ORA-04052: error occurred when looking up remote obj in mapping execution
Hi,
While executing an OWB mapping, I am getting the following error:
============
Starting Execution UII_D_MAP_SPC_INSTALLATION_SIT
Starting Task UII_D_MAP_SPC_INSTALLATION_SIT
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
ORA-02063: preceding 3 lines from BIP2S@BIPDRACONN
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 73
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 1672
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 2353
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 6838
ORA-06512: at line 1
Completing Task UII_D_MAP_SPC_INSTALLATION_SIT
Completing Execution UII_D_MAP_SPC_INSTALLATION_SIT
============
Actually, here UII_ODS_OWNER itself is the target schema and <<UIIVS.DEVENV1.BT.CO.UK>> is the database in which this schema exists. And the mapping "UII_D_MAP_SPC_INSTALLATION_SIT" is being executed in the same target schema UII_ODS_OWNER.
I am not sure why this above error is coming because such a dblink 'UIIVS.DEVENV1.BT.CO.UK' does not exist in the OWB generated package code. And the 2nd dblink 'BIP2S@BIPDRACONN' does not exist in the code, intead it exists as "BIP2S.DEVENV1.BT.CO.UK@BIPDRACONN" in the package code which is correct (as per OWB configuration & database).
Same error also comes when I try to execute the same mapping from the OWB DEPLOYMENT MANAGER.
Thanks & Regards,
lenin
Good morning Lenin,
Have you checked the implementation of the connectors and are your locations well registered?
Has a similar setup ever worked well?
Can you access the source table using SQL (e.g. with SQL*Plus or TOAD)?
Regards, Patrick
Similar Messages
-
PL/SQL: ORA-04052: error occurred when looking up remote object.
Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
KanchanaHi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009* -
Hello,
I'm trying to import data van 10XE version to new 11XE version over db_link.
When using the method I run into following error:
ORA-04052: error occurred when looking up remote object SYS.DBMS_UTILITY@<<db_link_name>>
This seems to be a bug in 10.2.0.1 fixed in later 10.2 versions, according to the database general forum. "upgrade to newer version"
But how do i fix this bug in 10XE? Or is the only way around to use the 'old-fashioned' way of exporting data from 10XE to a file, transfer the file and import it in 11XE?
Best regards,
Jan.No, you cannot apply a patch to XE. Basically the XE internal code is the same as for any other edition. That means is there a bug, you have it in XE,too. To get patches you need a licence for metalink/My Oracle Support. But even you would have one, it wouldn't help you, because Oracle does not provide patches for XE.
That's the 'price' you have to pay for this free edition.
Werner -
ORA-04052: error occurred when looking up remote object SYS.DBMS_SNAPSHOT
Hello everyone,
When I tried to create a materialized view with refresh fast mode, I encountered following error message.
The MV log has been created on my_table like this:
create materialized view log on my_table
tablespace data3
with rowid, sequence
including new values;
The database link has been created like this:
CREATE PUBLIC DATABASE LINK my_db
CONNECT TO myname
IDENTIFIED BY mypassword
USING 'my_db';
Could anybody please let me know why I can not create MV with refresh fast? What I did wrong?
Thanks in advance!!!
MYDB>select count(*) from my_table@my_db;
COUNT(*)
5
Elapsed: 00:00:00.01
MYDB>create materialized view my_mv
2 tablespace data4
3 build immediate
4 refresh fast with rowid
5 as
6 select * from my_table@my_db
select * from my_table@my_db
ERROR at line 6:
ORA-04052: error occurred when looking up remote object SYS.DBMS_SNAPSHOT@my_db
ORA-00604: error occurred at recursive SQL level 2
ORA-06544: PL/SQL: internal error, arguments: [55916], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [55916]
ORA-02063: preceding 2 lines from my_db
Elapsed: 00:00:00.29
MYDB>create materialized view my_mv
2 tablespace data4
3 build immediate
4 as
5 select * from my_table@my_db;
Materialized view created.
