ORA-01801 Error

Hi,
We are using Oracle Ver 9.2.0.5 and the application connects to the database using JDBC. When are facing ORA-01801 date format error while executing some queries. When the same query is executed in SQL*Plus it gives the expected result.
Does anyone have faced the same problem and what is the solution to fix this.
Thanks in advance.

In our database we've both the date and timestamp columns. The occurs occasionally when we use date or timestamp column in the query.
I appreciate if you can direct me to the details to fix the problem or if you can let me know on how to solve this.
This very urgent please advise.

Similar Messages

ORA-01801 does not exist in Oracle Errors Documentation

Hi,
 
RMAN issed to me the following error: 
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 06/18/2007 09:55:57
RMAN-03999: Oracle error occurred while while converting a date: ORA-01801: date
format is too long for internal buffer 
Regardless of the error reason, when I looked up the ORA-01801 error in the following reference, I did not see the error number there: 
Oracle Database Error Messages 10g Release 2 (10.2) A14219-01
 
 
However, I saw it in Oracle 9i error documentation.
 
 
Are there any obsolete errors? Why I don't see the error in 10g doc?
Thanks in advance.

You should report such thing into Documentation
Nicolas.

Java.sql.SQLException:ORA-01801:date format is too long for internal buffer

Hi,
I am getting the following exception when i trying to insert data in to a table through a stored procedure.
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-01801: date format is too long for internal buffer
when execute this stored procedure from ana anonymous block , it gets executed successfully, but i use a OracleCallableStatement to execute the procedure i am getting this error.
Please let me know how to resolve this error.
Is this error something to do with the Database Configuration ?
Thanks & Regards
Meenal

I don't know if this will help, but we were getting this error in several of the standard OA framework pages and after much pain and aggravation it was determined that visiting the Sourcing Home Page was changing the timezone. For most pages this just changed the timezone that dates were displayed in, but some had this ORA-01801 error and some others had an ORA-01830 error (date format picture ends before converting entire input string). Unfortunately, if you are not using Sourcing at your site, this probably won't help, but if you are, have a look at patch # 4519817.
Note that to get the same error, try the following query (I got this error in 9.2.0.5 and 10.1.0.3):
select to_date('10-Mar-2006', 'DD-Mon-YYYY________________________________________________HH24:MI:SS') from dual;
It appears that you can't have a date format that is longer than 68 characters.

ORA-01801 problem

Hi,
lately a client of ours encountered a rather strange problem with the ORA-01801 error.
The error only occurs at the clients system. On our development environment everything works as expected.
Here is a snippet from the stored procedure in which the error is occuring:
select DECODE(termin_datum,
NULL, t_startdate,
TO_TIMESTAMP(to_char(termin_datum, 'YYYY-MM-DD') || ' ' ||
termin_bis, 'YYYY-MM-DD HH24:MI')
into t_startdate from bewerbung where bew_id = n_bew_id;
t_startdate is TIMESTAMP set to some date
termin_datum is DATE (might be NULL)
termin_bis is VARCHAR2 (might be NULL, should contain a time of day (e.g. "14:30"))
I tried various malformed input values but i could not get oracle to produce a 01801 error (I only got 01858, 01850, 01851).
What could cause the 01801 error?
Thanks.
Ulrich

I just got word from our customer that this error only occurs intermittently.Don't you just hate it when that happens?
Your only hope is that it is not randomly intermittment but only when some particular combination of things happens. But without a lot of tracing through business processes I don't see how you'd nail that. Of course it could be a bug (most incidents of ORA-1801 seem to be) but again a lot of work to pin it down.
Good luck, APC

Oracle 10g expdp fatal error (ORA-39125 & ORA-01801)

