ORA-01034 has me stumped!
oracle 11.2.0.3 EE on OL 5.5 under VMworkstation
This should be a no brainer, but all the usual suspects check out. Am configuring an repository db for Cloud Control. DB is on separate box from EM installation. EM install complained about existence of repository and instructed to use emca to deconfig and drop. So, on the db server:
[oracle@lnxsrv02 admin]$ env|grep ORA
ORACLE_UNQNAME=ORAREPOS
ORACLE_SID=ORAREPOS
ORACLE_BASE=/ora00/app/oracle
ORACLE_HOME=/ora00/app/oracle/product/11.2.0.3/db_1Internment looks good. Try a few critical connections
[oracle@lnxsrv02 admin]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Wed Mar 21 12:57:35 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> conn sysman/halftrack
Connected.
SQL> conn sysman/halftrack@orarepos
Connected.
SQL> conn sys/halftrack@orarepos as sysdba
Connected.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsSo I know that db is up, I have the correct passwords, and it can connect via tns, so listener is also correct.
[oracle@lnxsrv02 admin]$ emca -deconfig dbcontrol db -repos drop -SYS_PWD halftrack -SYSMAN_PWD halftrack
STARTED EMCA at Mar 21, 2012 1:00:13 PM
EM Configuration Assistant, Version 11.2.0.3.0 Production
Copyright (c) 2003, 2011, Oracle. All rights reserved.
Enter the following information:
Database SID: orarepos
Listener port number: 1521
WARNING : While repository is dropped the database will be put in quiesce mode.
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 21, 2012 1:00:31 PM oracle.sysman.emcp.DatabaseChecks checkDbAvailabilityImpl
WARNING: ORA-01034: ORACLE not available
Mar 21, 2012 1:00:31 PM oracle.sysman.emcp.DatabaseChecks throwDBUnavailableException
SEVERE:
Database instance is unavailable. Fix the ORA error thrown and run EM Configuration Assistant again.
Some of the possible reasons may be :
1) Database may not be up.
2) Database is started setting environment variable ORACLE_HOME with trailing '/'. Reset ORACLE_HOME and bounce the database.
For eg. Database is started setting environment variable ORACLE_HOME=/scratch/db/ . Reset ORACLE_HOME=/scratch/db and bounce the database.Ok, I'm brain dead and open for suggestions.
Ed, can you try creating a db with the DBCA and the option for EM selected? I know its not a solution but at least that would tell us whether EM is capable of being created on the box or not at all?
Regards
Aman....
Similar Messages
-
ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exi
Hi all,
suddenly our oracle 10g database stopped working. When we tried export the database following was the output
C:\Documents and Settings\Administrator>EXP PMIS/PMIS FILE=C:\PMIS.DMP
Export: Release 10.2.0.1.0 - Production on Wed Mar 25 16:15:08 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 1034 encountered
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
EXP-00005: all allowable logon attempts failed
EXP-00000: Export terminated unsuccessfullyalert log file had the output as
Wed Mar 25 16:02:12 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:>sessions = 49
>__shared_pool_size = 71303168
>__large_pool_size = 8388608
>__java_pool_size = 4194304
>__streams_pool_size = 0
>spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
>sga_target = 146800640
>control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
>__db_cache_size = 58720256
>compatible = 10.2.0.1.0
>db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
>db_recovery_file_dest_size= 10737418240
>undo_management = AUTO
>undo_tablespace = UNDO
>remote_login_passwordfile= EXCLUSIVE
>dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
>shared_servers = 4
>job_queue_processes = 4
>audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
>background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
>user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
>core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
>db_name = XE
>open_cursors = 300
>os_authent_prefix =
>pga_aggregate_target = 41943040
PMON started with pid=2, OS id=1632
PSP0 started with pid=3, OS id=1312
MMAN started with pid=4, OS id=200
DBW0 started with pid=5, OS id=1864
LGWR started with pid=6, OS id=188
CKPT started with pid=7, OS id=1328
SMON started with pid=8, OS id=1848
RECO started with pid=9, OS id=1760
CJQ0 started with pid=10, OS id=1920
MMON started with pid=11, OS id=768
MMNL started with pid=12, OS id=948
Wed Mar 25 16:02:13 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Mar 25 16:02:13 2009
alter database mount exclusive
Wed Mar 25 16:02:17 2009
Setting recovery target incarnation to 2
Wed Mar 25 16:02:17 2009
Successful mount of redo thread 1, with mount id 2563569989
Wed Mar 25 16:02:17 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Wed Mar 25 16:02:17 2009
alter database open
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
LGWR: terminating instance due to error 470
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dbw0_1864.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_ckpt_1328.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_psp0_1312.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mman_200.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_pmon_1632.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_reco_1760.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_1848.trc:
ORA-00470: LGWR process terminated with error
Instance terminated by LGWR, pid = 188Again when we tried by connecting sqlplus following was output
SQL> connect sys/manager as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 83890100 bytes
Database Buffers 58720256 bytes
Redo Buffers 2904064 bytes
Database mounted.
ORA-03113: end-of-file on communication channelWe actually need database dump for user PMIS, any help would be highly appreciatedHi Wim
You should say that "It may be Control File problem", but you shouldn't say that "it's due to Control File" problem
Please refer to Errors Documentation for more information on ORA-00600
http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e0.htm#sthref371
ORA-00600: internal error code, arguments: [string], [string], [string], [string], [string], [string], [string], [string]
Cause: This is the generic internal error number for Oracle program exceptions. This indicates that a process has encountered an exceptional condition.
