Ora-03114 error on solaris 8

hi
I am trying to install oracle 8.1.6 release 2 on a sun SPARC 64 bit machine with solaris 8. it has 250 MHz processor and 512 Mb ram.
the installation completes successfully but when DB configuration assistant starts to create the DB, i get the error message "ora-03114, not connected to ORACLE". I have also tried to perform a typical installation and i got the same error when creating the default DB.
At first, i had set the kernel parameters according to the installation guide but then i changed the semmns parameter to 2000. it had no effect. Creating the DB by gui or using the script does not change the result. I am sure about the environment variables and I have installed the latest kernel patch for solaris 8.
When i check the log files I see the following errors:
ora - 03113 end of file communication channel
ora - 03114 not connected to ORACLE
ora - 01034 ORACLE not available
please help!
Thanks
null

This is not the right forum to ask this question.
But this problem is tically raised by low operating system
resources such as semaphores and so on.
Look at the Readme file of the installation CD and correct it on
/etc/system file.
Best regards, Marcelo.

Similar Messages

  • ORA 03114 error

    ORA 03114 error 
    weblogic
    Forms 11g
    db 11g
    winserver 2008 64 bit

    I am sorry I didn't explain my problem Clearly
    My system   developed with  oracle forms 10g  & oracle database 10g    
    Using oracle application  server 10g with win server 2003 32 bit
    And It was works properly
    Now I upgrade my system  to oracle database 11g and weblogic  11g 
    with win server2008 64 bit
    and I tested it it is work no problems but som times when i run my application
    if give me this error
    frm-40735 unhandled exception ora-03114 
    and  ask for the username and password for database  when I give it is give the same error
    if  I  close my  Browser  and wait sometimes and try agine it is work
    why this error happen  ………………………….??????
    If anyone can help I would be grateful to him .
    Thanks

  • Ora-03114 error when using trigger on spatial field

    I have a table the has a lat and long field and an geometry field. I want to place a trigger so that as the users insert lat and long into the table it also populates those values into the geometry field. I built a trigger that is supposed to do this. Upon insert I get an ora-03114 error. I can run the same piece of pl/sql as a plain update statement. How do I solve this problem.
    the DB is 9.0.1.2 and is stuck thier because of some 3rd party tools.
    Aaron

    Hi,
    ORA-03114: not connected to ORACLE
    Cause: A call to Oracle was attempted when no connection was established. Usually this happens because a user-written program has not logged on. It may happen if communication trouble causes a disconnection. In addition, this message could occur when ALTER SYSTEM KILL SESSION or ALTER SYSTEM DISCONNECT SESSION were issued with the IMMEDIATE qualifier because, in those cases, the client's connection to the database is terminated without waiting for the client to issue a request.
    Check your client connection settings, your driver etc.
    regards, Andreas

  • Error during SP application.'TP CONNECT SID ' returns ORA-03114 error.

    Hi All,
    Last week we were applying an Add-On SAPK-510AGINAIN. It was running in
    phase IMPORT_PROPER for more than 10 hours without any update in logs.
    So I went into SM50 cancelled the work processess. From then when I continue the Add-on installation, I get an error 'TP_CANNOT_CONNECT_TO_SYSTEM' and tp return code 230. When I see
    the SLOG, it says R3trans cannot create a process. When I tried
    doing 'tp connect PI7 pf=<profile name>, I get a error 'ORA-03114- NOt
    connected to ORACLE' and also some SQL Query with ddntt table and few entries.
    I also did a DBCHECK, the ABAP Dictionary is consistent with the
    Database.Also I suspect the nametab entries should have been
    inconsistent state when I killed the work process manually..
    Regards
    Thilip Kumar

