ORA-01031 when connecting as sysdba after upgrading DB 10.2.0.1 to 10.2.0.3

Hello everyone
I have just finished upgrading my development database from 10.2.0.1.0 to 10.2.0.3.0. I have also upgraded my workstation client software to 10.2.0.3.0. Everything appears to be working fine except that I can no long access the new database "as sysdba" from my client computer. Each time I try to login using sys/password@mydb as sysdba I get an ORA-01031: Insufficient privileges error.
I have no problem connecting to the database using any other normal user. I can connect using "/ as sysdba" from the server console and I also have no problem accessing my production database -- which is still 10.2.0.1 using the 10.2.0.3 drivers. The server is running SLES9 while my workstation runs openSUSE 10.2.
Any help will be most welcome
Thanks in advance.
Thanassis.

Ensure you have your password file inatct (recreate it if necessary).
HTH,
cciontu.

Similar Messages

ORA-01031 WHEN CONNECTING TO AUXILIARY DATABASE

Hi
i am currently trying to to create a standby database using RMAN using the ORACLE RMAN Backup and recovery book.
I get the ORA-01031 when i connect to the auxiliary database.
i do the following:
RMAN> connect target sys/password@primary
connected to target
RMAN > connect auxiliary sys/password@aux1
ORA-01031.............insufficient privileges
obviously the database aux1 hasnt been created yet but i have configured the tns and listener and both work fine, also created a password file and created a pfile from the spfile in the primary database as instructed by the book. I also started the aux1 database in nomount mode as well.
does any one have any ideas where i maybe going wrong?
thanks

conn sys/pwd@aux1 as sysdba ,what happens to this
in sqlplus
add an entry to your TNSNAMES.ora
SQLNET.AUTHENTICATION_SERVICES = (NTS)
We dont need this entry this is for OS authenicarion sorry
then try again
Version and OS?
Message was edited by:
Maran Viswarayar
Message was edited by:
Maran Viswarayar

ORA-01031: when login as sysdba

We have Oracle 11.2 on Redhat 5.6. on the server box, I can login as sysdba by doing sqlplus / as sysdbaBut failed when I do sqlplus sys/****@cchdev as sysdba
ERROR:
ORA-01031: insufficient privileges or In sqlplus conn sys/****@cchdev as sysdba
ERROR:
ORA-01031: insufficient privilegesI suspect the password is wrong, then I changed password. But I got the same error when using new password.
I could login all three way above last time. WHat is wrong?

Here is the result od env|sort[oracle@cchORdev1 ~]$ env|sort
BI_CONFIG_DIR=/u01/app/obiee/server/Config
_=/bin/env
BI_OC4J_DIR=/u01/app/obiee/oc4j_bi
BI_RPD_DIR=/u01/app/obiee/server/Repository
CLASSPATH=/u01/app/oracle/product/11.2.0/dbhome_1/JRE:/u01/app/oracle/product/11.2.0/dbhome_1/jlib:/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/jlib
CVS_RSH=ssh
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=cchORdev1
INPUTRC=/etc/inputrc
KDEDIR=/usr
KDE_IS_PRELINKED=1
KDE_NO_IPV6=1
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
OBI_BASE=/u01/app/obiee/
OBI_PRESENTATION_CONFIG=/u01/app/obiee//web/config
ORA_ALERT_DIR=/var/oracle/diag/rdbms/cchdev/CCHDEV/trace
ORA_BI_HOME=/u01/app/obiee
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=cchdev
ORACLE_TERM=xterm
ORA_DUMP_DIR=/u05/oracle/dpdump
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/sbin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/dbhome_1/jdk/bin
PWD=/home/oracle
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=10.2.0.54 6032 22
SSH_CONNECTION=10.2.0.54 6032 10.2.0.200 22
SSH_TTY=/dev/pts/1
TERM=xterm
TMPDIR=/tmp
TMP=/tmp
TNS_ADMIN=/u01/app/oracle/product/11.2.0/dbhome_1/network/admin
USER=oracle
[oracle@cchORdev1 ~]$Edited by: user623617 on Apr 16, 2010 12:11 PM

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

How to fix connecting to iTunes after upgrading to ios6

How do I connect to iTunes after upgrade to ios6

iTunes on your computer or the iTunes store?
 Cheers, Tom

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

After installing MAWI error ORA-01031 when trying to connect as sysdba

I've installed mawi 2.18 on a brand new 10.2.0.5 ORACLE_HOME.
After installing the patch i cannot connect anymore to the database as sysdba: the error i got is:
ORA-01031: insufficient privileges
If i unset TWO_TASK (as stated in mawi install procedure) and replace it by ORACLE_SID it works.
What's the correct setup to handle both sysdba connection and MAWI setup ?
thanks
Chris

You could create two seperate env files. The EOF.env for TWO_TASK access and then another env file of yoru choice for SYSDBA access replacing TWO_TASK with ORACLE_SID and depending on whether you are using sysdba access or regular MW access you would execute the correct env file. I would also place the SYSDBA env file in the actual ORACLE_HOME directory.

