ORA-03121 Error

To all:
Hi! Anybody who is familiar with this error? "[Intersolv][ODBC Oracle Driver][Oracle]Error while trying to retrieve text for for error ORA-03121". I am using Oracle version 7.3 and Intersolv 16-bit ODBS Driver.
If you have any idea about this particular error, please let me know. Thank you, and I would really appreciate your help.
Please write e-mail me at this address: [email protected]
null

Hey!
Go to this site and you will find the answer: http://support.merant.com/websupport/patches/2202.htm

Similar Messages

ORA-03121: No interface driver connect

Hi there,
can anybody solve my problem? i have installed Personal Oracle8 and then i installed Developer 2000 forms 4.5.
Now i am trying to connect with Oracle 8 from developer but it is showing ORA-03121 error.
when i check the error detail, it says Net8 driver not load in memory or there is mismatch of version.
one thing noticible that i have SQL*PLUS 8 and SQL*PLUS 3.2 both installed .
i want to be able to connect with database from Developer so that i can run form.
Any kind of help or advice from you professionals will be extremely helpful.
Regards
Abid Malik

To start the listener from command line issue lsnrctl start.
To configure SQLNET use the SQLNET easy config utility that came with the Forms installation.
More info:
http://www.orafaq.org/faqnet.htm

Ora-03121 connect to odbc datasource

I am running 8i 8.1.6 oracle, forms 6i, and am trying to connect to a AS400 DB2 database. I have the ODBC driver for the AS400 setup properly. When I try to connect in Forms 6i or SQL*Plus with the connect string odbc:datasource_name I get an error ORA-03121 error saying "No interface driver connected - function not performed". Any ideas? I have searched all over reguarding this error but none are specific to this. Net8 is up and running fine as well....
Thanks in advance,
Jeff

Thanks for the replies! I have used the ODBC test utility that comes with Oracle. It actually works and I am able to run ad hoc queries and such against this as400 datasource (this was prior to my posting). However if I try to connect to it in Forms using the odbc:data_source connect string, I get the ora-03121 error.
I don't think it ever gets to the point of checking the datasource name because I get the same error no matter what datasource name I use, even if I leave it blank.
Could I be using the wrong syntax? My AS400 datasource name is "rainier" and the connect string I use is "user/pword@odbc:rainier".
Thanks again for the replies!

Oracle Error ORA-03121

I installed Personal Oracle 8i, and Oracle Forms.
When I try to connect to a SQL*Server database using a DSN, I get the following:
ORA-03121 no interface driver connected - function not performed.
Do I need OCA installed?
Can I download this from somewhere (doesn't seem to be avialble from oracle.com)?
null

You most certainly can connect to a personel oracle database
using sqlnet. If fact you can connect to an oracle database
running on a win95 platform from another pc running on a
network. All you need to do is insure that the database listener
is running on the platform where the personel oracle is
installed.
James Aiken (guest) wrote:
: With Personal Oracle you can not use SQL*Net to connect to the
: database. You should have the Oracle_Sid set and do NOT
specify
: a DB alias when trying to connect.
: Steve (guest) wrote:
: : You need to install V2 of sqlnet. designer and developer
: : V2 and below will not do a direct connect to Oracle V8.
: : If you do not want to provide a db alias at login time
: : try entering the variable LOCAL in your registry. Set LOCAL
: : to your db alias.
: : Martin (guest) wrote:
: : : Hi...
: : : When I use Developer 2000 Form 4.5 to connect oracle
: : : database (PO8), I have an error ORA-03121: not driver
: connected
: : : function not perfomed.
: : : Anyone can help me to solve this error ???
: : : thanks ....
null

Error ORA-03121: not driver connected

Installed Oracle client 7.3.4 trying to connect to an Oracle 7.3.4 DB. I am getting error ORA-03121: not driver connected -
function not perfomed when I try and connect our client application. When I use SQL*Plus 3.3, I have no problems connecting, but when I try and connect through my client application, I get the error.
Any ideas?
Thanks
null

SQL*Plus 3.3 is for Oracle 7 while SQL*Plus 8.0 is for Oracle 8. So, 3.3 will load the Oracle 7 DLLs while 8.0 will load the 8i DLLs. Do you have Net8 installed and configured on the client?

