Ora 01033 strange error

hi,
i think the database is crashed an when i try recover database
SQL> recover database
ORA-00283: recovery session canceled due to errors
ORA-00333: redo log read error block 8194 count 8192
when i try to connect it gives 01033 error.
would anyone suggest me

I did both your suggestions
First of all all clients are working properly till yesterday without any problem. Today I faced this problem in all clients around 10 clients same time. I feel it is may be Host machine database /network setting problem. How we can trace?
When I restart Listner using lsnrctl command in server , then I can connect from client using SQLplus but a while only. When I Establish another connection in the same client or from any other client, it won't allow me. Also , connected session getting error.
When I issue lsnrctl status command in server it is displaying like this. Maxnew is the one that have problem.
lsnrctl> status
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.0.0 - Produc
tion
Start Date 03-APR-2006 14:30:06
Uptime 0 days 0 hr. 17 min. 53 sec
Trace Level analysis
Security OFF
SNMP OFF
Listener Parameter File D:\oracle\ora81\network\admin\listener.ora
Listener Log File D:\oracle\ora81\network\log\listener.log
Listener Trace File D:\ORACLE\MAXNEW.TRC
Services Summary...
MAXNEW has 1 service handler(s)
maxnew has 3 service handler(s)
MAXPRD has 1 service handler(s)
MAXPRD has 2 service handler(s)
MAXTEST has 1 service handler(s)
MAXTEST has 1 service handler(s)
PLSExtProc has 1 service handler(s)
NBDDATA has 1 service handler(s)
nbddata has 1 service handler(s)
The command completed successfully
Please advise?
James
Message was edited by:
[email protected]

Similar Messages

Ora-12545 strange error

Dear friends
I have one strange error in Oracle 8.1.7 , Windows NT server. We have 4 databases in a same box. All are working fine till yesterday. Today morning I am facing this problem. I can not connect to one database out of four from any client. Getting error "ORA-12545: Connect failed because target host or object does not exist"
Other 3 databases in the same server I can connect from client.
In the server I can connect all four databases without any problem.
I am using tnsping <servicename> from the client, is getting OK.
I Observed the tnsnames.ora in the client , nothing found strange. Because all client machines have this problem.
Pleas advise?

I did both your suggestions
First of all all clients are working properly till yesterday without any problem. Today I faced this problem in all clients around 10 clients same time. I feel it is may be Host machine database /network setting problem. How we can trace?
When I restart Listner using lsnrctl command in server , then I can connect from client using SQLplus but a while only. When I Establish another connection in the same client or from any other client, it won't allow me. Also , connected session getting error.
When I issue lsnrctl status command in server it is displaying like this. Maxnew is the one that have problem.
lsnrctl> status
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.0.0 - Produc
tion
Start Date 03-APR-2006 14:30:06
Uptime 0 days 0 hr. 17 min. 53 sec
Trace Level analysis
Security OFF
SNMP OFF
Listener Parameter File D:\oracle\ora81\network\admin\listener.ora
Listener Log File D:\oracle\ora81\network\log\listener.log
Listener Trace File D:\ORACLE\MAXNEW.TRC
Services Summary...
MAXNEW has 1 service handler(s)
maxnew has 3 service handler(s)
MAXPRD has 1 service handler(s)
MAXPRD has 2 service handler(s)
MAXTEST has 1 service handler(s)
MAXTEST has 1 service handler(s)
PLSExtProc has 1 service handler(s)
NBDDATA has 1 service handler(s)
nbddata has 1 service handler(s)
The command completed successfully
Please advise?
James
Message was edited by:
[email protected]

Can not able to login in sql ERROR: ORA-01033

hi friends
im using oracle 10XE.. till y'day it was working fine.. sudden it shows the following error while connecting to sqlplus and also the home page of oracle is also not getting opened...
ORA-01033: ORACLE initialization or shutdown in progress
from past one week i was facing a small problme in WINXP so y'day i repaired my OS..
plzz help me out

this is the log..
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sga_target = 285212672
db_name = xe
PMON started with pid=2, OS id=524
PSP0 started with pid=3, OS id=376
MMAN started with pid=4, OS id=3364
DBW0 started with pid=5, OS id=728
LGWR started with pid=6, OS id=1340
CKPT started with pid=7, OS id=1256
SMON started with pid=8, OS id=436
RECO started with pid=9, OS id=1204
MMON started with pid=10, OS id=1088
MMNL started with pid=11, OS id=1092
Thu May 29 21:17:46 2008
Oracle Data Guard is not available in this edition of Oracle.
Thu May 29 21:18:09 2008
Shutting down instance: further logons disabled
Thu May 29 21:18:09 2008
Stopping background process MMNL
Thu May 29 21:18:09 2008
Stopping background process MMON
Thu May 29 21:18:10 2008
Shutting down instance (immediate)
License high water mark = 3
Thu May 29 21:18:10 2008
alter database close normal
ORA-1507 signalled during: alter database close normal...

