ORA-03113 and ORA-03114

Hi..
When I access our Oracle database with SQL*Plus, from a client machine, after 10 or 15 minutes without requests to the server database, I get these error messages. But when I am running the proccesses from the machine server, it's not happens.
Could anyboby help me?
Thanks in advance.
Rafael.
null

I seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null

Similar Messages

ORA-03113 and ORA-03114 problems

Hi,
I'm experimenting Oracle8i. I'm installing 8.1.7 to RedHat Linux 7.0 out of box without recompiling the kernel. I set the SHMMAX to 0.5*258MB memory on the machine by echoing the number to /proc/sys/kernel/shmmax.
I checked that the system meets the requirements of Oracle's Installation Guide except SEMOPM. The RedHat Linux 7.0 sets it to 32, but Oracle requires 100.
I chose Oracle8i EE Typical Installation. The installation was ok to the point of running root.sh. Several syntax errors occur from root.sh. But they are minor syntax errors. I checked the code, regardless of errors, the scripts accomplished what it intends to do. The installation continued. I choose automatic configure Net8 when it ran Net8 Configuration Assistant and the Net8 Configuration was completed successful.
When it started Oracle Database Configuration Assistant, it created a database. But when it initialized the database, error messages ORA-03114 and ORA-03113 appeared many times. Each time, I chose to ignore. The final message was "Database creation completed with warnings."
After installation, I ran svrmgrl
$svrmgrl
SVRMGR> connect INTERNAL
Connected.
SVRMGR> startup
ORA-03113 end-of-file on communication channel
Checking the meaning of error messages, it says that if ORA-03113 occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server.
During installation, I chose Local naming method. There are following files in $ORACLE_HOME/network/admin/
listener.ora
sqlnet.ora
tnsnames.ora
shrept.lst
To my layman's eye, they looked ok. I can even telnet to the linux machine with database name, although I don't know how the machine has acquired the alias without any changes to /etc/named.conf nor any changes to any files in /var/named directory.
Please tell me what is correctly installed Net8? or what went wrong and how I should fix the problem.
Thanks,
Wayne
null

I seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null

ORA-03113 and ORA-07445 ACCESS_VIOLATION (again)

On:
10g
Windows 2003 server
IIS 6
ASP.NET 2.0
Oracle client 10.2.0.1.0
ODAC 10.2.0.2.21
odp.net 2.102.2.20
Validate Connection=true;Min Pool Size=0 in connection string
All odp.net connection, command and parameter objects are closed/disposed after use.
The issue:
ORA-03113 is returned to asp.net.
ORA-07445 ACCESS_VIOLATION is logged on database side. (see below)
It is ALWAYS the same select query (in stored procedure).
This is NOT a heavy query. Whole table is only 20K rows. (see below)
The rest of web application is UNAFFECTED. oracle connection and queries working normally.
Memory and threads used w3wp.exe are normal
Our only solution is for DBA to re-allocate table on db server.
I have read all related posts on this Forum but please any advice is welcome!
Thanks,
Adam
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [evaopn2+2896] [PC:0x15F3876] [ADDR:0x0] [UNABLE_TO_READ] []
Edited by: user10422769 on Sep 1, 2010 12:35 AM