Elapsed: 00:00:00.20No, you cannot apply a patch to XE. Basically the XE internal code is the same as for any other edition. That means is there a bug, you have it in XE,too. To get patches you need a licence for metalink/My Oracle Support. But even you would have one, it wouldn't help you, because Oracle does not provide patches for XE.
That's the 'price' you have to pay for this free edition.
Werner -
ORA-04052: error occurred when looking up remote object
Hi, Basically I want to setup Replication between two servers, 'ZEN2K7' & 'DB' (Advanced master-to-master replication, Sync).
This is what i had done so far.(Both server having ver 10.1.0.2.0)
At Server 'ZEN2K7'
CONNECT system/manager@ZEN2K7
CREATE USER repadmin IDENTIFIED BY repadmin;
ALTER USER repadmin DEFAULT TABLESPACE POOL_DATA;
ALTER USER repadmin TEMPORARY TABLESPACE TEMP;
GRANT connect, resource TO repadmin;
EXECUTE dbms_repcat_admin.grant_admin_any_schema('repadmin');
GRANT comment any table TO repadmin;
GRANT lock any table TO repadmin;
EXECUTE dbms_defer_sys.register_propagator('repadmin');
GRANT execute any procedure TO repadmin;
CREATE PUBLIC DATABASE LINK DB USING 'DB';
CONNECT repadmin/repadmin@ZEN2K7
CREATE DATABASE LINK DB CONNECT TO repadmin IDENTIFIED BY repadmin;
At Server 'DB'
CONNECT system/manager@DB
CREATE USER repadmin IDENTIFIED BY repadmin;
ALTER USER repadmin DEFAULT TABLESPACE POOL_DATA;
ALTER USER repadmin TEMPORARY TABLESPACE TEMP;
GRANT connect, resource TO repadmin;
EXECUTE dbms_repcat_admin.grant_admin_any_schema('repadmin');
GRANT comment any table TO repadmin;
GRANT lock any table TO repadmin;
EXECUTE dbms_defer_sys.register_propagator('repadmin');
GRANT execute any procedure TO repadmin;
CREATE PUBLIC DATABASE LINK ZEN2K7 USING 'ZEN2K7';
CONNECT repadmin/repadmin@DB
CREATE DATABASE LINK ZEN2K7 CONNECT TO repadmin IDENTIFIED BY repadmin;
After this, Create master replication group on ZEN2K7
CONNECT repadmin/repadmin@ZEN2K7
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => '"REPTEST"',
qualifier => '',
group_comment => '');
END;
Then at 'ZEN2K7', when i executing
BEGIN
DBMS_REPCAT.ADD_MASTER_DATABASE(
gname => '"REPTEST"',
master => 'DB',
use_existing_objects => TRUE ,
copy_rows => TRUE ,
propagation_mode =>'SYNCHRONOUS');
END;
I got following error
ORA-04052: error occurred when looking up remote object REPADMIN.SYS@DB
ORA-00604: error occurred at recursive SQL level 2
ORA-12154: TNS:could not resolve the connect identifier specified
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 4262
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 2156
ORA-06512: at "SYS.DBMS_REPCAT", line 146
ORA-06512: at line 2
I had already execute the 'catrpc.sql' on both server.
I had already check the connection at 'ZEN2K7' side, means I can connect to 'DB' within SQL* Plus at 'ZEN2K7' side.
What else need to do???
Thanks.
Gurpreet S. GillORA-12154: TNS:could not resolve the connect identifier specified
This means that you server is unable to resolve DB alias.
Check you SQL*Net settings.
