and sidadm users on that windows host, sometimes we miss this part in Windows to check.
Kernel folders should be proper accessible by both of the users. Also, please keep SAP instance service via SAPServiceSID itself.
Just to reconfirm - you restarted SAP and restarted SAP/Oracle services as well, right ?
Thanks -
ORA-01031: insufficient privileges when connecting by SQL PLUS 8.0 with sys
From client, I use SQL PLUS 8.0 to connect to server: sys/password@MYDB1 as sysdba
The error always raises “ORA-01031: insufficient privileges”
I have done:
- Set: remote_login_passwordfile=exclusive in tnsname.ora file
- Uncomment: SQLNET.AUTHENTICATION_SERVICES in “sqlnet.ora” file
Also on this client:
to use SQL PLUS 8.0 to connect to server: manager/password@MYDB1. To connect normally
to use PLSQL Deverloper (it is the same oracle_home with SQL PLUS 8.0) to connect to database normally with user sys.
To use Enterprise manager console (it is other oracle_home with SQL PLUS 8.0) to connect to database normally with user sys
Please, help me to solve this troubleTHIS IS CONTENT OF SQLNET.ora CLIENT
# copyright (c) 1996 by the Oracle Corporation
# NAME
# sqlnet.ora
# FUNCTION
# Oracle Network Client startup parameter file example
# NOTES
# This file contains examples and instructions for defining all
# Oracle Network Client parameters. It should be possible to read
# this file and setup a Client by uncommenting parameter definitions
# and substituting values. The comments should provide enough
# explanation to enable a reasonable user to manage his TNS connections
# without having to resort to 'real' documentation.
# SECTIONS
# ONames Client
# Namesctl
# Native Naming Adpaters
# MODIFIED
# skanjila 06/06/97 - Correct default for Automatic_IPC
# eminer 05/15/97 - Add the relevant onrsd parameters.
# asriniva 04/23/97 - Merge with version from doc
# ggilchri 03/31/97 - mods
# bvasudev 02/07/97 - Change sqlnet.authentication_services documentation
# bvasudev 11/25/96 - Merge sqlnet.ora transport related parameters
# asriniva 11/12/96 - Revise with new OSS parameters.
# asriniva 11/05/96 - Add ANO parameters.
# - ONames Client ----------------------------------------------------
#names.default_domain = world
#Syntax: domain-name
#Default: NULL
# Indicates the domain from which the client most often requests names. When
# this parameter is set the default domain name (for example, US.ACME), the
# domain name will be automatically appended to any unqualified name in an
# ONAmes request (query, register, deregister, etc). Any name which contains
# an unescaped dot ('.') will not have the default domain appended. Simple
# names may be qualified with a trailing dot (for example 'rootserver.').
#names.initial_retry_timeout = 30
#Syntax: 1-600 seconds
#Default: 15 (OSD)
# Determines how long a client will wait for a response from a Names Server
# before reiterating the request to the next server in the preferred_servers
# list.
#names.max_open_connections = 3
#Syntax: 3-64
#Default: ADDRS in preferred_servers
# Determines how many connections an ONames client may have open at one time.
# Clients will ordinarily keep connections to servers open once they are
# established until the operation (or session in namesctl) is complete. A
# connection will be opened whenever needed, and if the maximum would be
# exceeded the least recently used connection will be closed.
#names.message_pool_start_size = 10
#Syntax: 3-256
#Default: 10
# Determines the initial number of messages allocated in the client's message
# pool. This pool provides the client with pre-allocated messages to be used
# for requests to ONames servers. Messages which are in the pool and unused
# may be reused. If a message is needed and no free messages are available in
# the pool more will be allocated.
#names.preferred_servers = (address_list =
# (address=(protocol=ipc)(key=n23))
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (address=(protocol=tcp)(host=cicada)(port=1575))
#Syntax: ADDR_LIST
#Default: Well-Known (OSD)
# Specifies a list of ONames servers in the client's region; requests will be
# sent to each ADDRESS in the list until a response is recieved, or the list
# (and number of retries) is exhausted.
# Addresses of the following form specify that messages to the ONames server
# should use Oracle Remote Operations (RPC):
# (description =
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (connect_data=(rpc=on))
#names.request_retries = 2
#Syntax: 1-5
#Default: 1
# Specifies the number of times the client should try each server in the list
# of preferred_servers before allowing the operation to fail.
#names.directory_path
#Syntax: <adapter-name>
#Default: TNSNAMES,ONAMES,HOSTNAME
# Sets the (ordered) list of naming adaptors to use in resolving a name.
# The default is as shown for 3.0.2 of sqlnet onwards. The default was
# (TNSNAMES, ONAMES) before that. The value can be presented without
# parentheses if only a single entry is being specified. The parameter is
# recognized from version 2.3.2 of sqlnet onward. Acceptable values include:
# TNSNAMES -- tnsnames.ora lookup
# ONAMES -- Oracle Names
# HOSTNAME -- use the hostname (or an alias of the hostname)
# NIS -- NIS (also known as "yp")
# CDS -- OSF DCE's Cell Directory Service
# NDS -- Novell's Netware Directory Service
# - Client Cache (ONRSD) ---------------------------------------------
names.addresses = (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Syntax: ADDR
Default: (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Address on which the client cache listens (is available to clients).
Any valid TNS address is allowed. The default should be used if at
all possible; clients have this entry hardwired as the first line
of their server-list file (sdns.ora). If the address is set to a
non-default value the client's preferred_servers parameter should
be set to include the client-cache address first.
names.authority_required = False
Syntax: T/F
Default: False
Determines whether system querys (for the root etc) require Authoritative
answers.
names.auto_refresh_expire = 259200
Syntax: Number of seconds, 60-1209600
Default: 259200
This is the amount of time (in seconds) the server will cache the addresses
of servers listed in server-list file (sdns.ora). When this time expires the
server will issue another query to the servers in those regions to refresh
the data.
names.auto_refresh_retry = 180
Syntax: Number of seconds, 60-3600
Default: sec. 180
This set how often the server will retry when the auto_refresh query fails.
names.cache_checkpoint_file = cache.ckp
Syntax: filename
Default: $ORACLE_HOME/network/names/ckpcch.ora
Specifies the name of the operating system file to which the Names Server
writes its foreign data cache.
names.cache_checkpoint_interval = 7200
Syntax: Number of seconds, 10-259200
Default: 0 (off)
Indicates the interval at which a Names Server writes a checkpoint of its
data cache to the checkpoint file.