Strange error while creating form/report pages [ORA-20001]

While creating two new pages with a form and report on it, I've got a strange error. I tried to create the pages several times, but I always got the same error:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create form on table. ORA-20001: Error creating shortcut id="" ORA-00001: unique constraint (FLOWS_030000.WWV_FLOW_SHORTCUT_IDX1) violated
Error creating query and update.
Return to application.
I'm using the wizard to get the pages, like I did many times before (without problems), but this time it will not work!
Greetings,
Jan

Below is a view or sql query i want to create in XE to show users report on startdate,end date,road name,etc,i am having a problem making this view work when i put the code in the sql script. Kindly help me with this if you can please. Thanks. CREATE OR REPLACE FORCE VIEW "RESULTS_DETAILS_VIEW" ("STARTDATE","ENDDATE","ROAD","NAME","STATUS","TYPE","UTILITIES","DATES","LUTON",
AS SELECT
d.Startdate,
d.EndDate,
l.Road,
u.Name,
ws.Status,
wt.Type,
cb.startdate,
cb.enddate,
cb.road,
cb.utility,
cb.type,
cb.status
FROM
Dates d,
Luton l,
Utilities u,
WorkStatus ws,
WorkType wt,
Comb cb
WHERE cb.startDate = d.StartDate
AND cb.endDate = d.EndDate
AND cb.road = l.Road
AND cb.utility = u.Name
AND cb.type = wt.Type
AND cb.status = ws.Status
WITH READ ONLY
/

ORA-01033 Error cannot be traced in the alert log or v$views

Hello There,
I'm hoping you can shed some light on what seems a rather odd occurrence on our Production Oracle Instance.
Before i elaborate on the nature of the problem, I must confess that i am not an Oracle DBA and have been compelled to post this query since i have no joy from the in house DBA community on the origins of this error.
We've had an ORA-01033 error being issued by our ETL installation (deployed on a Linux machine) a couple of days ago whence trying to extract some data from the Oracle instance (during overnight DataWarehouse loads) which has consequently aborted the loads necessitating a cleanup.
This event has already occurred twice before, the first time being a month ago when the event was captured in the v$instance (using the Startup time column where the timestamp corroborates to the first time we experienced this issue and also ackowledged by the DBA team) and also in the V$Dataguard_status.
Since then, This error has been generated twice although there seems to be no evidence of this in either the Oracle alert log(as confirmed by DBA team) or in any of the v$views (as pointed out by Tom in an earlier post) such as DBA_LOGSTDBY_HISTORY, v$logstdby_state, $logstdby_stats, dba_logstdby_log, dba_logstdby_events,v$dataguard_status, v$dataguard_stats, v$dataguard_config,v$database,v$database_incarnation, v$managed_standby, v$standby_log, v$instance. I searched these views since i suspected a latency issue during a failover which could be the reason for the
ORA-01033 but found nothing.
The DBA team have pretty much disowned this issue since they claim to not have any actual evidence of this from the logs and this is the crux of the matter here.
The Problem i have as the downstream "recepient" of this error is to prove to the DBA team that this is indeed a genuine issue with the Oracle instance affecting it's availability and concomittantly affecting the DW loads.
FYI, The Oracle instance is in Failover mode, so it's swiftly back online after bombing out for a few seconds.
Also, I don't have access to the Alert log as it's a Production environment and employs restricted access policy to the server.
Having said that, Is there anything else besides the obvious ORA errors that should be looked for in the Alert log?
Where else can ORA-01033 errors be traced/traced in the Dictionary besides the Alert Log?
Thoughts??
Regards

Thank You John for that query, but i'm on V10.2 and this view is relevant for 11g and beyond i believe.
Perhaps there is an equivalent for V10g?
I am also a bit bemused by the comment earlier about no trace being left behind if the DBA's performed a manual restart, surely it doesn't matter how the DB is restarted, the event is captured in the dictionary?
In the meantime, I've got a copy of the Alert log and have found redo log issues (DBWR/LGWR) very close to the time (a min after ORA-01033) of the shutdown event.
ALTER SYSTEM ARCHIVE LOG
Thread 1 cannot allocate new log, sequence 117732
Checkpoint not complete
I've looked into this a fair bit and this error apparently causes Oracle to suspend all processing on the database until the log switch is made.
Is this the causal link for my issue?
Does " suspend all processing on the database " actually translate into an actual ORA-01033 error (or some form of) when the ETL application is trying to connect to and extract data from the Oracle database at that time?
Edited by: shareeman on 16-Oct-2012 03:50

