ORA-02270 Error
I got ORA-02270 Error when tried to add foreign key on a detail table:
CREATE TABLE supplier
( supplier_id numeric(10) not null,
supplier_name varchar2(50) not null,
contact_name varchar2(50) ,
insertedate date not null,
CONSTRAINT supplier_pk PRIMARY KEY (supplier_id, insertedate );
CREATE TABLE sub_supplier
( supplier_id numeric(10) not null,
sub_supplier_id numeric(10) not null,
insertedate date not null,
other_details varchar2(10),
CONSTRAINT product_pk (supplier_id , sub_supplier_id, insertedate )
CONSTRAINT fk_supplier FOREIGN KEY (supplier_id)
REFERENCES supplier (supplier_id)
insertedate is actual system timestamp. I don't think it can be used as a reference.
Any idea how can I resolve this error?
Thank you.
What is insertedate in sub_supplier? Not null, and part of another constraint.
ORA-02270: no matching unique or primary key for this column-list
Cause: A REFERENCES clause in a CREATE/ALTER TABLE statement gives a column-list
for which there is no matching unique or primary key constraint in the referenced table.
Action: Find the correct column names using the ALL_CONS_COLUMNS catalog view
Similar Messages
-
I have a database where I am loading data from an existing database. When I create the tables, I do so with the constraints defined but disabled. After loading all of the data, I am enabling the constraints.
I am getting ORA-02270 error when trying to enable a foreign key that references a table's primary key. The keys all check out in the ALL_CONS_COLUMNS view. The only thing I can think of right now is that the primary keys have not been enabled, would this cause the error?...would this cause the error? YES, the primary keys have to be enabled.
-
Ora-2270 Error while adding foreign key constraint on top a view
While adding a constraint, referencing a foreign key column from a view raises error. However, it works fine over a table.
Here's the sample script:
create table t_temp (
sample_id number,
text varchar2(40))
alter table t_temp add constraint temp_pk
primary key (sample_id);
create view tempvw as select sample_id,text from t_temp;
create table t_sample (
uniq_id number,
sample_id number,
sample_text varchar(40));
=========
ALTER TABLE t_sample ADD CONSTRAINT FK_sample_temp
FOREIGN KEY (sample_id) REFERENCES t_temp (sample_id);
This works fine.
=========
==============
The following raises ERROR....
ALTER TABLE t_sample ADD CONSTRAINT FK_sample_temp1
FOREIGN KEY (sample_id) REFERENCES tempvw (sample_id);
Error starting at line 1 in command:
ALTER TABLE t_sample ADD CONSTRAINT FK_sample_temp1
FOREIGN KEY (sample_id) REFERENCES tempvw (sample_id)
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list
02270. 00000 - "no matching unique or primary key for this column-list"
*Cause: A REFERENCES clause in a CREATE/ALTER TABLE statement
gives a column-list for which there is no matching unique or primary
key constraint in the referenced table.
*Action: Find the correct column names using the ALL_CONS_COLUMNS
catalog viewWhat exactly are you trying to accomplish by having a
referential integrity constraint on a view (which is
not allowed). PKs and FKs are allowed on views. DISABLE NOVALIDATE is the only allowed state for them. View constraints are used for query rewriting: http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/qradv.htm#sthref1457
Regards,
Dima -
Ora-00604 error and ora 01000 error while report generation.
hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000: maximum open cursors exceeded
Cause: A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action: Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1) -
Ora-00604,ora-01422 error while dropping the table
Hi gurus,
I am using Oracle 10g R2 on windows 2000 platform,while dropping the table the following error occured.
ORA-00604 : error occurred at recursive sql level 1.
ORA-01422: exact fetch returns more than requested number of rows.
Need urgent help.
Thanks in advanceIs there an AFTER EVENT trigger defined on this database? Can you check that?