On ZEN2K7 try tnsping db. If tnsping return error that add db alias to tnsnames.ora if you use tnsnames as one of resolving mechanism (check sqlnet.ora for NAMES.DIRECTORY_PATH) -
Hi,
on 10gR2 , on WIN 2003 server :
C:\>sqlplus repadmin/***@CEL2.WORLD
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Jun 22 09:54:18 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsAnd then :
CONNECT repadmin/******@CEL1.WORLD
BEGIN
DBMS_REPCAT.ADD_MASTER_DATABASE (
gname => 'REPG',
master => 'CEL2.WORLD',
use_existing_objects => TRUE,
copy_rows => FALSE,
propagation_mode => 'ASYNCHRONOUS');
END;
BEGIN
ERROR at line 1:
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 2
ORA-12545: Connect failed because target host or object does not exist
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 4271
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 2156
ORA-06512: at "SYS.DBMS_REPCAT", line 146
ORA-06512: at line 2Thank for help.Thank you. I think it is a problem with dB_LINK.
SQL> select db_link from dba_db_links;
DB_LINK
CEL2.WORLD
CEL2.WORLD
SQL> select count(*) from [email protected];
select count(*) from [email protected]
ERROR at line 1:
ORA-12505: TNS:listener does not currently know of SID given in connect
descriptor
SQL> select count(*) from SCOTT.EMP@CEL2;
select count(*) from SCOTT.EMP@CEL2
ERROR at line 1:
ORA-02019: connection description for remote database not foundI can not see how to correct it ?
Thanks. -
ORA-04052: error occurred when looking up remote object STRMADMIN.DBMS_AQAD
ORA-04052: error occurred when looking up remote object STRMADMIN.DBMS_AQADM@PROD
ORA-00604: error occurred at recursive SQL level 4
ORA-12170: TNS:Connect timeout occurred
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7616
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
my capture and apply proccess are enable.but the propagation gives the above error
how could i sole this?Compliant to global_name ? Please browse a bit this forum, global name issue arise every 2 days.
STRMADMIN.DBMS_AQADM@PROD -
Simple Single-Source Replication(error occurred when looking up remote obj)
Dears
I am following the "Simple Single-Source Replication Example"
(http://download.oracle.com/docs/cd/B19306_01/server.102/b14228/repsimpdemo.htm#g1033597)
In Configure Capture, Propagation, and Apply for Changes to One Table; when I Set the Instantiation SCN for the hr.jobs Table at str2.net by following procedure
SQL> DECLARE
2 iscn NUMBER; -- Variable to hold instantiation SCN value
3 BEGIN
4 iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
5 [email protected](
6 source_object_name => 'scott.emp',
7 source_database_name => 'str1.net',
8 instantiation_scn => iscn);
9 END;
10 /
DECLARE
ERROR at line 1:
ORA-04052: error occurred when looking up remote object
[email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02085: database link STR2.NET connects to
ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM
Note also advise where should I have to execute above at (STR1.NET or STR2.NET)
regards;Good morning Lenin,
Have you checked the implementation of the connectors and are your locations well registered?
Has a similar setup ever worked well?
Can you access the source table using SQL (e.g. with SQL*Plus or TOAD)?
Regards, Patrick -
ORA-04052: Error occurs when execute the block
I'm trying to run one block and his query definition uses an active public database link. When I ran the script to block I get the following message:
ERROR in line 1:
ORA-04052: error occurred when looking up remote object
SQ_DSV.temp_tipo_contr@SQ_DSV tc
ORA-00604: error occurred at recursive SQL level 1
But when I execute his definition query all is ok, the query works fine.
I mean, I'm using the following sentence to block:
declare
Cursor Tipo_Contr is
Select tc.rec_id, tc.tipo_contr from SQ_DSV.temp_tipo_contr@SQ_DSV tc;
begin
For Reg_Tipo_Contr in Tipo_Contr Loop
Begin
Update recursos Set tpcontr_id = Reg_Tipo_Contr.tipo_contr
where rec_id = Reg_Tipo_Contr.rec_id;
exception when others then
dbms_output.put_line(Reg_Tipo_Contr.rec_id || ' Not find');
end;
end loop;
-- Commit;
end;
I checked for the GLOBAL_NAMES parameter and it is set to FALSE. Please help me, How can I fix this problem ?
I'm using Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production running over Win XP for run block.
Thanks you, Paulo.ORA-04052 error occurred when looking up remote object stringstringstringstringstring
Cause: An error has occurred when trying to look up a remote object.