Manual\DGMGRL Switchover Standby ora-01033 error

I have created a standby server for my SAP application as a part of test Disaster Recovery scenario. I can see the redo logs getting applied from primary to standby. However when I manually switchover the roles i encounters ORA -01033 error at NEW PRIMARY server and logs are also not getting applied in this scenario.
When i again changes the roles it works fine. I am not sure what is cause of ORA -01033 error. Here are the detailed tnsnames.ora of both sites.
Primary Server
P11.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.0.1.104)
(PORT = 1527)
(CONNECT_DATA =
(SID = P11)
(GLOBAL_NAME = P11.WORLD)
TO_STANDBY.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.0.1.102)
(PORT = 1527)
(CONNECT_DATA =
(SID = P11)
(GLOBAL_NAME = TO_STANDBY.WORLD)
TO_PRIMARY.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.0.1.104)
(PORT = 1527)
(CONNECT_DATA =
(SID = P11)
(GLOBAL_NAME = TO_PRIMARY.WORLD)
LISTENER_P11.WORLD=(address=(protocol= tcp)(host=10.0.1.104)(port= 1527))
Standby Site
TO_PRIMARY.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.0.1.104)
(PORT = 1527)
(CONNECT_DATA =
(SID = P11)
(GLOBAL_NAME = TO_PRIMARY.WORLD)
P11.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.0.1.104)
(PORT = 1527)
(CONNECT_DATA =
(SID = P11)
(GLOBAL_NAME = P11.WORLD)
TO_STANDBY.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.0.1.102)
(PORT = 1527)
(CONNECT_DATA =
(SID = P11)
(GLOBAL_NAME = TO_STANDBY.WORLD)
LISTENER_P11.WORLD=(address=(protocol= tcp)(host=10.0.1.104)(port= 1527))
Now , when i enable the DGMGRL configuration and add standby database at primary the " log_archive_dest_2=''" goes empty . Here is the pfile of primary after enable of the DGMGRL.
pfile of Primary
*._B_TREE_BITMAP_PLANS=FALSE
*._IN_MEMORY_UNDO=FALSE
*._INDEX_JOIN_ENABLED=FALSE
*._OPTIM_PEEK_USER_BINDS=FALSE
*._OPTIMIZER_MJC_ENABLED=FALSE
*._SORT_ELIMINATION_COST_RATIO=10
*._TABLE_LOOKUP_PREFETCH_SIZE=0
*.archive_lag_target=0
*.background_dump_dest='D:\oracle\P11\saptrace\background'
*.compatible='10.2.0'
*.control_file_record_keep_time=30
*.control_files='D:\oracle\P11\origlogA\cntrl\cntrlP11.dbf','D:\oracle\P11\origlogB\cntrl\cntrlP11.dbf','D:\oracle\P11\sapdata1\cntrl\cntrlP11.dbf'
*.core_dump_dest='D:\oracle\P11\saptrace\background'
*.db_block_size=8192
*.db_cache_size=260938137
*.db_files=254
*.db_name='P11'
*.db_unique_name='P11_primary'
*.dg_broker_start=TRUE
*.dml_locks=4000
*.event='10191 trace name context forever, level 1'
*.FAL_Client='to_primary'
*.FAL_Server='to_standby'
*.FILESYSTEMIO_OPTIONS='setall'
*.job_queue_processes=1
*.log_archive_config='nodg_config'
*.log_archive_dest_1='LOCATION=C:\oracle\P11\oraarch\P11arch VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=P11_primary'
p11.log_archive_dest_1='location="C:\oracle\P11\oraarch\P11arch"','valid_for=(ONLINE_LOGFILE,ALL_ROLES)'
*.log_archive_dest_2=''
*.log_archive_dest_state_1='enable'
p11.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
p11.log_archive_format='ARC%S_%R.%T'
*.log_archive_max_processes=10
*.log_archive_min_succeed_dest=1
p11.log_archive_trace=0
*.log_buffer=1048576
*.log_checkpoint_interval=0
*.log_checkpoints_to_alert=true
*.open_cursors=800
*.parallel_execution_message_size=16384
*.pga_aggregate_target=347917516
*.processes=80
*.query_rewrite_enabled='false'
*.recyclebin='off'
*.remote_login_passwordfile='exclusive'
*.remote_os_authent=true
*.replication_dependency_tracking=false
*.sessions=96
*.sga_max_size=521876275
*.shared_pool_reserved_size=26093813
*.shared_pool_size=300938137
*.sort_area_retained_size=0
*.sort_area_size=2097152
p11.standby_archive_dest=''
*.standby_file_management='AUTO'
*.star_transformation_enabled='true'
*.undo_management='AUTO'
*.undo_retention=43200
*.undo_tablespace='PSAPUNDO'
*.user_dump_dest='D:\oracle\P11\saptrace\usertrace'
pfile of standy DB
*._B_TREE_BITMAP_PLANS=FALSE
*._IN_MEMORY_UNDO=FALSE
*._INDEX_JOIN_ENABLED=FALSE
*._OPTIM_PEEK_USER_BINDS=FALSE
*._OPTIMIZER_MJC_ENABLED=FALSE
*._SORT_ELIMINATION_COST_RATIO=10
*._TABLE_LOOKUP_PREFETCH_SIZE=0
*.background_dump_dest='D:\oracle\P11\saptrace\background'
*.compatible='10.2.0'
*.control_file_record_keep_time=30
*.control_files='D:\oracle\P11\origlogA\cntrl\control01.ctl','D:\oracle\P11\origlogB\cntrl\control02.ctl','D:\oracle\P11\sapdata1\cntrl\control03.ctl'
*.core_dump_dest='D:\oracle\P11\saptrace\background'
*.db_block_size=8192
*.db_cache_size=155870822
*.db_files=254
*.db_name='P11'
*.db_unique_name='P11_disaster'
*.dg_broker_start=TRUE
*.dml_locks=4000
*.event='10191 trace name context forever, level 1'
*.FAL_Client='to_standby'
*.FAL_Server='to_primary'
*.FILESYSTEMIO_OPTIONS='setall'
*.job_queue_processes=1
*.log_archive_config='DG_CONFIG= (P11_primary, P11_disaster)'
*.log_archive_dest_1='LOCATION=C:\oracle\P11\oraarch\P11arch VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=P11_disaster'
*.log_archive_dest_2='SERVICE=to_primary LGWR ASYNC DELAY=5 VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=P11_primary'
*.log_archive_dest_state_1='enable'
*.log_archive_dest_state_2='enable'
*.log_archive_max_processes=10
*.log_buffer=1048576
*.log_checkpoint_interval=0
*.log_checkpoints_to_alert=true
*.open_cursors=800
*.parallel_execution_message_size=16384
*.pga_aggregate_target=207827763
*.processes=80
*.query_rewrite_enabled='false'
*.recyclebin='off'
*.remote_login_passwordfile='exclusive'
*.remote_os_authent=true
*.replication_dependency_tracking=false
*.sessions=96
*.sga_max_size=311741644
*.shared_pool_reserved_size=15587082
*.shared_pool_size=300870822
*.sort_area_retained_size=0
*.sort_area_size=2097152
*.standby_file_management='AUTO'
*.star_transformation_enabled='true'
*.undo_management='AUTO'
*.undo_retention=43200
*.undo_tablespace='PSAPUNDO'
*.user_dump_dest='D:\oracle\P11\saptrace\usertrace'
