ORA-03113 END OF COMMUNICATION CHANNEL

Iam trying to install 0racle 8.1.7 on an NT server machine with SP6a.During the installation while the database is created I get the following error:
ORA0-03113 end of communication channel.
I have performed the installation (after unistalling, cleaning the registry ) 3 times and even have taken the machine off the network, but the same error occurs.
I have installed 8.1.7 on another machine and never had this problem.
Any ideas what is happenning?
Thanks in advance

ORA-03113: end-of-file on communication channel
I saw this when running the "Database Configuration Assistant" and "sqlplus". When the "Database Configuration Assistant" gave me this error during Oracle 9i (9.2.0) installation on Red Hat 2.1 AS, I simply removed the shared memory segments owned
by the Oracle user and I restarted the "Database Configuration Assistant". I'm not sure if this is the right way but it always worked for me. Here is what I did to get the "Database Configuration Assistant" running again:
I executed the ipcs command to get the address of the shared memory segments that have been allocated by Oracle:
# ipcs
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x00000000 0 root 600 196608 2
0x00000001 32769 root 600 655360 2
0x00000000 458755 oracle 660 4194304 0
0x00000000 491524 oracle 660 33554432 0
0x00000000 524293 oracle 660 33554432 0
0x00000000 557062 oracle 660 33554432 0
0x00000000 589831 oracle 660 33554432 0
0x00000000 622600 oracle 660 33554432 0
0x00000000 655369 oracle 660 33554432 0
0x00000000 688138 oracle 660 33554432 0
0x3ecee0b0 720907 oracle 660 4194304 0
------ Semaphore Arrays --------
key semid owner perms nsems status
------ Message Queues --------
key msqid owner perms used-bytes messages
Then I removed all shared memory segments that were owned by the Oracle user during the installation with the following command:
# ipcrm shm 458755 491524 524293 557062 589831 622600 655369 688138 720907
After that I restarted the "Database Configuration Assistant". Once the installation was done I immediately restarted the DB as well.
Caveat: I'm not sure if this procedure can cause any other problems if it's done during the installation.
But if you get this problem in connection with sqlplus, then simply make sure that the database is down and exit sqlplus. After that, follow the procedure above by removing all shared memory segments that belong to the Oracle user. To my knowledge,
this should not cause any problems.

Similar Messages

Problem with ORA -03113 End of Communication Channel

Hello,
Oracle Database 10g Release 10.2.0.1.0 - Production
Windows Server 2003 Version V5.2 Service Pack 2
Im having this problem when executing an stored procedure that executes a SQL statement wich has uses db links... I get this end of communication channel error.. so I thought it was a network issue, but all connections are fine.
The thing is that the procedure works fine, but just out of the nothing starts to give that problem, shutting down the database would not correct the problem, only restarting the server will fix the issue temporarily. I checked the dump file related to the process am running and I found this, I think it might be like a memory problem but not sure
Windows thread id: 5632, image: ORACLE.EXE (J002)
*** ACTION NAME:() 2010-09-01 09:18:59.490
*** MODULE NAME:() 2010-09-01 09:18:59.490
*** SERVICE NAME:(SYS$USERS) 2010-09-01 09:18:59.490
*** SESSION ID:(545.34045) 2010-09-01 09:18:59.490
*** 2010-09-01 09:18:59.490
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_kghalf+478] [PC:0x603BEB04] [ADDR:0x61E26AE8] [UNABLE_TO_WRITE] []
No current SQL statement being executed.
what do you recommend me to try here?

Hi Ogan,
I agree ! Of course we are often obliged to compose with minimal downtime, testing resources, editors, management, time etc.
I have the same problems but keeping the base version is a pain and if you consider 10.2.0.5 you won't have to install many patchsets after this one on the 10gR2 homes/databases. It's a "good" investment if you have to keep the 10gR2 for several years (going to 11g is more difficult than installing a patchset !)
Oracle patchsets are great and well tested and if you pay your Oracle license you pay for that ! The patchsets, patchset updates, support make the difference with the versions you can download "freely" on OTN.
Best regards
Phil

ORA-03113 end-of-communication channel (Oracle8.1.6, Powerbuilder)

I have an Oracle server 8.1.6 sitting in California.
There's a group in Cleveland accessing our Oracle server (directly to the IP address) through several different applications (Crystal Reports v.8, Powerbuilder application v.7).
Regardless of what they use, they are constantly getting the ORA-03113 error after about 5 minutes of inactivity.
They do not have any problems connecting to Oracle, it's only after some minutes of inactivity.
In california however we never get this ORA-03113 problem (using same Oracle database, same Powerbuilder application etc).
I don't know if this is useful but here's what the database profile in Powerbuilder looks like:
[Database]
DBMS=O84 ORACLE 8.0.4
ServerName=DB_ORACLE
Database=DB_ORACLE
UserID=
DatabasePassword=
LogId=login
LogPassword=passwd
DbParm=
Thanks for any help.
Tina