according to this article:
<span> [Oracle ORA-07445 exception tips|<a class="smarterwiki-linkify" href="http://www.dba-oracle.com/t_ora_07445_exception_encountered.htm]">http://www.dba-oracle.com/t_ora_07445_exception_encountered.htm]</a>
</span>
ther is a lot of reasons for this issue I suggest that you try to do some action to try to understand where is the problem:
1. Change the connection string to contain only the schema parameter (no pooling parameters).
2. Change the select to return only 1:
_SELECT 1 as val_
FROM IIL_RUN_SETS ILRS
INNER JOIN IIL_RN_SET_STA_VALS ISSV
ON ILRS.ILRS_ID = ISSV.ILRS_ID
AND CURRENT_TIMESTAMP BETWEEN ISSV.TRANS_FROM AND ISSV.TRANS_TO
INNER JOIN IIL_RN_SET_STATUSES ISST
ON ISSV.ISST_ID = ISST.ISST_ID
INNER JOIN IIL_RUNS ILRN
ON ILRS.ILRS_ID = ILRN.ILRS_ID
LEFT OUTER JOIN IIL_RUN_LABELS IRLB
ON ILRN.IRLB_ID = IRLB.IRLB_ID
INNER JOIN IIL_RUN_STA_VALS IRSV
ON ILRN.ILRN_ID = IRSV.ILRN_ID
AND CURRENT_TIMESTAMP BETWEEN IRSV.TRANS_FROM AND IRSV.TRANS_TO
INNER JOIN IIL_RUN_STATUSES IRST
ON IRSV.IRST_ID = IRST.IRST_ID
INNER JOIN IIL_RUN_TYPES IRTY
ON ILRN.IRTY_ID = IRTY.IRTY_ID
INNER JOIN PRODUCTS PDCT
ON ILRN.PDCT_ID = PDCT.PDCT_ID
INNER JOIN USERS UPDATE_USER
ON ILRN.UPDATE_USER_ID = UPDATE_USER.USER_ID
WHERE ILRS.ILRS_ID ; = :B1
_AND rownum=1_
ORDER BY ILRN.ILRN_ID
if this result will not return the value that means that the problem is in the SQL/Procedure
3. Try to run on diffrent client - it maybe related to some ODP problem one one client.

Export failed, ORA-03113 and ORA-01041

Hello,
I'm trying to do a full export of my DB,I have installed Oracle 9i dataserver(configured in shared mode) on Windows 2k, and the following error appears me:
. exportando acciones y objetos de procedimiento pre-esquema
EXP-00008: se ha encontrado un error 3113 de ORACLE
ORA-03113: fin de archivo en el canal de comunicación
EXP-00008: se ha encontrado un error 1041 de ORACLE
ORA-01041: error interno. No existe la extensión hostdef
EXP-00000: La exportación no ha terminado correctamente
I don't understand it, because I have 2 other DB instances created in the same data server and their exportation have finished correctly.
Any idea?¿
Thanks a lot,
Mabel

Hi,
Here is the error description for error 1041:01041, 00000, "internal error. hostdef extension doesn't exist"
// *Cause: Pointer to hstdef extension in hstdef is null.
// *Action: Report as a bugAction is to report as a bug. you should open an iTar on Metalink.
Regards,
Yoann.

Ora-03113 and ORA-00474 - database does not startup . Help !

- Its a Oracle 10.2.0.1.0 standard edition database.
- we get the ora-03113 end of file communication error during startup.
- when we followed step by step it happens between MOUNT => OPEN stage.
- database does mount but gives ora-03113 end of file communication error during OPEN.
- when I checked the alert log file and it has the following errors.
ORA-00447: fatal error in background process
ORA-00474: SMON process terminated with error
- i did run "recover database" command it says media recovery complete, but when I try to open it fails with ora-03113 error. Even a reset logs did not help
Question:
1) I wanted to somehow open the database even if there is a data loss ? how can I do that ?
2) Can I create a new instance and attach these datafiles/controlfiles/redo logs and be able to start the database ?
3) We have only 6 months old backup , so wanted to know if somehow we can open this database.
Thanks in advance

johnpau2013 wrote:
- Its a Oracle 10.2.0.1.0 standard edition database.
- we get the ora-03113 end of file communication error during startup.
- when we followed step by step it happens between MOUNT => OPEN stage.
- database does mount but gives ora-03113 end of file communication error during OPEN.
- when I checked the alert log file and it has the following errors.
ORA-00447: fatal error in background process
ORA-00474: SMON process terminated with error
- i did run "recover database" command it says media recovery complete, but when I try to open it fails with ora-03113 error. Even a reset logs did not help
Question:
1) I wanted to somehow open the database even if there is a data loss ? how can I do that ?
2) Can I create a new instance and attach these datafiles/controlfiles/redo logs and be able to start the database ?
3) We have only 6 months old backup , so wanted to know if somehow we can open this database.
Thanks in advancewhat clues exist within alert_SID.log file?
When was last time it started without error?
What exactly transpired since then?
what OS name & version?
Edited by: sb92075 on Mar 24, 2012 4:23 PM

ORA-03113 and ORA-01041 errors

One of our customer is getting intermittent errors in the XA log.
ORACLE XA: Version 8.0.5.0.0. RM name = 'Oracle_XA'.
095809.6179..0:
ORA-03113: end-of-file on communication channel
095820.6179..0:
ORA-01041: internal error. hostdef extension doesn't exist
What could possible be wrong ?
null