Action: Report as a bug - the first argument is the internal error number
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
Oracle 11g Installation DBCA ORA-01034: Oracle Not Available
I have two oracle databases installed (using the default settings in dbca) and running on a Windows 2003 R2 server, already.
However, when I try and create a third using the defaults, after 2%, dbca receives an ORA-01034: Oracle Not Available and stops the creation process.
I've searched 16 hours or so for a similar issue, but haven't had much luck other than to check sqlnet.ora for OS authentication, the registry keys, and tnsnames.ora.
I've looked at the trace log for dbca a few times for the different attempts at creating a new database, and they tend to differ when the error is generated.
Looking at Event Viewer, I noticed that connection events occurred during installation, and that for at least one case, CONNECT / AS SYSDBA occured 3 times before the error was generated.
I've made more than 3 databases on another machine (XP - not server 2003), without any issue, but it seems odd that this error would be because of server 2003.
I'm fairly inexperienced with configuring databases for Oracle, so please excuse my ignorance.
Here's a log file to accompany the issue:
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [CommandLineArguments.process:639] CommandLineArguments->process: number of arguments = 0
[main] [14:59:16:976] [Host.checkOPS:2290] Inside checkOPS
[main] [14:59:16:976] [Host.checkOPS:2302] Trying to check cluster existence
[main] [14:59:17:38] [Library.getInstance:106] Created instance of Library.
[main] [14:59:17:38] [Library.load:206] Loading orauts.dll...
[main] [14:59:17:38] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:38] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orauts.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orauts.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:206] Loading MSVCR71.dll...
[main] [14:59:17:54] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:54] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\MSVCR71.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\MSVCR71.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:206] Loading orawsec11.dll...
[main] [14:59:17:54] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:54] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orawsec11.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orawsec11.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:206] Loading orasrvm11.dll...
[main] [14:59:17:54] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:54] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orasrvm11.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orasrvm11.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Version.isPre10i:213] isPre10i.java: Returning FALSE
[main] [14:59:17:54] [WindowsSystem.regKeyExists:1104] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [14:59:17:648] [WindowsSystem.getCSSConfigType:1271] configType=null
[main] [14:59:17:648] [Host.checkOPS:2308] cluster existence:false
[main] [14:59:17:648] [Host.checkOPS:2346] Cluster installed=false
[AWT-EventQueue-0] [14:59:19:429] [OsUtilsBase.getOracleBaseFromInventory:413] Getting ORACLE_BASE from inventory.
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:427] Setting oracle.installer.oui_loc = D:\app\Administrator\product\11.1.0\db_1\oui
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:430] Oracle Inventory property invptrloc = null
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:447] Inventory Home Size = 1
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:473] ORACLE_BASE returned from inventory:= D:\app\Administrator
[AWT-EventQueue-0] [14:59:19:445] [Host.displayOracleBaseWarning:1115] oracleBaseFromEnv null
[AWT-EventQueue-0] [14:59:19:445] [Host.displayOracleBaseWarning:1121] oracle_base from OUI D:\app\Administrator oracle_base from env
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:517] CustomSGA flag: false
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:518] Database Type: MULTIPURPOSE
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:519] Mem Percentage: 40
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:552] Total memory MB: 818
[AWT-EventQueue-0] [14:59:24:538] [OsUtilsBase.is64Bit:294] architecture is 64 bit: false
[AWT-EventQueue-0] [14:59:24:538] [MemoryCalculator.<clinit>:92] setting memory minimums for 32 bit
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:237] IN threadID:1 group#=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:237] IN threadID:1 group#=2
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:246] Current threadID=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:253] Current threadID=1 ==> redoGroups[0]=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:263] vRedoGroups:[1]
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:293] setAttribute: bExists=false
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:237] IN threadID:1 group#=3
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:246] Current threadID=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:253] Current threadID=1 ==> redoGroups[0]=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:253] Current threadID=1 ==> redoGroups[1]=2
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:263] vRedoGroups:[1, 2]
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:293] setAttribute: bExists=false
[AWT-EventQueue-0] [14:59:24:554] [TemplateManager.parseCloneTemplate:1509] See for any transportable datafiles in TemplateManager.....
[AWT-EventQueue-0] [14:59:36:804] [DatabaseNamePage.onNameChanged:751] m_oldGDBName =
[AWT-EventQueue-0] [14:59:36:819] [OracleHome.isRacEnabled:177] bRacOn = false
[AWT-EventQueue-0] [14:59:36:897] [ManagementOptionsPage.initializePage:692] Enumerating Agents
[AWT-EventQueue-0] [14:59:41:350] [ManagementOptionsPage.validate:1049] emConfigChkBox State: true
[AWT-EventQueue-0] [14:59:41:350] [ManagementOptionsPage.validate:1050] switchChkBox State: false
[AWT-EventQueue-0] [14:59:41:350] [ManagementOptionsPage.validateAndSetParams:1090] In validateAndSetParams
[AWT-EventQueue-0] [14:59:41:350] [NetworkUtils.checkListenerStatus:350] Checking listener status: LISTENER
[AWT-EventQueue-0] [14:59:41:569] [NetworkUtils.checkListenerStatus:356] lsnrct status output
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 13-JUN-2008 14:59:41
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXX)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production
Start Date 13-JUN-2008 10:32:10
Uptime 0 days 4 hr. 27 min. 33 sec
Trace Level user
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora
Listener Log File d:\app\administrator\diag\tnslsnr\XXX\listener\alert\log.xml
Listener Trace File d:\app\administrator\diag\tnslsnr\XXX\listener\trace\ora_1792_1876.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=XXX)(PORT=1521)))
Services Summary...