The ORA-03113 indicates that either the client or the server has taken some action to close an active connection. This most commonly occurs when a query exceeds a time threshold and is cancelled by the ODBC driver. By default, ODBC doesn't impose a statement timeout, but many applications which use ODBC do. From your post, however, I'm not sure this is a plausible explanation for your problem... When you say "5 minutes of inactivity", are you referring to the application being completely idle for 5 minutes or are you referring to the application chugging on a query for 5 minutes and then generating the error?
Depending on how the network is configured, it may be that the Oracle server is erroneously determining that the Cleveland connections have been abandoned. I have no idea what the mechanics of this would be-- I'm just assuming that such a capability must exist, and guessing that it might have problems with connections where there's a high latency or network wierdness. You might try disabling connection pooling for the Oracle ODBC driver (in the ODBC Data Source Administrator). That will force ODBC to create new connections to the database, rather than holding on to old connections for reuse. If it works, there will likely be a performance hit because of this.
Justin

ORA-03113 End of communication channgel

It's strange one particular sql statement is causing the issues. It's going across link on one table ( PS_RNA_FO_CONTACT ), which is a link to another database from HR.
Below is the statement comes back with ORA-03113 with end of comminication channel with a core dump creating in the database, if we run in toad or sqlplus.
SELECT A.FIRST_NAME || ' ' || A.LAST_NAME ,C.FIRST_NAME || ' ' || C.LAST_NAME ,A.JOBTITLE ,B.NAME1 ,A.STATE ,( SELECT URL FROM PSURLDEFN WHERE URL_ID= 'RNA_HRS_ONBRD_VIDEO') AS URL FROM sysadm.PS_RNA_OB_INVITE A ,PS_CUSTOMER B ,sysadm.PS_RNA_FO_CONTACT C WHERE A.RNA_OB_INVITN_ID=:1 AND B.SETID='SHARE' AND B.CUST_ID=A.CUST_ID AND C.SETID=B.SETID AND C.CONTACT_ID=A.CONTACT_ID AND C.EFFDT=( SELECT MAX(Z.EFFDT) FROM sysadm.PS_RNA_FO_CONTACT Z WHERE C.SETID=Z.SETID AND C.CONTACT_ID=Z.CONTACT_ID)
I dropped the database link, synonym and recreated it, still no success but,
the following work arounds work fine.
1. If I create a view on the same table and use the view comes back fine fine.
2. If bind variable is hard coded with some value, query returns
3. If SELECT URL FROM PSURLDEFN WHERE URL_ID= 'RNA_HRS_ONBRD_VIDEO' is taken out of the select and joined in the where clause works fine, but that would bring cartesian product as there is no joining key.
I opened up a case with Oracle, but if any body can shed some light, will be helpful.

It will almost certainly be a bug.
On one of the databases you should have an alert log entry detailing a trace file which will have further information related probably to an underlying ORA-00600 or ORA-07445.
The additional information in the trace file can be used in the Oracle Support online ORA-00600/07445 lookup tool.

ORA-03113 end of communicatiob channel

Hello,
what can I do, to solfe the problem ORA-03113?

Hello,
what can I do, to solfe the problem ORA-03113?

ORA-03013 end-of-communication channel.

Hi all,
When I am starting ORACLE database, I am gettting this error. Database and client in same M/C.
This my trace files.
File is here.
+++++++++++++++++++++++++++++++++++++++++++++
Dump file /ora/app/oracle/admin/dbcss2/bdump/lgwr_1377.trc
Oracle8i Release 8.1.5.0.0 - Production
With the Java option
PL/SQL Release 8.1.5.0.0 - Production
ORACLE_HOME = /ora/app/oracle/product/8.1.5
System name: OSF1
Node name: css2
Release: V4.0
Version: 1229
Machine: alpha
Instance name: dbcss2
Redo thread mounted by this instance: 1
Oracle process number: 4
Unix process pid: 1377, image: oracle@css2 (LGWR)
*** SESSION ID:(3.1) 2000.05.29.14.37.36.794
error 19502 detected in background process
+++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++
Mon May 29 15:12:50 2000
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.5.0.0.
System parameters with non-default values:
processes = 30
shared_pool_size = 15728640
java_pool_size = 20971520
control_files = /ora/app/oracle/oradata/dbcss2/control01.ctl, /ora/app/oracle/oradata/dbcss2/control02.ctl
db_block_buffers = 8192
db_block_size = 2048
compatible = 8.1.0
log_buffer = 163840
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
rollback_segments = r01, r02, r03, r04
remote_login_passwordfile= EXCLUSIVE
db_domain = aitg
distributed_transactions = 10
service_names = dbcss2.aitg
instance_name = dbcss2
mts_dispatchers = (ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))(DIS=1)(SES=254)(CON=254)(TIC=15)(POO=NO)(MUL=NO)(LIS=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=PNPKEY))(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1) (PORT=1521))(ADDRESS=(PROTOCOL=IPC)(KEY=dbcss2.aitg))))(PRE=oracle.aurora.server.SGiopServer)
mts_servers = 1
open_links = 4
db_name = dbcss2
os_authent_prefix =
job_queue_processes = 0
job_queue_interval = 60
background_dump_dest = /ora/app/oracle/admin/dbcss2/bdump
user_dump_dest = /ora/app/oracle/admin/dbcss2/udump
core_dump_dest = /ora/app/oracle/admin/dbcss2/cdump
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon May 29 15:12:51 2000
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network protocol '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon May 29 15:12:51 2000
ALTER DATABASE MOUNT
Mon May 29 15:12:58 2000
Successful mount of redo thread 1, with mount id 2628854010.
Mon May 29 15:12:58 2000
Database mounted in Exclusive Mode.
Completed: ALTER DATABASE MOUNT
Mon May 29 15:12:59 2000
ALTER DATABASE OPEN
Picked Lamport Server scheme to generate SCNs
Mon May 29 15:12:59 2000
Rolling back half complete log switch of thread 1
LGWR: terminating instance due to error 19502
Instance terminated by LGWR, pid = 1516
+++++++++++++++++++++++++++++++++++++++++++++
What is this error 19502? Howe can I solve this one?
null