Here are the alert logs of primary DB.
LTER SYSTEM SET log_archive_dest_2='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=PROD102)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=p11_disaster_XPT)(INSTANCE_NAME=p11)(SERVER=dedicated)))"',' ARCH SYNC NOAFFIRM delay=5 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="p11_disaster" register net_timeout=180 valid_for=(online_logfile,primary_role)' SCOPE=BOTH;
Sat Jul 02 16:29:22 2011
ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
Sat Jul 02 16:29:22 2011
ALTER SYSTEM SET log_archive_trace=0 SCOPE=BOTH SID='p11';
Sat Jul 02 16:29:22 2011
ALTER SYSTEM SET log_archive_format='ARC%S_%R.%T' SCOPE=SPFILE SID='p11';
Sat Jul 02 16:29:22 2011
ALTER SYSTEM SET standby_archive_dest='' SCOPE=BOTH SID='p11';
Sat Jul 02 16:29:22 2011
ALTER SYSTEM SET log_archive_dest_1='location="C:\oracle\P11\oraarch\P11arch"','valid_for=(ONLINE_LOGFILE,ALL_ROLES)' SCOPE=BOTH SID='p11';
Sat Jul 02 16:29:23 2011
ALTER SYSTEM SET log_archive_dest_state_1='ENABLE' SCOPE=BOTH SID='p11';
Sat Jul 02 16:29:23 2011
ALTER SYSTEM SET standby_file_management='AUTO' SCOPE=BOTH SID='*';
Sat Jul 02 16:29:23 2011
ALTER SYSTEM SET archive_lag_target=0 SCOPE=BOTH SID='*';
Sat Jul 02 16:29:23 2011
ALTER SYSTEM SET log_archive_max_processes=10 SCOPE=BOTH SID='*';
Sat Jul 02 16:29:23 2011
ALTER SYSTEM SET log_archive_min_succeed_dest=1 SCOPE=BOTH SID='*';
Sat Jul 02 16:29:27 2011
Beginning log switch checkpoint up to RBA [0x3b7.2.10], SCN: 7939485
Thread 1 advanced to log sequence 951
Current log# 4 seq# 951 mem# 0: D:\ORACLE\P11\ORIGLOGB\LOG_G14M1.DBF
Current log# 4 seq# 951 mem# 1: C:\ORACLE\P11\MIRRLOGB\LOG_G14M2.DBF
Sat Jul 02 16:29:28 2011
ALTER SYSTEM SET log_archive_dest_2='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=PROD102)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=p11_disaster_XPT)(INSTANCE_NAME=p11)(SERVER=dedicated)))"',' ARCH SYNC NOAFFIRM delay=5 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="p11_disaster" register net_timeout=180 valid_for=(online_logfile,primary_role)' SCOPE=BOTH;
Sat Jul 02 16:29:28 2011
ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
Beginning log switch checkpoint up to RBA [0x3b8.2.10], SCN: 7939487
Thread 1 advanced to log sequence 952
Current log# 2 seq# 952 mem# 0: D:\ORACLE\P11\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 952 mem# 1: C:\ORACLE\P11\MIRRLOGB\LOG_G12M2.DBF
Sat Jul 02 16:29:29 2011
Error 12541 received logging on to the standby
Check whether the listener is up and running.
Sat Jul 02 16:29:29 2011
Errors in file d:\oracle\p11\saptrace\background\p11_arc1_2396.trc:
ORA-12541: TNS:no listener
FAL[server, ARC1]: Error 12541 creating remote archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=PROD102)(PORT=1521)))(CONNECT_DATA=
Here is the Alert log of standby
RFS[2]: Identified database type as 'physical standby'
Sat Jul 02 16:21:00 2011
RFS[3]: Assigned to RFS process 1620
RFS[3]: Identified database type as 'physical standby'
Sat Jul 02 16:21:00 2011
RFS[2]: Archived Log: 'C:\ORACLE\P11\ORAARCH\P11ARCH\ARC00947_0755040789.001'
Sat Jul 02 16:21:00 2011
RFS[3]: Archived Log: 'C:\ORACLE\P11\ORAARCH\P11ARCH\ARC00948_0755040789.001'
Sat Jul 02 16:21:00 2011
Media Recovery Log C:\ORACLE\P11\ORAARCH\P11ARCH\ARC00947_0755040789.001
Identified End-Of-Redo for thread 1 sequence 947
Sat Jul 02 16:21:01 2011
Media Recovery End-Of-Redo indicator encountered
Sat Jul 02 16:21:01 2011
Media Recovery Applied until change 7934481
Media Recovery archivelogs detected beyond End-Of-REDO
Resetting standby activation ID 1369083708 (0x519a8f3c)
Completed: Alter Database Recover Managed Standby Database
Sat Jul 02 16:21:29 2011
Alter Database Recover Managed Standby Database Disconnect
MRP0 started with pid=28, OS id=996
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 2 processes
Clearing online redo logfile 1 D:\ORACLE\P11\ORIGLOGA\LOG_G11M1.DBF
Clearing online log 1 of thread 1 sequence number 949
Sat Jul 02 16:21:36 2011
Completed: Alter Database Recover Managed Standby Database Disconnect
Sat Jul 02 16:21:37 2011
Clearing online redo logfile 1 complete
Clearing online redo logfile 2 D:\ORACLE\P11\ORIGLOGB\LOG_G12M1.DBF
Clearing online log 2 of thread 1 sequence number 946
Clearing online redo logfile 2 complete
Clearing online redo logfile 3 D:\ORACLE\P11\ORIGLOGA\LOG_G13M1.DBF
Clearing online log 3 of thread 1 sequence number 944
Clearing online redo logfile 3 complete
Clearing online redo logfile 4 D:\ORACLE\P11\ORIGLOGB\LOG_G14M1.DBF
Clearing online log 4 of thread 1 sequence number 945
Clearing online redo logfile 4 complete
Media Recovery Log C:\ORACLE\P11\ORAARCH\P11ARCH\ARC00948_0755040789.001
Media Recovery Waiting for thread 1 sequence 949
Sat Jul 02 16:22:37 2011
RFS[1]: No standby redo logfiles created
RFS[1]: Archived Log: 'C:\ORACLE\P11\ORAARCH\P11ARCH\ARC00949_0755040789.001'
Sat Jul 02 16:22:37 2011
RFS[1]: Archive log thread 1 sequence 949 available in 5 minute(s)
Sat Jul 02 16:22:37 2011
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 2200
RFS[4]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[4]: No standby redo logfiles created
Sat Jul 02 16:22:38 2011
Media Recovery Delayed for 5 minute(s) (thread 1 sequence 949)
Sat Jul 02 16:27:38 2011
Media Recovery Log C:\ORACLE\P11\ORAARCH\P11ARCH\ARC00949_0755040789.001
Media Recovery Waiting for thread 1 sequence 950 (in transit)
Sat Jul 02 16:29:42 2011
RFS[4]: Possible network disconnect with primary database
Aborting archivelog file creation: C:\ORACLE\P11\ORAARCH\P11ARCH\ARC00950_0755040789.001
If this a network disconnect, then this archivelog will be fetched again
by GAP resolution mechanism.
Please advice as i am not sure of i have created something in listener file for DGMGRL configuration..
Regards