    Hi Juan,
    Oracle did not go down during SP application.. R3trans -d works fine and also the Transport tool tp check also is fine.. I have even upgraded the kernel to the latest level. STMS is configured for Single system landscape and it is also very well fine..
    Please see the output of 'tp connect PIX pf="<TP_PROFILE_>"
    TRACE-INFO: 337:  [dev trc     ,00000]  SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
    TRACE-INFO: 338:                                                                                30  0.356722
    TRACE-INFO: 339:  [dev trc     ,00000]  NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
    TRACE-INFO: 340:                                                                                27  0.356749
    TRACE-INFO: 341:  [dev trc     ,00000]  AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20  0.356769
    TRACE-INFO: 342:  [dbntab      ,01003]  ***LOG BY4=>sql error 3114   performing SEL on table DDNTT      [dbntab#6 @ 10038]
    TRACE-INFO: 343:                                                                                38  0.356807
    TRACE-INFO: 344:  [dbntab      ,01003]  ***LOG BY0=>ORA-03114: not connected to ORACLE [dbntab#6 @ 10038]
    TRACE-INFO: 345:                                                                                31  0.356838
    TRACE-INFO: 346:  [dev trc     ,00000]  OCI-call failed with -1=OCI_ERROR                             299  0.357137
    TRACE-INFO: 347:  [dev trc     ,00000]     SQL error 3114: 'ORA-03114: not connected to ORACLE'        24  0.357161
    TRACE-INFO: 348:  [dbsloci.    ,00000]  *** ERROR => Error 3114 in stmt_fetch() from oci_execute_stmt(), orpc=1
    TRACE-INFO: 349:                                                                                35  0.357196
    TRACE-INFO: 350:  [dbsloci.    ,00000]  *** ERROR => ORA-3114 occurred when executing SQL stmt (parse error offset=0)
    TRACE-INFO: 351:                                                                                33  0.357229
    TRACE-INFO: 352:  [dev trc     ,00000]  sc_p=0x110cc4770,no=3,idc_p=0x110cdd560,con=0,act=1,slen=238,smax=256,#vars=1,stmt=0x110fe94e8,table=DDNTT                        
    TRACE-INFO: 353:                                                                                34  0.357263
    TRACE-INFO: 354:  [dev trc     ,00000]  SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
    TRACE-INFO: 355:                                                                                31  0.357294
    TRACE-INFO: 356:  [dev trc     ,00000]  NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
    TRACE-INFO: 357:                                                                                30  0.357324
    TRACE-INFO: 358:  [dev trc     ,00000]  AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20  0.357344
    TRACE-INFO: 359:  [dev trc     ,00000]  sc_p=0x110cc4770,no=3,idc_p=0x110cdd560,con=0,act=1,slen=238,smax=256,#vars=1,stmt=0x110fe94e8,table=DDNTT                        
    TRACE-INFO: 360:                                                                                98  0.357442
    TRACE-INFO: 361:  [dev trc     ,00000]  prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=(nil),ocistmth_p=0x110fe9ec0
    TRACE-INFO: 362:                                                                                33  0.357475
    TRACE-INFO: 363:  [dev trc     ,00000]  IN : cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=60,vmax=32,bound=1,iobuf_p=0x110fb1468,vda_p=0x110feb8c8
    TRACE-INFO: 364:                                                                                34  0.357509
    TRACE-INFO: 365:  [dev trc     ,00000]       lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
    TRACE-INFO: 366:                                                                                31  0.357540
    TRACE-INFO: 367:  [dev trc     ,00000]  OUT: cols=21,rmax=1,xcnt=1,rpc=1,rowi=0,rtot=1,upto=4294967295,rsize=218,vmax=32,bound=1,iobuf_p=0x110e0d4e8,vda_p=0x110fec028
    TRACE-INFO: 368:                                                                                34  0.357574
    TRACE-INFO: 369:  [dev trc     ,00000]       lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
    TRACE-INFO: 370:                                                                                31  0.357605
    TRACE-INFO: 371:  [dev trc     ,00000]  SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
    TRACE-INFO: 372:                                                                                30  0.357635
    TRACE-INFO: 373:  [dev trc     ,00000]  NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
    TRACE-INFO: 374:                                                                                31  0.357666
    TRACE-INFO: 375:  [dev trc     ,00000]  AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20  0.357686
    TRACE-INFO: 376:  [dbntab      ,01003]  ***LOG BY4=>sql error 3114   performing SEL on table DDNTT      [dbntab#6 @ 10038]
    TRACE-INFO: 377:                                                                                38  0.357724
    Also the are no dumps as well as system logs for the issue..
    Regards
    Thilip Kumar
    Edited by: Thilip Kumar on Dec 23, 2008 3:44 PM
    Edited by: Thilip Kumar on Dec 23, 2008 3:45 PM
    Edited by: Thilip Kumar on Dec 23, 2008 3:46 PM

  • Error al ejecutar SQL plus y error ORA-03114

    Instali Oracle 9i 9.2 cliente sobre windows 98 para conectarme a la base Oracle 7.3.4. La instalacisn fue exitosa y la configuracion del Net tambiin results exitosa, sin embargo, al ejecutar el sql plus me envma un error y hace referencia a product_user_profile, ademas, no puedo ejecutar mi aplicacisn en VB enviando el error ORA-03114: no conectado a ORACLE.
    ?Qui me falta por configurar?.
    Al instalar Oracle 8i no presenta ningun error, funcionando todo exitosamente.

    Babblefish believes that your question translates to English as:
    "I installed Oracle 9i 9,2 client on Windows 98 to connect me to the base Oracle 7.3.4. The installation was successful and the configuration of the Net also was successful, nevertheless, when executing the SQL extra sends an error to me and makes reference to product_user_profile, in addition, I cannot execute my application in VB sending the Ora-03114 error: not connected to ORACLE. What I need to form. When installing Oracle 8i does not present/display ningun successful error, working everything."
    Assuming that's a proper translation, there are a couple of points:
    - The 9.2 client ins't certified to connect to a 7.3.4 database. There may well be random issues with this configuration.
    - product_user_profile indicates to me that your DBA may have set something up that prevents certain users/machines/applications/etc. from logging into the database. I'd try speaking with your DBA to see whether this is the case, and what you need to do to have the system changed.
    Justin