11.2.0.1 :ORA-01031: insufficient privileges / as sysdba

Hi All,
I installed 11.2.0.1 $ORACLE_HOME in process of performing database upgrade in 11i applications environment.
Installation went successfully, while installing i have to select group name as "other" as it was not listing the dba group in installation screen. I manually changed the group to dba after Installation.
Now when im trying to login as /sysdba its getting error-ed out:
bash-3.00$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 5 08:53:35 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
- proper oracle home, sid, path is set
- listener is up and running
what could be the problem?
Thanks in advance for all you inputs.

Prathmesh wrote:
You do this by running the utility orapwd from a command line.
orapwd file=$ORACLE_HOME/dbs/orapwsid password=secure entries=5Dear Prathmesh "sqlplus / as sysdba" command do not use passwordfile or this is not password file authentication,this is OS authentication.Pls see http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref149

ORA-01031 when creating a view

Hi guys,
I transported a view(custom view ZVIEW) from Development to Production and found that the view was missing the database of the production system.
When i tried to create the same view usin SE14 am getting a warning
ORA-01031: insufficient privileges
DDL time(___1): .......119 milliseconds
The SQL statement was not executed
Statements for View ZVIEW_STD_TIME could not be executed
Request for ZVIEW_STD_TIME could not be executed
in the system the SAPR3 and OPS$PRDADM has sysdba privilege so i guess SYSCONN need not be implemented.
Please help.
Thanks and regards,
Siddhartha

Hi Rabi,
Check below sap notes.
Note 985607 - ORA-01031 Creating views after upgrade to Oracle 10g
Note 1028220 - ORA-01031: Insufficient privileges despite SAPCONN role
Regards
Ashok

Throwing error ORA- 01031 while connecting as sys, but not with system

Hi
we are having oracle 10g on one of the server. When I try to connect sqlplus "/as sysdba"..its throwing error
ORA- 01031: Insufficient privelege.
But when I tried login with sqlplus system@dbname its getting connected properly. whats the reason behind this? It was
working fine till yesterday.
Thanks
Shiyas M

The reason for this can partly be seen in your profile,
you have asked 17 questions, and 17 of them have been unresolved.
This isn't very likely,
so likely you are too lazy to label a question as answered.
Your laziness is also indicated by this question, which is a FAQ, and FAQs are most often asked, by people who
- don't read documentation
- don't use online resources
- don't search this forum
prior to asking their FAQ.
Your equation of SYS as SYSDBA and the SYSTEM account is also incorrect, as SYSTEM doesn't have SYSDBA privileges.
The ORA-1031 simply means someone somehow disabled OS authentication.
Now it is up to you to find out why.
Either by using online resources, or by reading documentation, and researching your own database.
Not by asking a FAQ and never marking any answer as correct.
Sybrand Bakker
Senior Oracle DBA

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

ORA-12560 when logging as SYSDBA in 11gR2 db installed in Windows 7

I have installed Oracle 11gR2 in Windows 7. I setup all listener and tnsname file and can login to the database like following:
sqlplus cisadm/cisadm@demo
However, it throws ORA-12560 error when loggin as sysdba as below:
sqlplus / as sysdba
I have read some previous post and already set ORACLE_SID=DEMO. But it still doesn't work.
I wonder if my 11gR2 was not installed properly as I also cannot use Administartion Assistant for Windows which throws "MMC could not create snap-in" error.

This because of previously installed database.
I feel that you have un installed but you have not completely removed Oracle Instances.
After the deinstall from Oracle Installer, Oracle leaves some services still running and some folders which wont be deleted .
You have to manually delete these folders.
Or follow these steps and try.
1) First step is to stop all the services relevant to Oracle database 11g. In windows 7 navigate from Start->Control Panel->Administrative Tools->Services
2) Click on Oracle Service OracleServiceORACLE_SID,OracleDBConsoleOracle_SID,OracleOraDB11g_homeTNSListener and Click on Link stop. Also stop these services if they are enabled - OracleMTSRecoveryService, OracleJobSchedulerOracle_SID
3) Now its time to remove references from Registry. In Windows 7 search box type regedit. This opens the Registry Editor
4) Click on HKEY_LOCAL_MACHINE. Click on Software. Choose Oracle Folder. Delete it completely. Also Remove HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services and remove oracle relevant entries from there (All will have either Oracle or Ora prefix)
5) Remove the PATH variable from environment variables if set
6) Delete the database files manually from the local machine
In this process of deleting files I got an error which said windows process WmiPrvSE.exe process makes use of certain dlls such as oracell11.dll,oraldapclnt11.dll etc. I renamed the bin folder to bin_old. I restarted the system and it fixed the issue
Regards,
Tirumala Dixit.