DGMGRL> show configuration
Configuration
Name: my_dg
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
P11_primary - Primary database
P11_disaster - Physical standby database
Current status for "my_dg":
Warning: ORA-16607: one or more databases have failed
DGMGRL> SHOW DATABASE 'P11_primary' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
p11 ERROR ORA-16737: the redo transport service for standby database "P11_disaster" has an error
p11 WARNING ORA-16715: redo transport-related property LogXptMode of standby database "P11_disaster" is inconsistent
DGMGRL> SHOW DATABASE 'P11_primary' 'LogXptStatus';
LOG TRANSPORT STATUS
PRIMARY_INSTANCE_NAME STANDBY_DATABASE_NAME STATUS
p11 P11_disaster ORA-12541: TNS:no listener
After this when i check the status of listener at P11_disaster site it was up . I restarted the listener and found following message in listener log at standby ( p11_primary) . These are the last lines of listener log.
03-JUL-2011 13:36:40 * (CONNECT_DATA=(SID=P11)(GLOBAL_NAME=TO_STANDBY.WORLD)(CID=(PROGRAM=d:\oracle\p11\102\bin\ORACLE.EXE)(HOST=PROD104)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.1.104)(PORT=2244)) * establish * P11 * 0
03-JUL-2011 13:36:40 * (CONNECT_DATA=(SID=P11)(GLOBAL_NAME=TO_STANDBY.WORLD)(CID=(PROGRAM=d:\oracle\p11\102\bin\ORACLE.EXE)(HOST=PROD104)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.1.104)(PORT=2245)) * establish * P11 * 0
03-JUL-2011 13:45:25 * ping * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\P11.WORLDipc)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\P11ipc)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.0.1.102)(PORT=1527)))
Listener completed notification to CRS on stop
03-JUL-2011 13:45:34 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=p11adm))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869824)) * stop * 0
TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production on 03-JUL-2011 13:45:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is D:\oracle\P11\102\network\admin\listener.ora
Log messages written to D:\oracle\P11\102\network\log\listener.log
Trace information written to D:\oracle\P11\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=624
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\P11.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\P11ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.0.1.102)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
03-JUL-2011 13:45:46 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=p11adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869824)) * status * 0
I am sure this is some configuration issue , however does not have clue :(