  • WebAgent trouble with Linux (ORA-03114)

    sometimes ORA-03114 error occur , when we use webagent with apache 1.3.12.
    Only Linux platform (we tested NT and SunOS with same enviroment) , this error appeared.
    normaly it work well , but after long time (..10h) passed since last access, it says
    Oracle interMedia Web Agent
    An error occurred processing your MEDIAGET or MEDIAPUT request
    Error while trying to retrieve text for error ORA-03113
    therefore we can see that message every morning.I think connection timeout between WebAgentProcess to DB is matter.
    i want to make it keep connection. how ?
    please help
    thanks, advance.
    taro

    this trouble related to firewall settings.
    DB would connect to webagent for timeout process. firewall dropped these packets, so webagent connection was timeout.it was clearly resolved.
    very thanks

  • Ora-03114

    i got ora-03114 error while running the catproc.sql scripts,
    please help to sort this issue

    Hi,
    i got ora-03114 error while running the catproc.sql scripts,please help to sort this issuecan u post complete error message?
    Refer:
    Re: ORA-01092: ORACLE instance terminated. Disconnection forced
    http://www.dbasupport.com/forums/showthread.php?t=60089
    Hope helps :)
    Regards,
    X A H E E R

  • Install oracle10g at solaris 10 x86 platform ORA-07445 error occured

    I meet a problem when install oracle10g at solaris 10.when create database, the dbca display infomation:
    ora-03113 "end-of-file on communication channel"
    ora-03114 ORACLE not available
    Perhaps someone can give me some advices ?
    Its very urgent
    Thanks and Best Regards
    Dillon.xu
    OS: solaris10g
    # showrev
    Hostname: v40-1
    Hostid: 24ea10ed
    Release: 5.10
    Kernel architecture: i86pc
    Application architecture: i386
    Hardware provider:
    Domain: test.com
    Kernel version: SunOS 5.10 s10_74
    v40-1# prtconf |grep Mem
    Memory size: 2048 Megabytes
    database: oracle10g 10.1.0.3
    Oracle trace file info:
    export/home/oracle/product/10.0/rdbms/log/ora10g_ora_1759.trc
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /export/home/oracle/product/10.0
    System name: SunOS
    Node name: v40-1
    Release: 5.10
    Version: s10_74
    Machine: i86pc
    Instance name: ora10g
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    1759
    kstwlb: SGA is no longer mapped
    Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
    59fffff4
    *** 2005-02-22 14:20:07.861
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to obj
    ect] [1509949428] [] [] []
    Current SQL information unavailable - no session.
    ----- Call Stack Trace -----
    calling call entry argument values in hex
    location type point (? means dubious value)

    10g on Solaris 10 isn't yet supported. It is announced for March 2005.

  • Manage Data Targets - ORA 03114 SQL Error

    Can someone help with this one.....
    We have recently patched up to 24 in our BW Dev and all was well.
    When I now go into cube...manage and contents. I simply want to select a few characteristics and view the data. When I choose a particular characteristic (0profit_ctr) and ask it to display, I get the following error message..
    Runtime errors         DBIF_REPO_SQL_ERROR                                                                 
    Database error text........: "ORA-03114: not connected to ORACLE" Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
    The current status of the ORACLE instance cannot be determined. It may still be inactive or the database administrator may have restarted it . In any case, all systems that have accessed the ORACLE instance 
    must be restarted after the ORACLE instance has been restarted. 
    "DBIF_REPO_SQL_ERROR" C    
    "SAPLRSDRS" or "LRSDRSF04" 
    "FETCH_DATA_OPENSQL"       
    It seems to be pointing to the following line of code in LRSDRSF04...
    DESCRIBE TABLE <l_t_data> LINES l_count.
    which is part of this statement..
      If less than 'i_pkgsize' many tuples are read
      => end-of-data is reached
        DESCRIBE TABLE <l_t_data> LINES l_count.
        IF l_count <> i_pkgsize.
          e_eof = rs_c_true.
        ENDIF.
      ENDIF.
    I can select other characteristics and they display OK. Reports seem to work OK. 0Profit_Ctr is active. Have emptied the cube and reloaded data. Still get the problem.
    Just to confuse the issue, if I select 0Profit_ctr and 0priority together, it works (0priority is a nav attribute of 0profit_ctr)
    But if I select 0project (project definition) which is also a nav attribute - it fails !
    There does not seem to be any clear pattern. Some other cubes that have 0Profit_ctr have the same issue, whilst others do not !
    Our Basis team have had a look and say its a 'data' problem, we will have to re-build the cubes !
    Any thoughts would be appreciated.
    Pete

    Hi
    We had the same problem. As you probably know you can define different updaterules for characteristics for separate keyfigures. For instance: for the first keyfigure get the controlling area from characteristic 0CO_AREA in the ODS and for the second keyfigure get the controlling are by a constant value 'KAD'. In our case we could solve the problem by using the same updaterules for each keyfigure and reloading the data in the cube. So maybe you can have a look at that.
    Best Regards
    Hans Fokker