Error ORA-03121

All...
I have an error when use Developer 2000, Form Designer 4.5 to
connect database oracle.
In the connect box I use userid : system ; password : manager ;
database : leave blank, then I click connect button but I have an
error : ORA-03121 : no interface driver connected - function not
perfomed.
Someone can help me ????
null

I assume that your database is V8. If so, developer V1&V2) and
designer (V1&V2) will only connect through V2 of sqlnet. You
need to have an entry in your tnsnames.ora file and have the
listener running. If you do not want to enter the alias portion
of the connect string then enter the registry variable LOCAL. Set
the LOCAL variable to the alias of your database entry in the
tnsnames.ora file.
Martin The (guest) wrote:
: All...
: I have an error when use Developer 2000, Form Designer 4.5 to
: connect database oracle.
: In the connect box I use userid : system ; password : manager ;
: database : leave blank, then I click connect button but I have
an
: error : ORA-03121 : no interface driver connected - function
not
: perfomed.
: Someone can help me ????
null

ORA-03121 when trying to connect to Access

Hello all,
maybe somebody can help: while trying to establish ODBC connection from Discoverer 3.1 to MS Access database I get an error:
"Failed to connect to Database ORA-03121: no
interface driver connected - function not performed "
I was using DNS created for Access and connect string like:
username/password@ODBC:DNSname
Regards,
Alex
[email protected]

Thanks for your reply.
But the funny thing on this compatibility issues is, that this configuration worked before. The only thing we did, was to setup the client-PC on a new hardware with also a new operating system (upgrading from Solaris 5.8 to 5.10). And from that time we encountered this problem.
Are there any OS-related problems known or better to say: is (was) ORACLE 7.1.3 supported on Solaris 5.10 ? Should we look for any patches which might help us ?

ORA-0312 Error

To all:
Hi! Anybody who is familiar with this error? "[Intersolv][ODBC Oracle Driver][Oracle]Error while trying to retrieve text for for error ORA-03121". I am using Oracle version 7.3 and Intersolv 16-bit ODBS Driver.
If you have any idea about this particular error, please let me know. Thank you, and I would really appreciate your help.
Please write e-mail me at this address: [email protected]
null

this is on eof the java forums.
please post odbc questions on the odbc forum

Ora - 03121

I have installed the ODBC software on an NT workstation. When I run the 'Oracle ODBC Test' application I can successfully make a connection to a connx.cdd odbc database using an 'ODBC data source'. Then I can successfully use sql queries on the connx system.
However, when I try to connect using Oracle Reports6i or Forms 6i using the same 'ODBC data source' an 'ORA - 03121 No interface driver connected' error message appears.
The connect string that I am using for Reports6i and Forms6i is:
obdc:rjtest and/or odbc:rjtest:connx.cdd
Any ideas on what the problem is?
Thanks
rj
null

this question is best directed to the reports or forms forums do to the specific issues of connecting to those products.

XP Oracle9 Developer2000 (Forms5) Listener ORA-03121

Whilst I appreciate this is de-supported...
I have Oracle9 installed on XP.
I have Forms5 and Forms6 installed too.
Forms6 connects to the database OK.
Forms5 errors with ORA-03121 no interface driver connected
Can anyone offer any guidance regarding this issue.
My email account is [email protected]

Mark,
I believe the problem may be XP related or with Forms 5 & 6 in the same Oracle Home. I am running Win2K Pro, Forms 4.5, Forms 6i, and Forms 9i. I am able to connect to Oracle DB 8i and 9i from all developer versions.
Again, I think your problem is with XP or as Frank stated earlier, with installing Forms 6 into the same oracle home as Forms 5.
I have all three products in their own Oracle Home. My Dev 2K products are in the Default_home and Dev 6i and 9i iDS products are in their own respective homes. This works for me (and everyone else in the shop) without any problems.
Oracle 9i Documentation states:
ORA-03121 no interface driver connected - function not performed
Cause: This message occurs usually because the Net8 driver is not loaded into memory or there is a mismatch of the version of the driver. A user program linked with an obsolete library may also cause this message. Only programs provided by Oracle Corporation should use this interface.
Action: If the message occurred during use of a program provided by Oracle Corporation, contact Oracle Support Services. If a user program caused the message, relink the program with current versions of the Oracle libraries.

