ORA-06550 Error when Assinging values in APEX

Hi I am running this query it runs fine in SQL developer but when I put this in a string in APEX return me error where the case staement returning values, Could you please help me in this regard
declare
l_query varchar2(4000) := '' ;
begin
l_query := 'select
a.TIMESHEET_ID, b.LAST_NAME || '', '' || b.FIRST_NAME NAME,
to_char(a.DAY_START,'dd/mm/yyyy hh24:mi') DAY_START,
to_char(a.DAY_END,'dd/mm/yyyy hh24:mi') DAY_END,
a.BREAK_IN_HOURS, round(a.TOTAL_WORK_HOURS,2) TOTAL_WORK_HOURS,
c.DESCRIPTION Timesheet_Status,
nvl((select sum(x.duration_hours) from eba_timesheet_detail x where a.timesheet_id = x.timesheet_id) ,0) detail_hours,
case when round(a.TOTAL_WORK_HOURS,2) != (nvl((select sum(x.duration_hours) from eba_timesheet_detail x where a.timesheet_id = x.timesheet_id) ,0))
then 'YES' else 'NO'
end as inconsistent
from EBA_TIMESHEET_HDR a, EBA_TIMESHEET_USERS b, EBA_TIMESHEET_STATUS c
where a.USER_ID = b.ID and a.TIMESHEET_STATUS_ID = c.ID ';

Hi,
The ORA-06550 is error points to the location in the PL/SQL where the syntax error
occurred and it is followed by a more descriptive message of the compile-time error:So can you give us the entire error description...?
Or try below given script
DECLARE
   l_query   VARCHAR2 (4000) := '';
BEGIN
   l_query :=
      'SELECT a.timesheet_id, b.last_name || '', '' || b.first_name NAME,
       TO_CHAR (a.day_start, ''dd/mm/yyyy hh24:mi'') day_start,
       TO_CHAR (a.day_end, ''dd/mm/yyyy hh24:mi'') day_end, a.break_in_hours,
       ROUND (a.total_work_hours, 2) total_work_hours,
       c.description timesheet_status,
       NVL ((SELECT SUM (x.duration_hours)
               FROM eba_timesheet_detail x
              WHERE a.timesheet_id = x.timesheet_id), 0) detail_hours,
       CASE
          WHEN ROUND (a.total_work_hours, 2) !=
                 (NVL ((SELECT SUM (x.duration_hours)
                          FROM eba_timesheet_detail x
                         WHERE a.timesheet_id = x.timesheet_id), 0)
             THEN ''YES''
          ELSE ''NO''
       END AS inconsistent
  FROM eba_timesheet_hdr a, eba_timesheet_users b, eba_timesheet_status c
WHERE a.user_id = b.ID AND a.timesheet_status_id = c.ID';
END;*009*
Edited by: 009 on Apr 8, 2010 9:28 PM

Similar Messages

  • ORA-01555 error when assigning values based on geometry

    Hello,
    I have a table with 220,000+ records with street information, and I am trying to assign a municipal area (stored in another table) based on the geometry of the road line and the geometry of the municipal boundary.
    CREATE TABLE TEMP AS SELECT A.ID, B.AREA FROM ROADS A, PLACES B WHERE B.TYPE IN (33,35,36,37) AND mdsys.sdo_relate (a.geometry,b.geometry,'
    mask=inside querytype = window')='TRUE';
    This took a long time to run and it came back with a series of errors, one of which was ORA--01555 'snapshot too old'. I was running other queries on the table (in a separate SQL window) because I'm under a deadline, so i figured that doing multiple things at one time while the spatial query was running was causing the problem. I didn't have time to run it again (it was the end of the day when the error came up, conveniently) so I am trying to work out a solution to this issue.
    Would it be better if I: a) ran the statement again on the whole dataset and did nothing else while it is running, even though it will still take a while, or
    b) broke it up into groups of 50,000 records and run the statement on one group at a time and hope for the best.
    Thanks in advance!