Error 12528, instance BLOCKED, and ORA-01033 error

I'm a student, just getting started with Oracle, and my teacher is not very helpful with the install/running problems that I'm having with Oracle.
I installed Oracle 11g Express a week ago, and upon installing it, the software worked just fine. I was able to create connections and write basic select statements to get data from a database provided by the manufacturer of my textbook.
Now, when I try to connect to the database, I get an error that says "ORA_12528, TNS:listener: all appropriate instances are blocking new connections."
I did a little research on how to fix this, and got into the listener to see its status. Here's what it says:
LSNRCTL> status
Connection to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 28-MAR_2012 09:45:21
Uptime 0 days 0 hr. 21 min. 19 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\PC325862970629\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PC325862970629)(PORT=1521)
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance"xe", status BLOCKED, has 1 handler(s) for this service...
This command completed successfully
LSNRCTL>
I also looked at the Listener Log File (although most of what I saw makes no sense to me, and it was pretty long)... here's what appears to be the last chunk of the log file:
<msg time='2012-03-28T09:45:23.468-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-03-28T09:45:23.484-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-03-28T09:46:01.203-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PC325862970629)(PORT=1521)))
</txt>
</msg>
<msg time='2012-03-28T09:46:01.218-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 09:46:01 * service_register * xe * 0
</txt>
</msg>
<msg time='2012-03-28T09:46:02.796-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 09:46:02 * service_update * xe * 0
</txt>
</msg>
<msg time='2012-03-28T09:49:38.250-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 09:49:38 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=SQL Developer)(HOST=__jdbc__)(USER=Admin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1047)) * establish * xe * 12528
</txt>
</msg>
<msg time='2012-03-28T09:49:38.750-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>TNS-12528: TNS:listener: all appropriate instances are blocking new connections
</txt>
</msg>
<msg time='2012-03-28T09:56:04.218-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 09:56:04 * service_update * xe * 0
</txt>
</msg>
<msg time='2012-03-28T10:05:35.343-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 10:05:35 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=SQL Developer)(HOST=__jdbc__)(USER=Admin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1147)) * establish * xe * 12528
</txt>
</msg>
<msg time='2012-03-28T10:05:35.812-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>TNS-12528: TNS:listener: all appropriate instances are blocking new connections
</txt>
</msg>
<msg time='2012-03-28T10:06:40.453-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 10:06:40 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Admin))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-03-28T10:26:03.890-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 10:26:03 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Admin))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-03-28T10:26:14.968-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>28-MAR-2012 10:26:14 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=SQL Developer)(HOST=__jdbc__)(USER=Admin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1164)) * establish * xe * 12528
</txt>
</msg>
<msg time='2012-03-28T10:26:15.062-07:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='PC325862970629'
host_addr='10.10.10.10'>
<txt>TNS-12528: TNS:listener: all appropriate instances are blocking new connections
</txt>
</msg>
After doing more googling, I found someone suggested that logging on to SQL*Plus as sysdba and then shutting down and restarting the database might do something to fix this, but when I try to log in it doesn't work... here's what I see in SQL*Plus:
SQL> connect / as sysdba
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
OSD-196787312: Message 196787312 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) The event log file is full.
ORA-01075: you are currently logged on
SQL> connect
Enter User0name: sysdba
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Process ID: 0
Session ID: 0 Serial number: 0
SQL>
I have no idea what's going on here, and unfortunately, since I'm a student and have just started with Oracle, I can't seem to make heads or tails of most of what I'm finding on the forums here (and most of the threads that seem pertinent are 6 or more years old).
If anyone out there can help me, I'd greatly appreciate it! Thanks in advance!
--Kate

Srini -
I did take a look at the link you posted and I tried to do what it said, but I don't really know what to make of what I found. When I run services.msc I find the following are running:
OracleJobSchedulerXE, OracleMTSRecoveryService, OracleServiceXE, OraclexEClrAgent, and OracleXETNSLisnener
So it appears that the Oracle Service is running... probably not the problem.
With regards to the logs, I don't know how to do what you suggested (make the log bigger, allow for overwrites, etc.).
I tried to follow the suggestions from the link you posted and get into the event viewer, but when I enter "eventviewer" in the run window my machine can't find it. I tried other methods I found online to get into the event viewer, but it appears as though my computer doesn't offer me access to it (or simply doesn't have that capability). Are there other ways to clear old logs? Can I just open it as a text file and delete the contents? I don't want to make a mess out of things, and I really don't know what I'm doing so any guidance would be appreciated.
Thanks!
--Kate

Errors-Ora-01157,ORA-01110,ORA-01033

HI all,
i am unable to login into database,i will explain clearly what has happened,please help me out...my /home directory was 100%,so i was unable to login,what i have did is i have not deleted
archive files but i have moved to other directory /ora_bkp,then i was able to login,today i have rebboted the system and later i have started database,started listener,but when i try to login
through sql*plus or toad i am getting this error.....ORA-01033 (ORACLE INITIALIZATION OR SHUTDOWN IN PROGRESS),and when i have tried to check from sql promt ....i am getting this
error....ORA-01157(CANNOT IDENTIFY/LOCK DATAFILE 6 -SEE DBWR TRACE FILE),& ORA-01110(DATA FILE 6: '/SAPDATA/SPO'...
HOW SHOULD I RECTIFY MY PROBLEM...AS I AM VERY NEW IAM TRYING TO EXPLAIN CLEARLY ...PLEASE HELP ME IN SOLVING THIS ISSUE....I HAVE EVEN TRIED ALTER DATABASE OPEN...I AM GETTING ERRORS OF ORA-01157,ORA-01110....WHAT IS MY PROBLEM HOW SHOULD I RECTIFY IT..PLEASE SORT THIS....
THANKS,
MIKE

Well, did you check f.i. your alert.log and other dumps?
They will be on your server in the bdump, udump, cdump directories:
Where to Find Files for Analyzing Errors
Oracle records information about important events that occur in your Oracle RAC environment in trace files. The trace files for Oracle RAC are the same as those in single-instance Oracle databases. As a best practice, monitor and back up trace files regularly for all instances to preserve their content for future troubleshooting.
Information about ORA-600 errors appear in the alert_SID.log file for each instance where SID is the instance identifier. For troubleshooting, you may need to also provide files from the following bdump locations:
* $ORACLE_HOME/admin/db_name/bdump on UNIX-based systems
* %ORACLE_HOME%\admin\db_name\bdump on Windows-based systems
Some files may also be in the udump directory.
In addition, the directory cdmp_timestamp contains in-memory traces of Oracle RAC instance failure information. This directory is located in ORACLE_HOME/admin/db_name/bdump/cdmp_timestamp, where timestamp is the time at which the error occurred.
Trace dump files are stored under the cdmp directory. Oracle creates these files for each process that is connected to the instance. The naming convention for the trace dump files is same as for trace files, but with .trw as the file extension.
(http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/appsupport.htm#RACAD512)

