ORA-06502 when calling from a procedure

HI,
I have a procedure(p1) inside a package that queries a table and send out the result based on the input paramater value. OUT variable is of same type as the table column(using %type), column size is varchar2(4000). This procedure is called from another procedure(p2) and sends out the result to Java Page to display the results at front-end.
Problem is when application runs and p1 is called I get the following error message,
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Length/size of the character string queried from table is _1747_ that is within the limit of 4000 chars. If I limit the output to just 500 using substr, I don't get any error but adding a single character startes throwing error. OUT variable in both p1 and p2 are declared as table.column%type and error comes from p1 only as confirmed by the error log.
When I call p1 or p2 from a declare block, I don't get any error.
This has really confused me and I am not able to find any reason for this difference in behaviour.
Request to help me in understanding what could be the issue here.
Oracle version used is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
-Thanks in Advance.

CREATE or replace PROCEDURE p1
( l_id IN VARCHAR2
, l_str OUT VARCHAR2
) IS
l_temp VARCHAR2(4000);
BEGIN
SELECT Response_Message INTO l_temp FROM t1 WHERE Response_ID = l_id;
l_str := l_temp||'10 symbols';
END;
CREATE or replace PROCEDURE p2
( l_id IN VARCHAR2
, l_str OUT VARCHAR2
) IS
BEGIN
p1(l_id, l_str);
END;
/no errors in procedures, but
DECLARE
resultstr VARCHAR2(1000);
BEGIN
p2(58, resultstr);
DBMS_OUTPUT.PUT_LINE(resultstr);
END;
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "P1", line 8
ORA-06512: at "P2", line 6
ORA-06512: at line 4Procedure is called with small variable.
Try check all calls and all procedures for size and check if there are string concatenations.

Similar Messages

'ORA-06502 character string buffer too small' when called from C# app

I have researched this problem and checked my variable sizes over and over again. I have tested the procedure within the Oracle Express environment and it works fine; HOWEVER, when the procedure is called from my C# app it produces the ORA-06502 error.
The stored procedure signature looks like this...
create or replace save_new_project (p_custorgid in number,
p_title in varchar2,
p_AOIName in varchar2,
p_description in varchar2,
p_receiveddate in date,
p_deadlinedate in date,
p_startdate in date,
p_createddate in date,
p_createdby in varchar2,
p_projectid out number,
p_statustypedescrip out varchar2)The OracleParameter in my C# app for the last out param is defined as such...
cmd.Parameters.Add(new OracleParameter("p_statustypedescrip", OracleDbType.Varchar2, 30, ParameterDirection.Output));As I said at the beginning of this post, the procedure works fine in the Oracle environment. So why is it not working by simply calling it from C#? I've tried changing the OracleDbType to CLOB which eliminates the error but it returns a bizarre result. It returns this string, "Oracle.DataAccess.Types.OracleClob". WTH?!!
Since CLOB doesn't really work either I switch back to Varchar2 and specify a size of 5000 (in the database the field I am querying is defined as Varchar(30)). I still get the ORA-06502 error.
I am clueless as to what the problem is. It should work and it does if I run a series of SQL statements in an Oracle SQL Command window. The test that works fine looks like this...
declare
v_projid projects.projectid%type;
v_statustypedescrip projectstatustypes.type%type; /* this is a varchar(30) */
begin
save_new_project(2, 'Some input text goes here', 'More input text', 'And more again','26-APR-2007','26-APR-2007','26-APR-2007','26-APR-2007','users name as inpujt text here',v_projid,v_statustypedescrip);
dbms_output.put_line('v_projid = ' || v_projid);
dbms_output.put_line('v_statustypedescrip = ' || v_statustypedescrip);
end;But calling save_new_project from C# throws ORA-06502. It identifies line 40 of my stored procedure. This is line 40...
p_statustypedescrip := v_statustypedescrip;

Problem solved!!!
I don't know why this worked but it did. I changed how I declared the output parameter in my C# app. I used to have it on one line like this...
cmd.Parameters.Add(new OracleParameter("p_statustypedescrip", OracleDbType.Varchar2, 30, ParameterDirection.Output));but then I changed it to multiple lines like this...
OracleParameter prm11 = new OracleParameter();
prm11.ParameterName = "p_statustypedescrip";
prm11.OracleDbType = OracleDbType.Varchar2;
prm11.Size = 30;
prm11.Direction = ParameterDirection.Output;
cmd.Parameters.Add(prm11);I don't know why it works this way but it does and that's all I care about.