Getting ORA-01031 while connect target

Hi,
I'm trying to perform a rman duplictate.
I've created the orapwd file and setted the remote_login_passwordfile parameter as "EXCLUSIVE". I also have configured the connection to the target database on the tnsnames.ora file
I'm getting this error:
[server]> rman
RMAN> CONNECT TARGET system/iwjIGPE@TARGET_DB
RMAN-00571: ======================================
RMAN-00569: ==== ERROR MESSAGE STACK FOLLOWS ===========
RMAN-00571: ======================================
ORA-01031: insufficient privileges
RMAN> exit
Recovery Manager complete.
.... But I can connect remotely though sqlplus:
[server]> sqlplus system/iwjIGPE@TARGET_DB
SQL*Plus: Release 11.2.0.2.0 Production on Thu Sep 13 13:04:32 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
SQL> exit
thanks for your help!

Hi again!
I'm trying to follow the steps you propose:
[server]> rman target sys/c9vhLZT0@TARGET_DB auxiliary /
Recovery Manager: Release 11.2.0.2.0 - Production on Thu Sep 13 13:29:07 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===================================
RMAN-00569: === ERROR MESSAGE STACK FOLLOWS =========
RMAN-00571: ===============================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01017: invalid username/password; logon denied
I'm sure that the password is correct. I've re-created the password file and the error continues.
I'm still able to connect from sqlplus ...
[server]> echo $ORACLE_SID
AUX
[server]> sqlplus
SQL*Plus: Release 11.2.0.2.0 Production on Thu Sep 13 13:31:35 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: sys@TARGET_DB as sysdba
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
SQL >
I've granted the sysdba role to system:
SYS @ TARGET_DB > select * from v$pwfile_users;
USERNAME SYSDB SYSOP SYSAS
SYS TRUE TRUE FALSE
SYSTEM TRUE FALSE FALSE
I'm not able to connect either with sys not with system users
Thanks a lot
Edited by: user11978261 on Sep 13, 2012 4:41 AM

Cannot connect to shares after upgrade to Tiger

Hi,
I work at an IT company that manages both Macs and PCs. We just performed a site-wide upgrade for one of our clients from 10.3.9 to 10.4.6 (and on to 10.4.9).
We have 2 iBooks, a PowerMac, and 2 iMacs in an Active Directory setup. One of the iMacs already had a clean install of Tiger on it and it works fine, but the others have stopped connecting. I have since upgraded the desktops to 10.4.9, but the problem is still there.
Specifically, when connecting to any PC share (Win2000 and Win2003 server) using SMB, the Connect button will not respond. When browsing using the Finder, the computers are all listed (possibly cached from the previous installation?) but when I try to connect to them it says that their aliases are broken.
Also, the desktops have a simple logon Applescript that attempts to mount the server's public share (using 'mount volume'). This stopped working with an 'error -36' message after the upgrade, which I believe relates to there being network issues.
Any ideas?
iBook, PowerMac, iMac Mac OS X (10.4.9) Problem also occurs with 10.4.6

The server is actually 2003, with the desktops all being 2000. I went in to the local policy and I believe you're referencing these items -
Domain Controller Local Policy
Disabled - Domain member: Digitally encrypt or sign secure channel data (always)
Disabled - Domain member: Digitally encrypt secure channel data (when possible)
Disabled - Domain member: Digitally sign secure channel data (when possible)
Domain Local Policy
Not Defined - Domain member: Digitally encrypt or sign secure channel data (always)
Not Defined - Domain member: Digitally encrypt secure channel data (when possible)
Not Defined - Domain member: Digitally sign secure channel data (when possible)
Are these the correct items to change?
Also to note, we do have a fresh install of Tiger on an iMac and it's able to browse and connect to all shares on the network perfectly fine; it's just the upgraded Macs that are now encountering issues.

Can't connect to WIFI after upgrading to IOS 6

After upgrading to IOS6, my 4S stopped connecting any available wifi networks. It keep poping up "Unable to join the network "***" " when I tap any wifi spots I've been used so far. My problem is not like most people says. Instead of taking me the the apple website, mine doesn't even connected! This problem has been around for a week. I have to relay on 3G so far. I've tried resting the wifi setting, resting the iphone and even tried a lot of public wifi spots. It still doesn't work. Is it the problem of hardware? Help me, plz!

The solution lies in the router password encryption. There is the option WPA2 instead of current WPA/WPA2 on my router. I changed the setting to just WPA2 and it worked now. But the former option worked on iOS5.1.1. Thanks!
[Update]Turns out it is still unresolved. After the changing the encryption I restarted the router and it is still the luck I got before. The connection will not last long. Still unable to connect.

ORA-01031 when connecting as sysdba after upgrading DB 10.2.0.1 to 10.2.0.3

Similar Messages

Maybe you are looking for