Action: Fix the error. Make sure the remote database system has run KGLR.SQL to create necessary views used for querying/looking up objects stored in the database.
Regards
Marcio Paiva -
Getting "error occurred when looking up remote object" During IMPDP
Hi
I am doing a migration from one server to another server. I am on testing period. I am working on this setup
SALESDB - RHEL 5.2(64bit) and Oracle Database 10.2.0.4
It has schemas: SALESMGR, TARGET, REPORT and FINANCE
These schemas will be migration to another database with the same name (we will be shutting down SALESDB 10g after the migration)
SALESDB - RHEL 5.5(64bit) and Oracle Database 11.2.0.2
====================================
The EXPDP process of the schemas in 10g DB are good and no errors where encountered. But during the IMPDP process of the schemas in 11g DB, I got the follwing erorrs:
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "BEGINNING_BALANCE_PKG" COMPILE REUSE SETTINGS TIMESTAMP '200"*
*"9-05-11:09:26:16'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_FAULT_CODES" COMPILE REUSE SETTINGS TIMESTAMP '2009-05-1"*
*"0:02:49:13'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_IFACE_SALESPRD_DATA" COMPILE REUSE SETTINGS TIMESTAMP '20"*
*"11-09-22:10:33:12'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESMGR@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_COPY_TC_RECPT_TO_ITEM_RECPT" COMPILE REUSE SETTINGS TIMESTAM"*
*"P '2009-05-10:06:07:09'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_SALES_INVOICE_CREATE_XML_TR" COMPILE REUSE SETTINGS TIMESTAM"*
*"P '2009-05-10:06:07:23'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_TR_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_SALES_INVOICE_CREATE_XML" COMPILE REUSE SETTINGS TIMESTAMP '"*
*"2009-05-10:06:03:01'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_PARSE_GRAPHIC" COMPILE REUSE SETTINGS TIMESTAMP '2009-05"*
*"-10:06:07:23'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
*. importing SALESMGR's objects into SALESMGR*
*. importing SALESMGR's objects into SALESMGR*
I have not created the complete TNS entries in the TNSNAMES.ORA file in the new Oracle 11g. We will be updating this on the actual migration process. Is this the root cause of the problem? I am sure that all database links are existing but upon validating it, it says "ORA-02019: connection description for remote database not found."
Any ideas or feedback on this?
Thanks!Hello,
Yes, this is the root cause : Oracle can not compile your packages if it can not connect to remote tables.
You have to create those entries in your tnsnames, but may be you can reference some test databases in your tnsnames instead of the real production databases, to avoid mistakes.
Regards,
Sylvie -
An error occurred when executing a REMOTE FUNCTION CALL.
Dear all,
We have two syetms called DXD and GRD , we have a remote enabled function module in the DXD system , when i am trying to call this Function module from
GRD system it is going for the short dump, and giving the follwing error,
<b>Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "RFC_NO_AUTHORITY"
on the called page.</b>
But i do have the access for the DXD system also, i am really struggling to solve this problem, if any lights are there to help me , i will be thank full for then,
some body suggested for me that we need to maintain the Trusted system tables in the target system.
Thanks & regards
Satya.first u( user id ) have to get the Authorizations to use RFC ?
object will be like S_RFC or some thing like this.
when u get this kind of error just call /NSU53 then u will come to know which Authorization Object is missing from ur User Profile.