ORA-02074 when calling proc from VB

Anyone have any idea why a stored procedure that sets a savepoint will fail with
[Oracle][ODBC][Ora]ORA-02074: cannot ROLLBACK in a distributed transaction
ORA-02074: cannot SET SAVEPOINT in a distributed transaction
ORA-06512: at "PIPS_ADMIN.PKG_ACAS_COMMON", line 1098
ORA-06512: at line 1
when called from Visual Basic via an ADO connection through ODBC BUT
will succeed when called from SQL*Plus or TOAD or other tool.
Any ideas appreciated.
Mike

The change was only made to a local variable in a function that was called from the original function that got the parameters from the java client.
I changed it from localtimestamp to systimestamp and it works fine.
Do i have to make any settings about the time zone in the jdbc thin client ?

Stored Procedure Does Not Run Properly When Called From Portlet

We have a simple Java portlet that calls a PL/SQL stored procedure which we wrote. The stored procedure sends a large number of emails to users in our corporation using the "utl_smtp" package. The stored procedure returns a count of the emails back to the Java portlet when it's finished. This number is displayed in the portlet.
Our problem:
The stored procedure functions as expected when run from a PL/SQL block in SQL*Plus, and the Java portlet calls the procedure properly when sending out a smaller number of emails (Less than 200 usually). When we get into a higher number of emails the procedure hangs when called from the portlet, but it STILL functions properly from SQL*Plus. It does not return the number of emails sent
and the Java portlet is unable to return a SQLException. Also, we have noticed that emails are sent at a much slower pace from the stored procedure when it's called from the portlet.

Any Ideas?

ORA-01804 when calling function from java client

Hi All,
we changed a PL/SQL-function that is called from a java client from using sysdate to localtimestamp. The function works fine in TOAD, but when called from the java client ist throws an ora-01804: failure to initialize timezone information.
Any suggestions?
Alexander

The change was only made to a local variable in a function that was called from the original function that got the parameters from the java client.
I changed it from localtimestamp to systimestamp and it works fine.
Do i have to make any settings about the time zone in the jdbc thin client ?

Error ORA-06502 When using function REPLACE in PL/SQL

Hi,
I have a PL/SQL procedure which gives error 'Error ORA-06502 When using function REPLACE in PL/SQL' when the string value is quite long (I noticed this with a string 9K in length)
variable var_a is of type CLOB
and the assignment statement where it gives the error is
var_a := REPLACE(var_a, '^', ''',''');
Can anyone please help!
Thanks

Even then that shouldn't do so:
SQL> select overload, position, argument_name, data_type, in_out
2 from all_arguments
3 where package_name = 'STANDARD'
4 and object_name = 'LPAD'
5 order by 1,2
6 /
OVERLOAD   POSITION ARGUMENT_NAME                  DATA_TYPE                      IN_OUT
1                 0                                VARCHAR2                       OUT
1                 1 STR1                           VARCHAR2                       IN
1                 2 LEN                            BINARY_INTEGER                 IN
1                 3 PAD                            VARCHAR2                       IN
2                 0                                VARCHAR2                       OUT
2                 1 STR1                           VARCHAR2                       IN
2                 2 LEN                            BINARY_INTEGER                 IN
3                 0                                CLOB                           OUT
3                 1 STR1                           CLOB                           IN
3                 2 LEN                            NUMBER                         IN
3                 3 PAD                            CLOB                           IN
4                 0                                CLOB                           OUT
4                 1 STR1                           CLOB                           IN
4                 2 LEN                            NUMBER                         INI wonder what happened?

ORA-23421 when calling dbms_defer_sys.schedule_purge

Hi all,
did anyone experience ORA-23421 when calling dbms_defer_sys.schedule_purge?
for settimg up an updatable materialized view replication between two Oracle 9.2 databases, I followed the steps detailed in "Oracle9i Replication Management API Reference" and when calling
DBMS_DEFER_SYS.SCHEDULE_PURGE (
next_date => SYSDATE,
interval => 'SYSDATE + 1/24',
delay_seconds => 0,
rollback_segment => '');
on the materialized view site, I get the error ORA-23421, telling me, that job number 48 is not a job in the job queue.
Do you have any idea, what's going wrong?
Thanks for your assistance
Siegfried Hartung

The answer could be found at http://www.orafaq.com/forum/t/66106/0/
From a previous run of the initialization scripts another user owned the job, that was adressed. The issue was resolved by changing the script in order to use the old userid (snapadmin instead of mvadmin).