Hi all,
When I am starting ORACLE database, I am gettting this error. Database and client in same M/C.
This my trace files.
File is here.
+++++++++++++++++++++++++++++++++++++++++++++
Dump file /ora/app/oracle/admin/dbcss2/bdump/lgwr_1377.trc
Oracle8i Release 8.1.5.0.0 - Production
With the Java option
PL/SQL Release 8.1.5.0.0 - Production
ORACLE_HOME = /ora/app/oracle/product/8.1.5
System name: OSF1
Node name: css2
Release: V4.0
Version: 1229
Machine: alpha
Instance name: dbcss2
Redo thread mounted by this instance: 1
Oracle process number: 4
Unix process pid: 1377, image: oracle@css2 (LGWR)
*** SESSION ID:(3.1) 2000.05.29.14.37.36.794
error 19502 detected in background process
+++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++
Mon May 29 15:12:50 2000
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.5.0.0.
System parameters with non-default values:
processes = 30
shared_pool_size = 15728640
java_pool_size = 20971520
control_files = /ora/app/oracle/oradata/dbcss2/control01.ctl, /ora/app/oracle/oradata/dbcss2/control02.ctl
db_block_buffers = 8192
db_block_size = 2048
compatible = 8.1.0
log_buffer = 163840
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
rollback_segments = r01, r02, r03, r04
remote_login_passwordfile= EXCLUSIVE
db_domain = aitg
distributed_transactions = 10
service_names = dbcss2.aitg
instance_name = dbcss2
mts_dispatchers = (ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))(DIS=1)(SES=254)(CON=254)(TIC=15)(POO=NO)(MUL=NO)(LIS=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=PNPKEY))(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1) (PORT=1521))(ADDRESS=(PROTOCOL=IPC)(KEY=dbcss2.aitg))))(PRE=oracle.aurora.server.SGiopServer)
mts_servers = 1
open_links = 4
db_name = dbcss2
os_authent_prefix =
job_queue_processes = 0
job_queue_interval = 60
background_dump_dest = /ora/app/oracle/admin/dbcss2/bdump
user_dump_dest = /ora/app/oracle/admin/dbcss2/udump
core_dump_dest = /ora/app/oracle/admin/dbcss2/cdump
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon May 29 15:12:51 2000
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network protocol '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon May 29 15:12:51 2000
ALTER DATABASE MOUNT
Mon May 29 15:12:58 2000
Successful mount of redo thread 1, with mount id 2628854010.
Mon May 29 15:12:58 2000
Database mounted in Exclusive Mode.
Completed: ALTER DATABASE MOUNT
Mon May 29 15:12:59 2000
ALTER DATABASE OPEN
Picked Lamport Server scheme to generate SCNs
Mon May 29 15:12:59 2000
Rolling back half complete log switch of thread 1
LGWR: terminating instance due to error 19502
Instance terminated by LGWR, pid = 1516
+++++++++++++++++++++++++++++++++++++++++++++
What is this error 19502? Howe can I solve this one?
null

ORA-03113 : end-of-file on communication channel while running a SQL Query

Hi,
While executing the following query, we are facing ORA-03113 : EOF on communication channel error.
SELECT
FROM QDF_CLSS_SHENG_HIST
/*WHERE* a.FACT_TYPE_CODE='BS'
AND */
WHERE (SRCE_SYS_ID = 850 OR (SRCE_SYS_ID IN (1747,1764) AND GEO_ID IN (826,372) AND PRTTN_BY_FUNC_DATE>=to_date('20060701','YYYYMMDD') ))
When we remove one of the values in the SRCE_SYS_ID's 'IN' condition the error is not thrown, e.g.
WHERE (SRCE_SYS_ID = 850 OR (SRCE_SYS_ID IN (1747) AND GEO_ID IN (826,372) AND PRTTN_BY_FUNC_DATE>=to_date('20060701','YYYYMMDD') ))
The version of the Database we are using is 10.2.0.3.0 - 64bi. Is this a common error in this version of the database because when we ran the same query in a 9i database we got no such error.
P.S : QDF_CLSS_SHENG_HIST table is partitioned on SRCE_SYS_ID and PRTTN_BY_FUNC_DATE
Thanks,
Puneeth