Service "Oracle8" has 2 instance(s).
Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
The command completed successfully
[AWT-EventQueue-0] [15:0:14:475] [TemplateManager.isInstallTemplate:2226] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [15:0:14:475] [TemplateManager.isInstallTemplate:2233] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [15:0:14:490] [TemplateManager.isInstallTemplate:2226] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [15:0:14:490] [TemplateManager.isInstallTemplate:2233] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [15:0:14:506] [TemplateManager.isInstallTemplate:2226] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [15:0:14:506] [TemplateManager.isInstallTemplate:2233] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [15:0:15:84] [Verifier.processRawConfigFile:3709] StorageType == 0
[AWT-EventQueue-0] [15:0:15:84] [DatabaseOptionPage.doNext:266] processRawConfigFile=false
[AWT-EventQueue-0] [15:0:17:724] [InitParametersPage.validate:225] InitParametersPage->validate: in SPFile condition
[AWT-EventQueue-0] [15:0:17:724] [InitParametersPage.validate:229] original spFileName with variables ={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [15:0:17:724] [Verifier.validateSPFile:4853] The SPFILE={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [15:0:17:724] [ClusterUtils.validateRawDevice:784] Inside validateRawDevice
[AWT-EventQueue-0] [15:0:17:724] [ClusterUtils.validateRawDevice:796] Device Exception
[AWT-EventQueue-0] [15:0:17:724] [ClusterUtils.isRaw:762] The handle is invalid.
[AWT-EventQueue-0] [15:0:17:724] [InitParametersPage.validate:337] InitParametersPage->validate: calling createUndoAttributes
[AWT-EventQueue-0] [15:0:19:131] [StoragePage.selectAndExpandItem:333] item=oracle.sysman.emSDK.client.dataComponent.dataDrivenTree.TreeParentNode[label=Storage,index=0]
[AWT-EventQueue-0] [15:0:19:178] [StoragePage.selectAndExpandItem:342] item.isExpanded=true
[AWT-EventQueue-0] [15:0:19:193] [StoragePage.selectAndExpandItem:354] selection.isSelected(item)=false
[AWT-EventQueue-0] [15:0:20:771] [StoragePage.validate:934] StoragePage: In validate function
[AWT-EventQueue-0] [15:0:20:787] [Verifier.validateTemplate:1780] StorageType == 0
[AWT-EventQueue-0] [15:0:20:818] [CreationOptionPage.setSaveTemplateVisible:465] Setting save template visible = true
[AWT-EventQueue-0] [15:0:23:177] [DBCAWizard.onFinish:1203] m_bFinishClicked: false
[TaskScheduler timer] [15:0:23:177] [OracleHome.isRacEnabled:177] bRacOn = false
[TaskScheduler timer] [15:0:23:193] [NetworkUtils.checkListenerStatus:350] Checking listener status: LISTENER
[TaskScheduler timer] [15:0:23:412] [NetworkUtils.checkListenerStatus:356] lsnrct status output
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 13-JUN-2008 15:00:23
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXX)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production
Start Date 13-JUN-2008 10:32:10
Uptime 0 days 4 hr. 28 min. 14 sec
Trace Level user
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora
Listener Log File d:\app\administrator\diag\tnslsnr\XXX\listener\alert\log.xml
Listener Trace File d:\app\administrator\diag\tnslsnr\XXX\listener\trace\ora_1792_1876.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=XXX)(PORT=1521)))
Services Summary...
Service "Oracle8" has 2 instance(s).
Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
The command completed successfully
[TaskScheduler timer] [15:0:23:412] [Verifier.validateTemplate:1780] StorageType == 0
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.calculateRedoLogGroupFileSizes:3269] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.calculateRedoLogGroupFileSizes:3269] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.calculateRedoLogGroupFileSizes:3269] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.getControlfFileSizes:3187] No. of Control files:=3
[Thread-15] [15:0:23:474] [UIHost.getHtmlSummary:1055] UIHost:getHtmlSummary: running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-15] [15:0:23:490] [UIHost.getHtmlSummary:1061] UIHost:getHtmlSummary: after running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-15] [15:0:23:615] [XSLConst.generateHeaderXSL:211] NLS:Template Name:= null
[Thread-15] [15:0:23:615] [XSLConst.generateHeaderXSL:216] Template Description:= Use this database template to create a pre-configured database optimized for general purpose or transaction processing usage.
[Thread-15] [15:0:23:865] [UIHost.getHtmlSummary:1100] UIHost->getHtmlSummary: start printing of transformed document
[TaskScheduler timer] [15:0:26:302] [Host.executeSteps:4426] Executing steps....
[TaskScheduler timer] [15:0:26:302] [Host.setUpForOperation:3198] setUpForOperation: Mode = 128
[TaskScheduler timer] [15:0:26:302] [OsUtilsBase.copyFile:715] OsUtilsBase.copyFile:
[TaskScheduler timer] [15:0:26:318] [OsUtilsBase.copyFile:763] **write of file at destination complete...
[TaskScheduler timer] [15:0:26:318] [OsUtilsBase.copyFile:798] **file copy status:= true
[TaskScheduler timer] [15:1:13:879] [OsUtilsBase.copyFile:763] **write of file at destination complete...