PicDelete and PicLoad asking to save changes when called from SUD

Hello!
I'm trying to load different reports, change text values and graphics and export those reports to images. Sometimes I want to remove all reportsheets and load a new layout, but when calling picdelete a messagebox pops up and asks the user whether he wants to save the changes. I'm trying to get rid of that messagebox because my script gets halted and I don't want the user to overwrite my layout.
This only happens when picdelete is called from a SUD and for the picdelete command this behaviour can be circumvented by using Call Execute("Call picdelete"). Sadly the same procedure does not work for the picload command.
When called from the DIAdem scripting tab the report is loaded fine but I have found no way to use this command from a SUD without the messagebox appearing.
Is there a workaround? Does DIAdem 2012 show the same behaviour?
Edit: I guess I was wrong about that Call Execute("Call picdelete") workaround. I'm seeing the same messagebox. I don't know why I thought that helped.
Best regards,
grmume
PS: I'm using DIAdem 2011

Hi grmume
In DIAdem 2012 the behavior is the same. But we have a completely new easy to use object oriented programming interface. There exist a method that reset the modified status of the Report
http://zone.ni.com/reference/en-XX/help/370858K-01/reportapi/methods/report_method_resetmodified_ire...
In former versions you only have the readonly variable PicIsChanged.
But I tried a small script in DIAdem 2011 after changing the layout and it does not ask for saving the layout.
call PicDelete
Call picload("Demo.TDR")
Hope this helps
Winfried

Java works stand alone does not when called from PL/SQL

I have this piece of code, which works as a standalone program: It takes in the en_var and returns a path.
But it wont work when called from a store procedure the line of code p = rt.exec("echo "+envar); returns a path as a standalone program returns null when called from a Oracle store procedure.
Thanks for any help just going around and round in circles.
import java.util.*;
class translate
public static String translatePath(String envar)
Runtime rt = Runtime.getRuntime();
int bufSize = 4096;
byte buffer[] = new byte[bufSize];
String path = null;
Process p = null;
String os = null;
String name = null;
String home = null;
String dir = null;
SecurityManager sm = null;
int len = 0;
try
System.out.println("Calling echo "+envar);
os = System.getProperty("os.name");
name = System.getProperty("user.name");
home = System.getProperty("user.home");
dir = System.getProperty("user.dir");
sm = System.getSecurityManager();
p = rt.exec("echo "+envar);
BufferedInputStream bis = new BufferedInputStream(p.getInputStream());
while ((len = bis.read(buffer, 0, bufSize)) != -1)
System.out.write(buffer, 0, len);
path = new String(buffer);
//p.waitFor();
bis.close();
return path;
catch(Exception e)
System.out.println("Exception "+e);
return "ProcessProblem";
//path = "/rims/live/log";

Still cant get it to work, it doesnt fall over anymore, but when I input $PATH, it will output $PATH instead of the path for $PATH i.e /rims/live: What does your program output please:
Here is my code:
import java.io.*;
import java.util.*;
class translate
     public static String translatePath(String envar)
          Runtime rt = Runtime.getRuntime();
          Process p = null;
          String echoOutput = null;
          int len = 0;
          try
               System.out.println("Calling echo "+envar);
               p = rt.exec(new String[]{"/bin/echo",envar});
               InputStreamReader isr = new InputStreamReader(p.getInputStream());
               BufferedReader br = new BufferedReader(isr);
               echoOutput = br.readLine();
               br.close();
               isr.close();
               return echoOutput;
          catch(Exception e)
               System.out.println("Exception "+e);
               return "ProcessProblem";
          //path = "/rims/live/log";
Thanks for all your help so far.
Tony