Regards
Prabhu -
ORA-25228 error occurs when Foreign JMS Server connecting to the Oracle AQ
Hi,
I configure of a Foreign JMS Server that uses the Oracle JDBC Driver to connect to the AQ Topic. I use OSB messaging proxy service as a JMS client to connect the Foreign JMS Server. After the launch, I get the following error:
####<Jan 30, 2013 4:51:49 AM MSK> <Error> <EJB> <EPRUSARW0520> <osb_server1> <RequestEJB7826682746890400115XX35047bed.13c85602eea.X7f53> <<anonymous>> <> <0000Jm8w2Es6qI_5xRh8iW1H1sMk0001sD> <1359507109078> <BEA-010079> <An error occurred while attempting to receive a message from JMS for processing by a message-driven bean: oracle.jms.AQjmsException: JMS-120: Dequeue failed
Nested exception: java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 11
ORA-25228: timeout or end-of-fetch during message dequeue from MDM.ALL_NSI
The exception is : oracle.jms.AQjmsException: JMS-120: Dequeue failed
at oracle.jms.AQjmsError.throwEx(AQjmsError.java:315)
at oracle.jms.AQjmsConsumer.jdbcDequeue(AQjmsConsumer.java:1620)
at oracle.jms.AQjmsConsumer.receiveFromAQ(AQjmsConsumer.java:1035)
at oracle.jms.AQjmsConsumer.receiveFromAQ(AQjmsConsumer.java:960)
at oracle.jms.AQjmsConsumer.receiveFromAQ(AQjmsConsumer.java:938)
at oracle.jms.AQjmsConsumer.receive(AQjmsConsumer.java:790)
at weblogic.deployment.jms.WrappedMessageConsumer.receive(WrappedMessageConsumer.java:201)
at weblogic.ejb.container.internal.JMSMessagePoller$1.run(JMSMessagePoller.java:262)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.ejb.container.internal.JMSConnectionPoller.doPrivilegedJMSAction(JMSConnectionPoller.java:2752)
at weblogic.ejb.container.internal.JMSMessagePoller.processOneMessage(JMSMessagePoller.java:257)
at weblogic.ejb.container.internal.JMSMessagePoller.pollContinuously(JMSMessagePoller.java:351)
at weblogic.ejb.container.internal.JMSMessagePoller.pollForParent(JMSMessagePoller.java:483)
at weblogic.ejb.container.internal.JMSMessagePoller.run(JMSMessagePoller.java:499)
at java.lang.Thread.run(Thread.java:722)
Caused by: java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 11
ORA-25228: timeout or end-of-fetch during message dequeue from MDM.ALL_NSI
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:397)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)
at oracle.jdbc.driver.T4Caqdq.processError(T4Caqdq.java:497)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4Caqdq.doOAQDQ(T4Caqdq.java:183)
at oracle.jdbc.driver.T4CConnection.doDequeue(T4CConnection.java:4704)
at oracle.jdbc.driver.PhysicalConnection.dequeue(PhysicalConnection.java:17863)
at oracle.jdbc.driver.PhysicalConnection.dequeue(PhysicalConnection.java:17949)
at oracle.jdbc.OracleConnectionWrapper.dequeue(OracleConnectionWrapper.java:1624)
at weblogic.jdbc.wrapper.XAConnection_oracle_jdbc_driver_LogicalConnection.dequeue(Unknown Source)
at weblogic.jdbc.wrapper.JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection.dequeue(Unknown Source)
at oracle.jms.AQjmsConsumer.jdbcConnectionDequeueCheck25242(AQjmsConsumer.java:1713)
at oracle.jms.AQjmsConsumer.jdbcDequeue(AQjmsConsumer.java:1295)
... 13 moreHowever, when I put message to AQ topic, the OSB proxy receives and processes it. But SQLException occurs every five seconds and pollute logs.
Request help to resolve this.
Thanks in advance.
Regards
Alexander.Maybe this can help: http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::p11_question_id:4018285967344
-
ORA-03113 error occurs when trying to insert record using procedure
I have a Database Block whose DML Data Target Type is Procedure. I have given the Insert Procedure Name, Insert Procedure Arguments and Insert Procedure ResultSet Columns. The procedure which is used to insert record into the table, resides in the database. The procedure for insert takes Table of records as argument. I am getting FRM-40735: INSERT-PROCEDURE trigger raised unhandled exception ORA-03113).
This exception does not occur if the Procedure is place under Program Units. But, I want the procedure to be under Database Block. I am working on Oracle Forms 6i.
Please help me out in resolving this.Hello,
I think you should call the support for this kind of error.