    Assuming you have less municipal areas than roads, the query should perform better by specifying the join order:
    CREATE TABLE TEMP AS (
         SELECT /*+ ORDERED */ A.ID, B.AREA
         FROM PLACES B, ROADS A
         WHERE B.TYPE IN (33,35,36,37)
         AND mdsys.sdo_relate (a.geometry, b.geometry,'mask=inside querytype = window') = 'TRUE');Also, are you sure 'inside' is the right mask to use here? What if a road intersects the edge of the municipality? In that case it wouldn't be returned by this query.

  • ORA-20001:Error fetching column value:Query must  begin with SELECT or WITH

    Hi all,
    I have implemented an application with a master-detail form using Apex 3.1.2 and I imported that to Apex 3.2 on different server. Everything else seems to be fine except when I add detail record (clicking on Add Rows), I am getting following error.
    =================
    report error:
    ORA-20001: Error fetching column value: ORA-20001: Query must begin with SELECT or WITH
    ====================
    Both the databases have same version 10gR2. I didn't make any change after importing it as well. Can someone let me know what could be the issue? Thanks in advance.
    SHY

    May we know your first name?
    Can you put the application in your workspace on apex.oracle.com so we can take a look?
    Scott

  • Classic Report - report error:ORA-20001: Error fetching column value

    Hi,
    In Apex 4 I have created an SQL report which errors with ORA-20001: Error fetching column value: ORA-01403: no data found.
    It works fine if I hard code the start and end dates but fails when I use page items as parameters.
    I call a stored function as below:
    DECLARE
    l_sql VARCHAR2(4000);
    BEGIN
    SELECT ICDB_PCT_MRSA_POS_REP(v('P40_NEWSTARTDATE'),
    v('P40_NEWENDDATE'))
    INTO l_sql
    FROM dual;
    RETURN(l_sql);
    END;
    although I have used the :P40_NEWSTARTDATE form too, with the same result.
    Any suggestions will be welcome.
    Thanks,
    Chris

    Hi Chris,
    have you debugged if ICDB_PCT_MRSA_POS_REP is raising the no-data-found error or if it's the actual SQL statement which got returned?
    Comment out the call to ICDB_PCT_MRSA_POS_REP and return a hard coded SQL statement with
    return 'select [... here comes a sample sql statement returned by ICDB_PCT_MRSA_POS_REP]';to rule out that ICDB_PCT_MRSA_POS_REP is raising the error.
    BTW what is the purpose of the select from dual? Just call the ICDB_PCT_MRSA_POS_REP directly like
    return ICDB_PCT_MRSA_POS_REP(:P40_NEWSTARTDATE, :P40_NEWENDDATE);Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

  • Report error: ORA-20001: Error fetching column value

    Hi,
    I try to build a tabular form with 1 column as "Select List (Query based on LOV)". This select list should display round about 1.100 rows in the LOV ordered by name. So I got the error: report error:
    ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numerischer oder Wertefehler: character string buffer too small
    When I try tho define this column as Popup LOV (Query based LOV) only the the ID of the attribute and not the display value appeares in the row. The LOV it self displays the display number and not the the ID. I want to see the display value in the column of the particular row and the LOV and return the ID to the record by insert or update as it is normal in LOVs of form regions.
    This lot of rows in the LOV is necessary because it is a part to develop formulas like (number_of_acquisitions - number_of_old_parts)/100 or so. The most formulas will be more complex. In the database there should only be the ID as reference to the attributes.
    Please help me to display the attribute bases on LOV in every particular row.
    Thank you
    Siegwin

    In Apex 4 there is now a column type "Popup Key LOV (named LOV)" which is exactly what you are looking for.
    Edited by: 964978 on Oct 12, 2012 4:53 AM