Key phrases: ORA-39125 ... DBMS_METADATA.FETCH_XML_CLOB [TABLE_STATISTICS] ... date format is too long
Hello,
While performing a routine export (expdp) of schemas in an Oracle 10.2 instance on Linux, a fatal error (ORA-39125) was genereted. A screen capture, including the error messages follows.
Export: Release 10.2.0.1.0 - 64bit Production on Wednesday, 20 May, 2009 15:34:44
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Processing object type SCHEMA_EXPORT/TABLE/TRIGGER
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB [TABLE_STATISTICS]
ORA-01801: date format is too long for internal buffer
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.KUPW$WORKER", line 6241
----- PL/SQL Call Stack -----
object line object
handle number name
0x807d2378 14916 package body SYS.KUPW$WORKER
0x807d2378 6300 package body SYS.KUPW$WORKER
0x807d2378 2340 package body SYS.KUPW$WORKER
0x807d2378 6861 package body SYS.KUPW$WORKER
0x807d2378 1262 package body SYS.KUPW$WORKER
0x801d2490 2 anonymous block
Job "SYSTEM"."SYS_EXPORT_SCHEMA_13" stopped due to fatal error at 15:34:54
Has anyone run into this problem?
Is it related to an Oracle bug?
Are there fixes/workarounds?
Thanks in advance,
Alan

Hi,
There have been fixes to this area. I don't know if this exact error has been fixed, but getting the latest patchset would be a good place to start.
Thanks
Dean

Sqlldr encounters ORA-01801 when NLS_LANG=.UTF8

Hi,
When I set NLS_LANG=.UTF8 and then run SQL Loader, I get the following error:
ORA-01801: date format is too long for internal buffer
My CTL file characterset is UTF8 and the content in the DAT file is also in UTF8 format. In addition, the table specified in the CTL file does not have any DATE column, only VARCHAR2 columns.
I have checked that all rows are loaded correctly and no data is corrupted.
When I changed NLS_LANG back to a non-UTF8 charset, the error did not appear.
Can someone provide some insight into why this is happening?
Thanks,
Eric

Thanks for the reply.
I had previously gone through the G11N guide that you mentioned.
I am encountering this error on AIX51 only when I ran the SQL Loader under NLS_LANG=TRADITIONAL CHINESE_TAIWAN.UTF8.
AIX51 (or Unix in general) supports UTF8 natively, so it puzzles me why I am hitting this error.
What I can guess is that the date format send from the oracle client is in the longer Taiwanese format, which the database cannot proceed. The date buffer at the database side could be in another locale format.
I am adding additional NLS parameters to my database initialization file to see how it turns out.
-Eric

Ora-00604 error and ora 01000 error while report generation.

hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.

Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000:     maximum open cursors exceeded
Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

Ora-00604,ora-01422 error while dropping the table

Hi gurus,
I am using Oracle 10g R2 on windows 2000 platform,while dropping the table the following error occured.
ORA-00604 : error occurred at recursive sql level 1.
ORA-01422: exact fetch returns more than requested number of rows.
Need urgent help.
Thanks in advance

Is there an AFTER EVENT trigger defined on this database? Can you check that?
Secondly, was this database migrated from earlier version? I remember having seen this problem on 9i (it was 9.2.0.1 or 9.2.0.2; I can't recall exactly).

Ora 600 error Arguments [25012] [11]

hi,
i've an ORA-00600: error Arguments [25012], [2], [11], [], [], [], [], [] by DELETE FROM table WHERE filed = :b1
ther are only 8 file in database. (not 11)
Can anybody help, or give me an information about Bug number: 742709
OS NT 4 / SP6 ORACLE RDBMS Version: 8.0.5.2.1.
Thank in advice
JFA

Trace File Contents:
============================================================================================
[oracle@oem trace]$ more /d01/app/guest/diag/rdbms/db11g/db11g/incident/incdir_191809/db11g_smon_4198_i191809.trc
Dump file /d01/app/guest/diag/rdbms/db11g/db11g/incident/incdir_191809/db11g_smon_4198_i191809.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /d01/app/guest/product/11.2.0/dbhome_1
System name: Linux
Node name: oem.tap.com
Release: 2.6.18-164.el5xen
Version: #1 SMP Thu Sep 3 02:41:56 EDT 2009
Machine: i686
Instance name: db11g
Redo thread mounted by this instance: 1
Oracle process number: 13
Unix process pid: 4198, image: [email protected] (SMON)
*** 2010-10-15 12:05:24.395
*** SESSION ID:(16.1) 2010-10-15 12:05:24.395
*** CLIENT ID:() 2010-10-15 12:05:24.395
*** SERVICE NAME:(SYS$BACKGROUND) 2010-10-15 12:05:24.395
*** MODULE NAME:() 2010-10-15 12:05:24.395
*** ACTION NAME:() 2010-10-15 12:05:24.395
Dump continued from file: /d01/app/guest/diag/rdbms/db11g/db11g/trace/db11g_smon_4198.trc
ORA-00600: internal error code, arguments: [13013], [5001], [267], [8444108], [2], [8444108], [17], [], [], [], [], []
========= Dump for incident 191809 (ORA 600 [13013]) ========
*** 2010-10-15 12:05:24.399
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=dma0vxbwh325p) -----
update smon_scn_time set time_mp=:1, time_dp=:2, scn=:3, scn_wrp=:4, scn_bas=:5, num_mappings=:6, tim_scn_map=:7 where scn = (sele
ct min(scn) from smon_scn_time)
==========================================================================================