names.default_forwarders=
(FORWARDER_LIST=
(FORWARDER=
(NAME= rootserv1.world)
(ADDRESS=(PROTOCOL=tcp)(PORT=42100)(HOST=roothost))))
Syntax: Name-Value/address_list
Default: NULL
A list (in NV form) of the addresses of other servers which should be used to
forward querys while in default_forwarder (slave) mode. NAME is the global
names for the server to which forwards whould be directed, and ADDRESS is its
address.
names.default_forwarders_only = True
Syntax: T/F
Default: False
When set to true this server will use the servers listed in default_forwarders
to forward all operations which involve data in foreign regions. Otherwise it
will use the servers defined in the server-list file (sdns.ora) in addition
to any defined in the default_forwarders parameter.
names.log_directory = /oracle/network/log
Syntax: directory
Default: $ORACLE_HOME/network/log
Indicates the name of the directory where the log file for Names Server
operational events are written.
names.log_file = names.log
Syntax: filename
Default: names.log
The name of the output file to which Names Server operational events are
written.
names.log_stats_interval = 3600
Syntax: Number of seconds, 10-ub4max
Default: sec. 0 (off)
Specifies the number of seconds between statistical entries in log file.
names.log_unique = False
Syntax: T/F
Default: False
If set to true the server will guarantee that the log file will have a unique
name which will not overwrite any existing files (note that log files are
appended to, so log information will not be lost if log_unique is not true).
names.max_open_connections = 10
Syntax: 3-64
Default: 10
Specifies the number of connections that the Names Server can have open at any
given time. The value is generated as the value 10 or the sum of one
connection for listening, five for clients, plus one for each foreign domain
defined in the local administrative region, whichever is greater. Any
operation which requires the server to open a network connection will use
an already open connection if it is available, or will open a connection
if not. Higher settings will save time and cost network resources; lower
settings save network resources, cost time.
names.max_reforwards = 2
Syntax: 1-15
Default: 2
The maximum number of times the server will attempt to forward a certain
operation.
names.message_pool_start_size = 24
Syntax: 3-256
Default: 10
Determines the initial number of messages allocated in the server's message
pool. This pool provides the server with pre-allocated messages to be used
for incoming or outgoing messages (forwards). Messages which are in the pool
and unused may be reused. If a message is needed and no free messages are
available in the pool more will be allocated.
names.no_modify_requests = False
Syntax: T/F
Default: False
If set to true, the server will refuse any operations which modify the
data in its region (it will still save foreign info in the cache which is
returned from foreign querys).
names.password = 625926683431AA55
Syntax: encrypted string
Default: NULL
If set the server will require that the user provide a password in his
namesctl session (either with sqlnet.ora:namesctl.server_password or 'set
password') in order to do 'sensitive' operations, like stop, restart, reload.
This parameter is generally set in encrypted form, so it can not be set
manually.
names.reset_stats_interval = 3600
Syntax: 10-ub4max
Default: 0 (off)
Specifies the number of seconds during which the statistics collected by the
Names Servers should accumulate. At the frequency specified, they are reset
to zero. The default value of 0 means never reset statistics.
names.trace_directory = /oracle/network/trace
Syntax: directory
Default: $ORACLE_HOME/network/trace
Indicates the name of the directory to which trace files from a Names Server
trace session are written.
names.trace_file = names.trc
Syntax: filename
Default: names.trc
Indicates the name of the output file from a Names Server trace session.
names.trace_func # NA
Syntax: T/F
Default: False
Internal mechanism to control tracing by function name.
names.trace_level = ADMIN
Syntax: T/F
Default: False
Syntax: {OFF,USER,ADMIN,0-16}
Default: OFF (0)
Indicates the level at which the Names Server is to be traced.
Available Values:
0 or OFF - No trace output
4 or USER - User trace information
10 or ADMIN - Administration trace information
16 or SUPPORT - WorldWide Customer Support trace information
names.trace_mask = (200,201,202,203,205,206,207)
Syntax: list of numbers
Default: NULL
Internal mechanism to control trace behavior.
names.trace_unique = True
Syntax: T/F
Default: False
Indicates whether each trace file has a unique name, allowing multiple trace
files to coexist. If the value is set to ON, a process identifier is appended
to the name of each trace file generated.
# - Namesctl ---------------------------------------------------------
#namesctl.trace_directory = /oracle/network/trace
#Syntax: directory
#Default: $ON/trace
# Indicates the name of the directory to which trace files from a namesctl
# trace session are written.
#namesctl.trace_file = namesctl.trc
#Syntax: filename
#Default: namesctl.trc
# Indicates the name of the output file from a namesctl trace session.
#namesctl.trace_func # NA
#Syntax: word list
#Default: NULL
# Internal mechanism to control tracing by function name.
#namesctl.trace_level = ADMIN
#Syntax: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
# Indicates the level at which the namesctl is to be traced.
# Available Values:
# 0 or OFF - No trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - WorldWide Customer Support trace information
#namesctl.trace_mask # NA
#Syntax: number list
#Default: NULL
# Internal mechanism to control trace behavior.
#namesctl.trace_unique = True
#Syntax: T/F
#Default: False
# Indicates whether each trace file has a unique name, allowing multiple trace
# files to coexist. If the value is set to ON, a process identifier is appended
# to the name of each trace file generated.
#namesctl.no_initial_server = False
#Syntax: T/F
#Default: False
# If set to TRUE namesctl will suppress any error messages when namesctl is
# unable to connect to a default names server.
#namesctl.internal_use = True
#Syntax: T/F
#Default: False
# If set to true namesctl will enable a set of internal undocumented commands.
# All internal commands are preceded by an underscore ('_') in order to
# distinguish them as internal. Without going into details, the commands
# enabled are:
# adddata createname deletename
# fullstatus ireplacedata newttlname
# pause remove_data renamename
# replacedata start walk*
# There are also a set of names server variables which may be set when
# namesctl is in internal mode:
# authorityrequired autorefresh*
# cachecheckpoint_interval cachedump
# defaultautorefresh_expire defaultautorefresh_retry
# defaultforwarders_only forwardingdesired
# maxreforwards modifyops_enabled
# nextcache_checkpoint nextcache_flush
# nextstat_log nextstat_reset
# reload request_delay
# restart shutdown
#namesctl.noconfirm = True
#Syntax: T/F
#Default: False
# When set to TRUE namesctl will suppress the confirmation prompt when
# sensitive operations (stop, restart, reload) are requested. This is
# quite helpful when using namesctl scripts.
#namesctl.server_password = mangler
#Syntax: string
#Default: NULL
# Automatically sets the password for the names server in order to perform
# sensitive operations (stop, restart, reload). The password may also be
# set manually during a namesctl session using 'set password'.
#namesctl.internal_encrypt_password = False
#Syntax: T/F
#Default: True
# When set to TRUE namesctl will not encrypt the password when it is sent to
# the names server. This would enable an unencrypted password to be set in
# names.ora:names.server_password
# - Native Naming Adpaters -------------------------------------------
#names.dce.prefix = /.:/subsys/oracle/names
#Syntax: DCE cell name
#Default: /.:/subsys/oracle/names
#Specifies the DCE cell (prefix) to use for name lookup.