Rajesh Mahajan (guest) wrote:
: One of our customer is getting intermittent errors in the XA
log.
: ORACLE XA: Version 8.0.5.0.0. RM name = 'Oracle_XA'.
: 095809.6179..0:
: ORA-03113: end-of-file on communication channel
: 095820.6179..0:
: ORA-01041: internal error. hostdef extension doesn't exist
: What could possible be wrong ?
Hi Rajesh , in my opinion you lost the communication with your
server . The server could be shutdown an restart again while
your aplication is running or waiting for any execution. With
Oracle Forms this happen an the forms loose the conection with
the server , but seems that this aplication was already running.
You only get close the forms , in NT , with the Task Manager
and End the Task . In the Sql Plus ocuurs the same but you can
close the section or make another conection with your database.
I hope help you ,
Regards
Lourival
null

Ora-03113 and ora-01041 in Oracle 8i.

Hi,
When i run this script in SQL*plus, i los the comunication.
The script is the next.
create type prueba_t
create or replace type prueba_t
as object
(cod_prueba varchar2(8),
padre ref prueba_t)
create table prueba of prueba_t
cod_prueba not null
alter table prueba add
(scope for (padre) is prueba)
In the last sentence Oracle send me the next message.
ORA-03113: end-of-file on comunication channel.
If you know this problem help me Please.

rothen_s wrote:
I've read the document 17613.1 in metalink. I did what is written in section C, i.e. I identified the part of the SQL statement that causes the error. Could someone of Oracle please answer to this?
Well, if you have metalink access, you should raise this as an issue. That's the best way to talk to Oracle about it. The forum may have a few Oracle people hanging around occasionally, but in general we're just volunteers with our own jobs around the world. ;)

Instance terminted with ORA-00445 and ORA-00494

Hi Folks,
Oracle 11g Instance terminated after ORA-00445 and ORA-00494. Not sure what is the problem didnot have this problem before. Can any body pls help?
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Below is the message found in alertlog.
Archived Log entry 17939 added for thread 1 sequence 17973 ID 0xee1270c6 dest 1:
Thu Apr 19 02:32:15 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:32:17 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:33:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:35:56 2012
Process 0x0xdfb80810 appears to be hung while dumping
Current time = 1203097316, process death time = 1203032607 interval = 60000
Attempting to kill process 0x0xdfb80810 with OS pid = 7563
OSD kill succeeded for process 0xdfb80810
Thu Apr 19 02:36:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_smco_8548.trc (incident=76297):
ORA-00445: background process "W000" did not start after 120 seconds
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76297/vchsit2_smco_8548_i76297.trc
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_arc2_7523.trc (incident=76329):
ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1, osid 7315'
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76329/vchsit2_arc2_7523_i76329.trc
Thu Apr 19 02:38:11 2012
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 19-APR-2012 02:38:11
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (2743) as a result of ORA-609
Thu Apr 19 02:38:12 2012
Trace dumping is performing id=[cdmp_20120419023812]
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by killing session 6.1
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by terminating the process
ARC2 (ospid: 7523): terminating the instance due to error 2103
Instance terminated by ARC2, pid = 7523
Thu Apr 19 10:43:07 2012

Hi;
Please see:
ORA-00445: Background Process "xxxx" Did Not Start After 120 Seconds [ID 1345364.1]
Regard
Helios

Ora 600 and ora 7445 error in oracle 10g r2

hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn

Hi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck

ORA-01180 and ORA-01110 error when restoring database by RMAN in 11.1.0.6.0

I have a new installed database running in ARCIHVELOG mode on SUSE 10SP3. Catalog is not used. When I try to restore the database from a level 0 backup based on SCN, ORA-01180 and ORA-01110 were raised out today. Please help me through this. Thx. The senario follows:
1. I got the current SCN by "select dbms_flashback.get_system_change_number from dual". Say it's 12345;
2. I did a level 0 hot backup with current control file, archived logs and parameter files. Everything went well;
3. Some other DMLs are applied to the database;
4. I want to do a SCN-based incomplete recovery for this database to SCN 12345. Then I
1) shutdown immediate;
2) startup nomount;
3) restore the control file from backupset;
5) startup mount;
6) catalog start with "[backupset path]";
7) restore database until scn 12345.
Just at step 4.7, ORA-01180 and ORA-01110 were raised out, saying cannot create data file 1. Note: Backup files are existing and file permissions are all OK.
Then I issues "list incarnation of database". There is just one record with incarnation id 1.
So I queried v$log_history, found serveral record there. The most recent one has NEXT_SCN later than 12345, say 12400. Then I tried to restore database until this SCN. It WORKED! The restore and recovery succeeded.
My questions are:
1. Why cannot I restore the database to a previous SCN, say 12345, but 12400 is OK?.
2. If the database was RESETLOG prior to my recovery, should I reset database to the incarnation where I took my backup? What can I do if there is no that incarnation information in my control file?
Waiting for your suggestion.