Ora-01008 error with bind variable

Hi,
We have a test program which have one bind variable on a column which is varchar2(20), in the test program we've passed a 20 character string to the variable. The program returns error in one of the databases but all others are successful. We've checked the column is same in all of them.
Exception in thread "main" java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
ORA-01008: not all variables bound
Could you please advise how to troubleshoot this issue?
Regards

We aren't going to be able to help you if you won't post the database code that is giving the error.
And now we need the Java code that is constructing the query that you are using.
Your error is saying there is a second variable that you are not providing a value for.
And you said
>
We have a test program which have one bind variable on a column which is varchar2(20), in the test program we've passed a 20 character string to the variable.
>
But you are using a string that is 23 characters long
"a3g34-b13fd-efaie-f83fk"How does 23 go into 20?

Getting error-ORA-24381: error(s) in array DML

Hi i have written the following code to bulk insert into a database table.
I am getting an error while returning the result of the bulk insert query into the collection
I have tried to track it by using sql%bulk_exceptions.error_code.
But the error code that it is showing is just 1.
I trapped it using sqlerrm.
and that is showing-error(s) in array DML
What do i do?
DECLARE
 CURSOR temp_rec_tap_cur
 IS
 SELECT *
 FROM temp_records_tap;
 TYPE temp_rec_tab IS TABLE OF temp_rec_tap_cur%ROWTYPE;
 v_test_tab temp_rec_tab;
 v_rec_num num_tab;
 v_filename temp_records_tap.file_name%TYPE;
 v_error_code tap_reject.error_code%type;
 v_rej_value tap_reject.field_rej%type;
 v_errors number;
BEGIN
 SELECT file_name
 INTO v_filename
 FROM table1
 WHERE ROWNUM<2;
 OPEN temp_rec_tap_cur;
 LOOP
 BEGIN
 FETCH temp_rec_tap_cur
 BULK COLLECT INTO v_test_tab LIMIT 1000;
 FORALL i IN v_test_tab.FIRST .. v_test_tab.LAST SAVE EXCEPTIONS
 INSERT INTO tapdetail_tapin
 VALUES v_test_tab (i)
 RETURNING record_num
 BULK COLLECT INTO v_rec_num;
 EXCEPTION
 WHEN DUP_VAL_ON_INDEX
 THEN
 NULL;
 WHEN OTHERS
 THEN
 v_errors:=sql%bulk_exceptions.count;
 for i in 1..v_errors
 loop
 dbms_output.put_line(sql%bulk_exceptions(i).error_code);
 p3_errorlog ('TAPINDETAWARE', SQLERRM, v_filename);
 end loop;
 END;
 --RAISE;
 EXIT WHEN temp_rec_tap_cur%NOTFOUND;
 END LOOP;
INSERT INTO table2
SELECT file_id, file_name, sender_pmn, recipient_pmn, call_date,
 call_date_only, call_type, call_number, FIRST_RECORD,
 service_type, service_code, home_bid, serve_bid,
 chargeable_subs_type, imsi_min, msisdn_mdn, air_charges,
 air_charges_sdr, air_time, national_call_charges,
 national_call_charges_sdr, national_call_time,
 international_call_charges, international_call_charges_sdr,
 international_call_time, dir_assist_charges,
 dir_assist_charges_sdr, dir_assist_time, other_charges,
 other_charges_sdr, other_time, volume_charges,
 volume_charges_sdr, volume_units, tot_charges, tot_charges_sdr,
 tot_duration, state_tax, state_tax_sdr, local_tax,
 local_tax_sdr, state_and_use_tax, state_and_use_tax_sdr, va_tax,
 va_tax_sdr, other_tax, other_tax_sdr, charge_refund_indicator,
 advised_charge_currency, advised_charge, advised_charge_sdr,
 advised_charge_commission, advised_charge_commission_sdr,
 exchange_rate, mcc, mnc, process_date, chargeable_units,
 record_num, mscid,null,null,decode(call_type,0,'250',1,'251',5,'255'),null,'Duplicate Call'
 from temp_records_tap
 where record_num not in (select column_value from table(v_rec_num)) ;
EXCEPTION
WHEN OTHERS THEN
p3_errorlog ('TAP', SQLERRM, v_filename);
END;Edited by: user8731258 on Sep 14, 2010 2:58 AM
Edited by: user8731258 on Sep 14, 2010 3:01 AM