Secondly, was this database migrated from earlier version? I remember having seen this problem on 9i (it was 9.2.0.1 or 9.2.0.2; I can't recall exactly). -
Ora 600 error Arguments [25012] [11]
hi,
i've an ORA-00600: error Arguments [25012], [2], [11], [], [], [], [], [] by DELETE FROM table WHERE filed = :b1
ther are only 8 file in database. (not 11)
Can anybody help, or give me an information about Bug number: 742709
OS NT 4 / SP6 ORACLE RDBMS Version: 8.0.5.2.1.
Thank in advice
JFATrace File Contents:
============================================================================================
[oracle@oem trace]$ more /d01/app/guest/diag/rdbms/db11g/db11g/incident/incdir_191809/db11g_smon_4198_i191809.trc
Dump file /d01/app/guest/diag/rdbms/db11g/db11g/incident/incdir_191809/db11g_smon_4198_i191809.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /d01/app/guest/product/11.2.0/dbhome_1
System name: Linux
Node name: oem.tap.com
Release: 2.6.18-164.el5xen
Version: #1 SMP Thu Sep 3 02:41:56 EDT 2009
Machine: i686
Instance name: db11g
Redo thread mounted by this instance: 1
Oracle process number: 13
Unix process pid: 4198, image: [email protected] (SMON)
*** 2010-10-15 12:05:24.395
*** SESSION ID:(16.1) 2010-10-15 12:05:24.395
*** CLIENT ID:() 2010-10-15 12:05:24.395
*** SERVICE NAME:(SYS$BACKGROUND) 2010-10-15 12:05:24.395
*** MODULE NAME:() 2010-10-15 12:05:24.395
*** ACTION NAME:() 2010-10-15 12:05:24.395
Dump continued from file: /d01/app/guest/diag/rdbms/db11g/db11g/trace/db11g_smon_4198.trc
ORA-00600: internal error code, arguments: [13013], [5001], [267], [8444108], [2], [8444108], [17], [], [], [], [], []
========= Dump for incident 191809 (ORA 600 [13013]) ========
*** 2010-10-15 12:05:24.399
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=dma0vxbwh325p) -----
update smon_scn_time set time_mp=:1, time_dp=:2, scn=:3, scn_wrp=:4, scn_bas=:5, num_mappings=:6, tim_scn_map=:7 where scn = (sele
ct min(scn) from smon_scn_time)
========================================================================================== -
Ora-01008 error with bind variable
Hi,
We have a test program which have one bind variable on a column which is varchar2(20), in the test program we've passed a 20 character string to the variable. The program returns error in one of the databases but all others are successful. We've checked the column is same in all of them.
Exception in thread "main" java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
ORA-01008: not all variables bound
Could you please advise how to troubleshoot this issue?
RegardsWe aren't going to be able to help you if you won't post the database code that is giving the error.
And now we need the Java code that is constructing the query that you are using.
Your error is saying there is a second variable that you are not providing a value for.
And you said
>
We have a test program which have one bind variable on a column which is varchar2(20), in the test program we've passed a 20 character string to the variable.
>
But you are using a string that is 23 characters long
"a3g34-b13fd-efaie-f83fk"How does 23 go into 20? -
Getting error-ORA-24381: error(s) in array DML
Hi i have written the following code to bulk insert into a database table.
I am getting an error while returning the result of the bulk insert query into the collection
I have tried to track it by using sql%bulk_exceptions.error_code.
But the error code that it is showing is just 1.
I trapped it using sqlerrm.
and that is showing-error(s) in array DML
What do i do?