[TaskScheduler timer] [15:1:13:879] [OsUtilsBase.copyFile:798] **file copy status:= true
[TaskScheduler timer] [15:1:13:895] [Host.executeSteps:4605] setupForOperation returned: true
[TaskScheduler timer] [15:1:13:895] [Host.createStepSQLInterface:6444] sid =Mapping
[TaskScheduler timer] [15:1:13:895] [SQLEngine.getEnvParams:446] NLS_LANG: AMERICAN_AMERICA.WE8MSWIN1252
[TaskScheduler timer] [15:1:13:895] [SQLEngine.initialize:253] Execing SQLPLUS/SVRMGR process...
[TaskScheduler timer] [15:1:14:35] [SQLEngine.initialize:281] m_bReaderStarted: false
[TaskScheduler timer] [15:1:14:35] [SQLEngine.initialize:285] Starting Reader Thread...
[Thread-35] [15:1:14:35] [StepContext$ModeRunner.run:2487] ---- Progress Needed:=true
[Thread-35] [15:1:14:67] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-35] [15:1:14:67] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-35] [15:1:14:67] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:14:67] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-35] [15:1:14:67] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:14:67] [InitParamAttributes.sortParams:3562] m_sortOn:4 sortOn:4
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1698] Processing init param db_block_size
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1703] The value is 8192
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1698] Processing init param open_cursors
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1703] The value is 300
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1698] Processing init param db_domain
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1703] The value is ""
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param db_name
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is Mapping
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param control_files
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is ("D:\app\Administrator\oradata\Mapping\control01.ctl", "D:\app\Administrator\oradata\Mapping\control02.ctl", "D:\app\Administrator\oradata\Mapping\control03.ctl")
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param db_recovery_file_dest
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is D:\app\Administrator\flash_recovery_area
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param db_recovery_file_dest_size
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 2147483648
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param compatible
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 11.1.0.0.0
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param diagnostic_dest
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is D:\app\Administrator
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param memory_target
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 857735168
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param processes
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 150
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param audit_file_dest
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is D:\app\Administrator\admin\Mapping\adump
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param audit_trail
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is db
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param remote_login_passwordfile
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is EXCLUSIVE
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param dispatchers
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is "(PROTOCOL=TCP) (SERVICE=MappingXDB)"
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param undo_tablespace
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is UNDOTBS1
[Thread-35] [15:1:14:473] [OracleHome.isRacEnabled:177] bRacOn = false
[Thread-35] [15:1:14:473] [Host.noEntryinOratab:5562] Check made for oratab arg passed............
[Thread-35] [15:1:14:473] [Oradim.getAddEntryCommand:355] AddEntry=[D:\app\Administrator\product\11.1.0\db_1\bin\oradim.exe, -new, -sid, MAPPING, -startmode, manual, -spfile]
[Thread-35] [15:1:19:35] [Oradim.getEditEntryCommand:436] getEditEntry cmd=[D:\app\Administrator\product\11.1.0\db_1\bin\oradim.exe, -edit, -sid, MAPPING, -startmode, auto, -srvcstart, system]
[Thread-35] [15:1:19:520] [Oradim.addSidToRegistry:884] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb11g_home1
[Thread-35] [15:1:19:520] [OracleHome.getVersion:974] OracleHome.getVersion called. Current Version: 11.1.0.6.0
[Thread-35] [15:1:19:520] [OracleHome.getVersion:1046] Current Version From Inventory: 11.1.0.6.0
[Thread-35] [15:1:19:520] [OracleHome.getVersion:1051] using sqlplus: D:\app\Administrator\product\11.1.0\db_1\bin\sqlplus.exe
[Thread-35] [15:1:19:520] [CommonUtils.createPasswordFile:515] calling new orapwd for version : 11.1.0.6.0
[Thread-35] [15:1:19:520] [OsUtilsBase.execProg:1335] beginning execProg with input array.
[Thread-35] [15:1:19:520] [OsUtilsBase.execProg:1347] finished execProg with input array.
[Thread-35] [15:1:19:520] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:19:520] [CloneRmanRestoreStep.executeImpl:218] Instance Creation went fine..........
[Thread-35] [15:1:19:520] [CloneRmanRestoreStep.executeImpl:225] db_recovery_file_dest=D:\app\Administrator\flash_recovery_area
[Thread-35] [15:1:19:520] [CloneRmanRestoreStep.executeImpl:228] db_recovery_file_dest_size=2147483648
[Thread-35] [15:1:23:67] [SQLEngine.done:2014] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:853)
at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:245)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2497)
at java.lang.Thread.run(Thread.java:595)
[Thread-35] [15:1:23:207] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:23:207] [StepContext$ModeRunner.run:2513] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:448)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2497)
java.lang.Thread.run(Thread.java:595)
[Thread-35] [15:1:24:191] [SQLEngine.done:2014] Done called
[Thread-35] [15:1:24:191] [Host.createStepSQLInterface:6444] sid =Mapping
[Thread-35] [15:1:24:207] [SQLEngine.getEnvParams:446] NLS_LANG: AMERICAN_AMERICA.WE8MSWIN1252
[Thread-35] [15:1:24:207] [SQLEngine.initialize:253] Execing SQLPLUS/SVRMGR process...
[Thread-35] [15:1:24:207] [SQLEngine.initialize:281] m_bReaderStarted: false
[Thread-35] [15:1:24:207] [SQLEngine.initialize:285] Starting Reader Thread...
