Ora-03114 error when using trigger on spatial field

I have a table the has a lat and long field and an geometry field. I want to place a trigger so that as the users insert lat and long into the table it also populates those values into the geometry field. I built a trigger that is supposed to do this. Upon insert I get an ora-03114 error. I can run the same piece of pl/sql as a plain update statement. How do I solve this problem.
the DB is 9.0.1.2 and is stuck thier because of some 3rd party tools.
Aaron

Hi,
ORA-03114: not connected to ORACLE
Cause: A call to Oracle was attempted when no connection was established. Usually this happens because a user-written program has not logged on. It may happen if communication trouble causes a disconnection. In addition, this message could occur when ALTER SYSTEM KILL SESSION or ALTER SYSTEM DISCONNECT SESSION were issued with the IMMEDIATE qualifier because, in those cases, the client's connection to the database is terminated without waiting for the client to issue a request.
Check your client connection settings, your driver etc.
regards, Andreas

Similar Messages

ORA 00600 Error when using Mapviewer addJDBCTheme

Hello
I am receiveing the 600 error via my OC4J window when using mapviewers addJDBCTheme with the passTthrough boolean set to false (the query is rewitten by mapviewer to limit it to the results to the map view). If I perfrom the same query with passThrough set to true, no problems. I have a feeling this may relate to the index on my table. OC4J output for error below.
Any ideas appriciated.
Chris
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.lbs.mapserver.oms] request.getRemoteUser = null
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.lbs.mapserver.oms] request= <?xml version="1.0" standalone="yes"?>
<map_request
datasource="atrium2"
srid="81989"
width="500"
height="500"
bgcolor="#ffffff"
antialiase="true"
format="PNG_URL">
<center size="800.0">
<geoFeature>
<geometricProperty typeName="center">
<Point>
<coordinates>278872.6,187144.0</coordinates>
</Point>
</geometricProperty>
</geoFeature>
</center>
<themes>
<theme name="BUIDLING" user_clickable="false" />
<theme name="BLOCKS" user_clickable="false">
<jdbc_query
label_column="mbl_title"
spatial_column="spat_data"
label_style="TEXTBLACK"
render_style="TEST3"
jdbc_srid="81989"
datasource="atrium2"
asis="false">select spat_data, mbl_bka_id, mbl_title from WPE_SPATIAL_BLOCKS_VIEW_10G c
</jdbc_query>
</theme>
</themes>
</map_request>
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.sdovis.JSDOGeometry] exception while getting srid from a geometry node: For input string: ""
Tue Aug 09 10:58:38 BST 2005 DEBUG [oracle.lbs.mapserver.core.MapperPool] getMapper(atrium2) begins...
Tue Aug 09 10:58:38 BST 2005 DEBUG [oracle.lbs.mapserver.core.MapperPool] getMapper() succeeded.
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.sdovis.SRS] got srs object for :81989
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.lbs.mapserver.core.RealWorker] adding additional themes...
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.lbs.mapserver.core.RealWorker] adding a predefined theme BUIDLING
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.sdovis.DBMapMaker] adding predefined theme [name=BUIDLING]
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.lbs.mapserver.core.RealWorker] adding a JDBC Theme:
ThemeDescriptor=
name=BLOCKS
type=2
minScale=Infinity
maxScale=-Infinity
srid=81989
host=null
sid=null
port=null
user=null
mode=null
query=select spat_data, mbl_bka_id, mbl_title from WPE_SPATIAL_BLOCKS_VIEW_10G c
spatialColumn=spat_data
renderStyleName=TEST3
labelColumn=mbl_title
labelStyleName=TEXTBLACK
renderStyleDef=null
labelStyleDef=null
localThem=null
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.sdovis.SRS] *** isGeodetic=false, unit=METER
Tue Aug 09 10:58:38 BST 2005 DEBUG [oracle.sdovis.DBMapMaker] LoadThemeData running thread: Thread-67
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.sdovis.theme.pgtp] [ BUIDLING ]: 278472.6,186744.0,279272.6,187544.0