DECLARE
CURSOR temp_rec_tap_cur
IS
SELECT *
FROM temp_records_tap;
TYPE temp_rec_tab IS TABLE OF temp_rec_tap_cur%ROWTYPE;
v_test_tab temp_rec_tab;
v_rec_num num_tab;
v_filename temp_records_tap.file_name%TYPE;
v_error_code tap_reject.error_code%type;
v_rej_value tap_reject.field_rej%type;
v_errors number;
BEGIN
SELECT file_name
INTO v_filename
FROM table1
WHERE ROWNUM<2;
OPEN temp_rec_tap_cur;
LOOP
BEGIN
FETCH temp_rec_tap_cur
BULK COLLECT INTO v_test_tab LIMIT 1000;
FORALL i IN v_test_tab.FIRST .. v_test_tab.LAST SAVE EXCEPTIONS
INSERT INTO tapdetail_tapin
VALUES v_test_tab (i)
RETURNING record_num
BULK COLLECT INTO v_rec_num;
EXCEPTION
WHEN DUP_VAL_ON_INDEX
THEN
NULL;
WHEN OTHERS
THEN
v_errors:=sql%bulk_exceptions.count;
for i in 1..v_errors
loop
dbms_output.put_line(sql%bulk_exceptions(i).error_code);
p3_errorlog ('TAPINDETAWARE', SQLERRM, v_filename);
end loop;
END;
--RAISE;
EXIT WHEN temp_rec_tap_cur%NOTFOUND;
END LOOP;
INSERT INTO table2
SELECT file_id, file_name, sender_pmn, recipient_pmn, call_date,
call_date_only, call_type, call_number, FIRST_RECORD,
service_type, service_code, home_bid, serve_bid,
chargeable_subs_type, imsi_min, msisdn_mdn, air_charges,
air_charges_sdr, air_time, national_call_charges,
national_call_charges_sdr, national_call_time,
international_call_charges, international_call_charges_sdr,
international_call_time, dir_assist_charges,
dir_assist_charges_sdr, dir_assist_time, other_charges,
other_charges_sdr, other_time, volume_charges,
volume_charges_sdr, volume_units, tot_charges, tot_charges_sdr,
tot_duration, state_tax, state_tax_sdr, local_tax,
local_tax_sdr, state_and_use_tax, state_and_use_tax_sdr, va_tax,
va_tax_sdr, other_tax, other_tax_sdr, charge_refund_indicator,
advised_charge_currency, advised_charge, advised_charge_sdr,
advised_charge_commission, advised_charge_commission_sdr,
exchange_rate, mcc, mnc, process_date, chargeable_units,
record_num, mscid,null,null,decode(call_type,0,'250',1,'251',5,'255'),null,'Duplicate Call'
from temp_records_tap
where record_num not in (select column_value from table(v_rec_num)) ;
EXCEPTION
WHEN OTHERS THEN
p3_errorlog ('TAP', SQLERRM, v_filename);
END;Edited by: user8731258 on Sep 14, 2010 2:58 AM
Edited by: user8731258 on Sep 14, 2010 3:01 AMWhat is the type declaration of num_tab and how is record_num defined?
ORA-24381: error(s) in array DML
Cause: One or more rows failed in the DML.indicates that you fail on the insert itself. Are the table definitions the same? Same primary/unique keys?
Edited by: MBr on 14-Sep-2010 03:16 -
PL/SQL: ORA-04052: error occurred when looking up remote object.
Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
KanchanaHi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009* -
ORA-1555 ORA-3136 errors:: elapsed time vs Query Duration
Dear all,
- My Database version is 11.2.0.2, Solaris.
- We have been having a problem in the production database where the front end nodes start going up and down for couple of hours sometimes. ; When node flapping is going on we get connection timed out alerts.
WARNING: inbound connection timed out (ORA-3136) opiodr aborting
process unknown ospid (4342) as a result of ORA-609 opiodr aborting
process unknown ospid (4532) as a result of ORA-609 opiodr aborting
process unknown ospid (4534) as a result of ORA-609 opiodr aborting....
Since this week node flapping is happening every day. Since past 2 days after or during node flapping we are getting ORA-1555 error.
