ORA-06550 at the MS Can't figure out why?

Greetings,
MDS & MS : IBM RS6000 AIX 4210 Oracle 8044 Multimaster Aync Replication
This is a production box running the MultiMaster Async Setup since 5 years.
All the objects are valid. We have not added or made any changes to the existing setup.
I don't see this quite often, I am not able to recollect happening this before.
I have an open TAR, with very little progress.
No triggers on the HHC_FEATURE table.
Replication is going on with out any problem.
Please also note that MS is a failover site, so no body loggs in except me.
REPADMIN has EXECUTE ANY PROCEDURE privilege
BREP is MS and BHDB is MDS
Any Help,and suggestions will be highly appreciated.
I have the following errors at MS:
DEFERRED_TRA CALLNO FROMDB DestDB STIME ERROR_MSG PACKAGENAME PROCNAME
10.9.16193 0 BHDB BREP 05-04-01 11:42:58 am ORA-06550: line 1, column 28: HHC_FEATURE REP_INSERT
PLS-00302: component 'REP_INS
ERT' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
1 BHDB BREP 05-04-01 11:42:58 am ORA-06550: line 1, column 28: IFAS_DIAL_IN$RP REP_INSERT
PLS-00302: component 'REP_INS
ERT' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
8.16.16236 0 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi HHC_FEATURE REP_INSERT
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BREP
8.16.16236 1 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi IFAS_DIAL_IN$RP REP_INSERT
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BREP
8.16.16236 2 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi HHC_FEATURE REP_INSERT
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BREP
3 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi IFAS_DIAL_IN$RP REP_INSERT
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BRE
8.16.16236 4 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi HHC_FEATURE REP_DELETE
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BREP
5 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi IFAS_DIAL_IN$RP REP_DELETE
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BREP
8.16.16236 6 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi HHC_FEATURE REP_INSERT
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BREP
7 BHDB BREP 05-04-01 11:43:29 am ORA-04060: insufficient privi IFAS_DIAL_IN$RP REP_INSERT
leges to execute stored proce
dure "IFAS.HHC_FEATURE"
ORA-01085: preceding errors i
n deferred rpc to "IFAS.HHC_F
EATURE.REP_INSERT"
ORA-02063: preceding 2 lines
from BREP
Regards & TIA
BN

This is not an easy problem to troubleshoot. I suspect a problem with your setup.
Have you read Doc Id 122664.1 on Metalink?

Similar Messages

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

And I have gone to the support and it was no help

I can't figure out why this page splits in live preview... but not in the browser?

I've finally got my site up and it all runs great... except I can't figure out why this one page behaves like it's too wide.
http://www.johnnez.com/mainbooks.html
It comes apart in the Live Preview.... but not in the browser preview.
Thanks for any tips...
jn

john nez wrote:
HTML is a total incrutable mystery to me... a mystery inside a mystery inside a mystery!
Sounds to me like you've almost cracked it!
You have one error that could cause problems and that's the stray </blockquote> tag. Just delete it.
The alt="" text will show as an error on the validator but that's easy to fix and worth doing.
Here's an easy article on that: http://www.456bereastreet.com/archive/200412/the_alt_and_title_attributes/
In one of your CSS files (JonzheaderindexCSS.css) you have this:
body {
margin-top: 20px;
padding: 0;
color: #666;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
line-height: normal;
background-attachment: fixed;
background-color: #E1B852;
background-image: url(../images/orange%20plaid.jpg);
background-repeat: repeat;
html { overflow-y: scroll; }
It should be like this:
html {
overflow-y: scroll;
body {
margin-top: 20px;
padding: 0;
color: #666;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
line-height: normal;
background-attachment: fixed;
background-color: #E1B852;
background-image: url(../images/orange%20plaid.jpg);
background-repeat: repeat;
It looks like you have that rule repeated further down the page like this:
html { overflow-y: scroll; }
There's an extra curly brace there (}) anyway, so it is badly formed but the whole rule and extra curly brace can go.
You can fix those errors but I have a sneaky suspicion that it isn't gong to solve the issue you describe.
Fix those issues anyway and post back. Maybe if you can show a screen shot of what you are seeing in DW it might help?
Martin
PS: It's never a good idea to have file names on the web that have spaces in. Your background rule has this:
background-image: url(../images/orange%20plaid.jpg);
That .jpg should be orangeplaid.jpg or orangePlaid.jpg or orange_plaid.jpg and the change should be reflected in the reference to the image so, orangePlaid.jpg should be:
background-image: url(../images/orangePlaid.jpg);

I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

What is the problem that you are having ? If you are getting an error message then what does it say ?