HR_INFOTYPE_OPERATION not working when called from Dynamic action

Hi ,
       Senario : I would like to execute a form from dynamic action which
creates a record in 0015 (Additional payment IT) .
       I have writen the code as shown below am using FM HR_INFOTYPE_OPERATION
. When i execute the program from se38 it is creating a record, however it is
not created when it is called from dynamic action..when i debugged the code in
inside the FM HR_INFOTYPE_OPERATION there is a FM HR_MAINTAIN_MASTERDATA where
they are using call dialog (statement) and
sy-oncom = 'N'   when called from Dynamic action and
sy-oncom = 'S'   when called executed directly.
I tried to change the sy-oncom to S while run from Dynamic action it created
the record.
So Can anyone explain me abt sy-oncom and how can i resolve the issue..
code..
REPORT ZHRPYENH01 .
perFORM TERMIATION_9000.
INCLUDE DBPNPMAC.
      FORM Termiation_9000                                          *
FORM TERMIATION_9000.
INFOTYPES : 0015.
*data : i .
*i ='c'.
*break-point.
*message i000(000) with i.
TABLES : PRELP.
DATA : P9000 TYPE PA9000." with header line.
DATA : P0000 TYPE STANDARD TABLE OF P0000 WITH HEADER LINE.
DATA : P0015 TYPE STANDARD TABLE OF P0015 WITH HEADER LINE.
DATA : HIRE_DATE LIKE SY-DATUM,
         TERM_DATE LIKE SY-DATUM.
DATA : MOLGA LIKE T500L-MOLGA VALUE '25',
         SEQNR LIKE PC261-SEQNR.
DATA : RGDIR TYPE STANDARD TABLE OF PC261 WITH HEADER LINE.
DATA : ACTUAL_PERIOD LIKE PA9000-RETENTION.
DATA : PNP-SW-FOUND TYPE SY-SUBRC ,
         PNP-SY-TABIX TYPE SY-TABIX.
DATA : TER_PERNR LIKE PA0001-PERNR.
DATA : REF_PERNR LIKE PA0001-PERNR.
data : key type BAPIPAKEY.
data : payed_amount type p0015-BETRG.
data : future_payment_amount type p0015-BETRG.
data : p0002 like pa0002.
types : begin of t_deduction ,
          deducation_date like p0015-begda,
          future_payment_amount type p0015-BETRG.
types : end of t_deduction.
data : future_deduction type standard table of t_deduction with
*header line.
data : future_deduction type t_deduction .
data : RETURN type BAPIRETURN1.
*data : deduction_p0015 like standard table of p0015 with header line.
data : deduction_p0015 like p0015 .
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
****Prepare 0015 data for deduction
*deduction for payed amount
clear deduction_p0015.
*refresh deduction_p0015.
deduction_p0015-pernr = REF_PERNR.
*deduction_p0015-pernr = TER_PERNR.
deduction_p0015-lgart = 'M120'.
deduction_p0015-begda = sy-datum + 1 .
deduction_p0015-endda = sy-datum + 1 .
deduction_p0015-BETRG = payed_amount.
deduction_p0015-WAERS = 'SGD'.
deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
**deduction for future payment amount
*loop at future_deduction.
*clear deduction_p0015.
*deduction_p0015-pernr = REF_PERNR.
**deduction_p0015-pernr = TER_PERNR.
*deduction_p0015-lgart = 'M120'.
*deduction_p0015-begda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-endda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-BETRG = future_deduction-future_payment_amount.
*deduction_p0015-WAERS = 'SGD'.
*deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
*endloop.
Create a deduction wage type in 0015 for the employee
break-point.
CLEAR RETURN.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
if not return is initial.
message E000(000) with
'Referred Employee could not be locked for referal payment deducation,
please try after some time'.
endif.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    INFTY                  = '0015'
    NUMBER                 = REF_PERNR
   SUBTYPE                = 'M120'
OBJECTID               =
LOCKINDICATOR          =
   VALIDITYEND            = SY-DATUM
   VALIDITYBEGIN          = SY-DATUM
RECORDNUMBER           =
    RECORD                 = deduction_p0015
    OPERATION              = 'COPY'
TCLAS                  = 'A'
   DIALOG_MODE            = '2'
NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = return
   KEY                    = key
break-point.
COMMIT WORK.
if not return is initial.
*return-TYPE
*ID
*NUMBER
*MESSAGE
message I000(000) with return-MESSAGE.
endif.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
Thanks and regards
-Senthil Bala
Message was edited by: senthil bala