#names.nds.name_context = personnel.acme
#Syntax: NDS name
#Default: (OSD?)
# Specifies the default NDS name context in which to look for the name to
# be resolved.
#names.nis.meta_map # NA
# Syntax: filename
# Default: sqlnet.maps
# Specifies the file to be used to map NIS attributes to an NIS mapname.
# Currently unused.
# - Advanced Networking Option Authentication Adapters ----------------
#sqlnet.authentication_services
# Syntax: A single value or a list from {beq, none, all, kerberos5,
# cybersafe, securid, identitx}
# Default: NONE
# Enables one or more authentication services. To enable
# authentication via the Oracle Security Server, use (beq, oss). If
# the Advanced Networking Option has been installed with Kerberos5
# support, using (beq, kerberos5) would enable authentication via
# Kerberos.
sqlnet.authentication_services=(beq, oss)
## Parmeters used with Kerberos adapter.
#sqlnet.kerberos5_cc_name
# Syntax: Any valid pathname.
# Default: /tmp/krb5cc_<uid>
# The Kerberos credential cache pathname.
#sqlnet.kerberos5_cc_name=/tmp/mycc
#sqlnet.kerberos5_clockskew
# Syntax: Any positive integer.
# Default: 300
# The acceptable difference in the number of seconds between when a
# credential was sent and when it was received.
#sqlnet.kerberos5_clockskew=600
#sqlnet.kerberos5_conf
# Syntax: Any valid pathname.
# Default: /krb5/krb.conf
# The Kerberos configuration pathname.
#sqlnet.kerberos5_conf=/tmp/mykrb.conf
#sqlnet.kerberos5_realms
# Syntax: Any valid pathname
# Default: /krb5/krb.realms
# The Kerberos host name to realm translation file.
#sqlnet.kerberos5_realms=/tmp/mykrb.realms
#sqlnet.kerberos5_keytab
# Syntax: Any valid pathname.
# Default: /etc/v5srvtab
# The Kerberos secret key file.
#sqlnet.kerberos5_keytab=/tmp/myv5srvtab
#sqlnet.authentication_kerberos5_service
# Syntax: Any string.
# Default: A default is not provided.
# The Kerberos service name.
#sqlnet.authentication_kerberos5_service=acme
## Parmeters used with CyberSAFE adapter.
#sqlnet.authentication_gssapi_service
# Syntax: A correctly formatted service principal string.
# Default: A default is not provided.
# The CyberSAFE service principal
#sqlnet.authentication_gssapi_service=acme/[email protected]
## Parmeters used with Identix adapter.
#sqlnet.identix_fingerprint_method
# Syntax: Must be oracle.
# Default: A default is not provided.
# The Identix authentication server method
#sqlnet.identix_fingerprint_method=oracle
#sqlnet.identix_fingerprint_database
# Syntax: Any string.
# Default: A default is not provided.
# The Identix authentication server TNS alias
#sqlnet.identix_fingerprint_database=ofm
#sqlnet.identix_fingerprint_database_user
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known username.
#sqlnet.identix_fingerprint_database_user=ofm_client
#sqlnet.identix_fingerprint_database_password
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known password.
#sqlnet.identix_fingerprint_database_password=ofm_client
# - Advanced Networking Option Network Security -------------------------
#sqlnet.crypto_checksum_client
#sqlnet.crypto_checksum_server
#sqlnet.encryption_client
#sqlnet.encryption_server
# These four parameters are used to specify whether a service (e.g.
# crypto-checksumming or encryption) should be active:
# Each of the above parameters defaults to ACCEPTED.
# Each of the above parameters can have one of four possible values:
# value meaning
# ACCEPTED The service will be active if the other side of the
# connection specifies "REQUESTED" or REQUIRED" and
# there is a compatible algorithm available on the other
# side; it will be inactive otherwise.
# REJECTED The service must not be active, and the connection
# will fail if the other side specifies "REQUIRED".
# REQUESTED The service will be active if the other side specifies
# "ACCEPTED", "REQUESTED", or "REQUIRED" and there is a
# compatible algorithm available on the other side; it
# will be inactive otherwise.
# REQUIRED The service must be active, and the connection will
# fail if the other side specifies "REJECTED" or if there
# is no compatible algorithm on the other side.
#sqlnet.crypto_checksum_types_client
#sqlnet.crypto_checksum_types_server
#sqlnet.encryption_types_client
#sqlnet.encryption_types_server
# These parameters control which algorithms will be made available for
# each service on each end of a connection:
# The value of each of these parameters can be either a parenthesized
# list of algorithm names separated by commas or a single algorithm
# name.
# Encryption types can be: RC4_40, RC4_56, RC4_128, DES, DES40
# Encryption defaults to all the algorithms.
# Crypto checksum types can be: MD5
# Crypto checksum defaults to MD5.
#sqlnet.crypto_seed ="4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf"
#sqlnet.crypto_checksum_server = required
#sqlnet.encryption_server = required
# - Oracle Security Server ---------------------------------------------
#oss.source.my_wallet
# Syntax: A properly formatted NLNV list.
# Default: Platform specific. Unix: $HOME/oracle/oss
# The method for retrieving and storing my identity.
#oss.source.my_wallet
# =(source
# =(method=file)
# (method_data=/dve/asriniva/oss/wallet)
#oss.source.location
# Syntax: A properly formatted NLNV list.
# Default: Oracle method, oracle_security_service/oracle_security_service@oss
# The method for retrieving encrypted private keys.
#oss.source.location
# =(source
# =(method=oracle)
# (method_data=
# (sqlnet_address=andreoss)
# - Sqlnet(v2.x) and Net3.0 Client ------------------------------------------
# In the following descriptions, the term "client program" could mean
# either sqlplus, svrmgrl or any other OCI programs written by users
#trace_level_client = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the client program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#trace_directory_client = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the client execution are written.