Yes, we get the same error and no dumps are getting created.It might be interesting to look at a trace file for this SQL statement with event 10046 at level 12 and event 10053 at level 1 enabled for the session. You may need to modify the query slightly to make certain that a hard parse is required (possibly by specifying a couple of the column names to be returned rather than *). Take a look through the raw trace file for something like this
cost: -1.#IND card: 1.#INFThere is at least one query in the ERP package that I use that will output the following in a 10053 trace when optimizer_features_enable is greater than 10.1.0.4, followed by an ORA-600:
Access Path: index (AllEqUnique)
    Index: SYS_C004588
    resc_io: 1.00 resc_cpu: 8341
    ix_sel: 0.5 ix_sel_with_filters: 0.5
    NL Join: Cost: 1.#J Resp: 1.#J Degree: 1
      Cost_io: 1.#J Cost_cpu: 1
      Resp_io: 1.#J Resp_cpu: 1
Best NL cost: 1797693134862315700000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000.00
          resc: 3.01 resc_io: 3.00 resc_cpu: 35947
          resp: 3.01 resp_io: 3.00 resp_cpu: 35947
Outer Join Card: 1.#J = max ( outer (1.#J), (outer (1.#J) * inner (2.00) * sel (0.5) )
Join Card - Rounded: 1 Computed: 1.#JYou may be experiencing a similar problem that might become evident with both trace events enabled.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Convrtd to Invterval Part- ORA-03113: end-of-file on communication channel

Hi all,
I had a table as Interval Partitioned. In order to create XML- Xpath indexes on it, I converted it to Range Partitioned table.
I am able to create the XPATH indexes but I get the error: ORA-03113: end-of-file on communication channel
- When I revert the code to Interval Partitioned without the XMLIndex, it works fine(although takes time as no XML Index)
- When I convert table to non partitioned table, create the XML Index, it works fine.
But I need the partitons, so when I create the partitioned table I get the error.
CREATE TABLE INT_PART_TABLE
DB_ID VARCHAR2(10 BYTE),
xML_mESSAGE SYS.XMLTYPE,
LOAD_TIMESTAMP TIMESTAMP(6)
XMLTYPE xML_mESSAGE STORE AS BINARY XML
PARTITION BY RANGE (LOAD_TIMESTAMP)
PARTITION MAX VALUES LESS THAN (TIMESTAMP' 2013-06-01 00:00:00')
TABLESPACE CSTR_STG_DATA
NOCOMPRESS
NOCACHE
ENABLE ROW MOVEMENT;
BEGIN
DBMS_XMLINDEX.dropparameter('Indx_Par');
END;
BEGIN
DBMS_XMLINDEX.REGISTERPARAMETER(
'Indx_Par',
'PATH TABLE Table1
PATHS (INCLUDE ( /abc:field1/xyz:field2
/abc:field1/def:field2
NAMESPACE MAPPING ( xmlns:abc="ABCD"
xmlns:def="DEFG"
xmlns:xyz="XYZA"
end;
create index INDX_XPATHS on "INT_PART_TABLE" (XML_MESSAGE) indextype is xdb.xmlindex
parameters ('PARAM Indx_Par') local;
Now if I execute the following statement in
SELECT T.xML_mESSAGE
FROM INT_PART_TABLE1 T
WHERE XMLEXISTS (
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'
PASSING T.xML_mESSAGE AS "p");
- Is there any other way of writing this Select statement, which may work?
- Any other thing I need to take care of when defining the table and partitions script so that I don't get this error?