Ora-00604 error and ora 01000 error while report generation.

hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.

Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000:     maximum open cursors exceeded
Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

Ora-00604,ora-01422 error while dropping the table

Hi gurus,
I am using Oracle 10g R2 on windows 2000 platform,while dropping the table the following error occured.
ORA-00604 : error occurred at recursive sql level 1.
ORA-01422: exact fetch returns more than requested number of rows.
Need urgent help.
Thanks in advance

Is there an AFTER EVENT trigger defined on this database? Can you check that?
Secondly, was this database migrated from earlier version? I remember having seen this problem on 9i (it was 9.2.0.1 or 9.2.0.2; I can't recall exactly).

Ora 600 error Arguments [25012] [11]

hi,
i've an ORA-00600: error Arguments [25012], [2], [11], [], [], [], [], [] by DELETE FROM table WHERE filed = :b1
ther are only 8 file in database. (not 11)
Can anybody help, or give me an information about Bug number: 742709
OS NT 4 / SP6 ORACLE RDBMS Version: 8.0.5.2.1.
Thank in advice
JFA

Trace File Contents:
============================================================================================
[oracle@oem trace]$ more /d01/app/guest/diag/rdbms/db11g/db11g/incident/incdir_191809/db11g_smon_4198_i191809.trc
Dump file /d01/app/guest/diag/rdbms/db11g/db11g/incident/incdir_191809/db11g_smon_4198_i191809.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /d01/app/guest/product/11.2.0/dbhome_1
System name: Linux
Node name: oem.tap.com
Release: 2.6.18-164.el5xen
Version: #1 SMP Thu Sep 3 02:41:56 EDT 2009
Machine: i686
Instance name: db11g
Redo thread mounted by this instance: 1
Oracle process number: 13
Unix process pid: 4198, image: [email protected] (SMON)
*** 2010-10-15 12:05:24.395
*** SESSION ID:(16.1) 2010-10-15 12:05:24.395
*** CLIENT ID:() 2010-10-15 12:05:24.395
*** SERVICE NAME:(SYS$BACKGROUND) 2010-10-15 12:05:24.395
*** MODULE NAME:() 2010-10-15 12:05:24.395
*** ACTION NAME:() 2010-10-15 12:05:24.395
Dump continued from file: /d01/app/guest/diag/rdbms/db11g/db11g/trace/db11g_smon_4198.trc
ORA-00600: internal error code, arguments: [13013], [5001], [267], [8444108], [2], [8444108], [17], [], [], [], [], []
========= Dump for incident 191809 (ORA 600 [13013]) ========
*** 2010-10-15 12:05:24.399
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=dma0vxbwh325p) -----
update smon_scn_time set time_mp=:1, time_dp=:2, scn=:3, scn_wrp=:4, scn_bas=:5, num_mappings=:6, tim_scn_map=:7 where scn = (sele
ct min(scn) from smon_scn_time)
==========================================================================================

Ora-01008 error with bind variable

Hi,
We have a test program which have one bind variable on a column which is varchar2(20), in the test program we've passed a 20 character string to the variable. The program returns error in one of the databases but all others are successful. We've checked the column is same in all of them.
Exception in thread "main" java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
ORA-01008: not all variables bound
Could you please advise how to troubleshoot this issue?
Regards

We aren't going to be able to help you if you won't post the database code that is giving the error.
And now we need the Java code that is constructing the query that you are using.
Your error is saying there is a second variable that you are not providing a value for.
And you said
>
We have a test program which have one bind variable on a column which is varchar2(20), in the test program we've passed a 20 character string to the variable.
>
But you are using a string that is 23 characters long
"a3g34-b13fd-efaie-f83fk"How does 23 go into 20?