  • SQLPlus COPY error: ORA-03114: not connected to ORACLE

    This is what I'm trying to do:
    I'm logged into an Oracle 8.1.6 database on a Windows 2000 Professional box and trying to copy data and tables from an Oracle 7.3.4 database on an HP/UX box.
    I log into my 8.1.6 SQLPlus as:
    scott/tiger@testdb
    Then I run the following:
    SQL> set copycommit 1
    SQL> set arraysize 1000
    SQL> copy from user/user1@devp1 -
    create reps_t -
    using -
    select * from reps_tThis is my error:
    ORA-03114: not connected to ORACLE
    Can someone give me a better understand how SQLPlus COPY works and give me an idea how to locate the problems.
    Thanks,
    Laith E.H.
    null

    I think this combination user/user1@devp1
    is not ok.
    U can get good material about copy command
    from technet itself. Just search for Copy

  • Standby Database gives error ORA-03113:ORA-03114

    Hi
    I am using oracle 9iR2 on standby database when i recover it return errors like
    SQL> recover standby database;
    ORA-00279: change 8209765386 generated at 07/18/2008 12:10:41 needed for thread
    1
    ORA-00289: suggestion : J:\ORACLE\ORADATA\APR1\ARCHIVE\APR1T001S86548.ARC
    ORA-00280: change 8209765386 for thread 1 is in sequence #86548
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    auto
    ORA-00279: change 8209782309 generated at 07/18/2008 12:22:05 needed for thread
    1
    ORA-00289: suggestion : J:\ORACLE\ORADATA\APR1\ARCHIVE\APR1T001S86549.ARC
    ORA-00280: change 8209782309 for thread 1 is in sequence #86549
    ORA-00278: log file 'J:\ORACLE\ORADATA\APR1\ARCHIVE\APR1T001S86548.ARC' no
    longer needed for this recovery
    ORA-03113: end-of-file on communication channel
    ORA-03114: not connected to ORACLE
    Alert log display
    Starting datafile 1 recovery in thread 1 sequence 86551
    Datafile 1: 'E:\ORANT\ORADATA\APR1\SYSTEM01.DBF'
    Starting datafile 3 recovery in thread 1 sequence 86551
    Datafile 3: 'E:\ORANT\ORADATA\APR1\CWMLITE01.DBF'
    Starting datafile 4 recovery in thread 1 sequence 86551
    Datafile 4: 'E:\ORANT\ORADATA\APR1\DRSYS01.DBF'
    Starting datafile 5 recovery in thread 1 sequence 86551
    Datafile 5: 'E:\ORANT\ORADATA\APR1\EXAMPLE01.DBF'
    Starting datafile 6 recovery in thread 1 sequence 86551
    Datafile 6: 'E:\ORANT\ORADATA\APR1\INDX01.DBF'
    Starting datafile 7 recovery in thread 1 sequence 86551
    Datafile 7: 'E:\ORANT\ORADATA\APR1\ODM01.DBF'
    Starting datafile 8 recovery in thread 1 sequence 86551
    Datafile 8: 'E:\ORANT\ORADATA\APR1\TOOLS01.DBF'
    Starting datafile 9 recovery in thread 1 sequence 86551
    Datafile 9: 'J:\ORACLE\ORADATA\APR1\USERS01.DBF'
    Starting datafile 10 recovery in thread 1 sequence 86551
    Datafile 10: 'E:\ORANT\ORADATA\APR1\XDB01.DBF'
    Starting datafile 11 recovery in thread 1 sequence 86551
    Datafile 11: 'J:\ORACLE\ORADATA\APR1\APR_DATA5_E.DBF'
    Starting datafile 12 recovery in thread 1 sequence 86549
    Datafile 12: 'J:\ORACLE\ORADATA\APR1\APR_DATA4_C.DBF'
    Starting datafile 13 recovery in thread 1 sequence 86550
    Datafile 13: 'J:\ORACLE\ORADATA\APR1\APR_DATA2_D.DBF'
    Starting datafile 14 recovery in thread 1 sequence 86550
    Datafile 14: 'J:\ORACLE\ORADATA\APR1\APR_DATA2_A.DBF'
    Starting datafile 15 recovery in thread 1 sequence 86548