Hi,
I think it's time you give a clear (and working) test case so that we can safely try to reproduce the issue.
What you've given so far has syntax error and name mismatch.
So please :
- database version (SELECT * FROM v$version)
- complete sequence of DLLs
- some sample XML documents (it doesn't have to be the real ones, but at least something realistic)
Thanks in advance.
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'Why all that stuff? You don't have to return a boolean.
The following works for me on 11.2.0.3 :
SQL> CREATE TABLE int_part_table (
2    db_id          VARCHAR2(10)
3 , xml_message    XMLTYPE
4 , load_timestamp TIMESTAMP
5 )
6 XMLTYPE xml_message STORE AS BINARY XML
7 PARTITION BY RANGE (load_timestamp) (
8    PARTITION MAX VALUES LESS THAN (timestamp '2013-06-01 00:00:00')
9 )
10 NOCOMPRESS
11 NOCACHE
12 ENABLE ROW MOVEMENT;
Table created
SQL> insert into int_part_table values (1, xmltype('<main><id>144283</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>9085802</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>1</id></main>'), sysdate);
1 row inserted
SQL> commit;
Commit complete
SQL> create index int_part_table_uix on int_part_table (xml_message)
2 indextype is xdb.xmlindex
3 parameters (
4 'PATH TABLE INT_PART_TABLE_PT
5 PATHS ( INCLUDE ( /main/id ) )')
6 local;
Index created
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4         '/main[id=("144283","9085802")]'
5         PASSING xml_message
6       )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3517234298
| Id | Operation                              | Name                         | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                       |                              |     1 |   155 |    34   (6)| 00:00:01 |       |       |
|   1 | NESTED LOOPS                          |                              |     1 |   155 |    34   (6)| 00:00:01 |       |       |
|   2 |   VIEW                                 | VW_SQ_1                      |     1 |    25 |    32   (4)| 00:00:01 |       |       |
|   3 |    HASH UNIQUE                         |                              |     1 |    47 |         |             |       |       |
|* 4 |     HASH JOIN SEMI                     |                              |     1 |    47 |    32   (4)| 00:00:01 |       |       |
|   5 |      PARTITION SYSTEM SINGLE           |                              |     2 |    90 |     2   (0)| 00:00:01 |     1 |     1 |
|* 6 |       TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     2 |    90 |     2   (0)| 00:00:01 |     1 |     1 |
|* 7 |        INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
|   8 |      COLLECTION ITERATOR PICKLER FETCH | XQSEQUENCEFROMXMLTYPE        | 8168 | 16336 |    29   (0)| 00:00:01 |       |       |
|* 9 |   TABLE ACCESS BY USER ROWID           | INT_PART_TABLE               |     1 |   130 |     1   (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
   4 - access("SYS_P3"."VALUE"=SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0) AND
              SUBSTRB("VALUE",1,1599)=SUBSTRB(SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0),1,1599))
   6 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
   7 - access("SYS_P3"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P3"."PATHID"=HEXTORAW('704E') )
   9 - filter("ITEM_6"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))
Note
   - Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4         '/main[id="144283" or id="9085802"]'
5         PASSING xml_message
6       )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3748936130
| Id | Operation                                | Name                         | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                         |                              |     1 |   155 |    11 (10)| 00:00:01 |       |       |
|   1 | NESTED LOOPS                            |                              |     1 |   155 |    11 (10)| 00:00:01 |       |       |
|   2 |   VIEW                                   | VW_SQ_1                      |     2 |    50 |     8   (0)| 00:00:01 |       |       |
|   3 |    HASH UNIQUE                           |                              |     2 |   180 |         |             |       |       |
|   4 |     CONCATENATION                        |                              |       |       |         |             |       |       |
|   5 |      NESTED LOOPS                        |                              |       |       |         |             |       |       |
|   6 |       NESTED LOOPS                       |                              |     1 |    90 |     4   (0)| 00:00:01 |       |       |
|   7 |        PARTITION SYSTEM SINGLE           |                              |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 8 |         TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 9 |          INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
| 10 |        PARTITION SYSTEM SINGLE           |                              |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 11 |         INDEX RANGE SCAN                 | SYS117585_INT_PART__PIKEY_IX |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 12 |       TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
| 13 |      NESTED LOOPS                        |                              |       |       |         |             |       |       |
| 14 |       NESTED LOOPS                       |                              |     1 |    90 |     4   (0)| 00:00:01 |       |       |
| 15 |        PARTITION SYSTEM SINGLE           |                              |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 16 |         TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 17 |          INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
| 18 |        PARTITION SYSTEM SINGLE           |                              |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 19 |         INDEX RANGE SCAN                 | SYS117585_INT_PART__PIKEY_IX |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 20 |       TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 21 |   TABLE ACCESS BY USER ROWID             | INT_PART_TABLE               |     1 |   130 |     1   (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
   8 - filter("SYS_P5"."VALUE"='9085802' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='9085802')
   9 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
11 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
              "SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
       filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
              TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
              D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
12 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
16 - filter("SYS_P5"."VALUE"='144283' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='144283' AND
              (LNNVL("SYS_P5"."VALUE"='9085802') OR LNNVL("SYS_P5"."PATHID"=HEXTORAW('704E') ) OR
              LNNVL(SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1) OR LNNVL(SUBSTRB("VALUE",1,1599)='9085802')))
17 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
19 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
              "SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
       filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
              TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
              D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
20 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
21 - filter("ITEM_2"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))I asked in one of your other threads if /main/id was unique per XML document.
If so, you can use a simple function-based index instead of the XMLIndex :
SQL> drop index int_part_table_uix;
Index dropped.
SQL> create index int_part_table_ix1 on int_part_table (
2    xmlcast(
3      xmlquery('/main/id' passing XML_MESSAGE returning content)
4      as varchar2(10)
5    )
6 );
Index created.
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLCast(
4          XMLQuery('/main/id' PASSING xml_message RETURNING CONTENT)
5          AS VARCHAR2(10)
6        )
7 IN ('144283', '9085802');
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 2864653096
| Id | Operation                           | Name               | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
|   0 | SELECT STATEMENT                    |                    |     2 |   236 |     2   (0)| 00:00:01 |       |       |
|   1 | INLIST ITERATOR                    |                    |       |       |            |       | |       |
|   2 |   TABLE ACCESS BY GLOBAL INDEX ROWID| INT_PART_TABLE     |     2 |   236 |     2   (0)| 00:00:01 |     1 |     1 |
|* 3 |    INDEX RANGE SCAN                 | INT_PART_TABLE_IX1 |     2 |       |     1   (0)| 00:00:01 |       |       |
Predicate Information (identified by operation id):
   3 - access(CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944) AS
              varchar2(10)   )='144283' OR CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944
              ) AS varchar2(10)   )='9085802')