Getting error-ORA-24381: error(s) in array DML

Hi i have written the following code to bulk insert into a database table.
I am getting an error while returning the result of the bulk insert query into the collection
I have tried to track it by using sql%bulk_exceptions.error_code.
But the error code that it is showing is just 1.
I trapped it using sqlerrm.
and that is showing-error(s) in array DML
What do i do?
DECLARE
   CURSOR temp_rec_tap_cur
   IS
      SELECT *
        FROM temp_records_tap;
   TYPE temp_rec_tab IS TABLE OF temp_rec_tap_cur%ROWTYPE;
   v_test_tab   temp_rec_tab;
   v_rec_num    num_tab;
   v_filename   temp_records_tap.file_name%TYPE;
   v_error_code tap_reject.error_code%type;
   v_rej_value tap_reject.field_rej%type;
   v_errors number;
BEGIN
   SELECT file_name
     INTO v_filename
     FROM table1
     WHERE ROWNUM<2;
   OPEN temp_rec_tap_cur;
   LOOP
      BEGIN
         FETCH temp_rec_tap_cur
         BULK COLLECT INTO v_test_tab LIMIT 1000;
         FORALL i IN v_test_tab.FIRST .. v_test_tab.LAST SAVE EXCEPTIONS
            INSERT INTO tapdetail_tapin
                 VALUES v_test_tab (i)
              RETURNING record_num
                BULK COLLECT INTO v_rec_num;
      EXCEPTION
         WHEN DUP_VAL_ON_INDEX
         THEN
            NULL;
         WHEN OTHERS
         THEN
         v_errors:=sql%bulk_exceptions.count;
         for i in 1..v_errors
         loop
         dbms_output.put_line(sql%bulk_exceptions(i).error_code);
         p3_errorlog ('TAPINDETAWARE', SQLERRM, v_filename);
         end loop;
         END;
            --RAISE;
      EXIT WHEN temp_rec_tap_cur%NOTFOUND;
   END LOOP;
INSERT INTO table2
SELECT file_id, file_name, sender_pmn, recipient_pmn, call_date,
             call_date_only, call_type, call_number, FIRST_RECORD,
             service_type, service_code, home_bid, serve_bid,
             chargeable_subs_type, imsi_min, msisdn_mdn, air_charges,
             air_charges_sdr, air_time, national_call_charges,
             national_call_charges_sdr, national_call_time,
             international_call_charges, international_call_charges_sdr,
             international_call_time, dir_assist_charges,
             dir_assist_charges_sdr, dir_assist_time, other_charges,
             other_charges_sdr, other_time, volume_charges,
             volume_charges_sdr, volume_units, tot_charges, tot_charges_sdr,
             tot_duration, state_tax, state_tax_sdr, local_tax,
             local_tax_sdr, state_and_use_tax, state_and_use_tax_sdr, va_tax,
             va_tax_sdr, other_tax, other_tax_sdr, charge_refund_indicator,
             advised_charge_currency, advised_charge, advised_charge_sdr,
             advised_charge_commission, advised_charge_commission_sdr,
             exchange_rate, mcc, mnc, process_date, chargeable_units,
             record_num, mscid,null,null,decode(call_type,0,'250',1,'251',5,'255'),null,'Duplicate Call'
             from temp_records_tap
             where record_num not in (select column_value from table(v_rec_num)) ;
EXCEPTION
WHEN OTHERS THEN
p3_errorlog ('TAP', SQLERRM, v_filename);
END;Edited by: user8731258 on Sep 14, 2010 2:58 AM
Edited by: user8731258 on Sep 14, 2010 3:01 AM

What is the type declaration of num_tab and how is record_num defined?
ORA-24381: error(s) in array DML
Cause: One or more rows failed in the DML.indicates that you fail on the insert itself. Are the table definitions the same? Same primary/unique keys?
Edited by: MBr on 14-Sep-2010 03:16

ORA-03121 Error

Similar Messages

Maybe you are looking for