Francois -
ORA:03113 Error occuring when trying to recompile a Trigger
Hi ,
I am facing ORA-03113 end-of-file on communication channel Error.
My V$version ouput is as follows
BANNER
Oracle9i Enterprise Edition Release 9.0.1.5.0 - Production
PL/SQL Release 9.0.1.5.0 - Production
CORE 9.0.1.2.0 Production
TNS for Linux: Version 9.0.1.4.0 - Production
NLSRTL Version 9.0.1.5.0 - Production
I searched in google and in all actions to be performed is to submit a request to Oracle Support.
Is there any another way to resolve this problem?
Please guide me.
Thanks & Regards
Salih KMHi APC,
I am posting the lines from alert log file and trace files.
Alert Log Entries
Mon Sep 18 17:46:35 2006
Errors in file /mnt1/oraclepaws/admin/paws/udump/ora_9368.trc:
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Mon Sep 18 17:46:35 2006
Errors in file /mnt1/oraclepaws/admin/paws/udump/ora_9368.trc:
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Mon Sep 18 17:46:35 2006
Errors in file /mnt1/oraclepaws/admin/paws/udump/ora_9368.trc:
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Mon Sep 18 17:47:27 2006
Errors in file /mnt1/oraclepaws/admin/paws/udump/ora_10718.trc:
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Mon Sep 18 17:47:27 2006
Errors in file /mnt1/oraclepaws/admin/paws/udump/ora_10718.trc:
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Mon Sep 18 17:47:27 2006
Errors in file /mnt1/oraclepaws/admin/paws/udump/ora_10718.trc:
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Trace File
(10718)
*** 2006-09-18 17:47:26.998
*** SESSION ID:(28.39) 2006-09-18 17:47:26.998
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x8, PC: [0x94c245f, ptmak()+111]
*** 2006-09-18 17:47:27.060
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Current SQL statement for this session:
CREATE OR REPLACE TRIGGER Das.TEST_TABLE_TRG
AFTER INSERT
ON Das.TEST_TABLE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
IF :NEW.COL1 ='TEST' THEN
RAISE_APPLICATION_ERROR(-20001,'Testing error');
END IF;
END TEST_TABLE_TRG;
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x0, PC: [0x405490a0, strcpy()+64]
*** 2006-09-18 17:47:27.197
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Current SQL statement for this session:
CREATE OR REPLACE TRIGGER Das.TEST_TABLE_TRG
AFTER INSERT
ON Das.TEST_TABLE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
IF :NEW.COL1 ='TEST' THEN
RAISE_APPLICATION_ERROR(-20001,'Testing error');
END IF;
END TEST_TABLE_TRG;
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x0, PC: [0x405490a0, strcpy()+64]
*** 2006-09-18 17:47:27.344
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Current SQL statement for this session:
CREATE OR REPLACE TRIGGER Das.TEST_TABLE_TRG
AFTER INSERT
ON Das.TEST_TABLE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
IF :NEW.COL1 ='TEST' THEN
RAISE_APPLICATION_ERROR(-20001,'Testing error');
END IF;
END TEST_TABLE_TRG;
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
Trace File (9368)
Oracle9i Enterprise Edition Release 9.0.1.5.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - Production
ORACLE_HOME = /mnt1/oracle/orainfra
System name: Linux
Release: 2.4.9-e.25
Version: #1 Wed Sep 1 12:40:42 EEST 2004
Machine: i686
Instance name: paws
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 9368, image: [email protected] (TNS V1-V3)
*** 2006-09-18 17:46:34.557
*** SESSION ID:(21.124) 2006-09-18 17:46:34.552
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x8, PC: [0x94c245f, ptmak()+111]
*** 2006-09-18 17:46:35.515
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Current SQL statement for this session:
CREATE OR REPLACE TRIGGER Das.TEST_TABLE_TRG
AFTER INSERT
ON Das.TEST_TABLE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
NAME: TEST_TABLE_TRG
PURPOSE:
REVISIONS:
Ver Date Author Description
1.0 9/18/2006 1. Created this trigger.