Error ORA-03113: end-of-file on communication channel in droppping a table

Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna Zanetti

Good morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti

ORA-03113: end-of-file on communication channel while executing a query

Hi all,
I am getting following error while executing one of the query.
ORA-03113: end-of-file on communication channel
The query involves subqueries. At one point, in the second last condition of the whole query is the cause. what makes the query to disconnect from database.
I am pasting the whole query with highlighted part causing the error.
select
A.Num_Employee_Id as col_0_0_,
A.Str_Name_For_Reports as col_1_0_
from
Est_Esb_employee_m A
where
A.num_office_id=1
and A.Num_Employee_Id not in
(select
B.Num_Employee_Id
from
Est_Esb_Employee_Service_D B
where
B.Chr_Curr_Status='N'
and
B.Dat_Effective_Date is not null
and
B.Dat_Effective_Date=
(select
max(C.Dat_Effective_Date)
from
Est_Esb_Employee_Service_D C
where
C.Num_Employee_Id=B.Num_Employee_Id
and C.Dat_Effective_Date is not null
and B.Num_Transaction_Id=
(select
max(D.Num_Transaction_Id)
from
Est_Esb_Employee_Service_D D
where
D.Dat_Effective_Date=
(select
max(E.Dat_Effective_Date)
from
Est_Esb_Employee_Service_D E
where
Num_Employee_Id=D.Num_Employee_Id
and D.Num_Employee_Id=B.Num_Employee_Id
and B.Num_New_Office_Id=1
order by
A.Str_First_Name,
A.Str_Middle_Name,
A.Str_Last_Name
Awaiting your valuable suggestions.
Regards
Vijay Kumar

I would start by compareing the explain plan of both versions of the statement.
Also by adding such a restriction you might change from an uncorrelated subquery to a correlated subquery. I'm not sure, because your code is hardly readably without formatting.
In any case you seem to select again and again from the same table. Maybe you should find a way to optimize to query in terms of io (less table access). Then this problem could go away.

Error ORA-03113: end-of-file on communication channel (while starting db)

Hello everybody! :-)
Looks like a need help with Oracle 11gr2 (RHEL 6 x64). Faced with a problem while starting database:
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Dec 7 01:43:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 2538741760 bytes
Fixed Size 2216024 bytes
Variable Size 1828720552 bytes
Database Buffers 687865856 bytes
Redo Buffers 19939328 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6601
Session ID: 575 Serial number: 5
This is logfile (/u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/alert/log.xml):
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 28496896 bytes disk space from 5218762752 limit
</txt>
</msg>
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/ORCLDOCS1/archivelog/2012_12_07/o1_mf_1_249_%u_.arc'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-16038: log 3 sequence# 249 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/orcldocs1/redo03.log'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>USER (ospid: 6881): terminating the instance due to error 16038
</txt>
</msg>
<msg time='2012-12-07T01:52:23.540+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Instance terminated by USER, pid = 6881
</txt>
</msg>
How can I resolve it, please advice. Thank you.
Edited by: user9001403 on 06.12.2012 5:58

Hi,
Looks like your archivelog space is exhausted. Increase the db_recovery_file_dest_size size and check.
SQL> show parameter db_recovery
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      /oracle/flash_recovery_area
db_recovery_file_dest_size           big integer 3882MRegards,
Anand.