[Thread-35] [15:1:24:348] [CloneRmanRestoreStep.cancel:614] Cleaning up partially extracted files failed
[Thread-35] [15:1:24:535] [SQLEngine.done:2014] Done called
[Thread-35] [15:1:24:754] [CloneRmanRestoreStep.cancel:629] RMAN cleanup failed
[Thread-35] [15:1:24:754] [CloneRmanRestoreStep.cancel:630] oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:853)
oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.cancel(CloneRmanRestoreStep.java:617)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.cancel(StepContext.java:2590)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2552)
java.lang.Thread.run(Thread.java:595)
[Thread-35] [15:1:24:754] [CloneDBCreationStep.cancel:895] CloneDBCreationStep.cancel(): nodeList= null
[Thread-35] [15:1:24:754] [SQLEngine.reInitialize:624] Reinitializing SQLEngine...
[Thread-35] [15:1:24:754] [SQLEngine.getEnvParams:446] NLS_LANG: AMERICAN_AMERICA.WE8MSWIN1252
[Thread-35] [15:1:24:754] [SQLEngine.initialize:253] Execing SQLPLUS/SVRMGR process...
[Thread-35] [15:1:24:754] [SQLEngine.initialize:281] m_bReaderStarted: false
[Thread-35] [15:1:24:863] [SQLEngine.initialize:285] Starting Reader Thread...
[Thread-35] [15:1:24:863] [SQLEngine.initialize:334] Waiting for m_bReaderStarted to be true
[Thread-35] [15:1:25:254] [SQLEngine.done:2014] Done called
[Thread-35] [15:1:25:473] [OracleHome.isRacEnabled:177] bRacOn = false
[Thread-35] [15:1:25:473] [Oradim.getRemoveEntryCommand:477] Execing D:\app\Administrator\product\11.1.0\db_1\bin\oradim.exe -delete -sid MAPPING
[Thread-35] [15:1:27:316] [SQLEngine.done:2014] Done called
[AWT-EventQueue-0] [15:1:30:379] [SQLEngine.done:2014] Done called
Any help will be greatly appreciated.I found out from another dba that oracle takes up 1 gb of memory by default. So creating 2 databases with default settings means that 2 gb of memory was taken on a windows 32 bit server. So that means only 2 gb is available to the machine, and the server takes up more than half of that making the memory available scarce for another oracle database to be created.
-
Errors - ORA-01034, ORA-27101 & Linux-x86_64 Error: 2: No such file or dir
I have installed Oracle 10g database and AS 10g on SUSE linux EE 10 (SP2)
When I try to log in as system/system using sqlplus locally on the server, it works fine. However, when I try the following I get error messages:
SQL> conn system/system@botsdb
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
I tried the same from my laptop through sqlplus and the error message is the same.
I checked if the database was up and to check this I executed follwing commands whicle still being logged as system/system:
SQL>Select * from v$database;
SQL>Select * from v$instance;
SQL>Select * from tab;
These do bring results. Also if I try to start up the database again, it gives error message that the database is already up. I have restarted the db number of times, checked if my listener was listening on the service BOTSDB and these all seem fine.
It is very intriguing that when @BOTSDB is attached while connecting, the connection fails.
Can someone please guide me to sort this error?
Thanks and kind regards,
AparnaHi
I am answering all the three questions here.
1) No of instances on the machine, I understand it is 1.
2) Results of lsnrctl status
oracle@linuxserver:~> lsnrctl status
LSNRCTL for Linux: Version 10.1.0.4.2 - Production on 28-JUL-2010 09:19:33
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=linuxserv.dcdm.mu)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.4.2 - Production
Start Date 27-JUL-2010 11:24:12
Uptime 0 days 21 hr. 55 min. 20 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10ginfra/network/admin/listener.ora
Listener Log File /oracle/app/ora10ginfra/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=linuxserver.dcdm.mu)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "metarep.dcdm.mu" has 1 instance(s).
Instance "metarep", status READY, has 3 handler(s) for this service...
The command completed successfully
--Note that lsnrctl status command was issued after loading 10ginfra.env file.
Please note that the listener for the database is set as DBLISTENER and lsnrctl status DBLISTENER was executed after loading 10gdb.env file. The results of lsnrctl status DBLISTENER are as follows:
oracle@linuxserver:~> . ./10gdb.env
oracle@linuxserver:~> lsnrctl status DBLISTENER
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 28-JUL-2010 09:24:44
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.107.123)(PORT=1650)))
STATUS of the LISTENER
Alias DBLISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 27-JUL-2010 15:11:28
Uptime 0 days 18 hr. 13 min. 15 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10gdb/network/admin/listener.ora
Listener Log File /oracle/app/ora10gdb/network/log/dblistener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.107.123)(PORT=1650)))
Services Summary...
Service "BOTSDB" has 1 instance(s).