    Datafile 15: 'J:\ORACLE\ORADATA\APR1\APR_DATA2_B.DBF'
    Starting datafile 16 recovery in thread 1 sequence 86550
    Datafile 16: 'J:\ORACLE\ORADATA\APR1\APR_DATA1_A.DBF'
    Starting datafile 17 recovery in thread 1 sequence 86550
    Datafile 17: 'J:\ORACLE\ORADATA\APR1\APR_DATA1_B.DBF'
    Starting datafile 18 recovery in thread 1 sequence 86550
    Datafile 18: 'J:\ORACLE\ORADATA\APR1\APR_INDX1_A.DBF'
    Starting datafile 19 recovery in thread 1 sequence 86549
    Datafile 19: 'J:\ORACLE\ORADATA\APR1\APR_INDX1_B.DBF'
    Starting datafile 20 recovery in thread 1 sequence 86549
    Datafile 20: 'J:\ORACLE\ORADATA\APR1\APR_INDX1_C.DBF'
    Starting datafile 25 recovery in thread 1 sequence 86550
    Datafile 25: 'J:\ORACLE\ORADATA\APR1\APR_INDX3_A.DBF'
    Starting datafile 26 recovery in thread 1 sequence 86550
    Datafile 26: 'J:\ORACLE\ORADATA\APR1\APR_INDX3_B.DBF'
    Starting datafile 27 recovery in thread 1 sequence 86550
    Datafile 27: 'J:\ORACLE\ORADATA\APR1\APR_INDX3_C.DBF'
    Starting datafile 28 recovery in thread 1 sequence 86550
    Datafile 28: 'J:\ORACLE\ORADATA\APR1\APR_MVIEWS_A.DBF'
    Starting datafile 29 recovery in thread 1 sequence 86550
    Datafile 29: 'J:\ORACLE\ORADATA\APR1\BLOB_A.DBF'
    Starting datafile 30 recovery in thread 1 sequence 86549
    Datafile 30: 'J:\ORACLE\ORADATA\APR1\HR_DATA1_A.DBF'
    Starting datafile 31 recovery in thread 1 sequence 86548
    Datafile 31: 'J:\ORACLE\ORADATA\APR1\HR_DATA2_A.DBF'
    Starting datafile 32 recovery in thread 1 sequence 86550
    Datafile 32: 'J:\ORACLE\ORADATA\APR1\HR_INDX1_A.DBF'
    Starting datafile 33 recovery in thread 1 sequence 86550
    Datafile 33: 'J:\ORACLE\ORADATA\APR1\HR_INDX2_A.DBF'
    Starting datafile 34 recovery in thread 1 sequence 86548
    Datafile 34: 'J:\ORACLE\ORADATA\APR1\INVENTORY_A.DBF'
    Starting datafile 35 recovery in thread 1 sequence 86550
    Datafile 35: 'J:\ORACLE\ORADATA\APR1\INVENTORY_INDX_A.DBF'
    Starting datafile 36 recovery in thread 1 sequence 86550
    Datafile 36: 'E:\ORANT\ORADATA\APR1\SAMPLE_DATA1_A.DBF'
    Starting datafile 37 recovery in thread 1 sequence 86550
    Datafile 37: 'J:\ORACLE\ORADATA\APR1\VMS_DATA1_A.DBF'
    Starting datafile 38 recovery in thread 1 sequence 86550
    Datafile 38: 'J:\ORACLE\ORADATA\APR1\APR_MMS_A.DBF'
    Starting datafile 39 recovery in thread 1 sequence 86550
    Datafile 39: 'J:\ORACLE\ORADATA\APR1\AUDIT_DATA_A.DBF'
    Starting datafile 40 recovery in thread 1 sequence 86549
    Datafile 40: 'J:\ORACLE\ORADATA\APR1\UNDOTBS.DBF'
    Starting datafile 41 recovery in thread 1 sequence 86550
    Datafile 41: 'J:\ORACLE\ORADATA\APR1\APR_DATA1_C.DBF'
    Starting datafile 42 recovery in thread 1 sequence 86549
    Datafile 42: 'J:\ORACLE\ORADATA\APR1\APR_INDX3_E.DBF'
    Starting datafile 43 recovery in thread 1 sequence 86548
    Datafile 43: 'J:\ORACLE\ORADATA\APR1\APR_DATA2_C.DBF'
    Starting datafile 44 recovery in thread 1 sequence 86550
    Datafile 44: 'J:\ORACLE\ORADATA\APR1\APR_INDX1_E.DBF'
    Starting datafile 46 recovery in thread 1 sequence 86550
    Datafile 46: 'E:\ORANT\ORADATA\APR1\SYSTEM02.DBF'
    Starting datafile 47 recovery in thread 1 sequence 86550
    Datafile 47: 'J:\ORACLE\ORADATA\APR1\APR_INDX4_A.DBF'
    Starting datafile 48 recovery in thread 1 sequence 86549
    Datafile 48: 'J:\ORACLE\ORADATA\APR1\APR_DATA4.DBF'