Hi Senthil
Why at all U want a subroutine to create a record in IT0015 through Dynamic action.There are some standard codes available to update infotypes.
Let me give U an example
14     9CON     BETRG     4     2     I     INS,0015 This will create a record in IT0015 when IT0014 is updated with Wagetype 9CON
14     9CON     BETRG     4     3     W     P0015-LGART='5400' Set wagetype for IT0015(Here U can use a subroutine call to set the wagetype)
14     9CON     BETRG     4     4     W     P0015-BETRG=P0014-BETRG set amount for IT0015(Here U can use a subroutine call to get the amount)
14     9CON     BETRG     4     5     W     P0015-BEGDA=P0014-ENDDA set the dates(Here U can use a subroutine call to set the dates)
Hope this will help U.
Please award points if helpful

JTextField update problem when called from PropertyChangeEvent

Hi,
I'm trying to create forms that can be dynamically loaded with Class.forname(formName).
Those forms should always inherit some methods that make it easy to pass data to
them and receive data from them. The idea is that the data comes from a table which
sends a hashmap (String column/JTextField-name + String Value pairs) with firePropertyChanged
as soon as a new row is seleceted. The JTextFields in the form are marked with setName("FieldName") that has to correspond to the name of the columns of the table.
My problem is that I can't update the fields in my form when I'm calling getRow(HashMap)
from within propertyChangeEvent but that's necessary to keep the forms flexible.
JTextFieldName.setText(newText) just won't work. But it works when I call getRow(HashMap)
from the constructor. SwingWorker and threads to update the form didn't help.
I don't need to call pack() / update() / repaint() on the JFrame, do I ??
update() / validate() / repaint() etc. didn't work on the JTextField themselves.
Below is the code for one of the test-forms (just a JPanel that is inserted in a frame)
with all of it's methods. Does anybody have a solution to this problem ??
Thanks for taking time for that !!
Benjamin
* testTable.java
* Created on 15. April 2004, 16:12
package viewcontrol.GUI;
* @author gerbarmb
import javax.swing.*;
import java.awt.*;
import java.beans.*;
import java.util.*;
public class testTable extends javax.swing.JPanel
          implements
               java.awt.event.KeyListener,
               java.beans.PropertyChangeListener {
      * public static void main(String[] argv) { testTable tt = new testTable();
      * JFrame jf = new JFrame(); jf.setContentPane(tt); jf.setVisible(true); }
     /** Creates new customizer testTable */
     public testTable() {
          initComponents();
          HashMap hm = new HashMap();
           * Only for debugging, to see that the method getRow() works when
           * called from the constructor.
           hm.put("ttext", "TEst");
           this.getRow(hm);
      * This method is called from within the constructor to initialize the form.
      * WARNING: Do NOT modify this code. The content of this method is always
      * regenerated by the FormEditor.
     private void initComponents() {//GEN-BEGIN:initComponents
          java.awt.GridBagConstraints gridBagConstraints;
          jLabel1 = new javax.swing.JLabel();
          textIn = new javax.swing.JTextField();
          jLabel2 = new javax.swing.JLabel();
          intIn = new javax.swing.JTextField();
          jLabel3 = new javax.swing.JLabel();
          numIn = new javax.swing.JTextField();
          jLabel4 = new javax.swing.JLabel();
          dateIn = new javax.swing.JTextField();
          jLabel5 = new javax.swing.JLabel();
          dateTimeIn = new javax.swing.JTextField();
          jLabel6 = new javax.swing.JLabel();
          jCheckBox1 = new javax.swing.JCheckBox();
          keepValues = new javax.swing.JCheckBox();
          jButton1 = new javax.swing.JButton();
          setLayout(new java.awt.GridBagLayout());
          jLabel1.setText("Text");
          add(jLabel1, new java.awt.GridBagConstraints());
          textIn.setName("ttext");
          textIn.setPreferredSize(new java.awt.Dimension(100, 21));
          textIn.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    textInActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridwidth = 2;
          add(textIn, gridBagConstraints);
          jLabel2.setText("Integer");
          add(jLabel2, new java.awt.GridBagConstraints());
          intIn.setName("tint");
          intIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(intIn, new java.awt.GridBagConstraints());
          jLabel3.setText("Number");
          add(jLabel3, new java.awt.GridBagConstraints());
          numIn.setName("tnum");
          numIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(numIn, new java.awt.GridBagConstraints());
          jLabel4.setText("Date");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 0;
          gridBagConstraints.gridy = 1;
          add(jLabel4, gridBagConstraints);
          dateIn.setName("tdate");
          dateIn.setPreferredSize(new java.awt.Dimension(50, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 1;