#Supported since: v2.0
#trace_file_client = /oracle/network/trace/cli.trc
#Possible values: Any valid file name
#Default: $ORACLE_HOME/network/trace/cli.trc ($ORACLE_HOME =
# /oracle at customer site)
#Purpose: Indicates the name of the file to which the execution trace
# of the client is written to.
#Supported since: v2.0
#trace_unique_client = ON
#Possible values: {ON, OFF}
#Default: OFF
#Purpose: Used to make each client trace file have a unique name to
# prevent each trace file from being overwritten by successive
# runs of the client program
#Supported since: v2.0
#log_directory_client = /oracle/network/log
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/log ($ORACLE_HOME = /oracle at customer
# site)
#Purpose: Indicates the name of the directory to which the client log file
# is written to.
#Supported since: v2.0
#log_file_client = /oracle/network/log/sqlnet.log
#Possible values: This is a default value, u cannot change this
#Default: $ORACLE_HOME/network/log/sqlnet.log ($ORACLE_HOME=/oracle in
# customer site)
#Purpose: Indicates the name of the log file from a client program
#Supported since: v2.0
#log_directory_server = /oracle/network/trace
#Possible values: Any valid diretcory path with write permission
#Default: $ORACLE_HOME/network/trace ( $ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which log files from the
# server are written
#Supported since: v2.0
#trace_directory_server = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network_trace ( $ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the server are written
#Supported since: v2.0
#trace_file_server = /orace/network/trace/svr_<pid>.trc
#Possible values: Any valid filename
#Default: $ORACLE_HOME/network/trace/svr_<pid>.trc where <pid? stands for
# the process id of the server on UNIX systems
#Purpose: Indicates the name of the file to which the execution trace of
# the server program is written to.
#Supported since: v2.0
#trace_level_server = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#use_dedicated_server = ON
#Possible values: {OFF,ON}
#Default: OFF
#Purpose: Forces the listener to spawn a dedicated server process for
# sessions from this client program.
#Supported since: v2.0
#use_cman = TRUE
#Possible values: {TRUE, FALSE}
#Default: FALSE
#Purpose:
#Supported since: v3.0
#tnsping.trace_directory = /oracle/network/trace
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the directory to which the execution trace from
# the tnsping program is to be written to.
#Supported since: v2.0
#tnsping.trace_level = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#sqlnet.expire_time = 10
#Possible values: 0-any valid positive integer! (in minutes)
#Default: 0 minutes
#Recommended value: 10 minutes
#Purpose: Indicates the time interval to send a probe to verify the
# client session is alive (this is used to reclaim watseful
# resources on a dead client)
#Supported since: v2.1
#sqlnet.client_registration = <unique_id>
#Possible values:
#Default: OFF
#Purpose: Sets a unique identifier for the client machine. This
# identifier is then passed to the listener with any connection
# request and will be included in the Audit Trail. The identifier
# can be any alphanumeric string up to 128 characters long.
#Supported since: v2.3.2
#bequeath_detach = YES
#Possible values: {YES,NO}
#Default: NO
#Purpose: Turns off signal handling on UNIX systems. If signal handling
# were not turned off and if client programs written by users make
# use of signal handling they could interfere with Sqlnet/Net3.
#Supported since: v2.3.3
#automatic_ipc = OFF
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: Force a session to use or not to use IPC addresses on the
# client's node.
#Supported since: v2.0
#disable_oob = ON
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: If the underlying transport protocol (TCP, DECnet,...) does
# not support Out-of-band breaks, then disable out-of-band
# breaks
#Supported since: v2.0
# -
Ora-01031 insufficient privileges oracle
Hi to all,
I have installed oracle 10g and created new database. When i try to create the simple view its showing the following error.
ora-01031 insufficient privileges oracle
Note: if i have logged thru admin user, i could able to create the view (system & manager). Though i have provide the grant permission i could not able to create the view, its asking for priviledges.
say create or replace view view_name as select * from employees;
Error: ora-01031 insufficient privileges oracle
Thanks in advanceHi,
You need the CREATE VIEW system privilege in order to create a view. This is in addition to SELECT privileges on the tables granted directly to you (not to some role you have). -
ORA-01031: insufficient privileges (Oracle 8.1.7.0)
Hi,
We are in the process of creating the test database (8.1.7.0) server on the new server machine having WINDOWS OS.
I have installed oracle software and created the default database along with setup and thus created the TEST database.
Listner is also working and also got connected to database server by login using "SYS@TEST as SYSDBA" user
But now, when i try to shutdown / startup the database it show the following error :
ORA-01031: insufficient privileges
Though i have logged in as sysdba, it is not allowing to do so.
Also checked the ROLES and PRIVILEGES for SYS and SYSTEM users.
Both users are having all the default roles and privileges that have been given automatically during database creation.
where is mistake done ???
With RegardsHi,
please check:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
# sqlnet.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
sqlnet.expire_time=2 -
ORA-01031: insufficient privileges - after upgrade from 2.1 to 3.0.1
Hi I installed 10g with APEX 2.1 and started working on an app. I had the privs needed to do all DDL.
I updated to 3.0.1 (not 3.1 because my work won't go to 3.1 yet)
I started working on the app not problem with DML but I tried to create a function and found ORA-01031: insufficient privileges
Did I miss running a script after the install? Is there a POST install?Here are the results from PL?SQL Developer:
select user from dual;
1 EDIUSER
select * from user_role_privs;
1 EDIUSER CONNECT NO YES NO
2 EDIUSER DBA NO YES NO
3 EDIUSER RESOURCE NO YES NO
select * from user_sys_privs;
1 EDIUSER UNLIMITED TABLESPACE NO
doesn't the roles give me all I need?
And as I said, in PL/SQL Developer I can do anything.
Here are the results from the APEX SQL Worksheet:
select user from dual;
ANONYMOUS
select * from user_role_privs;
EDIUSER CONNECT NO YES NO
EDIUSER DBA NO YES NO
EDIUSER RESOURCE NO YES NO
select * from user_sys_privs;
EDIUSER UNLIMITED TABLESPACE NO -
ORA-01031: insufficient privileges after changing group.
I installed oracle 10g with oracle:oinstall as owner and I was able to connect using "sqlplus / as sysdba".