  • ORA-0907 error when querying XMLDB Table using XMLExists

    Hi All,
    Get ORA-00907 error when trying to use XMLExists:
    SELECT *
    FROM tnmab_agreement_xml_binary A
    WHERE
    ( XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/ShippingPartyGroups/ShippingParties/CustomerHolder[SAP_ID="$ARG"]')
    passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")
    OR
    ( XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/NamedCustomerGroups/NamedCustomer/SAP_IDs/StringWrappers[Value="$ARG"]')
    passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")
    ORA-00907: missing right parenthesis
    *00907. 00000 - "missing right parenthesis"*
    **Cause:*
    **Action:*
    Error at Line: 6 Column: 176
    Any help is appreciated
    Thanks
    Auro

    XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/ShippingPartyGroups/ShippingParties/CustomerHolder[SAP_ID="$ARG"]'
    passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")no ')' after the closing quote

  • ORA-03115 error when calling a Stored Procedure

    Hi All,
    I'm in the process of porting a Pro/C app from NT to Linux. I've installed 8.1.5 on our Linux box and patched it up to 8.1.5.02.
    It all kind of works ok, except that I'm sometimes getting ORA-03115 errors when the app calls a stored procedure. The call in question looks like this:
    EXEC SQL BEGIN DECLARE SECTION;
    VARCHAR resprows[50][3998];
    int numret = 0;
    int numrows= 50;
    int done= 0;
    unsigned long resp_id = 0;
    EXEC SQL END DECLARE SECTION;
    EXEC SQL AT DB_NAME EXECUTE
    BEGIN pkg_something.getdata(
    :resp_id, /* IN */
    :numrows, /* IN */
    :done, /* OUT */
    :resprows, /* OUT */
    :numret /* OUT */
    END;
    END-EXEC;
    The stored procedure basically uses the resp_id value to select rows from a table;
    in each row there is a VARCHAR2(4000) column which it copies into the hostarray resprows.
    There may be anything from 1 to numrows returned from the SP.
    Initially, the resprows rows were defined to be size [4000]. Unfortunately, this caused ORA-02005 errors - I then changed the size to [3998], which seemed to fix the 02005's (although I'm unclear as to the reasons why).
    Now I'm getting the 03115 errors when calling the SP. The oracle manual is not very helpful on what this error means.
    This all works chipper on NT.
    Any ideas?
    Thanks in advance,
    Nigel.
    PS: The database the app is talking to is still hosted on NT.
    null

    Histon FTM wrote:
    ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
    >
    The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
    And just checking:
    You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
    Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

  • ORA-04062 error when running forms with different users

    ORA-04062 error when running forms with different users
    I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
    I wrote a stored procedure to get the data from other user's tables.
    When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
    I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
    My Forms version is 6i with Patch 15.
    Database version is 9.
    Here is my stored procedure:
    TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
    TYPE Open_Curs IS REF CURSOR;
    PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
    Curs Open_Curs;
    i NUMBER;
    BEGIN
    OPEN Curs FOR
    'SELECT Seq_No FROM '|| User_Name ||'.scenario';
    i := 1;
    LOOP
    FETCH Curs INTO Scen_Table(i);
    EXIT WHEN Curs%NOTFOUND;
    i := i + 1;
    END LOOP;
    END Get_Senarios;
    I would be happy to solve this problem. It's really important.
    Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

    I think it should be a better solution to create a package,
    and put your own TYPES and procedure into it.
    CREATE OR REPLACE PACKAGE PKG_XXX IS
    TYPE TYP_TAB_CHAR IS TABLE OF .... ;
    PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
    END ;
    Then in your Form :
    Declare
    var PKG_XXX.TYP_TAB_CHAR ;
    Begin
    PKG_XXX.P_XX( 'user_name', var ) ;
    End ;

  • ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value

    I have an application made in devlopment which is working fine and i jsut migrated it to production but when i am running one of the page in the app in production it si throwing this error "ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too small"... this report is ment for generating report.
    Now what i have done, i compared both dev and prod environment but i have not found and changes except this one. In the page of both the application in dev and prod under shared component under under template the region of breadcrum and report region is showing in different position. i dont think it a problem because of that i am facing problem.
    If anybody have idea how could i recitfy the prbs i will be highly thankful to you
    Regards
    Adi

    friends i have seen where the error is coming but i am unable to trace out how to increase the size of lov which i have made.
    when i am taking display as select list(named lov) it is throwing me the error "ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too small" but if i am taking display as "popup lov(named lov)" under tablular form element under one of the column in the report, it is working properly. but not shwoing the report the way we want it to show. For that reason i want to increase the size of the love which i have made.

  • ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

    I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
    when browsed through some of the messages they point to setting Oracle Wallet Manager.
    I am trying to connect
    Any idea on how to resolve this issue ?
    your input is appreciated.
    Thanks
    Ravi

    Duplicate post ... please ignore.

  • ORA-00054 error when loading Oracle table using Data Services

    Hello,
    we are facing ORA-00054 error when loading Oracle table using BO Data services
    (Oracle 10g database, BODS Xi 3.2 SP3)
    Test Job performs
    1- truncate table
    2- load table (tested in standard and bulk load modes)
    Scenario when issue happens is:
    1- Run loading Job
    2- Job end in error for any Oracle data base error
    3- When re-running the same Job, Job fails with following error
         ORA-00054: resource busy and acquire with NOWAIT specified
    It seems after first failure, Oracle session for loading the table stays active and locks the table.
    To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
    Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
    Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
    Thanks in advance
    Paul-Marie

    the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
    Or
           AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
    This Problem Occurs when we select The Bulkloading Option in orclae  We also faced the same issue,Our admin has Killed the session. Then everything alright.

  • Why am I getting an ORA-04052 error when I try to compile a Procedure?

    Hi,
    The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
    CREATE OR REPLACE PROCEDURE APPS.Find_String (
    pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
    IS
    cursor cur_get_dependancy
    is
    SELECT distinct owner, name, type
      FROM [email protected]        -- prod.world
    WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
       AND referenced_type <> 'SYNONYM'
       AND owner <> 'SYS'
    order by name;
    v_owner  varchar2(40);
    v_name   varchar2(50);
    v_type   varchar2(40);
        BEGIN
           dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
           dbms_output.put_line(' ');
           dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
           dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
            FOR i IN cur_get_dependancy
            LOOP
                v_owner := RPAD(i.owner, 30, ' ');
                v_name  := RPAD(i.name, 45, ' ');
                v_type  := RPAD(i.type, 30, ' ');
                dbms_output.put_line(v_owner ||v_name|| v_type);
            END LOOP;
    END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
    What's even stranger is that I took the SELECT statement
    SELECT distinct owner, name, type
      FROM [email protected]        -- prod.world
    WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
       AND referenced_type <> 'SYNONYM'
       AND owner <> 'SYS'
    order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
    ORA-04052: error occurred when looking up remote object [email protected]
    ORA-00604: error occurred at recursive SQL level 1
    ORA-02068: following severe error from PINP
    ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?