Extract from alert log error:
ORA-01555 caused by SQL statement below (SQL ID: g8804k5pkmtyt, Query Duration=19443 sec, SCN: 0x0001.07bd90ed):
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.parentDeviceId, d.created, d.lastModified AS devLastMod, d.customerId, d.userKey1, d.userKey2, d.userKey4, d
.userKey5, d.firmwareFamily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.userKey6, d.provisioningId, d.status, d.classification, d.population, d.name, d.ipRe
solver, d.ipExpirationTime, d.geoLocationId,contact.firstContactTime, ifaces.id, ifaces.type AS ifaceType, ifaces.lastModified AS ifaceLastMod, ifaces.timeoutname, ifac
es.username1, ifaces.password1, ifaces.username2, ifaces.password2, ifaces.connReqUrl, ifaces.connReqScheme, ifaces.srvNonce, ifaces.deviceNonce, ifaces.phoneNumber,ifa
ces.bootstrapSecMethod, ifaces.srvAuthentication, ifaces.deviceAuthentication, ifaces.userPIN, ifaces.networkID, ifaces.omaSessionID, ifaces.portNum, ifaces.mgtIp, ifac
es.cmtsIp, ifaces.mgtReadCommunity, ifaces.mgtWriteCommunity, ifaces.cmtsReadCommunity, ifaces.cmtsWriteCommunity, devto.name AS devtoName, devto.rebootTimeout, devto.sessionInitiationI run Statspack report from the whole day duration, and looking into the elapsed time in seconds no more than 3739.61 sec (too lower than run duration in the alert log file of 19443 sec); So I would like to know if there is any co-relations between the ORA-3136 errors and the ORA-1555 errors?
CPU CPU per Elapsd Old
Time (s) Executions Exec (s) %Total Time (s) Buffer Gets Hash Value
tTime <= :3 ) AND (endTime IS NULL OR endTime >= :4 )
2773.77 7,787,914 0.00 3.4 3739.61 112,671,645 1909376826
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
SQL> show parameter UNDO_MANAGEMENT
NAME TYPE VALUE
undo_management string AUTO
SQL> show parameter UNDO_RETENTION
NAME TYPE VALUE
undo_retention integer 10800BR,
DiegoThank you. Please let me know if it is enough or you need more information;
SQL ordered by Gets DB/Inst: DB01/db01 Snaps: 14835-14846
-> End Buffer Gets Threshold: 100000 Total Buffer Gets: 677,689,568
-> Captured SQL accounts for 73.6% of Total Buffer Gets
-> SQL reported below exceeded 1.0% of Total Buffer Gets
CPU Elapsd Old
Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
21,286,248 2,632,793 8.1 3.4 666.73 666.76 3610154549
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
17,029,561 1,176,849 14.5 2.7 417.32 416.73 1909376826
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
17,006,795 37 459,643.1 2.7 367.61 368.95 4045552861
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.userAnother Statspack report for the whole day shows;
SQL ordered by CPU DB/Inst: DB01/db01 Snaps: 14822-14847
-> Total DB CPU (s): 82,134
-> Captured SQL accounts for 40.9% of Total DB CPU
-> SQL reported below exceeded 1.0% of Total DB CPU
CPU CPU per Elapsd Old
Time (s) Executions Exec (s) %Total Time (s) Buffer Gets Hash Value
tTime <= :3 ) AND (endTime IS NULL OR endTime >= :4 )
2773.77 7,787,914 0.00 3.4 3739.61 112,671,645 1909376826
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
SQL ordered by Gets DB/Inst: DB01/db01 Snaps: 14822-14847
-> End Buffer Gets Threshold: 100000 Total Buffer Gets: 1,416,456,340
-> Captured SQL accounts for 55.8% of Total Buffer Gets
-> SQL reported below exceeded 1.0% of Total Buffer Gets
CPU Elapsd Old
Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
86,354,963 7,834,326 11.0 6.3 2557.34 2604.08 906944860
Module: JDBC Thin Client
SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
.....BR,
Diego
Edited by: 899660 on 27-ene-2012 7:43
Edited by: 899660 on 27-ene-2012 7:45 -
ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone
Hi
I'm trying to config my base_domain for SOA11g but i'm getting the following error when connecting to my Oracle XE DB to configure SOA,
please help thanks
Software installed
OS: Windows 7 64bit
DB: Oracle XE 10g
Oracle SOA 11.1.1.4.0
Oracle RCU 11.1.1.4.0
Oracle wls1034_generic
Error Detials
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_SOAINFRA
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_ORASDPM
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OSB JMS Reporting Provider
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://127.0.0.1:1521/XE;create=true;ServerName=127.0.0.1;databaseName=XE
User=DEV_SOAINFRA
Password=********
SQL Test=SELECT 1 FROM SYS.SYSTABLES
Insufficient data while reading from the network - expected a minimum of 6 bytes and received only 0 bytes. The connection has been terminated.