    Starting datafile 49 recovery in thread 1 sequence 86550
    Datafile 49: 'J:\ORACLE\ORADATA\APR1\APR_DATA4_A.DBF'
    Starting datafile 50 recovery in thread 1 sequence 86548
    Datafile 50: 'J:\ORACLE\ORADATA\APR1\APR_DATA4_B.DBF'
    Starting datafile 51 recovery in thread 1 sequence 86550
    Datafile 51: 'J:\ORACLE\ORADATA\APR1\APR_INDX4_B.DBF'
    Starting datafile 52 recovery in thread 1 sequence 86550
    Datafile 52: 'J:\ORACLE\ORADATA\APR1\APR_DATA5_A.DBF'
    Starting datafile 53 recovery in thread 1 sequence 86550
    Datafile 53: 'J:\ORACLE\ORADATA\APR1\APR_DATA5_B.DBF'
    Starting datafile 54 recovery in thread 1 sequence 86550
    Datafile 54: 'J:\ORACLE\ORADATA\APR1\APR_DATA5_C.DBF'
    Starting datafile 55 recovery in thread 1 sequence 86550
    Datafile 55: 'J:\ORACLE\ORADATA\APR1\APR_DATA5_D.DBF'
    Starting datafile 56 recovery in thread 1 sequence 86549
    Datafile 56: 'J:\ORACLE\ORADATA\APR1\APR_INDX4_C.DBF'
    Starting datafile 57 recovery in thread 1 sequence 86550
    Datafile 57: 'J:\ORACLE\ORADATA\APR1\APR_INDX3_F.DBF'
    Starting datafile 58 recovery in thread 1 sequence 86550
    Datafile 58: 'J:\ORACLE\ORADATA\APR1\APR_DATA6_A.DBF'
    Starting datafile 59 recovery in thread 1 sequence 86548
    Datafile 59: 'J:\ORACLE\ORADATA\APR1\APR_DATA6_B.DBF'
    Starting datafile 60 recovery in thread 1 sequence 86549
    Datafile 60: 'J:\ORACLE\ORADATA\APR1\APR_DATA6_C.DBF'
    Starting datafile 61 recovery in thread 1 sequence 86549
    Datafile 61: 'J:\ORACLE\ORADATA\APR1\APR_INDX4_D.DBF'
    Starting datafile 62 recovery in thread 1 sequence 86550
    Datafile 62: 'J:\ORACLE\ORADATA\APR1\APR_INDX5_A.DBF'
    Starting datafile 63 recovery in thread 1 sequence 86550
    Datafile 63: 'J:\ORACLE\ORADATA\APR1\APR_INDX5_B.DBF'
    Starting datafile 64 recovery in thread 1 sequence 86550
    Datafile 64: 'E:\ORANT\ORADATA\APR1\USERS01_A.DBF'
    Starting datafile 65 recovery in thread 1 sequence 86550
    Datafile 65: 'J:\ORACLE\ORADATA\APR1\GMT1_DATA.DBF'
    Starting datafile 66 recovery in thread 1 sequence 86548
    Datafile 66: 'J:\ORACLE\ORADATA\APR1\GMT1_INDX.DBF'
    Starting datafile 67 recovery in thread 1 sequence 86550
    Datafile 67: 'J:\ORACLE\ORADATA\APR1\APR_DATA7.DBF'
    Starting datafile 68 recovery in thread 1 sequence 86550
    Datafile 68: 'J:\ORACLE\ORADATA\APR1\APR_INDX7A.ORA'
    Starting datafile 69 recovery in thread 1 sequence 86550
    Datafile 69: 'J:\ORACLE\ORADATA\APR1\APR_INDX8_A.DBF'
    Starting datafile 70 recovery in thread 1 sequence 86550
    Datafile 70: 'J:\ORACLE\ORADATA\APR1\APR_INDX8_B.DBF'
    Media Recovery Log
    ORA-279 signalled during: ALTER DATABASE RECOVER standby database ...
    Wed Jul 23 11:26:24 2008
    ALTER DATABASE RECOVER CONTINUE DEFAULT
    Wed Jul 23 11:26:24 2008
    Media Recovery Log J:\ORACLE\ORADATA\APR1\ARCHIVE\APR1T001S86548.ARC
    ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
    Wed Jul 23 11:26:25 2008
    ALTER DATABASE RECOVER CONTINUE DEFAULT
    Media Recovery Log J:\ORACLE\ORADATA\APR1\ARCHIVE\APR1T001S86549.ARC
    Wed Jul 23 11:26:53 2008
    Some recovered datafiles maybe left media fuzzy
    Media recovery may continue but open resetlogs may fail
    Wed Jul 23 11:26:53 2008
    ARC0: terminating instance due to error 472
    Instance terminated by ARC0, pid = 2100
    Tell me the solution.
    Thanks in advance