    OK Justin,
    Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
    By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
    SQL> conn apps/apps1@dev1
    Connected.
    SQL> SELECT distinct owner, name, type
      2    FROM [email protected]
      3   WHERE lower(referenced_name) = lower('ALL_USERS')
      4     AND referenced_type <> 'SYNONYM'
      5     AND owner <> 'SYS'
      6   order by name;
    OWNER                          NAME                           TYPE
    PUBLIC                         ALL_USERS                      SYNONYM
    XDB                            DBMS_XDBUTIL_INT               PACKAGE BODY
    XDB                            DBMS_XDBZ0                     PACKAGE BODY
    SYSTEM                         MVIEW_EVALUATIONS              VIEW
    SYSTEM                         MVIEW_EXCEPTIONS               VIEW
    SYSTEM                         MVIEW_FILTER                   VIEW
    SYSTEM                         MVIEW_LOG                      VIEW
    SYSTEM                         MVIEW_RECOMMENDATIONS          VIEW
    SYSTEM                         MVIEW_WORKLOAD                 VIEW
    ORASSO                         WWCTX_API                      PACKAGE BODY
    PORTAL                         WWCTX_API                      PACKAGE BODY
    ORASSO                         WWEXP_UTL                      PACKAGE BODY
    PORTAL                         WWEXP_UTL                      PACKAGE BODY
    PORTAL                         WWPOB_API_PAGE                 PACKAGE BODY
    PORTAL                         WWPOF                          PACKAGE BODY
    ORASSO                         WWPRO_PROVIDER_VALIDATION      PACKAGE BODY
    PORTAL                         WWPRO_PROVIDER_VALIDATION      PACKAGE BODY
    PORTAL                         WWSBR_EDIT_ATTRIBUTE           PACKAGE BODY
    PORTAL                         WWSBR_FOLDER_PORTLET           PACKAGE BODY
    PORTAL                         WWSBR_USER_PAGES_PORTLET       PACKAGE BODY
    ORASSO                         WWUTL_API_PARSE                PACKAGE BODY
    OWNER                          NAME                           TYPE
    PORTAL                         WWUTL_API_PARSE                PACKAGE BODY
    PORTAL                         WWUTL_EXPORT_IMPORT_LOV        PACKAGE BODY
    ORASSO                         WWUTL_LOV                      PACKAGE BODY
    PORTAL                         WWUTL_LOV                      PACKAGE BODY
    PORTAL                         WWV_CONTEXT                    PACKAGE BODY
    PORTAL                         WWV_CONTEXT_UTIL               PACKAGE BODY
    PORTAL                         WWV_DDL                        PACKAGE BODY
    PORTAL                         WWV_GENERATE_UTL               PACKAGE BODY
    PORTAL                         WWV_GLOBAL                     PACKAGE
    PORTAL                         WWV_MONITOR_DATABASE           PACKAGE BODY
    PORTAL                         WWV_PARSE_AS_SPECIFIC_USER     PACKAGE BODY
    PORTAL                         WWV_PARSE_AS_USER              PACKAGE BODY
    PORTAL                         WWV_SYS_DML                    PACKAGE BODY
    PORTAL                         WWV_SYS_RENDER_HIERARCHY       PACKAGE BODY
    PORTAL                         WWV_THINGSAVE                  PACKAGE BODY
    PORTAL                         WWV_UTIL                       PACKAGE BODY
    PORTAL                         WWV_UTLVALID                   PACKAGE BODY
    38 rows selected.
    SQL>Let me know what you think.
    Thanks again.

  • Report suddenly showing ORA-20001: Error fetching column value: ORA-06502:

    Hi,
    Some reports in my applications are suddenly showing:
    ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    instead iof the data they used to show.
    In my development system I can fix this by:
    1. changing the column alias in my sql
    select 'a' alias1 from dual becomes
    select 'a' alias2 from dual
    2. SAVE CHANGES
    3. change column alias back to original
    select 'a' alias2 from dual becomes
    select 'a' alias1 from dual
    4. reorder columns back to original in the 'report attributes' tab
    alias1 is now at the bottom of my colum list - i just bounce it up to column 4 using the up arrows
    5. SAVE CHANGES
    then everything starts working OK again.
    There seems to be nothing wrong with my sql as I can make it works on a new page or after I run the above steps, so I guess something is breaking somewhere but I cannot work out what.
    Has anyone else seen this? Does anyone know the cause? Does anyone have a fix for this that does not involve the above steps (plus redeployment to prodcution and all the work that involves)?
    I am seeing this on version 2.3 and 3.0.
    Thanks,
    Martin