CFGFWK-60850: Test Failed!Hi,
Please check the timezone set in your server where Weblogic is installed. Also ensure the timezone on which your weblogic is running, the same is present in in database by querying V$TIMEZONE_NAMES table. If it is not present then please change the timezone of the server. then try to execute the steps what you are doing, it will not throw any error.
if this helps please mark.
Thanks,
Kishore -
ORA-00604: error occurred at recursive SQL level 1
Hi,
i have a view as source (DB2)
Target table in Oracle with the same structure
when i view data from the view all the records are listed.
after mapping the source and target source gets fail while debuging (test data)
and also while deploying the mapping i get the following error.
Anyone knows about the following errors
ACBLODS_MAP
Create
Warning
ORA-06550: line 0, column 0:
ORA-04052: error occurred when looking up remote object [email protected]@DB2_KAPIL_LOCATION
ORA-00604: error occurred at recursive SQL level 1
ORA-28500: connection from ORACLE to a non-Oracle system returned this
please someone help me to solve this
thanks in advance
regards
rajaI had a simular problem with progress. If the progress table had to many columns
OWB was failing. The problem was the ODBC driver used to make a connection to PROGRESS. -
ORA-00604: error occurred at recursive SQL level 1 (Call to a Oracle View)
I have created a view that refers to a package function within the sql select.
Like
E.x
CREATE OR REPLACE VIEW VW_TAX
as select
test_pkg.fn_get_gl_value(acct_id) desired_col1,
test_pkg.fn_get_gl_desc_value(acct_id) desired_col2
From tables a, b
a.col= b.col
The sample function( fn_get_gl_value) is embedded into a package (test_pkg).
Function fn_get_gl_value:
It earlier referred to table A1, B1, C1 and this query took really long, Therefore I used object type tables and stored the values required once within the package when it is invoked. Later I used the Tables A1, B1 and C1(table Cast from the type Table Loaded in Package Memory)
The query was fast and fine, but now when I try to re-use the view
select * from VW_TAX
where acct_id = '02846'
It fails with this message
09:32:35 Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
Note: The database is Oracle8i Enterprise Edition Release 8.1.7.4.0.
Maximum cursors database is 500
Please let me know if there is any known solution,
Appreciate all your help
Thanks
RPSeems like your OPEN_CURSORS init.ora parameter is set too low.
See Metalink Note:1012266.6 for details.
ORA-01000: "maximum open cursors exceeded"
Cause: A host language program attempted to open too many cursors.
The initialization parameter OPEN_CURSORS determines the
maximum number of cursors per user.
Action: Modify the program to use fewer cursors. If this error occurs
often, shut down Oracle, increase the value of OPEN_CURSORS,
and then restart Oracle. -
ORA-00604: error occurred at recursive SQL level
I only have 2 users and approx 9 schemas.
Why is this complaining about maximum cursors??