          gridBagConstraints.gridy = 1;
          add(dateIn, gridBagConstraints);
          jLabel5.setText("DateTime");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 2;
          gridBagConstraints.gridy = 1;
          add(jLabel5, gridBagConstraints);
          dateTimeIn.setName("tidate");
          dateTimeIn.setPreferredSize(new java.awt.Dimension(80, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(dateTimeIn, gridBagConstraints);
          jLabel6.setText("Bit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jLabel6, gridBagConstraints);
          jCheckBox1.setName("tbit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jCheckBox1, gridBagConstraints);
          keepValues.setText("keep values");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 3;
          add(keepValues, gridBagConstraints);
          jButton1.setText("Send");
          jButton1.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    jButton1ActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 2;
          add(jButton1, gridBagConstraints);
     }//GEN-END:initComponents
     private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_jButton1ActionPerformed
          sendRow();
     }//GEN-LAST:event_jButton1ActionPerformed
     private boolean sendRow() {
          java.util.HashMap hm = new java.util.HashMap();
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (((Component) cs).getName() != null) {
                    if (cs[i] instanceof JCheckBox) {
                         String value = ((JCheckBox) cs[i]).isSelected() ? "1" : "0";
                         hm.put(cs[i].getName(), value);
                    } else if (cs[i] instanceof JCheckBox) {
                         hm.put(cs[i].getName(), ((JTextField) cs[i]).getText());
          } // end for
          firePropertyChange("rowChanged", null, hm);
          return true;
     private void getRow(java.util.HashMap hm) {
          //if (! this.keepValues.isSelected()) {
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (cs[i].getName() != null && hm.containsKey(cs[i].getName())) {
                    Component component = cs[i];
                    String componentName = cs[i].getName();
                    String componentValue = (String) hm.get(component.getName());
                    if (cs[i] instanceof JTextField) {
                         // output for debugging
                         System.out.println("Setting " + cs[i].getName() + " = "
                                   + componentValue);
                         ((JTextField) component).setText(componentValue);
                    } else if (cs[i] instanceof JCheckBox) {
                         // output for debugging
                         System.out.println("JCheckBox found");
                         JCheckBox cb = (JCheckBox) component;
                         boolean selected = (componentValue == null ? false : (componentValue.equals("1")
                                   ? true
                                   : false));
                         ((JCheckBox) component).setSelected(selected);
          } // end for
          /* Uncomment this code snippet to retrieve the text that has been set
          for the components (that means JTextFields)
          This is just for debugging !
          Component[] cs = this.getComponents(); for (int i = 0; i < cs.length;
          i++) { if (cs[i].getName() != null) { if (cs[i] instanceof
          JTextField) { System.out.println("Value of " +cs[i].getName() + " = " +
          ((JTextField) cs[i]).getText()); } } } // end for
     private void textInActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_textInActionPerformed
     }//GEN-LAST:event_textInActionPerformed
     public void keyPressed(java.awt.event.KeyEvent e) {
          if (e.getKeyCode() == java.awt.event.KeyEvent.VK_ENTER) {
               sendRow();
     public void keyReleased(java.awt.event.KeyEvent e) {
     public void keyTyped(java.awt.event.KeyEvent e) {
     public void propertyChange(java.beans.PropertyChangeEvent evt) {
          if (evt.getPropertyName().equals("newRow")) {
               final PropertyChangeEvent finalEvt = evt;
               Runnable makeChanges = new Runnable () {
                    public void run() {
                         getRow((java.util.HashMap) finalEvt.getNewValue());
     // Variables declaration - do not modify//GEN-BEGIN:variables
     private javax.swing.JTextField dateIn;
     private javax.swing.JTextField dateTimeIn;
     private javax.swing.JTextField intIn;
     private javax.swing.JButton jButton1;
     private javax.swing.JCheckBox jCheckBox1;
     private javax.swing.JLabel jLabel1;
     private javax.swing.JLabel jLabel2;
     private javax.swing.JLabel jLabel3;
     private javax.swing.JLabel jLabel4;
     private javax.swing.JLabel jLabel5;
     private javax.swing.JLabel jLabel6;
     private javax.swing.JCheckBox keepValues;
     private javax.swing.JTextField numIn;
     private javax.swing.JTextField textIn;
     // End of variables declaration//GEN-END:variables