NOTES:
Automatically available Auto Replace Keywords:
Object Name: TEST_TABLE_TRG
Sysdate: 9/18/2006
Date and Time: 9/18/2006, 6:01:02 PM, and 9/18/2006 6:01:02 PM
Username: (set in TOAD Options, Proc Templates)
Table Name: TEST_TABLE (set in the "New PL/SQL Object" dialog)
Trigger Options: (set in the "New PL/SQL Object" dialog)
BEGIN
IF :NEW.COL1 ='TEST' THEN
RAISE_APPLICATION_ERROR(-20001,'Testing error');
END IF;
END TEST_TABLE_TRG;
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x0, PC: [0x405490a0, strcpy()+64]
*** 2006-09-18 17:46:35.814
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Current SQL statement for this session:
CREATE OR REPLACE TRIGGER Das.TEST_TABLE_TRG
AFTER INSERT
ON Das.TEST_TABLE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
NAME: TEST_TABLE_TRG
PURPOSE:
REVISIONS:
Ver Date Author Description
1.0 9/18/2006 1. Created this trigger.
NOTES:
Automatically available Auto Replace Keywords:
Object Name: TEST_TABLE_TRG
Sysdate: 9/18/2006
Date and Time: 9/18/2006, 6:01:02 PM, and 9/18/2006 6:01:02 PM
Username: (set in TOAD Options, Proc Templates)
Table Name: TEST_TABLE (set in the "New PL/SQL Object" dialog)
Trigger Options: (set in the "New PL/SQL Object" dialog)
BEGIN
IF :NEW.COL1 ='TEST' THEN
RAISE_APPLICATION_ERROR(-20001,'Testing error');
END IF;
END TEST_TABLE_TRG;
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x0, PC: [0x405490a0, strcpy()+64]
*** 2006-09-18 17:46:35.968
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [strcpy()+64] [SIGSEGV] [Address not mapped to object] [0x0] [] []
ORA-07445: exception encountered: core dump [ptmak()+111] [SIGSEGV] [Address not mapped to object] [0x8] [] []
Current SQL statement for this session:
CREATE OR REPLACE TRIGGER Das.TEST_TABLE_TRG
AFTER INSERT
ON Das.TEST_TABLE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
NAME: TEST_TABLE_TRG
PURPOSE:
REVISIONS:
Ver Date Author Description
1.0 9/18/2006 1. Created this trigger.
NOTES:
Automatically available Auto Replace Keywords:
Object Name: TEST_TABLE_TRG
Sysdate: 9/18/2006
Date and Time: 9/18/2006, 6:01:02 PM, and 9/18/2006 6:01:02 PM
Username: (set in TOAD Options, Proc Templates)
Table Name: TEST_TABLE (set in the "New PL/SQL Object" dialog)
Trigger Options: (set in the "New PL/SQL Object" dialog)
BEGIN
IF :NEW.COL1 ='TEST' THEN
RAISE_APPLICATION_ERROR(-20001,'Testing error');
END IF;
END TEST_TABLE_TRG;
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
Please guide me in this issue.
I'm also studying the link given by oradba
Thanks & Regards
Salih KM
Message was edited by:
kmsalih -
Why am I getting an ORA-04052 error when I try to compile a Procedure?
Hi,
The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
CREATE OR REPLACE PROCEDURE APPS.Find_String (
pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
IS
cursor cur_get_dependancy
is
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;
v_owner varchar2(40);
v_name varchar2(50);
v_type varchar2(40);
BEGIN
dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
dbms_output.put_line(' ');
dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
FOR i IN cur_get_dependancy
LOOP
v_owner := RPAD(i.owner, 30, ' ');
v_name := RPAD(i.name, 45, ' ');
v_type := RPAD(i.type, 30, ' ');
dbms_output.put_line(v_owner ||v_name|| v_type);
END LOOP;
END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
What's even stranger is that I took the SELECT statement
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02068: following severe error from PINP
ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?OK Justin,
Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
SQL> conn apps/apps1@dev1
Connected.