Error message:
ORA-00604: error occurred at recursive SQL level
ORA-01000: maximum open cursors exceeded
ORA-0064 error occurred at recursive SQL level
Cause:
An error occurred at recursive SQl level
(a statement applying to internal dictionary tables)
>>
Created 2 users
1) boundaries (User)
has a couple of schema.
National, provincial, district, village
I have set-up the Primary & Foreign keys.
Only 1 table has 1 row of data
2) Projects (User)
Set up one table - Program
Program has a Primary Key.
Foreign key is linked to (boundaries) national PK
The problem occured when I entered data into boundaries.nationalClive_S wrote:
OS: Windows Server 2008 standard - 64 bit.
Select * from v$version
Oracle Database 11g release 11.1.0.7.0 - 64 bit
PL/SQL release 11.1.0.7.0 - production core 11.1.0.7.0
Production TNS for 64-bit windows: 11.1.0.7.0
Production NLSRTL for 64-bit windows: 11.1.0.7.0
I am trying to replicate in Oracle what I would do in SQL Server. There's your first mistake. There are too many differences. My first programming language was COBOL, but I don't write other languages as if they were COBOL.
I cannot attach an image of the users & tablespace, to illustrate.Another reason to work in sqlplus.
>
I created 2 User = Boundaries and Project
I created several schemas (tables)No, you created 2 schemas. One user = one schema = one user.
A schema is not a table and a table is not a schema. A schema is a collection of objects, which can include multiple tables but only those owned by one username.
>
Boundaries (user)
Tables:
Country
Province
District
Village
Projects (user)
Tables:
Program
Project.Program has a FK = Country that is linked to Boundaries.Country
I need to create several scemas (databases):Another difference. a schema is not a database, though the sql server concept of a database is somewhat analogous to an oracle schema.
Boundaries, Project, Assets.
There are foreign keys linking the various schemas.FKs link tables not schemas.
Edited by: EdStevens on Feb 26, 2010 10:30 AM -
ORA-00604: error occurred at recursive SQL level 1 and ORA-30036:
Hi Gurus,
I am trying to shrink the table segment along with indexes.
I am using
alter table OWNER.TABLE shrink space cascade; syntax but after 1 hr i got the following error.
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30036: unable to extend segment by 4 in undo tablespace 'UNDOTBS01'
UNDO tablespace has sufficient space and undo_retention is 6Hrs. What could be the problem ?
Or do i need to use
alter table OWNER.TABLE shrink space; only ?
Thanks & RegardsHi,
I am doing this in testing enviornment and before this activity added 4g space to existing 50GB undo tablespace.
No jobs are running in testing environment and the shrinking on table is of 12GB. I cann't import/export and truncate or move to different tablespaces as this has oracle advanced queue and chances are more to corrupt queues.
Thanks
Maybe you are looking for
-
Schedule a part of webi report to excel
Hi I have a requirement , where i have multiple report tabs in a webi document and i want to schedule a particular tab to excel excluding the other tabs while scheduling Is it possible in BO 4.1? Any suggestions or Work arounds? Thanks Dinesh.P
-
What is the model number for an ipod classic 120gb
I keep reading about the 6th Gen and 7th Gen ipod classics... Its my understanding that there is no real 7th Gen ipod classic just a new 120gb storage version... What is the correct model number for this version and does it vary with color or other o
-
I haven't set up my new computer and large gamut monitor with profiles, etc, yet, but am seeing some obvious color shifts and I can't see where to check what profile is being assumed by lightroom. I have set all this up with photoshop before so am so
-
Functionality to handle JAVA Export and Imports in ChaRM covered under SP15
Hi All, Is the highly expected functionality of handling change request management for Java based systems (Export-Import for the Java transports) is covered under the Support pack 15 of SOLMAN4.0? If anyone has any information regarding please share.
-
I am having a problem validating my feed -- it is giving me an error message with my image code. I definitely just copied and pasted from the itunes site, and it looks identical. Can someone help?? Here's the feed validator link. Thanks so much! -Jes