But today I chaged owner of 10g software owner to oracle:dba.
Now when I am trying "sqlplus / as sysdba".
ERROR:
ORA-01031: insufficient privileges
But I am able to connect with "sqlplus sys/password as sysdba".
linux1:(oracle):DEV +-> id
uid=175(oracle) gid=115(dba) groups=115(dba)
What to do to have OS authen working?
ThanksMost probably this is what the user means :-
1. Installation was done with oracle:oinstall a year back.
oracle as the user and oinstall as the group owner.
At that time sqlplus "/ as sysdba" was working fine for him
2. He probably wanted his setting to be oracle:dba and he issued the following command:-
chown -R oracle:dba $ORACLE_HOME
Now the issue is that he cannot use sqlplus "/ as sysdba" however sqlplus sys/connpass works just fine.
He probably wants to know why his settings are not working now.
Have you read metalink for that error ORA-1031, there is a whole set of document available to diagonise this issue. -
ORA-01031: insufficient privileges in PL/SQL but not in SQL
I have problem with following situation.
I switched current schema to another one "ban", and selected 4 rows from "ed"
alter session set current_schema=ban;
SELECT * FROM ed.PS WHERE ROWNUM < 5;
the output is OK, and I get 4 rows like
ID_S ID_Z
1000152 1
1000153 1
1000154 1
1000155 1
but following procedure is compiled with warning
create or replace
procedure proc1
as
rowcnt int;
begin
select count(*) into rowcnt from ed.PS where rownum < 5;
end;
"Create procedure, executed in 0.031 sec."
5,29,PL/SQL: ORA-01031: insufficient privileges
5,2,PL/SQL: SQL Statement ignored
,,Total execution time 0.047 sec.
Could you help me why SELECT does work in SQL but not in PL/SQL procedure?
Thanks.
Message was edited by:
MattSkPrivs granted via a role are only valid from SQL - and not from/within stored PL/SQL code.
Quoting Tom's (from http://asktom.oracle.com) response to this:I did address this role thing in my book Expert one on one Oracle:
<quote>
What happens when we compile a Definer rights procedure
When we compile the procedure into the database, a couple of things happen with regards to
privileges. We will list them here briefly and then go into more detail:
q All of the objects the procedure statically accesses (anything not accessed via dynamic SQL)
are verified for existence. Names are resolved via the standard scoping rules as they apply to the
definer of the procedure.
q All of the objects it accesses are verified to ensure that the required access mode will be
available. That is, if an attempt to UPDATE T is made - Oracle will verify the definer or PUBLIC
has the ability to UPDATE T without use of any ROLES.
q A dependency between this procedure and the referenced objects is setup and maintained. If
this procedure SELECTS FROM T, then a dependency between T and this procedure is recorded
If, for example, I have a procedure P that attempted to 'SELECT * FROM T', the compiler will first
resolve T into a fully qualified referenced. T is an ambiguous name in the database - there may be
many T's to choose from. Oracle will follow its scoping rules to figure out what T really is, any
synonyms will be resolved to their base objects and the schema name will be associated with the
object as well. It does this name resolution using the rules for the currently logged in user (the
definer). That is, it will look for an object owned by this user called T and use that first (this
includes private synonyms), then it will look at public synonyms and try to find T and so on.
Once it determines exactly what T refers to - Oracle will determine if the mode in which we are
attempting to access T is permitted. In this case, if we as the definer of the procedure either
owns the object T or has been granted SELECT on T directly or PUBLIC was granted SELECT, the
procedure will compile. If we do not have access to an object called T by a direct grant - the
procedure P will fail compilation. So, when the object (the stored procedure that references T) is
compiled into the database, Oracle will do these checks - and if they "pass", Oracle will compile
the procedure, store the binary code for the procedure and set up a dependency between this
procedure and this object T. This dependency is used to invalidate the procedure later - in the
event something happens to T that necessitates the stored procedures recompilation. For example,
if at a later date - we REVOKE SELECT ON T from the owner of this stored procedure - Oracle will
mark all stored procedures this user has that are dependent on T, that refer to T, as INVALID. If
we ALTER T ADD some column, Oracle can invalidate all of the dependent procedures. This will cause
them to be recompiled automatically upon their next execution.
What is interesting to note is not only what is stored but what is not stored when we compile the
object. Oracle does not store the exact privilege that was used to get access to T. We only know
that procedure P is dependent on T. We do not know if the reason we were allowed to see T was due
to:
q A grant given to the definer of the procedure (grant select on T to user)
q A grant to public on T (grant select on T to public)
q The user having the SELECT ANY TABLE privilege
The reason it is interesting to note what is not stored is that a REVOKE of any of the above will
cause the procedure P to become invalid. If all three privileges were in place when the procedure
was compiled, a revoke of ANY of them will invalidate the procedure - forcing it to be recompiled
before it is executed again. Since all three privileges were in place when we created the procedure
- it will compile successfully (until we revoke all three that is). This recompilation will happen
automatically the next time that the procedure is executed.
Now that the procedure is compiled into the database and the dependencies are all setup, we can
execute the procedure and be assured that it knows what T is and that T is accessible. If something
happens to either the table T or to the set of base privileges available to the definer of this
procedure that might affect our ability to access T -- our procedure will become invalid and will
need to be recompiled.
This leads into why ROLES are not enabled during the compilation and execution of a stored
procedure in Definer rights mode. Oracle is not storing exactly WHY you are allowed to access T -
only that you are. Any change to your privileges that might cause access to T to go away will cause
the procedure to become invalid and necessitate its recompilation. Without roles - that means only
'REVOKE SELECT ANY TABLE' or 'REVOKE SELECT ON T' from the Definer account or from PUBLIC. With
roles - it greatly expands the number of times we would invalidate this procedure. If some role
that was granted to some role that was granted to this user was modified, this procedure might go
invalid, even if we did not rely on that privilege from that role. ROLES are designed to be very
fluid when compared to GRANTS given to users as far as privilege sets go. For a minute, let's say
that roles did give us privileges in stored objects. Now, most any time anything was revoked from
ANY ROLE we had, or any role any role we have has (and so on -- roles can and are granted to roles)
-- many of our objects would become invalid. Think about that, REVOKE some privilege from a ROLE
and suddenly your entire database must be recompiled! Consider the impact of revoking some system
privilege from a ROLE, it would be like doing that to PUBLIC is now, don't do it, just think about
it (if you do revoke some powerful system privilege from PUBLIC, do it on a test database). If
PUBLIC had been granted SELECT ANY TABLE, revoking that privilege would cause virtually every
procedure in the database to go invalid. If procedures relied on roles, virtually every procedure
in the database would constantly become invalid due to small changes in permissions. Since one of
the major benefits of procedures is the 'compile once, run many' model - this would be disastrous
for performance.