[svn] 819: Can't figure out why this broke the build, but reverting it for further investigation

Revision: 819
Author: [email protected]
Date: 2008-03-14 13:51:51 -0700 (Fri, 14 Mar 2008)
Log Message:
Can't figure out why this broke the build, but reverting it for further investigation
Modified Paths:
flex/sdk/trunk/build.xml

Revision: 819
Author: [email protected]
Date: 2008-03-14 13:51:51 -0700 (Fri, 14 Mar 2008)
Log Message:
Can't figure out why this broke the build, but reverting it for further investigation
Modified Paths:
flex/sdk/trunk/build.xml

HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

I tried to Skype someone but I can't see them but they can see me and I can't figure out why?

I tried to Skype somebody and they can see me but I can't see them and I can't figure out why?

I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.

Please help!!! Poor performance Neo2...can't figure out why!!

Hi people,
I have worked on this issue for days!! I cannot figure it out! Here is the problem:
I used to have a Soltek AND Asus A8V mobo (both via chipsets), and scored approx 12,890 in 3dmark03 and 5,100 in 3dmark05, respectively ON BOTH BOARDS!
I have swapped out these boards with the msi neo 2 (latest revison) w/ bios 1.4. I have the SAME other equipment as shown in my signature.
I only get approx 9,800 in 3dmark03 and 3,889 in 3dmark 05. Roughly a 2,000/1,000 point lower difference respectively.
I cannot for the life of me figure out why. I have thought about this for days and searched this and many other forums to no avail.
I have installed the latest nforce 6.14 driver and the forceware 67.02. I have tried other drivers as well, using driver cleaner between installs. Still no go.
Bios is set at optimized default. AGP fast writes disabled. AGP Aperature size 256. The 6800gt is oc'ed to 400/1100. No oc on mobo.
I also did a search and found a review of this board w/ a 3dmark03 bench using the same video card as mine that shows a mark of 15,500 @ resolution 640x480.
So I tried the same test @ resolution 640x480 and scored 2,000 less marks.
I just don't understand this. Can someone please help and try to shed some light on this for me. I am SO perplexed about this!!

Why are you not using the Soltek or Asus A8V anymore?
i have almost the same machine as you and i to am very disappointed with the performance of my setup.
I have also tried other drivers and installing differecnt OS's (win2k, winXPsp1, winXPsp2), which did not seem to help. although drivers did make my benchmarks vary depending on dirver and OS.
I was just about to buy either the soltek 939 pin board or the asus A8V, to see if i can solve my performane issues.
the only other board that looks really good is the gigabyte GA-K8NSNXP-939, but this board also has an nforce3 chipset and i am begining to think that the nforce3 chipset sux.
The only other explanation for the lack of performance or perceived lack of performance is that we are running 64bit CPUs under a 32bit environment and therefore using only half the power of these CPU's.