ORA-03113: end-of-file on communication channel while running utlrp.sql

Hi All,
I am getting ORA-03113: end-of-file on communication channel while running utlrp.sql.
Actually I ran utlrp.sql before in my test database and terminated the session in middle after that when ever I am running utlrp.sql i am getting the above error.
how to resolve the issue.
Kiran

Hi,
Check as follows;
select owner,object_name,object_type from dba_objects where object_name like
'UTL%'The objects should only belong to SYS, if they do belong do some other user (example HR, etc). Drop objects belong to other users (not sys).
Then connect as sys as sysdba and rerun the script utlrp.sql.
You can also review Oracle Metalink Document: ORA-03113 Error When Executing Utlrp.sql: Doc ID: Note:413922.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:5496440446026841247::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,413922.1,1,1,1,helvetica
Adith

Context Index World Lexer ORA-03113: end-of-file on communication channel

I have release 10g Release 1 (10.1.0.2.0) for Windows and trying to take advantage of the World Lexer.
My table is:
create table worldtest(
filename char(32),
content blob
I've created a preference for the WORLD_LEXER:
     begin
     ctx_ddl.create_preference('wlex', 'WORLD_LEXER');
     end;
Right now I'm working with 10,000 records of PDF, MS-Word, Text, and HTM documents. When I try and create a context index using this lexer:
create index i_ctx_wc on worldtest(content)
indextype is ctxsys.context
parameters ('lexer wlex');
The following error is returned, and I have to use drop index force to remove the index. Without 'Force' a message is return saying the index is an a loading state, but nothing is occuring.
create index i_ctx_wc on worldtest(content)
indextype is ctxsys.context
ERROR at line 1:
ORA-03113: end-of-file on communication channel
The indexing works fine when I leave the world lexer preference out.
Any suggestions would be wonderful. I've been banging my head on this one for a while.
Thanks.

Hi,
I couldn't reproduce (different version which is perhaps the problem). Check out bug 4056162. ORA-3113 related to the use of the world lexer. The resolution is not published externally, so no help there, but the bug is closed so perhaps support can provide some insight.
Thanks.

EAL extract fails with ORA-03113 end-of-file on communication channel error

Hi,
We are trying to run an EAL (v11.1.1.4) extract from an HFM (v9.3.1.4) environment onto Oracle database. We are able to run the extract successfully for few hundred records, but when the records exceeds 10 million we get the error below
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13579: Cannot execute statement for insert
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03113: end-of-file on communication channel;Process ID: 16323;Session ID: 15 Serial number: 8288; (code=3113)) [rec#1]
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13580: Cannot rollback
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03114: not connected to ORACLE; (code=3114)) [rec#1]
[03 Dec 2011 06:02:41] [dbmgr] WARN : HR#13674: Data move region job failed: HR#00000: some operations failed, see details in the log file; 81877900 cell(s) processed in 70348 second(s)
We checked on the DB and the Oracle session that was doing the insert was open even after the extract failed with the above error.
Any idea what could be causing this??
Thanks
Ramya Suresh

Hi,
I was able to fix this issue.
From the trace file identified the related objects and validated them.
More details can be found in below MOS note.
[ID 421711.1]--Understanding and Diagnosing ORA-00600 [17069] Errors
Thanks for all the inputs...