Instance "BOTSDB", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
3) The output of ps -ef |grep pmon is
oracle@linuxserver:~> ps -ef |grep pmon
oracle 12524 12091 0 09:16 pts/1 00:00:00 grep pmon
oracle 12525 1 0 Jul27 ? 00:00:00 ora_pmon_metarep
oracle 25776 1 0 Jul27 ? 00:00:00 ora_pmon_BOTSDB
The contents of listener.ora in two different Oracle Homes (one for AS infrastrcuture and another one for database) are as follows:
oracle@linuxserver:/oracle/app/ora10ginfra/network/admin> vi listener.ora
# listener.ora Network Configuration File: /oracle/app/ora10ginfra/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10ginfra)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = linuxserv.dcdm.mu)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
oracle@linuxserver:/oracle/app/ora10gdb/network/admin> vi listener.ora
# Generated by Oracle configuration tools.
SID_LIST_DBLISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10gdb/)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = BOTSDB)
(ORACLE_HOME = /oracle/app/ora10gdb/)
DBLISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.107.123)(PORT = 1650))
Kind regards,
Aparna -
ORA-01034 ORACLE NOT AVAILABLE
hi everybody,
i'm trying to install a second instance on Oracle8.1.7 on Sun Enterprise 250 (with Solaris 8).
the previous instance has this init.ora file:
open_cursors = 300
max_enabled_roles = 30
db_block_buffers = 10240
shared_pool_size = 52437800
large_pool_size = 614400
java_pool_size = 20971520
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 270
log_buffer = 163840
timed_statistics = true # if you want timed statistics
max_dump_file_size = 10000 # limit trace file size to 5M each
db_block_size = 8192
local_listener = "LISTENER_VCOPROD"
distributed_transactions = 75
open_links = 5
# mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
# Uncomment the following line when your listener is configured for SSL
# (listener.ora and sqlnet.ora)
# mts_dispatchers = "(PROTOCOL=TCPS)(PRE=oracle.aurora.server.SGiopServer)"
sort_area_size = 4194304
sort_area_retained_size = 4194304
db_file_multiblock_read_count = 32
hash_multiblock_io_count = 8
transactions_per_rollback_segment = 25
please, notePROCESSES is 270 (not the default)
and i'm trying to set the following parameters on the new instance:
dedicated server mode
db_block_buffers 16.384
shared_pool_size 83.886.080
processes 150
log_buffer 655.360
open_cursors 1.024
sort_area_size 1.048.576
sort_area_retained_size 1.048.576
this is my /etc/system:
** Kernel Parameters on our SUN Enterprise with 640MB for Oracle 8.1.x*
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmni=70
set semsys:seminfo_semmsl=500
set semsys:seminfo_semmns=1500
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=32767
but as the "create database" starts, i get the ORA-01034 ORACLE NOT AVAILABLE error.
i found this info in the crdb1.log:
Connected.
ORA-00101: invalid specification for system parameter MTS_DISPATCHERS
CREATE DATABASE "ADS"
ORA-01034: ORACLE not available
Disconnected.
but why do i have the MTS_DISPATCHERS paramenter if i set dedicated server mode? i guess i don't need MultiThreading...
anyway, are the semmsl, semmni, semmns parameters correctly configured? i rememeber i had a similar error and these parameters were to set correctly to make it work, but this time i can't find out the point!!!
please, it's very urgent...
thankx a lot!
mattei'm installing a new instance, so i don't need neither to set ORACLE_SID, nor to connect to db. i mean... i give my oracle sid in the GUI of the dbassist.
then it's supposed to set it and connect to the instance by its own. the point is that when it tryes the connect internal, it fails.
i bet the trouble is in the /etc/system parameters, but i don't know exactly where.... -
Hello all!
I need urgent help!!
I'm trying to start Oracle 8.1.6 i on Solaris 8. But there are lot of error:
1. During initialising the database with dbassist, the error Code Error Codes: ORA 01034-"ORACLE not available" and ORA-01012-"not logged on" were shown.
2. I'm trying to start Oracle 8i on Sun Solaris 8 by typing svrmgrl-connect interal-startup. But the following was shown on by screen:
passau% svrmgrl
Oracle Server Manager Release 3.1.6.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> startup
LRM-00109: could not open parameter file '?/dbs/[email protected]'
ORA-01078: failure in processing system parameters
Please help me!!
My e-mail Adress: [email protected]I am pretty sure this has to do with the SGA..
what you may have to do is adjust you
system file
Here the values for /etc/system file: for more info look under
Oracle specific parameters (documetation) set shmsys:shminfo_shmmax=122496729 set semsys:seminfo_semmap=150 set semsys:seminfo_semopm=100 set semsys:seminfo_semvmx=12767 set semsys:seminfo_semmni=200 set semsys:seminfo_semmns=200 set semsys:seminfo_semmsl=200 set semsys:seminfo_semmnu=200 set semsys:seminfo_semume=100 set shmsys:shminfo_shmmin=100 set shmsys:shminfo_shmmni=100 set shmsys:shminfo_shmseg=100
good luck
[email protected]
null -
After I installed Oracle 8i Enterprise Edition on Win XP, default datanase was not creates so i tried manually creating it but it flashed this error while logging.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\oracle>SQLPLUS
SQL*Plus: Release 8.1.7.0.0 - Production on Wed Apr 30 20:09:50 2003
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Enter user-name: INTERNAL
Enter password:
ERROR:
ORA-01031: insufficient privileges
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not existU r getting ORA-01034 and ORA-27101 because ur database has not started.
try connecting svrmgrl as below
go to command prompt
svrmgrl
connect internal
startup pfile=<pfilename with full path>
Now logon to sqlplus and try to connect as system. -
DB creation failed with error ORA-01034
Hi,
I am trying to create db through dbca, but it's failed because of ORA-01034.
group ownership of software is changed from dba to a_dba. What is possible cause of this error...?Hi,
>>group ownership of software is changed from dba to a_dba
For what reason did you perform this task?