Also consider that roles may be
q Non-default: If I have a non-default role and I enable it and I compile a procedure that
relies on those privileges, when I log out I no longer have that role -- should my procedure become
invalid -- why? Why not? I could easily argue both sides.
q Password Protected: if someone changes the password on a ROLE, should everything that might
need that role be recompiled? I might be granted that role but not knowing the new password - I
can no longer enable it. Should the privileges still be available? Why or Why not? Again, arguing
either side of this is easy. There are cases for and against each.
The bottom line with respect to roles in procedures with Definer rights are:
q You have thousands or tens of thousands of end users. They don't create stored objects (they
should not). We need roles to manage these people. Roles are designed for these people (end users).
q You have far fewer application schema's (things that hold stored objects). For these we want
to be explicit as to exactly what privileges we need and why. In security terms this is called the
concept of 'least privileges', you want to specifically say what privilege you need and why you
need it. If you inherit lots of privileges from roles you cannot do that effectively. We can manage
to be explicit since the number of development schemas is SMALL (but the number of end users is
large)...
q Having the direct relationship between the definer and the procedure makes for a much more
efficient database. We recompile objects only when we need to, not when we might need to. It is a
large efficiency enhancement.
</quote> -
ORA-01031: insufficient privileges and shared memory realm does not exist
Hi all,
I came to a dead end to start oracle 10.2 database. I have searched on google and this forum, none of these solutions work for me. PS, I have installed 11g on my machine too.
I have set up ORACLE_SID,ORACLE_HOME to 10.2 database based on the tnsnames.ora.
follow is error message:
sqlplus sys as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 3 02:09:54 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 3 02:10:55 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
ERROR:
ORA-01031: insufficient privileges
SQL> conn scott/tiger
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
First I thought the instance has been start yet, but since I can't login with sysdba. I don't know what other options.
For 10.2, the tnsnames.ora
ORA102 =
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST =XXX)(PORT = 1523))+
+(CONNECT_DATA =+
+(SERVER = DEDICATED)+
+(SERVICE_NAME = ora102)+
+)+
+)+
LISTENER_ORA102 =
+(ADDRESS = (PROTOCOL = TCP)(HOST =XXX)(PORT = 1523))+
EXTPROC_CONNECTION_DATA =
+(DESCRIPTION =+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))+
+)+
+(CONNECT_DATA =+
+(SID = PLSExtProc)+
+(PRESENTATION = RO)+
+)+
+)+
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /data/oracle/ora102)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(ADDRESS = (PROTOCOL = TCP)(HOST =XXXXX)(PORT = 1523))
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)try do this steps on server side:
1) sqlplus sys as sysdba
2) select open_mode from v$database;
show result 2 step -
Error while Creating Master Repository: ORA-01031: insufficient Privileges
Hi,
I'm trying to install ODI into my VM.
I have done the installation and while creating Master Repository, I'm getting following error:
ORA-01031: insufficient Privileges
I'm using Oracle & have created user as ODI_MASTER with Admin Privileges.
I'll be using it to load metadata onto planning (Version 11.1.2)
Is there anything that I'm missing out on.
Jitendra.Seems missing grants on the user you are using to create Master Repository.
you are using Oracle .. grant connect, resource to <your_user>. These two rolesa have sufficient access to db to create the master repository.
execuute the sql from sys user
Regards,
Amit
Edited by: amitgupta1202 on 20 Aug, 2009 10:42 PM -
Logical standby: ORA-01031: insufficient privileges
Dear Colleagues,
Today in my Logical Standby don't apply archivelogs and I see an error in alert.log:
ORA-26808: Apply process AS01 died unexpectedly.
ORA-01031: insufficient privileges
Also I see next logs in trace files:
h4.
1)
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /ora/Ora11203
System name: Linux
Node name: base
Release: 2.6.18-308.20.1.el5
Version: #1 SMP Tue Nov 6 04:38:29 EST 2012
Machine: x86_64
Instance name: oracle
Redo thread mounted by this instance: 1
Oracle process number: 43
Unix process pid: 16634, image: oracle@base (AS01)
*** 2013-04-04 16:58:47.062
*** SESSION ID:(146.16811) 2013-04-04 16:58:47.062
*** CLIENT ID:() 2013-04-04 16:58:47.062
*** SERVICE NAME:(SYS$USERS) 2013-04-04 16:58:47.062
*** MODULE NAME:(Streams) 2013-04-04 16:58:47.062
*** ACTION NAME:( - Apply Server) 2013-04-04 16:58:47.062
knasplcr: eager error was not rolled back
++ LCR Dump Begin: 0x2b0cf2a6d168 - ddl
op: 5, Original op: 5, baseobjn: 0, objn: 0, objv: 0
DF: 0x00000002, DF2: 0x00000010, MF: 0x00020810, MF2: 0x00000000
PF: 0x00000000, PF2: 0x08000000
MergeFlag: 0x00, FilterFlag: 0x00
Id: 0, iotPrimaryKeyCount: 0, numChgRec: 1
NumCrSpilled: 0
RedoThread#: 1, rba: 0x0213d7.00023455.01ac
scn: 0x0002.fc0f8769, (scn: 0x0000.00000000, scn_sqn: 0, lcr_sqn: 0)xid: 0x0019.00e.0007f8d9, parentxid: 0x0019.00e.0007f8d9, proxyxid: 0x0000.000.00000000
ncol: 0 newcount: 24, oldcount: 0
LUBA: 0x4.1000ad1.e.0.0
++ LCR Dump Begin: 0x59b1afdc8 - commit
op: 7, Original op: 7, baseobjn: 0, objn: 0, objv: 0
DF: 0x00000002, DF2: 0x00000010, MF: 0x00220000, MF2: 0x02000000
PF: 0x00100000, PF2: 0x08040000
MergeFlag: 0x03, FilterFlag: 0x00
Id: 3, iotPrimaryKeyCount: 0, numChgRec: 0
NumCrSpilled: 0
RedoThread#: 1, rba: 0x0213d7.00023456.0108
scn: 0x0002.fc0f876b, (scn: 0x0002.fc0f876b, scn_sqn: 1, lcr_sqn: 1)xid: 0x0019.00e.0007f8d9, parentxid: 0x0019.00e.0007f8d9, proxyxid: 0x0000.000.00000000
ncol: 0 newcount: 0, oldcount: 0
LUBA: 0x4.1000ad1.e.0.0
Apply Slave is exiting due to error ORA-1031KSV 1031 error in slave process
*** 2013-04-04 16:58:47.067
ORA-01031: insufficient privileges
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-01031: insufficient privileges
h4.