SQL> SELECT distinct owner, name, type
2 FROM [email protected]
3 WHERE lower(referenced_name) = lower('ALL_USERS')
4 AND referenced_type <> 'SYNONYM'
5 AND owner <> 'SYS'
6 order by name;
OWNER NAME TYPE
PUBLIC ALL_USERS SYNONYM
XDB DBMS_XDBUTIL_INT PACKAGE BODY
XDB DBMS_XDBZ0 PACKAGE BODY
SYSTEM MVIEW_EVALUATIONS VIEW
SYSTEM MVIEW_EXCEPTIONS VIEW
SYSTEM MVIEW_FILTER VIEW
SYSTEM MVIEW_LOG VIEW
SYSTEM MVIEW_RECOMMENDATIONS VIEW
SYSTEM MVIEW_WORKLOAD VIEW
ORASSO WWCTX_API PACKAGE BODY
PORTAL WWCTX_API PACKAGE BODY
ORASSO WWEXP_UTL PACKAGE BODY
PORTAL WWEXP_UTL PACKAGE BODY
PORTAL WWPOB_API_PAGE PACKAGE BODY
PORTAL WWPOF PACKAGE BODY
ORASSO WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWSBR_EDIT_ATTRIBUTE PACKAGE BODY
PORTAL WWSBR_FOLDER_PORTLET PACKAGE BODY
PORTAL WWSBR_USER_PAGES_PORTLET PACKAGE BODY
ORASSO WWUTL_API_PARSE PACKAGE BODY
OWNER NAME TYPE
PORTAL WWUTL_API_PARSE PACKAGE BODY
PORTAL WWUTL_EXPORT_IMPORT_LOV PACKAGE BODY
ORASSO WWUTL_LOV PACKAGE BODY
PORTAL WWUTL_LOV PACKAGE BODY
PORTAL WWV_CONTEXT PACKAGE BODY
PORTAL WWV_CONTEXT_UTIL PACKAGE BODY
PORTAL WWV_DDL PACKAGE BODY
PORTAL WWV_GENERATE_UTL PACKAGE BODY
PORTAL WWV_GLOBAL PACKAGE
PORTAL WWV_MONITOR_DATABASE PACKAGE BODY
PORTAL WWV_PARSE_AS_SPECIFIC_USER PACKAGE BODY
PORTAL WWV_PARSE_AS_USER PACKAGE BODY
PORTAL WWV_SYS_DML PACKAGE BODY
PORTAL WWV_SYS_RENDER_HIERARCHY PACKAGE BODY
PORTAL WWV_THINGSAVE PACKAGE BODY
PORTAL WWV_UTIL PACKAGE BODY
PORTAL WWV_UTLVALID PACKAGE BODY
38 rows selected.
SQL>Let me know what you think.
Thanks again.
Maybe you are looking for
-
I have been operating my MacBook Pro 15" (Mac OS 10.7.5), with Windows 7 - Parallels Desktop, for about one and one-half years. However, whenever I execute a Time Machine back-up, and leave the system to complete the process, I return only to find t
-
My iphone 3gs keeps loosing wi-fi at home
Has anyone got any ideas as my phone keeps loosing the wi-fi connection at home. Its only in the next room but keeps disconnecting. Please any ideas would be great.
-
Availability of TV show episodes from Irish iTunes
Anyone any idea how to download tv show episodes if you have an Irish account? The link seems to only be on the USA sites. I know licensing etc wont allow current ones to be downloaded, but I was hoping to access some old episodes of like CSI etc. An
-
I had no trouble burning with Itunes until two days ago. When I tried to burn, the disc was prepared, then the burn was cancelled with the message "unknown error occurred" (-3) I use a speed of 2x to burn discs.
-
Hello all, I have been wracking my brain and searching the interwebs furiously for days now. Help! I am trying to create an AppleScript that will change the default account in Mail. Here's the scenario: I use MarcoPolo to see when my laptop is at wor