    I think your database is not going in begin backup mode...
    this is my standby database server Pratap is there any method to check backup mode .
    Thanks

  • Error: ORA-03114: not connected to ORACLE

    While executing the database creation at the middle it is asking for password even if i give password (first attempt ) or empty enter (Last attempt)i'm unable to connect the database.
    Password for DBSNMP user:
    null [ORA-03114: not connected to ORACLE
    Thanks!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    in my lsnrctl i am unable to see the database
    H:\lsnrctl status
    LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:10:31
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
    Start Date                01-FEB-2013 19:01:09
    Uptime                    0 days 0 hr. 9 min. 22 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\oracle\listener.ora
    Listener Log File         e:\app\username\diag\tnslsnr\mysystem\listener\alert\log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
    Services Summary...
    Service "orcl" has 1 instance(s).
      Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    Service "First" has 1 instance(s).
      Instance "First", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfullyi am able to see the all the database which running under this instances
    After that i pingged the database
    H:\>tnsping First
    TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:13:47
    Copyright (c) 1997, 2010, Oracle.  All rights reserved.
    Used parameter files:
    C:\Oracle\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost
    )(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = FIRST)))
    OK (30 msec)where as in tnsping Last i am able to see the database
    H:\>tnsping Last
    TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:13:47
    Copyright (c) 1997, 2010, Oracle.  All rights reserved.
    Used parameter files:
    C:\Oracle\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost
    )(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = LAST)))
    OK (30 msec)Last database is in oracleserviceLast
    What is wrong with the process.

  • Oracle 10G installation problem, and errors on SOLARIS 10 x86

    HI.
    I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
    When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
    When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
    Could anybody tell me how to solve these problems, please?
    Thank you :)

    Two options:
    1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
    2. Create database manually (without DBCA)

  • ORA-1555  ORA-3136 errors:: elapsed time vs Query Duration

    Dear all,
    - My Database version is 11.2.0.2, Solaris.
    - We have been having a problem in the production database where the front end nodes start going up and down for couple of hours sometimes. ; When node flapping is going on we get connection timed out alerts.
    WARNING: inbound connection timed out (ORA-3136) opiodr aborting
    process unknown ospid (4342) as a result of ORA-609 opiodr aborting
    process unknown ospid (4532) as a result of ORA-609 opiodr aborting
    process unknown ospid (4534) as a result of ORA-609 opiodr aborting....
    Since this week node flapping is happening every day. Since past 2 days after or during node flapping we are getting ORA-1555 error.
    Extract from alert log error:
    ORA-01555 caused by SQL statement below (SQL ID: g8804k5pkmtyt, Query Duration=19443 sec, SCN: 0x0001.07bd90ed):
    SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.parentDeviceId, d.created, d.lastModified AS devLastMod, d.customerId, d.userKey1, d.userKey2, d.userKey4, d
    .userKey5, d.firmwareFamily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.userKey6, d.provisioningId, d.status, d.classification, d.population, d.name, d.ipRe
    solver, d.ipExpirationTime, d.geoLocationId,contact.firstContactTime, ifaces.id, ifaces.type AS ifaceType, ifaces.lastModified AS ifaceLastMod, ifaces.timeoutname, ifac
    es.username1, ifaces.password1, ifaces.username2, ifaces.password2, ifaces.connReqUrl, ifaces.connReqScheme, ifaces.srvNonce, ifaces.deviceNonce, ifaces.phoneNumber,ifa
    ces.bootstrapSecMethod, ifaces.srvAuthentication, ifaces.deviceAuthentication, ifaces.userPIN, ifaces.networkID, ifaces.omaSessionID, ifaces.portNum, ifaces.mgtIp, ifac
    es.cmtsIp, ifaces.mgtReadCommunity, ifaces.mgtWriteCommunity, ifaces.cmtsReadCommunity, ifaces.cmtsWriteCommunity, devto.name AS devtoName, devto.rebootTimeout, devto.sessionInitiationI run Statspack report from the whole day duration, and looking into the elapsed time in seconds no more than 3739.61 sec (too lower than run duration in the alert log file of 19443 sec); So I would like to know if there is any co-relations between the ORA-3136 errors and the ORA-1555 errors?
       CPU                  CPU per             Elapsd                     Old
      Time (s)   Executions  Exec (s)  %Total   Time (s)    Buffer Gets  Hash Value
    tTime <= :3 ) AND (endTime IS NULL OR endTime >= :4 )
       2773.77    7,787,914       0.00    3.4    3739.61     112,671,645 1909376826
    Module: JDBC Thin Client
    SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
    ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
    d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
    ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
    SQL> show parameter UNDO_MANAGEMENT
    NAME                                 TYPE        VALUE
    undo_management                      string      AUTO
    SQL> show parameter UNDO_RETENTION
    NAME                                 TYPE        VALUE
    undo_retention                       integer     10800BR,
    Diego