The problem of the change in the form not being comitted is that
I forgot SwingUtilities.invokeLater(makeChanges); in the bottom
part in public void propertyChange(java.beans.PropertyChangeEvent evt)
after having created a new Runnable.
Changes to the UI often have to be comitted by SwingUtitlities.invokeLater()
though I don't know that much about Swing yet.
Thanks to everybody who tried to solve that problem.
Benjamin

Advanced table:not able to view more than 10 rows when called from workflow

Hi everyone,
I'm calling a page that contains advanced table and its controller class from two places.
First one is from a inquiry form, when this page is called it works fine. when there are more than 10 rows, first 10 are shown on page render and when we click on Next link, other rows are shown. This is becuase I have given the records displayed property on adavanced table = 10. I'm fine till here.
Second one is I'm calling this page again from a workflow notificaiton. There is a link called view more details on the workflow notification , click of this link will open the page with 10 records displayed. But when user tries to click on Next it doesn't work. It just doesn't refresh.
Its very wierd,. not able to understand what could be wrong when calling from wf notificiton. Its the same page and conroller code used in both the places.
Please help me!!
Thanks
Sunny

Thanks for your response Kristofer. You are correct, there was a difference in the parameters and the issue is resolved now.

Set the default field value to transaction code field, when calling from WD

Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
Sanket

Hi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
          host TYPE string,
          port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well?

Subtemplate footer is not coming when calling from the main template

Hi All,
The footer from the subtemplate is not coming in the output when calling from the main template. Does anybody worked on the subtemplate?
If the same footer is put in the main template, it is displaying.
Please respond as this is a critical issue for us.
Thanks,
Ambadas

Hi Tim,
Thanks for your reply. Here is syntax which I got from the Oracle BI Publisher blog. And this is to just test locally.
http://blogs.oracle.com/xmlpublisher/2006/04/11?import:file:///C:/temp/HeaderFooter.rtf
<?import:file:///d:/test/GEPOPRINT_GER_GER.rtf?>
<?import:file:///d:/test/GEPOPRINT_US.rtf?>
<?for-each@section:G_HEADERS?>
<?if:POH_REPORT_NAME='GER PO w/GERMAN Data'?>
<?call-template:PO_GERMAN?>
<?end if?>
<?if:POH_REPORT_NAME='US Purchase Order'?>
<?call-template:PO_US?>
<?end if?>
<?End for-each?>
And I don't have any footers in the main template but in the subtemplate I have the respective footers. If you want, I can send all the RTF's to you directly.
Let me know.
Thanks,
Ambadas

Query response time takes more time when calling from package

SELECT
/* UTILITIES_PKG.GET_COUNTRY_CODE(E.EMP_ID,E.EMP_NO) COUNTRY_ID */
(SELECT DISTINCT IE.COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID =E.EMP_ID
AND IE.EMP_NO = E.EMP_NO
AND IE.STATUS = 'OPEN' ) COUNTRY_ID
FROM EMPLOYEE E
CREATE OR REPLACE PACKAGE BODY UTILITIES_PKG AS
FUNCTION GET_COUNTRY_CODE(P_EMP_ID IN VARCHAR2, P_EMP_NO IN VARCHAR2)
RETURN VARCHAR2 IS
L_COUNTRY_ID VARCHAR2(25) := '';
BEGIN
SELECT DISTINCT IE.COUNTRY_ID
INTO L_COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID = P_EMP_ID
AND IE.EMP_NO = P_EMP_NO
AND IE.STATUS = 'OPEN';
RETURN L_COUNTRY_ID;
EXCEPTION
WHEN OTHERS THEN
RETURN 'CONT';
END;
END UTILITIES_PKG;
when I run above query its coming in 1.2 seconds.but when comment subquery and call from package its taking 9 seconds.query returns more than 2000 records.i am not able to find the reason why it is taking more time when calling from package?

You are getting a different plan when you run it as PL/SQL most likely. Comment your statement:
SELECT /* your comment here */then find them in V$SQL and get the SQL IDs. You can then use DBMS_XPLAN.DISPLAY_CURSOR to see what is actually happening.
http://www.psoug.org/reference/dbms_xplan.html

ORA-06502 when calling from a procedure

Similar Messages

Maybe you are looking for