Errors ORA-01034, ORA-27101 and ORA-01033

Hi!
I have Oracle 9i DB and DevSuite 10g installed on my laptop. There are three databases on my machine.
Recently, I tried to install Oracle Discoverer 10g and that's where the problem started. I could no longer connect to the databse using either SQL*Plus, TOAD or even from the front end application.
I realised that some of the regisrty entries were no longer in place after the Discoverer installation. After doing these entries, I am still getting the following errors while connecting:
ORA-01034 : Oracle not available
ORA-27101 : Shared memory realm does not exist
After doing the following entries in the registry, for the default database, I'm getting the 'ORA-01033 : Oracle Initialization or shutdown in progress' error while connecting for that particular db:
ORACLE_SID=DTA
ORA_DTA_AUTOSTART=TRUE
ORA_DTA_SHUTDOWN=TRUE
ORA_DTA_SHUTDOWN_TIMEOUT=30
ORA_DTA_SHUTDOWNTYPE=i
And for the other two DBs, the errors ORA-01034, ORA-27101 remain the same.
Can anyone please help?
Best regards,
Aparna

Have you checked your Windows services for the Oracle instances? Started and set to auto-start on boot.
Also check your $path variable to make sure the Oracle home(s) appear in the path
HTH -- Mark D Powell --

Strange errors ORA-02068 ORA-00600

Hi,
I have a strange error in my mapping, that I have never heard before.
In the source schema, I have a table that I check, that gives me a list of PK in order to know which lines I have to take in the other table of the schema.
At the end of the mapping, I have to UPDATE the table in order not to take the lines when the mapping is executed the next day : there is a field which is a flag that I have to update from 0 to 1.
But the mapping never manage to UPDATE all the table, it gives me these errors :
ORA-00600 : internal error code, arguments : : [kdoorp-1], [15], [0], [], [], [], [], []
ORA-02068 : following severe error from [DB_LINK_NAME]
I made a mapping which only update the table and it doesn't work anymore. What is strange is that it stops the first time after 1003 rows updated, the second time 2007, the third 4014, etc... ? I don't understand ???!!
Can someone help me ?
Thanks,
Nico

There are some bugs reported against Oracle 9.2.0.8 with similar error:
bug 5703193 and 6020413 which is unpublished.
I can not recommend other than contacting support.
Regards,
Robert

ORA-01033: ORACLE initialization or shutdown in progress (standby error)

Hi all,
OS : SunOS 5.10 Generic_144488-02 sun4u sparc SUNW,Sun-Fire-880
Database : 10.2.0.4
I made physical standby database from primary to stanby using RMAN as
rman target / nocatalog sys/password@standby
RMAN>run {
allocate auxiliary channel ch1 device type disk;
duplicate target database for standby;
standby creation finished sucessfully , but when i performed log switch and forcely archive the current log the arhive was not trasferring.
while trying to connect from primary to standby as :
conn sys/password@standby (the below error displaying)
ORA-01033: ORACLE initialization or shutdown in progress
On stanby also the same error coming while connecting to sys/password@standby
but while setting export ORACLE_SID=standby and ORACLE _HOME i can be able to connect to sqlplus and managed standby database in recovery mode.
I am not confused why sys/password@standby is not being connecting ..
Please help !
Thanks

Standby alert log :
alter database recover managed standby database disconnect from session
Fri Dec 10 14:59:17 2010
Attempt to start background Managed Standby Recovery process (pstdby)
MRP0 started with pid=16, OS id=11517
Fri Dec 10 14:59:17 2010
MRP0: Background Managed Standby Recovery process started (pstdby)
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 3 processes
Fri Dec 10 14:59:23 2010
Waiting for all non-current ORLs to be archived...
Media Recovery Waiting for thread 1 sequence 84
Fri Dec 10 14:59:23 2010
Completed: alter database recover managed standby database disconnect from session
primary alert log :
Errors in file /software/oracle/admin/stdby/bdump/stdby_arc1_24121.trc:
ORA-12545: Connect failed because target host or object does not exist
PING[ARC1]: Heartbeat failed to connect to standby '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=pstdby_XPT)(INSTANCE_NAME=standby)(SERVER=dedicated)))'. Error is 12545.
Sat Dec 11 02:18:33 2010
Error 12545 received logging on to the standby
Sat Dec 11 02:18:33 2010
Errors in file /software/oracle/admin/stdby/bdump/stdby_arc1_24121.trc:
ORA-12545: Connect failed because target host or object does not exist
PING[ARC1]: Heartbeat failed to connect to standby '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=pstdby_XPT)(INSTANCE_NAME=standby)(SERVER=dedicated)))'. Error is 12545.
Edited by: VipinK on Dec 10, 2010 1:39 AM

ORA-01033 Oracle initialization or shutdown in progress error

Hi All,
I am using windows 7 on my 64-bit machine, and I installed oracle database 12c. Everything was installed fine, and i was able to connect to the HR schema. However, the next day when I wanted to connect, I got the ORA-01033 Oracle initialization or shutdown in progress error. What did I do wrong ? and what can I do to fix it ?? Thank you for the help.