>>ORA-01034.
Could you confirm if the database is open or not? There are other messages that accompanying this message?
Reference:
ORA-01034: ORACLE not available
Cause: Oracle was not started up. Possible causes include the following:
- The SGA requires more space than was allocated for it.
- The operating-system variable pointing to the instance is improperly defined.
Action: Refer to accompanying messages for possible causes and correct the problem mentioned in the other messages. If Oracle has been initialized, then on some operating systems, verify that Oracle was linked correctly. See the platform specific Oracle documentation.
Cheers
Legatti
Added reference
Message was edited by:
Eduardo Legatti -
Urgent! Error: ORA-01034 Oracle not available for Oracle10gi
I have used SQL*Plus for a while, but recently when I try to login there is this error message:
Error:
ORA-01034 ORACLE not available
ORA-27101 shared memory realm does not exist
I had search for the solution quite a while. I changed the "sqlnet.ora" from C:\OraHome_1\NETWORK\ADMIN
I changed SQLNET.AUTHENTICATION_SERVICES=NT; to SQLNET.AUTHENTICATION_SERVICES=NONE and then reboot the machine.
The weird thing is that sometimes it works after I reboot the machine, but recently this just doesn't work any more. The SQL*Plus generates the same error message as I wrote above.
It seems like this kind of problem has troubled lots of oracle database users. IS this a bug that exists in the Oracle10gi?
Or does Oracle10gi require to run on certain operating system platform like Windows XP Professional but does not support for Windows XP Home Edition?
Can the Oracle company provide some error solution guide for the public for their own system?
many thanksNo this specific error message is not a result of an Oracle bug to my knowledge.
In my experience it is a simple matter of not using Oracle correctly. Only it is not that simple from a pure end-user perspective as Oracle is not a mickey mouse little filing system that pretends to be a database (like MS Access).
Which makes sense. After all, driving a bicycle does not mean one is able to get on a superbike. And if you respond "what!! why is it a superbike!?" then you need a bicycle in the first place.
The cause of the error you list - the client is making a local IPC dedicated server connection to the Oracle instance. This fails as the dedicated server cannot find the Oracle SGA (shared memory area) to attached to. This is usually the result of
a) the Oracle instance is down (and thus the SGA does not exist)
b) the ORACLE_SID used by the client is incorrect (and thus it attempts to attach to a non-existant SGA)
Reason (a) could be caused by some underlaying issue that results in the Oracle instance shutting down automatically or unintentionally.
As for what Oracle 10G requires operating system wise. There are detailed platform certification matrixes on the Oracle web site. In addition, the INSTALLATION notes of Oracle also specifies what platforms are supported.
You also fail to mention the exact Oracle product you're running. Oracle XE is different than Oracle Standard Edition which is different than Oracle Enterprise Edition.
There is btw a dedicated support forum here for Oracle XE - and this one ain't it. -
ORA-01034: ORACLE not available when connect with connect string
Hi,
Database version is- 10.1.0.5.0 on Veritas Cluster, We are able to connect without giving connect string. but when we provide connect string as orcl it gives
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
when we do tnsping it works
$ tnsping orcl
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 08-MAY-2013 15:00:40
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
/D01/OIDTEST/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl.test.com)))
OK (0 msec)
tnsnames.ora entry :-
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.test.com)
listener.ora entry:-
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = orcl.test.com)
(ORACLE_HOME = /D01/OID)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
listener log contains
08-MAY-2013 14:47:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl.test.com)(CID=(PROGRAM=sqlplus)(HOST=physical_hostname)(USER=oraprod))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xx.yy.zz.xx)(PORT=63969)) * establish * orcl.test.com * 0
08-MAY-2013 14:50:49 * ping * 0
08-MAY-2013 14:51:21 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
WARNING: Subscription for node down event still pending
08-MAY-2013 14:51:33 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=physical_hostname)(USER=oraprod))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=168822016)) * status * 0
can you please advice.
Thanks
Edited by: user10702579 on May 8, 2013 11:09 AMHi,
lsnrctl services
LSNRCTL for Linux: Version 10.1.0.5.0 - Production on 09-MAY-2013 08:26:47
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cluster_hostname.test.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
$
Thanks -
ORA-01034: ORACLE not available with oracle 10.2 in Ubuntu server 11.10
Hi all,
I have this error message with my new installed oracle-xe 10g (10.2):
luc@cuba:~$ sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:25:43 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Or if I try with SYSDBA:
luc@cuba:~$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:34:34 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
If a did the status command:
luc@cuba:~$ sudo /etc/init.d/oracle-xe status
[sudo] password for luc:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-JAN-2012 23:29:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 09-JAN-2012 22:44:12
Uptime 0 days 0 hr. 44 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cuba)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
What I did wrong?
Regards,user13538830 wrote:
Hi all,
I have this error message with my new installed oracle-xe 10g (10.2):
luc@cuba:~$ sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:25:43 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Or if I try with SYSDBA:
luc@cuba:~$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:34:34 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
If a did the status command:
luc@cuba:~$ sudo /etc/init.d/oracle-xe status
[sudo] password for luc:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-JAN-2012 23:29:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 09-JAN-2012 22:44:12
Uptime 0 days 0 hr. 44 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cuba)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
What I did wrong?First, you installed on an unsupported OS.
