ORA-02248 when importing from the RAU

Designer 6i rel. 4.6
ODS 10g rel. 9.0.4
Oracle 9.2.0.5
I did a full Designer 6i repository export from the RAU and then imported the dmp file into another Designer 6i repository from its RAU. The RAUs from both instances use the import/export utilities from ODS 10g rel. 9.0.4.
The export completes succesfully, but the import gives me the following warnings:
IMP-00017: following statement failed with ORACLE error 2248:
"ALTER SESSION SET "_PLSQL_LOAD_WITHOUT_COMPILE" = TRUE"
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00017: following statement failed with ORACLE error 2248:
"ALTER SESSION SET "_PLSQL_LOAD_WITHOUT_COMPILE" = FALSE"
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
I've searched Metalink but the only relevant information I could find was Note 19481.1. This note hasn't been updated since 1999, so I don't know if it's still relavent to the above versions.
Does anyone know what these warnings mean?
Thanks.

Yes I got it and talked to Oracle. As per them its a bug but I got a workaround for this problem.
If you still haven't got throught this mail me at [email protected]
Regards
Nikunj sharma

Similar Messages

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

HT4101 How is the photo size affected when importing from the SD card to ipad (2) ?

How is the photo size affected when importing from the SD card to ipad (2) ?
If they stay the same, any options I can have to "re-size" the photos so that I could use it for a photo storage when traveling?
Thanks.

To re-size, you can use:
https://itunes.apple.com/sg/app/simple-resize/id327776379?mt=8

Iphoto 6.0.6 -now when importing from the camera has slowed considerably, 23 photos took 1 hour during the finishing stage

Slow importing from camera, at the finsihing stage. Took 1 hour for 23 pics

How big is your HD? How much free space on it?

When importing from a Word document placing the text in InDesign

When importing from a Word document placing the text in InDesign I can only see the text from the first page of the Word document. I have increased the number of pages in the Indesign document to more than what is in the Word document, still only text from the first page is shown. What am I doing wrong or did I not set a setting correctly?

When you want to auto flow text while placing, hold down the Shift key when clicking with the Place cursor on the first page. New pages will be generated and text will be auto flowed using the margins set up on the master page.

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

Error: ORA-16796: one or more properties could not be imported from the dat

DGMGRL> CREATE CONFIGURATION prod as
PRIMARY DATABASE IS prod
CONNECT IDENTIFIER IS prod;Configuration "prod" created with primary database "prod"
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
can any one help me out , i am not sure what could be the problem.
i checked the listner and tnsnames every thing looks good, if u want me to post any thing else plz do let me know
thanks
firdous

16796, 0000, "one or more properties could not be imported from the database"
// *Cause: The broker was unable to import property values for the database
//          being added to the broker configuration. This error indicates:
//          - The Oracle Net service name specified in DGMGRL CREATE
//            CONFIGURATION or ADD DATABASE command was not one that provides
//            access to the database being added.
//          - There were no instances running for the database being added.
// *Action: Remove the database from the configuration using the REMOVE
//          CONFIGURATION or REMOVE DATABASE command. Make sure that the
//          database to be added has at least one instance running and that the
//          Oracle Net service name provides access to the running instance.
//          Also check the broker log file for additional information.
//          Then, reissue the CREATE CONFIGURATION or ADD DATABASE command.

Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

http://kb.mozillazine.org/Import_.pst_files

How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

Hi All,
Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options. The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
Thanks in advance,
Phil in San Diego

Phil,
PhilipCWells wrote:
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed. The link is:
http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
One of them should help you with this.
Jeff (in San Diego as well)

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

Have a look at your import setting specifically Store Files:
Make sure it is set to where you want the originals to go.
Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

No picture appears in window when importing from HD camcorder.

I've used iMovie 8 several times, importing from the same camera and for some reason now, when I'm trying to import, the video picture is not showing in the import screen - only on the camera. I've checked all connections and settings, and still no picture. I can click "import" and camera will start playing, but clearly no video is being imported because if I stop and click "done", there is nothing in my Event Library. Suggestions??

Same problem with Sony camcorder. All the forums say it is an issue with 9.0.6 and to downgrade to 9.0.4. Trouble is I have no disk and new iMac. Shipped with 9.0.6 so can't use time capsule. Called apple and they told me to download the drivers, this was not sucessful. Any one got a copy of 9.0.4?

Photos sent to file on desktop when importing from memory card

The photos sent to a file when importing from a memory card appear in the file as Adobe documents and cannot be opened. If I try to open a message appears 'Adobe Reader cannot open this document as it is not a supported file/
What has gone wrong?

You have already opened a thread on this issue, we don't need a second thread on the same issue.

Aperture Import destination grayed out when importing from iPad

I'm trying to import a bunch of photos from my iPad. I want to dump them all in one project in Aperture, but after selecting the iPad from the import source list, it grays out the options to select the destination. It also grays out the option to uncheck the Autosplit events. I do not want to do this import and then have to go back and merge 20 projects. Any ideas?

It' how Aperture works with the iPad see Aperture 3: Photos are not split into projects by date when importing from iPad as well as other threads here asking similar questions

Subtemplate footer is not coming when calling from the main template

Hi All,
The footer from the subtemplate is not coming in the output when calling from the main template. Does anybody worked on the subtemplate?
If the same footer is put in the main template, it is displaying.
Please respond as this is a critical issue for us.
Thanks,
Ambadas

Hi Tim,
Thanks for your reply. Here is syntax which I got from the Oracle BI Publisher blog. And this is to just test locally.
http://blogs.oracle.com/xmlpublisher/2006/04/11?import:file:///C:/temp/HeaderFooter.rtf
<?import:file:///d:/test/GEPOPRINT_GER_GER.rtf?>
<?import:file:///d:/test/GEPOPRINT_US.rtf?>
<?for-each@section:G_HEADERS?>
<?if:POH_REPORT_NAME='GER PO w/GERMAN Data'?>
<?call-template:PO_GERMAN?>
<?end if?>
<?if:POH_REPORT_NAME='US Purchase Order'?>
<?call-template:PO_US?>
<?end if?>
<?End for-each?>
And I don't have any footers in the main template but in the subtemplate I have the respective footers. If you want, I can send all the RTF's to you directly.
Let me know.
Thanks,
Ambadas

ORA-02248 when importing from the RAU

Similar Messages

Maybe you are looking for