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.sdovis.theme.pgtp] [ BUIDLING ]: SELECT ROWID, GEOLOC, 'PRISM_ADM:BROWN_LINE', null, 'null', -1 FROM SPAT_BUILDING WHERE MDSYS.SDO_FILTER(GEOLOC, MDSYS.SDO_GEOMETRY(2003, 81989, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?, ?, ?, ?)), 'querytype=WINDOW') = 'TRUE'
Tue Aug 09 10:58:38 BST 2005 DEBUG [oracle.sdovis.DBMapMaker] LoadThemeData running thread: Thread-68
Tue Aug 09 10:58:38 BST 2005 DEBUG [oracle.sdovis.theme.DGTP] [Master scale] 153.60000000000002 [Theme scale factor] 1.0
Tue Aug 09 10:58:38 BST 2005 FINEST [oracle.sdovis.theme.DGTP] [DynGeomTheme] rewritten query: SELECT * FROM ( select spat_data, mbl_bka_id, mbl_title from WPE_SPATIAL_BLOCKS_VIEW_10G c ) WHERE MDSYS.SDO_FILTER(spat_data, MDSYS.SDO_GEOMETRY(2003, 81989, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(278472.6,186744.0,279272.6,187544.0)), 'querytype=WINDOW') = 'TRUE'
Tue Aug 09 10:58:38 BST 2005 DEBUG [oracle.sdovis.theme.pgtp] [ BUIDLING ] sql exec time: 15ms, total time loading 209 features: 125ms.
Tue Aug 09 10:58:53 BST 2005 WARN [oracle.sdovis.theme.DGTP] java.sql.SQLException: ORA-00600: internal error code, arguments: [kdsgrp1], [], [], [], [], [], [], []
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1478)
     at oracle.jdbc.ttc7.TTC7Protocol.fetch(TTC7Protocol.java:969)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2387)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2660)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:777)
     at oracle.sdovis.theme.DynGeomThemeProducer.prepareData(DynGeomThemeProducer.java:241)
     at oracle.sdovis.Theme.prepareData(Theme.java:174)
     at oracle.sdovis.DBMapMaker$LoadThemeData.run(DBMapMaker.java:1740)
Tue Aug 09 10:58:53 BST 2005 ERROR [oracle.sdovis.DBMapMaker] Message:null
Description: Nested exception is:
java.sql.SQLException: ORA-00600: internal error code, arguments: [kdsgrp1], [], [], [], [], [], [], []
java.sql.SQLException: ORA-00600: internal error code, arguments: [kdsgrp1], [], [], [], [], [], [], []
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1478)
     at oracle.jdbc.ttc7.TTC7Protocol.fetch(TTC7Protocol.java:969)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2387)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2660)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:777)
     at oracle.sdovis.theme.DynGeomThemeProducer.prepareData(DynGeomThemeProducer.java:241)
     at oracle.sdovis.Theme.prepareData(Theme.java:174)
     at oracle.sdovis.DBMapMaker$LoadThemeData.run(DBMapMaker.java:1740)
Tue Aug 09 10:58:53 BST 2005 INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 15250ms.
Tue Aug 09 10:58:53 BST 2005 FINEST [oracle.sdovis.RE] xfm: 0.625 0.0 0.0 -0.625 -174045.375 117215.0
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.sdovis.VectorRenderer] time to render theme BUIDLING with 209 styled features: 15ms
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.sdovis.VectorRenderer] time to render theme BLOCKS with 0 styled features: 0ms
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.sdovis.VectorRenderer] time to label theme BLOCKS with 0 styled features: 0ms
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.sdovis.VectorRenderer] time to label theme BUIDLING with 209 styled features: 0ms
Tue Aug 09 10:58:53 BST 2005 INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 15ms
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.lbs.mapserver.core.MapperPool] freeMapper() begins...
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.lbs.mapserver.core.RealWorker] [RealWorker] preparation time: 16ms
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.lbs.mapserver.core.RealWorker] [RealWorker] querying/rendering time: 15265ms
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.lbs.mapserver.core.RealWorker] [RealWorker] packing time: 31ms
Tue Aug 09 10:58:53 BST 2005 DEBUG [oracle.lbs.mapserver.core.RealWorker] [RealWorker] --------------- total time: 15312ms