Second, you apparently did not Read The Fine Manual, Installation Guide
post results from following OS command
env | sort -
ERROR ORA-01034 : ORACLE not available
HELLO FRIENDS,
i m new for oracle. I newly install Oracle 8i on my windows Xp computer. after restarting PC when i login on sql plus using scott/tiger it gives me a error message : ORA-01034 : ORACLE not available. then my friend tell me the following procedure to overcome this problem
1. go to <ORACLE_HOME>\bin
2. run svrmgrl.exe
then execute following two commands in svrmgrl command prompt.
connect internal
startup open
using this initially i logged in on sql plus using scott/tiger. but after restart the computer the same problem arise again.
please help me as soon as possible.
windows xp is installed on C:\ drive and oracle 8i is installed on E:\ drive.
thanks in advance.hi
i cannot find alert.log file in my system. i also take of search service of win xp but unable to find alert.log file.
second thing i noticed is that the OraclesService<database name> is unable to start completely.the status for this service is STARTING. another service OracleOraHome81DataGatherer has a status STOP when i try to start it a warning message is displayed
Could not start the OracleOraHome81DataGAtherer service on local computer.
Error 2: The system cannot find the file specified. what is this. -
I have just installed Oracle Enterprise Manager on a Windows 2000 server. The automatic start-up of the the Management Server does not work correctly. I have defined an automatic start for the service.
I get the following message in the OMS.LOG.0 file:
-ORA-01034: ORACLE not processError: lost connection
-VXA-2018 :Unable to connect to OMS registry service
-ORA-01034: ORACLE not available
-Error starting Oracle Management Server. ORA-01034: ORACLE not available
I can start the Oracle Management Service manually and than all works fine.
I haven't been into the services dialog too much so far, but as I understand, the problem is that the Oracle Manager Server service is started before Oracle is up running.
Anyone who has an idea ?
Thanks in advance
Stig
nullStig,
I think that you are probably correct in that the OMS server requires that the registry database is up befor it will come up correctly.
On Windows 2000,
have a look at http://support.microsoft.com/support/kb/articles/Q193/8/88.ASP
YOu need to make the OMS Service dependant on the OracleService<SID NAME>
mail me if you need more help -
Recently recieved a copy of the developer kit for linux which included Oracle 8i enterprise. I followed the instructions found in the install guide (even printed it for reference)
When the install was finished I followed the instructions in the admin guide to setup the DB to start automatically.
The problem occurs when I run sqlplus. After typing in any username/password it just comes back with ORA-01034: Oracle not available. Anyone know what I'm missing?
I have tried manually starting the db (dbstart), I've tried running the oracle executable but that doesn't seem to do anything. Doesn't even get added to the process list (ie ps -A, doesn't show here). I also tried to connect using svrmgr (not the correct executable name but real close, can't remember right now) But srvmgr returned the exact same error code.
The machine this is loaded on is a Toshiba Satellite 4025CDT Notebook. 64mb ram, big hd, etc. Currently running SuSE 7.0
Thanks for any help you can provide. Email me or post here if you need any more info
Mark Russell
nullDid you try to start the database using svrmgrl as follows:
- svrmgrl
connect internal
startup
This should work. The dbstart script has errors, there are some sollutions posted elsewhere on this forum -
Hi All,
can i make sure if i get ora-121 or ora-01034 errors then the database is down.
As my database is getting down on every 3rd sunday of a month.
Thanks & Regards
MeghHi..
>
Error: ORA-00121 (ORA-121)
Text: SHARED_SERVERS specified without DISPATCHERS
Cause: A definition for SHARED_SERVERS was specified in the INIT.ORA
file, but no definition for DISPATCHERS was specified. Without a
value for DISPATCHERS, shared servers will never be used.
Action: Add a definition for DISPATCHERS in the INIT.ORA file (or take
out the definition for SHARED_SERVERS, if shareds servers are not
being used).
>
For ORA-00121 refer to Metalink Doc ID: Note:235608.1
>
Error: ORA 1034
Text: Oracle not available
Cause: Oracle was not started up.
Possible causes include the following:
The SGA requires more space than was allocated for it.
The operating system variable pointing to the instance was improperly
defined.
Action: Refer to accompanying messages for possible causes and correct the
problem mentioned in the other messages.
Retry after Oracle has been initialized.
If Oracle has been initialized, then on some operating systems, verify
that Oracle was linked correctly.
See the platform-specific Oracle documentation.
>
HTH
Anand
Maybe you are looking for
-
I have already backed up my iPhone, yet it still will not allow me to move the contents of my phone onto my computer. Rather, it wants to delete everything off of my phone and replace it with the contents on my iTunes. Is there a way I can integrate
-
Process: Mount Notification [747] Path: /Library/Application Support/Paragon NTFS for Mac OS X/Mount Notification.app/Contents/MacOS/Mount Notification Identifier: com.yourcompany.Mount-Notification Version: 9.5.0 (1) Code Type:
-
I am using Captivate 2.0 and trying to make a SCORM content that will report user interaction in the new Fronter 7.1 (www.fronter.com). I use the reload SCORM 1.2 player for complaince check, since I do not have one for SCORM 2004 ( http://www.reload
-
Subsequent Debit/Credit for Freight Costs
Is it possible to configure additional indicators for subsequent debit/credit specifically to capture freight costs that would then flow those costs down to the material? What is the proper process for this activity?
-
Browser pages open way off in the distance,"small print".How do i fix this?
Every Web Page I go to opens up very small. For every page I have to zoom the page many times just to read it. Is there anyway to set the page zoom to stay on that setting for every page?