Hi guys. There is one update.
This issue is caused by the incorrect SCN vs. backup set. I got this SCN before the backup started. According to Oracle docs, it's not allowed for an SCN based recovery.
Now, I changed the sequence of my operations, so that SCN is got once backup is done, which is exact the "most recent sequence# and least SCN" mentioned by some thread in this forum. It works now.
Anyone could explain why the SCN got prior to the level 0 backup is not recognized by restore/recovery phase? Thanks.

OBIA- Connection Problems ORA-00604 and ORA-02248

Hi,
i have an installation OBI Server, Presentation Services, and Scheduler on RH Linux 64Bit, Oracle 11 DB, OBI Admin on Win xp,
in online mode when i try import from Database i got following errors:ORA-00604 and ORA-02248
but i can Create ibots and i see with sqlplus the created ibots in the DB.
have anyone an idea, why the scheduler can read and write in the DB, but i cant read via Admintool, i try to connect the same db)
Thx

can you connect from Windows box using SQLPLUS? yes i can connect
are you using native connection in Admin tool or ODBC? I try to use Native (OCI) to connect the Oracle DB
check the above to eliminate the connectivity issues.

ORA-604 and ORA-4031 during installation of SAP

Hi,
I tried to install Oracle 10.2.0.2 on Windows 2003 with SAP R3E 47X2.
However, during the installation on the Database Load phases it pops up a ORA-604 and ORA-4031 error log. It was unable to completed the Database Load phase showed as R3 load jobs: running 1, waiting 0.
I tried to set the share pool in init.ora as shared_pool_size = 40000000. It still show up as shared memory issue.
The log shows as,
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: START OF LOG: 20081201110818
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
Compiled Dec 15 2005 22:22:21
E:\usr\sap\IDE\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Failed to register client info: orc=604
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=15)
(DB) ERROR: DDL statement failed
(TRUNCATE TABLE "DYNPSOURCE")
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select user#,type# from user...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201110858
Could anyone help me about it?
Thanks.