2)
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /ora/Ora11203
System name: Linux
Node name: base
Release: 2.6.18-308.20.1.el5
Version: #1 SMP Tue Nov 6 04:38:29 EST 2012
Machine: x86_64
Instance name: oracle
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 16404, image: oracle@base (LSP0)
*** 2013-04-04 16:41:58.401
*** SESSION ID:(294.35251) 2013-04-04 16:41:58.401
*** CLIENT ID:() 2013-04-04 16:41:58.401
*** SERVICE NAME:(SYS$BACKGROUND) 2013-04-04 16:41:58.401
*** MODULE NAME:() 2013-04-04 16:41:58.401
*** ACTION NAME:() 2013-04-04 16:41:58.401
knahcapplymain: encountered error=26808
*** 2013-04-04 16:41:58.401
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=0, mask=0x0)
----- Error Stack Dump -----
ORA-26808: Apply process AS02 died unexpectedly.
ORA-01031: insufficient privileges
KNACDMP: *******************************************************
KNACDMP: Dumping apply coordinator's context at 25487cb0
KNACDMP: Apply Engine # 0
KNACDMP: Apply Engine name
KNACDMP: Coordinator's Watermarks ------------------------------
KNACDMP: Apply High Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Apply Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Recovery Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Fetch Low Watermark = 0002fc0f876b (SCN=0x0002.fc0f876b)
KNACDMP: Fetch Low Watermark Time = 811857327
KNACDMP: Oldest SCN = (SCN=0x0000.00000000)
KNACDMP: Oldest XID =
KNACDMP: Oldest Create Time = 0
KNACDMP: Last replicant syncpoint SCN = 0x0000.00000000
KNACDMP: Last syncpoint at primary SCN = 0x0002.fc0f875f
KNACDMP: First partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last processed = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Conservative pos = 0002fc0f8cb2 (SCN=0x0002.fc0f8cb2)
KNACDMP: Recovery start pos = (SCN=0x0000.00000000)
KNACDMP: Recovery high watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Spill LWM = (SCN=0x0000.00000000)
KNACDMP: Spill LWM Create Time = 0
KNACDMP: Coordinator's constants -------------------------------
KNACDMP: number of apply slaves = 5
KNACDMP: min number of apply slaves = 5
KNACDMP: max number of apply slaves = 5
KNACDMP: safety level (K) = 1
KNACDMP: max txns in memory = 400
KNACDMP: max constraints per table = 620
KNACDMP: hash table size (in entries) = 10000000
KNACDMP: Coordinator's intervals -------------------------------
KNACDMP: syncpoint interval (ms) = 0
KNACDMP: write low watermark interval(ms)= 1
KNACDMP: Coordinator's timers/counters -------------------------
KNACDMP: current time = 1365082918
KNACDMP: low watermark timer = 0
KNACDMP: syncpoint timer = 1365082918
KNACDMP: txnbufsize timer = 1365082220
KNACDMP: Coordinator's txn counts -------------------------
KNACDMP: total txns applied = 0
KNACDMP: number of unassigned comp txns = 0
KNACDMP: number of unassigned incomp txns= 0
KNACDMP: avg number of unassigned txns = 0.00
KNACDMP: total applied at last plwm write= 0
KNACDMP: apply prog. entries below plwm = 0
KNACDMP: total unassigned lcrs = 0
KNACDMP: Coordinator's State/Flags -----------------------------
KNACDMP: Coordinator's State = KNACST_APPLY_UNTIL_END
KNACDMP: Coordinator's Flags = 0x408004
KNACDMP: Slave counts ------------------------------------------
KNACDMP: number of reserved slaves = 0
KNACDMP: number of admin slaves = 0
KNACDMP: number of slaves in wait cmt = 1
KNACDMP: number of slaves suspended = 0
KNACDMP: number of safe slaves = 1
KNACDMP: avg number of idle slaves = 0.00
KNACDMP: number of slaves initializing = 0
KNACDMP: number of slaves terminating = 0
KNACDMP: Slave Lists -------------------------------------------
KNACDMP: Dumping All Slaves :-
Slave id = 0, State = 8, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 1, State = 9, Flags = 2, Assigned Xid = 0x001e.006.0005d213 1 txns 0 lcrs
Slave id = 2, State = 5, Flags = 1, Assigned Xid = 0x0019.00e.0007f8d9 1 txns 0 lcrs
Slave id = 3, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 4, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 5, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
KNACDMP: End dumping all slaves
KNACDMP: syncdep slaves = { }
KNACDMP: cont chunk slaves = { }
KNACDMP: cont slaves = { }
KNACDMP: exec txn slaves = { }
KNACDMP: Active slaves (2) = { 1 2 }
KNACDMP: Idle slaves (3) = { 3 4 5 }
KNACDMP: Txn Lists ---------------------------------------------
KNACDMP: Dumping all txns :-
XID = 0x001e.006.0005d213 Commit pos = 0002fc06718c (SCN=0x0002.fc06718c) State = 0
Lcr cnt = 0
Assigned to slavid = 1
Fetched chunks = 142
depslaves = { } wm depslaves = { }
XID = 0x0019.00e.0007f8d9 Commit pos = 0002fc0f876b (SCN=0x0002.fc0f876b) State = 1
Lcr cnt = 0
Assigned to slavid = 2
Fetched chunks = 1
depslaves = { } wm depslaves = { }
KNACDMP: End dumping all txns.
KNACDMP: Complete txns = { 0x0019.00e.0007f8d9 ** NO UNASS ** }
KNACDMP: Unassigned txns = { }
KNACDMP: *******************************************************
Warning: Apply error received: ORA-26714: User Error encountered during apply process. Clearing.
knahcapplymain: encountered error=26808
*** 2013-04-04 16:58:47.073
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=0, mask=0x0)
----- Error Stack Dump -----
ORA-26808: Apply process AS01 died unexpectedly.