Chris,
Can you run this rewritten query
SELECT * FROM ( select spat_data, mbl_bka_id, mbl_title from WPE_SPATIAL_BLOCKS_VIEW_10G c ) WHERE MDSYS.SDO_FILTER(spat_data, MDSYS.SDO_GEOMETRY(2003, 81989, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(278472.6,186744.0,279272.6,187544.0)), 'querytype=WINDOW') = 'TRUE'
in sql*plus without any errors?
The asumptions is there is a spatial index on spat_data and all the geometries are valid.
Also there will be a trace file on the db server. That'll give more details on what the likely cause is.
Jayant

ORA-306500 error when using EXEC_SQL? [SOLVED]

I used Francois Degrelle's example of doing a dynamic where clause to create a procedure using the EXEC_SQL package to get various counts from a table with different where clauses. Everything works for all the where clauses except when I try a date comparison I get the ORA-306500 error. The where clause I'm using takes 2 screen date fields:
'WHERE date_column BETWEEN ' || :date_field1 || ' AND ' || :date_field2
Anybody know what is causing this error?

you forgot the to_date in the dynamic part.
what you pass to sql engine now is
where date_column between 10-FEB-2008 and 11-FEB-2008
don't think this would work...
what you need is:
where date_column between to_date('10-FEB-2008', 'DD-MON-RRRR') and .....
so you have to do some type conversions:
first of all convert in your form your date variable to a string with known format:
=> to_char(:date_field, 'DD-MON-RRRR')
now you have a string which looks like this:
'10-FEB-2008'
then let's go over to the dynamic part:
you want to restrict your where clause on date values, so when restricting with specific strings (the string from above), you have to convert it to a date datatype with to date.
so, this would look like this (as mentioned in my last post):
'.....between to_date(''''||to_char(:date_field1, 'dd-mon-rrrr')||''', ''dd-mon-rrrr'') and ..... '
best thing would be to display your query, and pass it in sqlplus as long it won't work ;-).
regards

ORA-12514 Error when using Net Configuration Assistant

I have recently installed Oracle 11g on a Windows 2008 server and am now trying to connect via the Oracle client on my local machine.
Here is how I've been using Net Configuration Assistant so far:
Listener Configuration
The name of my listener is LISTENER_PROXIMA (proxima is the name of the server). Does this need to be named something else? Something specific?
I'm using TCP to connect.
I'm using standard port 1521.
Naming Methods
Local Naming and Easy Connect Naming
Local Net Service Name
Service name is ADMI04 (checked this against the lsnrstl service status on the server and it's correct)
Using TCP
Using the hostname proxima.domain-name.com
I'm attempting to connect as SYS (but have tried others with the same result)
When I go to test the connection I keep getting the ORA-12514 error. Does anyone know what I should do? Reinstall the listener? If so, are there any suggestions or guidance for that?
Thank you.