hi Nikhuj,
I reset the installation and however endup the installation still have an error. Please help me to check with the following:
SQL> connect system
Enter password:
ERROR:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
pool","select ts#,file#,block#,nvl(...","Typecheck","kgghtInit")
SQL> show parameters shared_pool;
NAME                   TYPE     VALUE
shared_pool_reserved_size   big integer 12881756
shared_pool_size         big integer 124M
SQL> alter system set shared_pool_size=40000000;
alter system set shared_pool_size=40000000
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04034: unable to shrink pool to specified size
As I had changed the parameter in initsmpl.ora shared pool from 10000000 to 40000000. The log as below was showing that:
SAPAPPL1.log:
Error accessing package DBMS_APPLICATION_INFO
Connected.
(IMP) INFO: import of LXE_PPX__1 completed (1 rows) #20081201200124
(DB) INFO: LXE_PPX__1~0 created #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=34)
(DB) ERROR: DDL statement failed
(CREATE INDEX "LXE_PPX__1~CNT" ON "LXE_PPX__1" ( "T_LANG" , "S_LANG" ,
"DOMATYP" , "DOMANAM" , "USAGECNT" ) TABLESPACE PSAPIDE STORAGE (INITIAL 0 NEXT
0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129
SAPAPPL2.log:
(DB) INFO: TCN2T~0 created #20081201200843
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "TCN41" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "PLNAW"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFIDNETZ" VARCHAR2(21) DEFAULT ' ' NOT NULL
, "FLG_ERF_H" VARCHAR2(3) DEFAULT ' ' NOT NULL , "ESOKZ" VARCHAR2(3) DEFAULT ' '
NOT NULL , "EKORG" VARCHAR2(12) DEFAULT ' ' NOT NULL , "KSTAR_FRMD" VARCHAR2(30)
DEFAULT ' ' NOT NULL , "STEUS_WORK" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"STEUS_FRMD" VARCHAR2(12) DEFAULT ' ' NOT NULL , "STEUS_PRIM" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "KSTAR_COST" VARCHAR2(30) DEFAULT ' ' NOT NULL ,
"KSTAR_SERV" VARCHAR2(30) DEFAULT ' ' NOT NULL , "STEUS_SERV" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "DAUNE" VARCHAR2(9) DEFAULT ' ' NOT NULL , "ARBEH"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "WAERS" VARCHAR2(15) DEFAULT ' ' NOT NULL ,
"SLWID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "LVARI" VARCHAR2(6) DEFAULT ' ' NOT
NULL , "INDET" VARCHAR2(3) DEFAULT ' ' NOT NULL , "BUKRS" VARCHAR2(12) DEFAULT '
' NOT NULL , "AOB_KEY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "VORNR_DEL" VARCHAR2
(12) DEFAULT ' ' NOT NULL , "TERKZ" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AUART"
VARCHAR2(12) DEFAULT ' ' NOT NULL , "WERKS" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"DISPO" VARCHAR2(9) DEFAULT ' ' NOT NULL , "RSCHL_OFER" VARCHAR2(18) DEFAULT ' '
NOT NULL , "RSCHL_OFRD" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFER"
VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFRD" VARCHAR2(18) DEFAULT ' ' NOT
NULL , "RSCHL_OCST" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UCST" VARCHAR2(18)
DEFAULT ' ' NOT NULL , "GR_PRF_GR" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"GR_PRF_NAM" VARCHAR2(36) DEFAULT ' ' NOT NULL , "FHORI" VARCHAR2(9) DEFAULT ' '
NOT NULL , "NETSTUFE" VARCHAR2(6) DEFAULT '00' NOT NULL , "VAGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MSGTY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AOB_DARST"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "VRG_DARST" VARCHAR2(3) DEFAULT ' ' NOT NULL ,
"NO_DISP" VARCHAR2(3) DEFAULT ' ' NOT NULL , "COLKZ_ELEM" VARCHAR2(33) DEFAULT '
' NOT NULL , "COLKZ_TEIL" VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_MLST"
VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_DOKU" VARCHAR2(33) DEFAULT ' ' NOT
NULL , "COLKZ_MAT" VARCHAR2(33) DEFAULT ' ' NOT NULL , "VSPRF" VARCHAR2(21)
DEFAULT ' ' NOT NULL , "CLASF" VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFILE_ID"
VARCHAR2(30) DEFAULT ' ' NOT NULL , "BALK_PROF" VARCHAR2(36) DEFAULT ' ' NOT NULL
, "KBED" VARCHAR2(3) DEFAULT ' ' NOT NULL , "KKALKR" VARCHAR2(3) DEFAULT ' ' NOT
NULL , "LSTVAR" VARCHAR2(36) DEFAULT ' ' NOT NULL , "MATKL" VARCHAR2(27) DEFAULT
' ' NOT NULL , "MATEXIT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "EKGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MATKL_FRMD" VARCHAR2(27) DEFAULT ' ' NOT NULL ,
"EKGRP_FRMD" VARCHAR2(9) DEFAULT ' ' NOT NULL , "POSNR_MAT" VARCHAR2(12) DEFAULT
'0000' NOT NULL , "SCHED_END" VARCHAR2(3) DEFAULT ' ' NOT NULL , "SCEND_ACT"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "NT_SEARCH1" VARCHAR2(6) DEFAULT ' ' NOT NULL
, "NT_SEARCH2" VARCHAR2(6) DEFAULT ' ' NOT NULL , "NT_SEARCH3" VARCHAR2(6)
DEFAULT ' ' NOT NULL , "MFLIC" VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_FRMD"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_SERV" VARCHAR2(9) DEFAULT ' ' NOT NULL
, "KSTAR_MATVORPL" VARCHAR2(30) DEFAULT ' ' NOT NULL , "KZERB" VARCHAR2(3)
DEFAULT ' ' NOT NULL , "VALID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "VALID_VG"
VARCHAR2(21) DEFAULT ' ' NOT NULL , "SUBST" VARCHAR2(21) DEFAULT ' ' NOT NULL ,
"SUBST_VG" VARCHAR2(21) DEFAULT ' ' NOT NULL , "FPART" VARCHAR2(6) DEFAULT ' '
NOT NULL ) TABLESPACE PSAPIDE STORAGE (INITIAL 65536 NEXT 0000000040K MINEXTENTS
0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4040 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200843
SAPAPPL0.log:
(DB) INFO: PA0398~0 created #20081201200124
(DB) INFO: PA0399 created #20081201200124
(IMP) INFO: import of PA0399 completed (12 rows) #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "PA0399~0" ON "PA0399" ( "MANDT", "PERNR", "SUBTY",
"OBJPS", "SPRPS", "ENDDA", "BEGDA", "SEQNR" ) TABLESPACE PSAPIDE STORAGE (INITIAL
0 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129