ORA-03113: end-of-file on communication channel

Hi
While I startup Oracle database, i get the following error. What could be the issue and how to resolve this.
SQL> startup
ORACLE instance started.
Total System Global Area 864333824 bytes
Fixed Size 2231368 bytes
Variable Size 704644024 bytes
Database Buffers 150994944 bytes
Redo Buffers 6463488 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6507
Session ID: 580 Serial number: 5
Below is the content from alert log and trace log
*#alert_orcl.log#*
Bad header found during crash/instance recovery
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080f01b (file 2, block 61467)
Data in bad block:
type: 255 format: 2 rdba: 0x0000a2ff
last change scn: 0x0000.0080019f seq: 0x0 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x4ff
consistency value in tail: 0x643e0346
check value in block header: 0x0
Read datafile mirror 'ASM5' (file 2, block 61467) found same corrupt data (no logical check)
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080019f (file 2, block 415)
Read datafile mirror 'ASM4' (file 2, block 415) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 61467) found same corrupt data (no logical check)
Hex dump of (file 2, block 34539) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008086eb (file 2, block 34539)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008086eb seq: 0x0 flg: 0x00
Read datafile mirror 'ASM3' (file 2, block 415) found same corrupt data (no logical check)
spare1: 0xbb spare2: 0xe1 spare3: 0x4ff
consistency value in tail: 0x02c20304
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008086eb (file 2, block 34539)
Read datafile mirror 'ASM2' (file 2, block 34539) found same corrupt data (no logical check)
Hex dump of (file 2, block 420) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x008001a4 (file 2, block 420)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 2 rdba: 0x0000a206
last change scn: 0xe1f3.008001a4 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x474f4c20
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008001a4 (file 2, block 420)
Read datafile mirror 'ASM4' (file 2, block 420) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 34539) found same corrupt data (no logical check)
Read datafile mirror 'ASM3' (file 2, block 420) found same corrupt data (no logical check)
Hex dump of (file 1, block 3097) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 2 format: 6 rdba: 0x0000a202
last change scn: 0x0000.00400c19 seq: 0x0 flg: 0x00
spare1: 0xdf spare2: 0xe2 spare3: 0x4ff
consistency value in tail: 0x09c10280
check value in block header: 0x0
Hex dump of (file 2, block 34765) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc block checksum disabled
Corrupt block relative dba: 0x008087cd (file 2, block 34765)
Reading datafile '+DATA/orcl/datafile/system.256.762570243' for corruption at rdba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe27b.008087cd seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
Read datafile mirror 'ASM5' (file 1, block 3097) found same corrupt data (no logical check)
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087cd (file 2, block 34765)
Read datafile mirror 'ASM3' (file 2, block 34765) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 1, block 3097) found same corrupt data (no logical check)
Hex dump of (file 3, block 272) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Reading datafile '+DATA/orcl/datafile/undotbs1.258.762570243' for corruption at rdba: 0x00c00110 (file 3, block 272)
Read datafile mirror 'ASM1' (file 3, block 272) found same corrupt data (logically corrupt)
Read datafile mirror 'ASM5' (file 2, block 34765) found same corrupt data (no logical check)
Hex dump of (file 2, block 34771) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008087d3 (file 2, block 34771)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008087d3 seq: 0x0 flg: 0x00
spare1: 0x3a spare2: 0xe3 spare3: 0x4ff
consistency value in tail: 0x00045055
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087d3 (file 2, block 34771)
Read datafile mirror 'ASM3' (file 2, block 34771) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 3, block 272) found same corrupt data (logically corrupt)
RECOVERY OF THREAD 1 STUCK AT BLOCK 272 OF FILE 3
Read datafile mirror 'ASM5' (file 2, block 34771) found same corrupt data (no logical check)
Wed Jun 27 05:49:55 2012
Hex dump of (file 2, block 65353) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff49 (file 2, block 65353)
Bad header found during buffer corrupt after write
Data in bad block:
type: 1 format: 6 rdba: 0x0000a206
last change scn: 0xe2bf.0080ff49 seq: 0x74 flg: 0x00
spare1: 0xf5 spare2: 0xe0 spare3: 0x602
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff49 (file 2, block 65353) found different data
Hex dump of (file 2, block 65356) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff4c (file 2, block 65356)
Bad header found during buffer corrupt after write
Data in bad block:
type: 2 format: 6 rdba: 0x0000a206
last change scn: 0xe2a7.0080ff4c seq: 0x74 flg: 0x00
spare1: 0xbf spare2: 0xe2 spare3: 0x602
consistency value in tail: 0x00000059
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff4c (file 2, block 65356) found different data
Hex dump of (file 2, block 66114) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292893):
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9, _wordcopy_bwd_dest_aligned()+185] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293021):
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 2]
Wed Jun 27 05:49:59 2012
Dumping diagnostic data in directory=[cdmp_20120627054959], requested by (instance=1, osid=6831 (P000)), summary=[incident=293021].
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293022):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293022/orcl_p000_6831_i293022.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292894):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Dumping diagnostic data in directory=[cdmp_20120627055004], requested by (instance=1, osid=6713 (DBW0)), summary=[incident=292893].
Wed Jun 27 05:50:08 2012
PMON (ospid: 6679): terminating the instance due to error 471
Wed Jun 27 05:50:08 2012
ORA-1092 : opitsk aborting process
Wed Jun 27 05:50:08 2012
License high water mark = 4
Instance terminated by PMON, pid = 6679
USER (ospid: 6860): terminating the instance
Instance terminated by USER, pid = 6860
*#trace logs#*
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
kcra_dump_redo_internal: skipped for critical process
kcbz_try_block_recovery <1, 8454722>: tries=0 max=5 cur=1340797795 last=0
BH (0x7bbe0fc8) file#: 2 rdba: 0x00810242 (2/66114) class: 1 ba: 0x7b8f4000
set: 12 pool: 3 bsz: 8192 bsi: 0 sflg: 2 pwc: 0,0
dbwrid: 0 obj: 68150 objn: -1 tsn: 1 afn: 2 hint: f
hash: [0x912f45b0,0x912f45b0] lru-req: [0x7bbdfdb0,0x90deff60]
lru-flags: on_auxiliary_list
obj-flags: object_write_list
ckptq: [0x7bbfc4c8,0x7bbea0a8] fileq: [NULL] objq: [0x8b251480,0x8b251480] objaq: [0x8b251450,0x7bbe0e88]
st: INST_RCV md: NULL rsop: 0x90d110e0
flags: buffer_dirty being_written block_written_once recovery_resilver
recovery_read_complete
cr pin refcnt: 0 sh pin refcnt: 0
kcra_dump_redo_internal: skipped for critical process
Incident 292893 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident 292894 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []

Did you actually read the alert-log ??
The problem is clear in there. Your datafiles are corrupted!!!
While the database is trying to correct these, a lot of ORA-00600 and ORA-07445's are generated.
Consult Oracle Support to get this resolved
Thanks
FJFranken

ORA-03113 END OF COMMUNICATION CHANNEL

Similar Messages

Maybe you are looking for