Apex bug? Items being cleared in session state - can't figure out why

I have an item that is being submitted with a value but is then being overwritten and set to null. I can't see any reason why the submitted value is being overwritten with null.
I have been debugging this problem for most of the day and can't figure out what is happening and was hoping someone in the forum might be able to shed some light.
Some details:
The item is on Page 0, has source type of "PL/SQL Expression or Function", a source expression of "V('REQUEST')", and Source Used = "Always".
I viewed the HTML source of the rendered page and can see the following HTML, so I know the item has a value when the page is rendered:
<input type="hidden" id="RENDER_REQUEST" name="p_t08" value="EDIT" />
I have used Firebug to view the HTTP POST body and can see that p_t08 is being correctly submitted with a value of "EDIT" in the post body.
When I run the page in debug mode and then view the debug log, I see that Apex is indeed setting this item to null:
     0.01500     0.01600     A C C E P T: Request="WIZ_NEXT"
     0.23400     0.00000     Session State: Save form items and p_arg_values
     0.24900     0.01600     ...Session State: Save "BRANCH_TO_PAGE_ID" - saving same value: ""
     0.24900     0.00000     ...Session State: Save "ROWS_PER_PAGE" - saving same value: ""
     0.26500     0.01500     ...Session State: Save "P0_CLEAR_WS" - saving same value: ""
     0.26500     0.00000     ...Session State: Saved Item "RENDER_REQUEST" New Value=""
I can't figure out why the item is being set to null.
This problem also does not occur on every page. The pages in question are a multi-step "wizard" that allows the user to navigate between steps with "Next" and "Previous" buttons. Since this is a page 0 item, it appears on every page in the wizard so I'd expect it to behave the same. When you open the wizard at step 1 and press next to go to step 2, the item (RENDER_REQUEST) is set correctly on step 2 of the wizard, BUT when you then click Next to go to step 3, RENDER_REQUEST is null on step 3. If you open the wizard at step 2 and press Next, RENDER_REQUEST is null on step 3.
I did find a work around, but it doesn't make any sense why it would work: if I move the RENDER_REQUEST item from the "Footer Items" region to a page level item (by using Edit All and setting its region to blank), then the problem goes away. If I move it back to the "Footer Items" region the problem reoccurs.
I am working on Application Express 4.0.2.00.07 on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
Any help would be greatly appreciated!
Thank you.

Hi Patrick,
Thanks for the quick response. Unfortunately, I can't reproduce this on apex.oracle.com due because the app requires PL/SQL packages to be installed in several schemas, including some that require system grants (I gave a presentation at Oracle Open World a couple of years ago on some of the techniques I used in building this application that you attended; I think the session was called "Building Large Commercial Applications with Oracle Database 11g and Oracle Application Express").
Is there another way we can work together to debug this without reproducing it apex.oracle.com? For example, if you could send me an instrumented version of the APEX_040000.F procedure (or whatever procedure is clearing the session state) that has some additional APEX_APPLICATION.DEBUG calls, I could install it on my server, reproduce the error and send you the output.
Thank you,
Eric

Can't figure out why I'm dropping frames during capture

I'm dropping frames when capturing 1-hour Mini DV tapes and I can't figure out why.
I'm capturing on a Mac Pro (Early '08) with 8 GB of memory running FCP 7.0.3 and OS X 10.6.6. I'm capturing to a 4 TB G-Speed eS (eSATA) formatted as RAID 5 (Non-Journaled Extended) with about 750 GB of remaining space. I'm capturing via FireWire with a Canon GL-2. This should be a breeze for this system.
I've run Apple Disk Utility, Disc Warrior 4 and Techtool Pro 5 on the drives and they seem to be fine. I've unplugged all USB and FireWire devices besides the keyboard and mouse. No virus protection or background utilities are running. I've trashed preferences. AJA System Test shows a 286 MB/s write speed and 254 MB/s read speed. Blackmagic Disk Speed Test shows a 312 MB/s write speed and a 379 MB/s read speed. No other applications besides FCP are running. I edit 1080p HD footage on this system all day long with no issues but when I try to capture DV SD footage, I run into issues.
The dropped frames error does not ever occur in the same place on the tapes. The tapes are brand new and don't seem to have any time code issues. The only thing I haven't done is to defragment the hard drives. I wouldn't think that capturing simple DV video would be that demanding; the defragment for a 4 TB RAID would likely take 2 or 3 days.
Any other ideas on what's going on and how to try to fix it? Thanks!

Thanks for the prompt reply, Studio X. Yes, I'm using FireWire Basic and no other FireWire devices. I've switched FireWire cables, although I doubt that's the issue as the cable I was using was brand new and fit snuggly. Unfortunately, I don't have an alternate playback device right now. Would switching to Non-controllable device capture settings be worth a try?

All of a sudden my new iphone will not hold a charge even when it is not being used and I can't figure out why???

my battery drains even when iphone is not being used. It is a relatively new phone and this battery draining just started and I can't figure out why????

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

ORA-06550 at the MS Can't figure out why?

Similar Messages

Maybe you are looking for