What is the type declaration of num_tab and how is record_num defined?
ORA-24381: error(s) in array DML
Cause: One or more rows failed in the DML.indicates that you fail on the insert itself. Are the table definitions the same? Same primary/unique keys?
Edited by: MBr on 14-Sep-2010 03:16

PL/SQL: ORA-04052: error occurred when looking up remote object.

Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
Kanchana

Hi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009*

ORA-1555 ORA-3136 errors:: elapsed time vs Query Duration

Dear all,
- My Database version is 11.2.0.2, Solaris.
- We have been having a problem in the production database where the front end nodes start going up and down for couple of hours sometimes. ; When node flapping is going on we get connection timed out alerts.
WARNING: inbound connection timed out (ORA-3136) opiodr aborting
process unknown ospid (4342) as a result of ORA-609 opiodr aborting
process unknown ospid (4532) as a result of ORA-609 opiodr aborting
process unknown ospid (4534) as a result of ORA-609 opiodr aborting....
Since this week node flapping is happening every day. Since past 2 days after or during node flapping we are getting ORA-1555 error.
Extract from alert log error:
ORA-01555 caused by SQL statement below (SQL ID: g8804k5pkmtyt, Query Duration=19443 sec, SCN: 0x0001.07bd90ed):
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.parentDeviceId, d.created, d.lastModified AS devLastMod, d.customerId, d.userKey1, d.userKey2, d.userKey4, d
.userKey5, d.firmwareFamily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.userKey6, d.provisioningId, d.status, d.classification, d.population, d.name, d.ipRe
solver, d.ipExpirationTime, d.geoLocationId,contact.firstContactTime, ifaces.id, ifaces.type AS ifaceType, ifaces.lastModified AS ifaceLastMod, ifaces.timeoutname, ifac
es.username1, ifaces.password1, ifaces.username2, ifaces.password2, ifaces.connReqUrl, ifaces.connReqScheme, ifaces.srvNonce, ifaces.deviceNonce, ifaces.phoneNumber,ifa
ces.bootstrapSecMethod, ifaces.srvAuthentication, ifaces.deviceAuthentication, ifaces.userPIN, ifaces.networkID, ifaces.omaSessionID, ifaces.portNum, ifaces.mgtIp, ifac
es.cmtsIp, ifaces.mgtReadCommunity, ifaces.mgtWriteCommunity, ifaces.cmtsReadCommunity, ifaces.cmtsWriteCommunity, devto.name AS devtoName, devto.rebootTimeout, devto.sessionInitiationI run Statspack report from the whole day duration, and looking into the elapsed time in seconds no more than 3739.61 sec (too lower than run duration in the alert log file of 19443 sec); So I would like to know if there is any co-relations between the ORA-3136 errors and the ORA-1555 errors?
 CPU CPU per Elapsd Old
Time (s) Executions Exec (s) %Total Time (s) Buffer Gets Hash Value
tTime <= :3 ) AND (endTime IS NULL OR endTime >= :4 )
 2773.77 7,787,914 0.00 3.4 3739.61 112,671,645 1909376826
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
SQL> show parameter UNDO_MANAGEMENT
NAME TYPE VALUE
undo_management string AUTO
SQL> show parameter UNDO_RETENTION
NAME TYPE VALUE
undo_retention integer 10800BR,
Diego