=================================
A couple of important points.
First, the listener is a server side only process. It's entire purpose in life is to receive requests for connections to databases and set up those connections. Once the connection is established, the listener is out of the picture. It creates the connection. It doesn't sustain the connection. One listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database. That would be like the telephone company building a separate switchboard for each customer.
Second, the tnsnames.ora file is a client side issue. It's purpose is for address resolution - the tns equivalent of the 'hosts' file further down the network stack. The only reason it exists on a host machine is because that machine can also run client processes.
Assume you have the following in your tnsnames.ora:
larry =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = curley)
)Now, when you issue a connect, say like this:
$> sqlplus scott/tiger@larrytns will look in your tnsnames.ora for an entry called 'larry'. Next, tns sends a request to (PORT = 1521) on (HOST = myhost) using (PROTOCOL = TCP), asking for a connection to (SERVICE_NAME = curley).
Where is (HOST = myhost) on the network? When the request gets passed from tns to the next layer in the network stack, the name 'myhost' will get resolved to an IP address, either via a local 'hosts' file, via DNS, or possibly other less used mechanisms. You can also hard-code the ip address (HOST = 123.456.789.101) in the tnsnames.ora.
Next, the request arrives at port 1521 on myhost. Hopefully, there is a listener on myhost configured to listen on port 1521, and that listener knows about SERVICE_NAME = curley. If so, you'll be connected.
What can go wrong?
First, there may not be an entry for 'larry' in your tnsnames. In that case you get "ORA-12154: TNS:could not resolve the connect identifier specified" No need to go looking for a problem on the host, with the listener, etc. If you can't place a telephone call because you don't know the number (can't find your telephone directory (tnsnames.ora) or can't find the party you are looking for listed in it (no entry for larry)) you don't look for problems at the telephone switchboard.
Maybe the entry for larry was found, but myhost couldn't be resolved to an IP address (say there was no entry for myhost in the local hosts file). This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe there was an entry for myserver in the local hosts file, but it specified a bad IP address. This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe the IP was good, but there is no listener running: "ORA-12541: TNS:no listener"
Maybe the IP was good, there is a listener at myhost, but it is listening on a different port. "ORA-12560: TNS:protocol adapter error"
Maybe the IP was good, there is a listener at myhost, it is listening on the specified port, but doesn't know about SERVICE_NAME = curley. "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor"
=====================================

Ora-31685 error when using impdp

Both the source and target database's version are 11g r1(11.1.0.6.0).The EXPDP finished well without error,But ORA-31685 error happened when IMPDP,error message as follow:
ORA-31685: Object type VIEW:"YDSJ"."MY_TAB_COLS" failed due to insufficient privileges. Failing sql is:
CREATE FORCE VIEW "YDSJ"."MY_TAB_COLS" ("COLUMN_NAME", "TABLE_NAME") AS select column_name,table_name from all_tab_cols
ORA-31685: Object type failed due to insufficient privileges. Failing sql is:
ORA-31685: Object type failed due to insufficient privileges. Failing sql is:
ORA-31685: Object type VIEW:"YDSJ"."YD_DAB121A_VIEW" failed due to insufficient privileges. Failing sql is:
CREATE FORCE VIEW "YDSJ"."YD_DAB121A_VIEW" ("LBDM", "LBMC", "XH", "ND", "ZHDYDM", "BJDYDM", "DYDM", "JJBZ") AS SELECT B."LBDM",B."LBMC",A."XH",A."ND",A."ZHDYDM",A."BJDYDM",A."DYDM",A."JJBZ" FROM YD_DAB121A A,YD_FLE9_VIEW B where JJBZ='0'
ORA-31685: Object type VIEW:"YDSJ"."YD_DAB121_VIEW" failed due to insufficient privileges. Failing sql is:
CREATE FORCE VIEW "YDSJ"."YD_DAB121_VIEW" ("LBDM", "LBMC", "YQTDM", "ZHDYDM", "DYDM", "ND", "DYBZ", "XZBZ", "SCBZ") AS SELECT B."LBDM",B."LBMC",A."YQTDM",A."ZHDYDM",A."DYDM",A."ND",A."DYBZ",A."XZBZ",A."SCBZ" FROM YD_DAB121 A,YD_FLE9_VIEW B
I can't find any information in oralce document.
Who can help me ?
Tel me why and how to resolve.

"insufficient privileges" means a grant is missing for the user your importing into. If this is a copy from one DB to another just compare the sorce user to the destination. Grants from the SYS schemas are not exported because SYS is not exported you will have to script these grants as needed.
For example grant sleect on v_$process to fred; whilst connected as "/ as sysdba".