Sorry but there are NO SHORTCUTS!
I already answered that above and referred you to the docs and an article.
The doc chapters explain the NEW multitenant architecture in detail. The new 12c architecture is SUBSTANTIALLY different from previous architectures. Until you read the docs about it and understand how it has been implemented you will continue to have NOTHING but problems.
I know that may sound like just another RTFM but for 12c it is imperative that you understand the new architecture if you want to avoid problems. There is no way to explain it all in the forums; Oracle takes a good two chapters just to cover the basics.
I also pointed you to an article that shows how to startup the CDB and PDBs manually or write a STARTUP trigger to do it automatically.
Hopefully you are doing all of this in a VM environment as you seemingly implied in one of your other threads?
https://forums.oracle.com/thread/2594464
There are already some VM templates available for 12c
http://www.oracle.com/technetwork/server-storage/vm/database-templates-12c-11gr2-1972804.html

Error ora-01033 initialization or shutdown in progress Oracle 10g

Hello !
I am a young Gabonese student and I need your help , it turns out that I have an Oracle database 10g and I am facing the same problem for a month already
Indeed, my database shows me
The instance of the database that my application connects (SID = MyApp) fails has started, due to an error with the code:
ora-01033 initialization or shutdown in progress.
And here is the list of other error messages that SQLPLUS console displays:
ORA - 01115: for I / O error reading block from file 2 <# block 926>
ORA - 01110: data file 2:
C: \ MyApp \ DATABASE \ ORACLE \ ORADATA \ MyApp \ UNDOTBS01.DBF
ORA - 27070: Failed to read / write asynchronous
OSD - 04016: Error queuing of pending asynchronous I / O request.
O / S - Error: <OS 1117> unable to meet demand due to an error O peripheral I /
ORA - 01115: I / O error reading block from file 2 <Block # 983>
ORA - 01110 data file 2
C: \ MyApp \ DATABASE \ ORACLE \ ORADATA \ MyApp \ UNDOTBS01.DBF
ORA - 27070: failure to read / write asynchronous
it 's been days since I research different forum a clear solution for this type of problem but I can not find anything satisfactory and definitive any help for me is precious ... thank you in advance

c8884db4-2595-4c5e-bd57-a33002f6d13c wrote:
Hello !
I am a young Gabonese student and I need your help , it turns out that I have an Oracle database 10g and I am facing the same problem for a month already
Indeed, my database shows me
The instance of the database that my application connects (SID = MyApp) fails has started, due to an error with the code:
ora-01033 initialization or shutdown in progress.
And here is the list of other error messages that SQLPLUS console displays:
ORA - 01115: for I / O error reading block from file 2 <# block 926>
ORA - 01110: data file 2:
C: \ MyApp \ DATABASE \ ORACLE \ ORADATA \ MyApp \ UNDOTBS01.DBF
ORA - 27070: Failed to read / write asynchronous
OSD - 04016: Error queuing of pending asynchronous I / O request.
O / S - Error: <OS 1117> unable to meet demand due to an error O peripheral I /
ORA - 01115: I / O error reading block from file 2 <Block # 983>
ORA - 01110 data file 2
C: \ MyApp \ DATABASE \ ORACLE \ ORADATA \ MyApp \ UNDOTBS01.DBF
ORA - 27070: failure to read / write asynchronous
it 's been days since I research different forum a clear solution for this type of problem but I can not find anything satisfactory and definitive any help for me is precious ... thank you in advance
OS/Disk failure external to Oracle.
Oracle is victim; not the culprit.
After the disk throwing error is replaced, you will need to restore the DB from most recent backup.

Error: ORA-01033: Oracle initialization or shudown in progress

I can't connect to my Oracle database 10g XE from both browser and SQL*Plus.
I get this Error message each time I try: ORA-01033: Oracle initialization or shudown in progress.
I am so confused, since I worked with it successfully yesterday and tis morning, I restored my system to yesterday to no avail. I tried stopping the database from the start menu and I got the prompt that the stop was successful, I started the database from the start menu and got a prompt that the start up was successful, yet when I try to go to the database Home Page from the same start menu, Internet Explorer can't display the page and SQL*Plus returns the afore-mentioned error.
What can I do to urgently connect to this database?

this the result of executing the prescribed commands:
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Feb 12 09:13:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1287016 bytes
Variable Size 113249432 bytes
Database Buffers 167772160 bytes
Redo Buffers 2904064 bytes
ORA-00204: error in reading (block 3, # blocks 8) of control file
ORA-00202: control file: 'C:\ORACLEXE\ORADATA\XE\CONTROL.DBF'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
SQL> startup
The problem persist. Thanks for your reply
Edited by: Glogo on Feb 12, 2010 12:58 AM

ORA-01033 Error Coming Continuosly

When I am trying to connect to the database the error is coming "Oracle shutdown or intilialization is in process". I am not able to do anything.
My database is on some other computer and i am trying to connect using host string. I am using Oracle version10.1.0.4.2 (10G)
I checked the trace file and got the error below:
ORA-00333: redo log read error block 31464 count 8192
ORA-00312: online log 2 thread 1: 'D:\ORACLE\ORADATA\ORCL\REDO02.LOG'
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 23) Data error (cyclic redundancy check).
ORA-00333: redo log read error block 31464 count 8192
ORA-00312: online log 2 thread 1: 'D:\ORACLE\ORADATA\ORCL\REDO02.LOG'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
*** 2008-05-13 18:14:50.934
ORA-00333: redo log read error block 31464 count 8192
Please suggest the needful asap or mail @ [email protected]

ORA-01033: ORACLE initialization or shutdown in progress
Cause: An attempt was made to log on while Oracle is being started up or shutdown.
Action: Wait a few minutes. Then retry the operation.

Ora 01033 strange error

Similar Messages

Maybe you are looking for