    Thank you. Please let me know if it is enough or you need more information;
    SQL ordered by Gets  DB/Inst: DB01/db01  Snaps: 14835-14846
    -> End Buffer Gets Threshold:    100000 Total Buffer Gets:     677,689,568
    -> Captured SQL accounts for   73.6% of Total Buffer Gets
    -> SQL reported below exceeded  1.0% of Total Buffer Gets
                                                         CPU      Elapsd     Old
      Buffer Gets    Executions  Gets per Exec  %Total Time (s)  Time (s) Hash Value
         21,286,248    2,632,793            8.1    3.4   666.73    666.76 3610154549
    Module: JDBC Thin Client
    SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
    ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
    d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
    ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
         17,029,561    1,176,849           14.5    2.7   417.32    416.73 1909376826
    Module: JDBC Thin Client
    SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
    ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
    d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
    ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
         17,006,795           37      459,643.1    2.7   367.61    368.95 4045552861
    Module: JDBC Thin Client
    SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
    ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
    d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
    ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.userAnother Statspack report for the whole day shows;
    SQL ordered by CPU  DB/Inst: DB01/db01  Snaps: 14822-14847
    -> Total DB CPU (s):          82,134
    -> Captured SQL accounts for   40.9% of Total DB CPU
    -> SQL reported below exceeded  1.0% of Total DB CPU
        CPU                  CPU per             Elapsd                     Old
      Time (s)   Executions  Exec (s)  %Total   Time (s)    Buffer Gets  Hash Value
    tTime <= :3 ) AND (endTime IS NULL OR endTime >= :4 )
       2773.77    7,787,914       0.00    3.4    3739.61     112,671,645 1909376826
    Module: JDBC Thin Client
    SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
    ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
    d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
    ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
    SQL ordered by Gets  DB/Inst: DB01/db01  Snaps: 14822-14847
    -> End Buffer Gets Threshold:    100000 Total Buffer Gets:   1,416,456,340
    -> Captured SQL accounts for   55.8% of Total Buffer Gets
    -> SQL reported below exceeded  1.0% of Total Buffer Gets
                                                         CPU      Elapsd     Old
      Buffer Gets    Executions  Gets per Exec  %Total Time (s)  Time (s) Hash Value
         86,354,963    7,834,326           11.0    6.3  2557.34   2604.08  906944860
    Module: JDBC Thin Client
    SELECT d.devId, d.vendor, d.model, d.productClass, d.oui, d.pare
    ntDeviceId, d.created, d.lastModified AS devLastMod, d.customerI
    d, d.userKey1, d.userKey2, d.userKey4, d.userKey5, d.firmwareFam
    ily, d.softwareVer, d.serialNum, d.ip, d.mac, d.userKey3, d.user
    .....BR,
    Diego
    Edited by: 899660 on 27-ene-2012 7:43
    Edited by: 899660 on 27-ene-2012 7:45

  • ORA-00604: error occurred at recursive SQL level 1 + ORA-04031

    Hi,
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for Solaris: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    os version : SunOS oratest 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V210
    SQL> show parameter  sga_target
    NAME                                 TYPE        VALUE
    sga_target                           big integer 892M
    SQL> show parameter shared_pool_size
    NAME                                 TYPE        VALUE
    shared_pool_size                     big integer 112M
    when i do normal query i am getting ora-04031 error and 10g server is Automatic Shared Memory Management since i set sga_target and server as to do automatically readjusts the sizes of memory pools, if that is the case why it throwing ora-04031 error;
    below errors showing before bounce the database
    SQL> show parameter size
    ORA-04031: unable to allocate 3840 bytes of shared memory ("shared
    pool","unknown object","sga heap(1,0)","kglsim object batch")
    SQL> select * from tab
      2  ;
    select * from tab
    ERROR at line 1:
    ORA-04031: unable to allocate 3840 bytes of shared memory ("shared
    pool","select * from tab
    ","sga heap(1,0)","kglsim object batch")
    alert log file:
    Errors in file /oracle/admin/appsdb/bdump/appsdb_smon_19154.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 3840 bytes of shared memory ("shared pool","unknown object","sga heap(1,0)","kglsim object batc
    h")
    Thanks
    PrakashEdited by: prakashdba on Jan 10, 2009 12:31 AM
    Edited by: prakashdba on Jan 10, 2009 4:10 AM

    And your version number is?
    And your patch level is?
    And your hardware and operating system are?
    What did you find when you looked this up at metalink?
    Did you follow the advice in the metalink Knowledge Base docs?

Maybe you are looking for

  • How to remove an unsollicited advertisment that cannot be removed by usual steps.

    This afternoon, an ad for skin care products appeared on my screen while I was getting ready to schedule an airline reservation. I tried to delete it by clicking the red circle, by pressing the delete key, by closing the folder, by turning off Firefo

  • I want to initialize  objects in action before showing a page.

    which method I should override when I want to display a page in adf 10.1.2? I am working with adf 10.1.2 including struts and UIX. the execute method can not be override,which method should I override? I want to change the where clause of a view obje

  • Loading variable into URL

    I have a php file that holds a certain variable (the name of an image). Then I have a SWF that shows the location of the file and then shows the actual picture itself. Here is a snippet from the PHP file: quote: print("&location=$image"); Below is my

  • Extend Enterprise Search for Supplier with business group attribute.

    Dear SAP MDG Experts, I have the same issue. I have to add BP grouping field to the Enterprise Search as search criteria for Supplier and Customer in MDG Could you please help me. Thanks Sachin Kapoor

  • Error in a package

    <p style="margin-top: 0; margin-bottom: 0"><font face="Tahoma" size="2">Hi,</font></p> <p style="margin-top: 0; margin-bottom: 0"> </p> <p style="margin-top: 0; margin-bottom: 0"><font face="Tahoma" size="2">I created the trigger :</font></p> <font S