ORA-03113 error when using Oracle 9i with Mapx 5.0

Hello,
I am using Personal Oracle 9i Release 2 with Mapx5.0 on Delphi.
Accessing the layers using tab files also as server layers..,
and commonly using the method of Mapx Layer.SearchAtPoint
Search is done on region, line as well as on point objects...,
at some point of time it flashes me the error
ORA-03113 end-of-file on communication channel
I am not exactly able to figure out when it gives..,
but i m getting it after some clicks on the layers
The same executable is working fine with Oracle 8.1.7
As anybody faced such a problem and knows the possible cause
Thanks,
Binoy

There is some java bug that is causing some problems if you are using 9.2.0.3. Here is some information:
Workaround for bug 2755842:
Event 10499 can be set (any non-zero level) to revert to the old behaviour.
==================================================
Setting the EVENT 10499
=======================
Check if the database server is using a server parameter (spfile) a parameter (init.ora) file.
From sqlplus, connect as sysdba and execute the command:
show parameters spfile
If the value is NULL or empty, then spfile is NOT enabled and init.ora is used.
1) If SPFILE is used:
SQL> show parameters spfile
NAME TYPE VALUE
spfile string
%ORACLE_HOME%\DATABASE\SPFILE%ORACLE_SID%.ORA
a) Using sqlplus logon as sysdba
b) Execute: alter system set event="10499 trace name context forever,level 4" scope=spfile
sid='*';
c) shutdown
d) startup the database
2) If INIT.ORA is used:
a) In the init<SID>.ora file, add the parameter event="10499 trace name context forever,level 4"
b) Stop and start the database
Hope this is it.
Dan

ORA-39070 Error when using datapump and writing to ASM storage

I am able to export data using datapump when i write to a file system. However, when i try to write to an ASM storage, i get the following errors.
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
below are the steps i tooks.
create or replace directory jp_dir2 as '+DATA/DEV01/exp_dir';
grant read,write on directory jp_dir2 to jpark;
expdp username/password schemas=testdirectory=jp_dir2 dumpfile=test.dmp log=test.log
Edited by: user564785 on Aug 25, 2011 6:49 AM

google: expdp ASM
first hit:
http://asanga-pradeep.blogspot.com/2010/08/expdp-and-impdp-with-asm.html
"Log files created during expdp cannot be stored inside ASM, for log files a directory object that uses OS file system location must be given. If not following error will be thrown
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
"

ORA-00600 Error when using DBCA

Hello,
I installed Oracle 9.2.0.1 on Linux Redhat 7.3. The installation says everything went fine. I attempted to create a database
by using the dbca just to make sure things were really working.
However,
I receive the following error:
ORA-00600 internal error code arguments
[1236], [][][][][]
From what I've read this could be some kind of general exception error, I don't know.
I've increased the shmmax size. Anybody have any ideas?
Thanks,
David

Hi,
its very difficult to tell you reason of the error without seeing trace file.actually this error comes because of several reason.
could you share the trace file?
Yogi
[email protected]

ORA-03113 Error when using loadjava

I am trying to create a Java Stored Procedure and when I attempt to load the resource file into Oracle using the loadjava utility, I receive the following message:
ORA-03113: end-of-file on communication channel
I receive this message consistently.
Any ideas?
null

There would be a trace file generated on the server where the database is installed, try to look in those trace files for additional messages and causes this might be happening, off hand I could also suggest increasing the processes init file parameter

Error when using LOV on date-field (qms0012F)

We are using QMS0012F.fmb (Headstart Template Package 6.5) to
launch all our reports. However, when a date-parameter is
defined as the last field in this form and when you select a
date using the LOV (windows-calendar), an error appears: 'FRM-
41051, you cannot create records here'. Therefore, when
possible, we defined the date-parameters as the first one in
row. In a couple of reports this is practically not possible,
simply because the date-field is the only one which has to be
filled. Is there a property to adjust or another solution to
solve this?
By the way: happy new year!