ORA-01031: insufficient privileges
KNACDMP: *******************************************************
KNACDMP: Dumping apply coordinator's context at 25487cb0
KNACDMP: Apply Engine # 0
KNACDMP: Apply Engine name
KNACDMP: Coordinator's Watermarks ------------------------------
KNACDMP: Apply High Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Apply Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Recovery Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Fetch Low Watermark = 0002fc0f876b (SCN=0x0002.fc0f876b)
KNACDMP: Fetch Low Watermark Time = 811857327
KNACDMP: Oldest SCN = (SCN=0x0000.00000000)
KNACDMP: Oldest XID =
KNACDMP: Oldest Create Time = 0
KNACDMP: Last replicant syncpoint SCN = 0x0000.00000000
KNACDMP: Last syncpoint at primary SCN = 0x0002.fc0f875f
KNACDMP: First partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last processed = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Conservative pos = 0002fc0f8cb2 (SCN=0x0002.fc0f8cb2)
KNACDMP: Recovery start pos = (SCN=0x0000.00000000)
KNACDMP: Recovery high watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Spill LWM = (SCN=0x0000.00000000)
KNACDMP: Spill LWM Create Time = 0
KNACDMP: Coordinator's constants -------------------------------
KNACDMP: number of apply slaves = 5
KNACDMP: min number of apply slaves = 5
KNACDMP: max number of apply slaves = 5
KNACDMP: safety level (K) = 1
KNACDMP: max txns in memory = 400
KNACDMP: max constraints per table = 620
KNACDMP: hash table size (in entries) = 10000000
KNACDMP: Coordinator's intervals -------------------------------
KNACDMP: syncpoint interval (ms) = 0
KNACDMP: write low watermark interval(ms)= 1
KNACDMP: Coordinator's timers/counters -------------------------
KNACDMP: current time = 1365083926
KNACDMP: low watermark timer = 0
KNACDMP: syncpoint timer = 1365083926
KNACDMP: txnbufsize timer = 1365083218
KNACDMP: Coordinator's txn counts -------------------------
KNACDMP: total txns applied = 0
KNACDMP: number of unassigned comp txns = 0
KNACDMP: number of unassigned incomp txns= 1
KNACDMP: avg number of unassigned txns = 0.00
KNACDMP: total applied at last plwm write= 0
KNACDMP: apply prog. entries below plwm = 0
KNACDMP: total unassigned lcrs = 0
KNACDMP: Coordinator's State/Flags -----------------------------
KNACDMP: Coordinator's State = KNACST_APPLY_UNTIL_END
KNACDMP: Coordinator's Flags = 0x8204
KNACDMP: Slave counts ------------------------------------------
KNACDMP: number of reserved slaves = 0
KNACDMP: number of admin slaves = 0
KNACDMP: number of slaves in wait cmt = 0
KNACDMP: number of slaves suspended = 0
KNACDMP: number of safe slaves = 1
KNACDMP: avg number of idle slaves = 0.00
KNACDMP: number of slaves initializing = 0
KNACDMP: number of slaves terminating = 0
KNACDMP: Slave Lists -------------------------------------------
KNACDMP: Dumping All Slaves :-
Slave id = 0, State = 8, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 1, State = 5, Flags = 1, Assigned Xid = 0x0019.00e.0007f8d9 1 txns 0 lcrs
Slave id = 2, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 3, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 4, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 5, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
KNACDMP: End dumping all slaves
KNACDMP: syncdep slaves = { }
KNACDMP: cont chunk slaves = { }
KNACDMP: cont slaves = { }
KNACDMP: exec txn slaves = { }
KNACDMP: Active slaves (1) = { 1 }
KNACDMP: Idle slaves (4) = { 2 3 4 5 }
KNACDMP: Txn Lists ---------------------------------------------
KNACDMP: Dumping all txns :-
XID = 0x001e.006.0005d213 Commit pos = 0002fc06718c (SCN=0x0002.fc06718c) State = 0
Lcr cnt = 0
Not Assigned
Fetched chunks = 142
depslaves = { } wm depslaves = { }
XID = 0x0019.00e.0007f8d9 Commit pos = 0002fc0f876b (SCN=0x0002.fc0f876b) State = 1
Lcr cnt = 0
Assigned to slavid = 1
Fetched chunks = 1
depslaves = { } wm depslaves = { }
KNACDMP: End dumping all txns.
KNACDMP: Complete txns = { 0x0019.00e.0007f8d9 ** NO UNASS ** }
KNACDMP: Unassigned txns = { 0x001e.006.0005d213 }
KNACDMP: *******************************************************
*** 2013-04-04 16:58:47.513
Warning: Apply error received: ORA-26714: User Error encountered during apply process. Clearing.
I watched this link http://docs.oracle.com/cd/E11882_01/server.112/e17069/strms_trapply.htm#i1014714 and I checked grants of schemas owners. These grants identical as on Primary DB Server.
I don't know what I need to do. It's very critical Server. Please help me.So, my problem is solved very easy.
Logical Standby didn't work because I added grant SYSDBA to temporary user and revoked this grant at once and I didn't change orapwSID file on Logical Standby from Primary.
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#SBYDB00424Note:
Whenever you grant or revoke the SYSDBA or SYSOPER privileges or change the login password of a user who has these privileges, you must replace the password file at each physical or snapshot standby database in the configuration with a fresh copy of the password file from the primary database.
>
So, I deleted temporary user on Logical Standby and it solved the problem.
Thanks a lot to all who helped me!
Maybe you are looking for
-
If I lose the admin password to get into the GUI, how can I recover it?
I am stranded. I cannot log onto my acs server. It keeps bring a prompt," loin failed"
-
Activation of the Batch management check in the Material master
Dear All, Here I have one query Can we able to activate the Batch management check in the material master-->Purchaging view or not, if we have open or completed sales documents and deliveries for that materail. Reply ASAP Regards, Murali.
-
I am using a couple of Airport Expresses to stream music into different rooms. They are connected via ethernet. It works really well running from my PC and also the Remote App. I now want to add a third Airport Express into my living room to hook up
-
hi all i am attempting to run a large scheduling run of 3550 report instances. this is obviously going to take some time so is difficult to test within a decent time frame (3.5 days total - yes they are big) my problem is that some (20%) of the repor
-
Yahoo Push not working....I think.
Greetings all. Got a yahoo account. I send it mail. My Iphone does nothing...doesn't wake up or notify me. If I "wake" the phone, go to Yahoo Mail...hit refresh...then my phone gives me an alert right away. Yahoo site support has not been too helpful