Thank you. Please let me know if it is enough or you need more information;
SQL ordered by Gets DB/Inst: DB01/db01 Snaps: 14835-14846
-> End Buffer Gets Threshold: 100000 Total Buffer Gets: 677,689,568
-> Captured SQL accounts for 73.6% of Total Buffer Gets
-> SQL reported below exceeded 1.0% of Total Buffer Gets
 CPU Elapsd Old
Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
 21,286,248 2,632,793 8.1 3.4 666.73 666.76 3610154549
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
 17,029,561 1,176,849 14.5 2.7 417.32 416.73 1909376826
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
 17,006,795 37 459,643.1 2.7 367.61 368.95 4045552861
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.userAnother Statspack report for the whole day shows;
SQL ordered by CPU DB/Inst: DB01/db01 Snaps: 14822-14847
-> Total DB CPU (s): 82,134
-> Captured SQL accounts for 40.9% of Total DB CPU
-> SQL reported below exceeded 1.0% of Total DB CPU
 CPU CPU per Elapsd Old
Time (s) Executions Exec (s) %Total Time (s) Buffer Gets Hash Value
tTime <= :3 ) AND (endTime IS NULL OR endTime >= :4 )
 2773.77 7,787,914 0.00 3.4 3739.61 112,671,645 1909376826
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
SQL ordered by Gets DB/Inst: DB01/db01 Snaps: 14822-14847
-> End Buffer Gets Threshold: 100000 Total Buffer Gets: 1,416,456,340
-> Captured SQL accounts for 55.8% of Total Buffer Gets
-> SQL reported below exceeded 1.0% of Total Buffer Gets
 CPU Elapsd Old
Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
 86,354,963 7,834,326 11.0 6.3 2557.34 2604.08 906944860
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
.....BR,
Diego
Edited by: 899660 on 27-ene-2012 7:43
Edited by: 899660 on 27-ene-2012 7:45

ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone

Hi
I'm trying to config my base_domain for SOA11g but i'm getting the following error when connecting to my Oracle XE DB to configure SOA,
please help thanks
Software installed
OS: Windows 7 64bit
DB: Oracle XE 10g
Oracle SOA 11.1.1.4.0
Oracle RCU 11.1.1.4.0
Oracle wls1034_generic
Error Detials
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_SOAINFRA
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_ORASDPM
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OSB JMS Reporting Provider
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://127.0.0.1:1521/XE;create=true;ServerName=127.0.0.1;databaseName=XE
User=DEV_SOAINFRA
Password=********
SQL Test=SELECT 1 FROM SYS.SYSTABLES
Insufficient data while reading from the network - expected a minimum of 6 bytes and received only 0 bytes. The connection has been terminated.
CFGFWK-60850: Test Failed!

Hi,
Please check the timezone set in your server where Weblogic is installed. Also ensure the timezone on which your weblogic is running, the same is present in in database by querying V$TIMEZONE_NAMES table. If it is not present then please change the timezone of the server. then try to execute the steps what you are doing, it will not throw any error.
if this helps please mark.
Thanks,
Kishore

ORA-00604: error occurred at recursive SQL level 1

Hi,
i have a view as source (DB2)
Target table in Oracle with the same structure
when i view data from the view all the records are listed.
after mapping the source and target source gets fail while debuging (test data)
and also while deploying the mapping i get the following error.
Anyone knows about the following errors
ACBLODS_MAP
Create
Warning
ORA-06550: line 0, column 0:
ORA-04052: error occurred when looking up remote object [email protected]@DB2_KAPIL_LOCATION
ORA-00604: error occurred at recursive SQL level 1
ORA-28500: connection from ORACLE to a non-Oracle system returned this
please someone help me to solve this
thanks in advance
regards
raja

I had a simular problem with progress. If the progress table had to many columns
OWB was failing. The problem was the ODBC driver used to make a connection to PROGRESS.

ORA-01801 Error

Similar Messages

Maybe you are looking for