The Designer library ofgcall65 contains a package calendar, which contains a procedure close_calendar.
This procedure does a NEXT_ITEM (to implement an AUTO_SKIP) as its last action.
You will need to correct the problem with a customization to that library.
Regards,
Lauri

Sap upgrade-Error when using DP90-OK 530-field catalog not found

Hello,
We are upgrading from 4.6c to mySAP ERP 2004 version. In 4.6c, we are using VA90 to create a sales order from service order to bill the customer. However in mySAP ERP 2004 version, VA90 does not exist. So we created DP profile and are using transaction code DP90 to create billling request for the service order. However, System gives an error 'Field catalog not found'. The diagnosis says that -The field catalog cannot be determined because the output table structure name was not specified.
Please help us how to solve the above problem.
Thanks
Mala

hi mala,
did you see SAP-message 442170?
it is all about conversion VA90/DP90.
hope this helps.
br,
matthias
Message was edited by: Matthias Leitner

ORA-22813 error when deleting spatial objects in LIVE

Hi,
We are getting an ORA-22813 error when attempting to delete a spatial object from a version-enabled table in workspace LIVE. The spatial object to be removed has a SDO type of multipolygon. The geometry information consists of 4 rings with a combined ordinate count of 4120. The statement used to delete the row is:
delete from tableA where tableA.id in (select tableA.id from tableA where tableA.id = 3);
The error occurs only on a 10g R1 Oracle instance (10.1.0.5.0) with Workspace Manager version 10.1.0.7.1. The delete operation succeeds without problems on a 10g R2 (10.2.0.2.0) instance with Workspace Manager version 10.2.0.3.1. The statement is also executed successfully on the 10g R1 instance if the table is not version-enabled.
Any help on this would be appreciated.
Thanks

Hi,
I would recommend filing a TAR in this one. The only ora-22813 error involving workspace manager and geometry columns that I know about involves queries that need to sort data for which the size of the geometry column was >30k. Does the execution plan for the delete statement involve any kind of sort? However, this is an old 9.2 bug, that I believe was fixed for all 10.1 and newer releases.
Does the same error happen if you do not use the subquery?
Regards,
Ben

ORA-0907 error when querying XMLDB Table using XMLExists

Hi All,
Get ORA-00907 error when trying to use XMLExists:
SELECT *
FROM tnmab_agreement_xml_binary A
WHERE
( XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/ShippingPartyGroups/ShippingParties/CustomerHolder[SAP_ID="$ARG"]')
passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")
OR
( XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/NamedCustomerGroups/NamedCustomer/SAP_IDs/StringWrappers[Value="$ARG"]')
passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")
ORA-00907: missing right parenthesis
*00907. 00000 - "missing right parenthesis"*
**Cause:*
**Action:*
Error at Line: 6 Column: 176
Any help is appreciated
Thanks
Auro

XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/ShippingPartyGroups/ShippingParties/CustomerHolder[SAP_ID="$ARG"]'
passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")no ')' after the closing quote

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

ORA 03114 error

ORA 03114 error
weblogic
Forms 11g
db 11g
winserver 2008 64 bit

I am sorry I didn't explain my problem Clearly
My system developed with oracle forms 10g & oracle database 10g
Using oracle application server 10g with win server 2003 32 bit
And It was works properly
Now I upgrade my system to oracle database 11g and weblogic 11g
with win server2008 64 bit
and I tested it it is work no problems but som times when i run my application
if give me this error
frm-40735 unhandled exception ora-03114
and ask for the username and password for database when I give it is give the same error
if I close my Browser and wait sometimes and try agine it is work
why this error happen ………………………….??????
If anyone can help I would be grateful to him .
Thanks

Ora-03114 error when using trigger on spatial field

Similar Messages

Maybe you are looking for