ORA-01031, ORA-01034 and ORA-27101 .....very urgent pls help.

After I installed Oracle 8i Enterprise Edition on Win XP, default datanase was not creates so i tried manually creating it but it flashed this error while logging.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\oracle>SQLPLUS
SQL*Plus: Release 8.1.7.0.0 - Production on Wed Apr 30 20:09:50 2003
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Enter user-name: INTERNAL
Enter password:
ERROR:
ORA-01031: insufficient privileges
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist

U r getting ORA-01034 and ORA-27101 because ur database has not started.
try connecting svrmgrl as below
go to command prompt
svrmgrl
connect internal
startup pfile=<pfilename with full path>
Now logon to sqlplus and try to connect as system.

Error ORA-00604 AND ORA-00036

How to resolve ora error ORA-00604 and ORA-00036.
I am getting this error in alert.log:
ORA-00604: ERROR OCCURED AT RECURSIVE SQL LEVEL 51
ORA-00036: MAXIMUM NUMBER OF RECURSIVE SQL LEVELS (50) EXCEEDED.

Did someone create an 'after servererror' trigger?
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4018285967344
Read the part where he provides a query to find the trigger:
select owner, trigger_name
from dba_triggers
where trigger_type = 'AFTER EVENT';

Work around/Alternate solution for Oracle error ORA-01460 and ORA-02063

After the installation of Oracle.DataAccess version 2.111.7.20, I get the following error.(the code worked fine with Oracle.DataAccess version 9.2.0.700 )
I have attached the error as well as the sample code.
ORA-01460 and ORA-02063 are known bugs in the new ODP but would like to know if there is any Work around/Alternate solution for this problem(other than
the use of stored procs)..
Thanks!
Error:
ORA-01460: unimplemented or unreasonable conversion requested
ORA-02063: preceding line from BSREAD_STAGINGRO at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, Boolean bCheck)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
SampleCode
private bool isValidFieldData(string clientName, string fieldNumber, string uniqueID, string clientID)
using (OracleConnection mBSConnection = new OracleConnection(mBSConnectionString))
OracleDataReader oRdr = null;
OracleCommand Valid_FieldData_Command = null;
try
Valid_FieldData_Command = new OracleCommand();
Valid_FieldData_Command.Connection = mBSConnection;
Valid_FieldData_Command.CommandText = "SELECT uniqueid FROM EXTDB.BSData WHERE agencyid = :agencyid and agencyname=:agencyname AND fieldnumber =:fieldnumber AND uniqueid = :uniqueid";
Valid_FieldData_Command.Parameters.Add(":agencyid", OracleDbType.Varchar2, 255).Value = agencyID;
Valid_FieldData_Command.Parameters.Add(":agencyname", OracleDbType.Varchar2, 255).Value = agencyName;
Valid_FieldData_Command.Parameters.Add(":fieldnumber", OracleDbType.Varchar2, 255).Value = fieldNumber;
Valid_FieldData_Command.Parameters.Add(":uniqueid", OracleDbType.Varchar2, 255).Value = uniqueID;
mBSConnection.Open();
oRdr = Valid_FieldData_Command.ExecuteReader(); ->Error occurs here
The error occurs whenever the length of any of the parameter is increased. But there is no specific length where it is breaking down.
For example in this case, it breaks down with the given error if
agencyID > 8
agencyName > 6
fieldNumber > 9
uniqueid > 6

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

ORA-03113 and ORA-03114

Similar Messages

Maybe you are looking for