    Hi Scott,
    I think this is want you want (sorry it's not easy to read):
    wp.suite_id - Database Column NUMBER - Report Column Based on LOV
    wp.project_id - Database Column NUMBER - Report Column Based on LOV
    wp.application_order wp_order - Database Column NUMBER - Report Column Standard
    lpad(wp.work_package_id,5,'0')||' - '||wp.name wp_name - Database Column NUMBER/VARCHAR2 - Report Column Standard
    pt.application_order pt_order - Database Column NUMBER - Report Column Standard
    pt.name pt_name - Database Column VARCHAR2 - Report Column Standard
    substr(pt.description,1,30) description - Database Column VARCHAR2 - Report Column Standard
    pt.application_tier - Database Column VARCHAR2 - Report Column Based on LOV
    pt.application_method - Database Column VARCHAR2 - Report Column Based on LOV
    pt.TECH_LEAD_ID - Database Column NUMBER - Report Column Based on LOV
    This report has no link columns and no derived columns.
    Regards,
    Martin

  • ORA-22813 error when deleting spatial objects in LIVE

    Hi,
    We are getting an ORA-22813 error when attempting to delete a spatial object from a version-enabled table in workspace LIVE. The spatial object to be removed has a SDO type of multipolygon. The geometry information consists of 4 rings with a combined ordinate count of 4120. The statement used to delete the row is:
    delete from tableA where tableA.id in (select tableA.id from tableA where tableA.id = 3);
    The error occurs only on a 10g R1 Oracle instance (10.1.0.5.0) with Workspace Manager version 10.1.0.7.1. The delete operation succeeds without problems on a 10g R2 (10.2.0.2.0) instance with Workspace Manager version 10.2.0.3.1. The statement is also executed successfully on the 10g R1 instance if the table is not version-enabled.
    Any help on this would be appreciated.
    Thanks

    Hi,
    I would recommend filing a TAR in this one. The only ora-22813 error involving workspace manager and geometry columns that I know about involves queries that need to sort data for which the size of the geometry column was >30k. Does the execution plan for the delete statement involve any kind of sort? However, this is an old 9.2 bug, that I believe was fixed for all 10.1 and newer releases.
    Does the same error happen if you do not use the subquery?
    Regards,
    Ben

  • ORA-01031 Error When starting Database

    I have installed Oracle 11gr2 on my laptop having OS ubuntu 10.04, after installation i am receiving ORA-01031 error when try to log in with the command
    sqlplus / as sysdba what should i do to resolve it...

    Hi,
    there are a lot of possibilities why this can be wrong. Look at Oracle Support for note 233223.1, "Checklist for Resolving CONNECT AS SYSDBA (INTERNAL) Issues". This gives links to notes which leads you to maybe the solution.
    Possibilities are:
    - you are root, which is not allowed. You should connect with the oracle user
    - your user is not part of the dba group
    - permissions on files
    - and many more
    Herald ten Dam
    http://htendam.wordpress.com

Maybe you are looking for

  • What's wrong with my code?(about RSDRI_INFOPROV_READ)

    The result is print out this line in the screen: '11 305 DBMAN   ZUTI_USA' My code is: *& Report  ZREADDSO REPORT  ZREADDSO. TYPE-POOLS: rs, rsdrc. types:       begin of TResult,           i_zgultima         type  /BIC/OIZGULTIMA,           i_zusagei

  • PNG files don't work after iOS 7 update on iPad and iPhone

    I have several PNG files stored on my CC account but when I start a new photoshop touch project and try to add the PNG it downloads as a blank image. The dotted outline is there but the image is blank. It used to work before iOS 7 and now it does not

  • Question about the Query Optimizer

    For an Excercise during my database lecture the following table CREATE TABLE TASKS     "ID" NUMBER NOT NULL ENABLE,     "START_DATE" DATE,     "END_DATE" DATE,     "DESCRIPTION" VARCHAR2(50 BYTE) ) ;with about 1.5 Million Entries were given. In addit

  • Customer Master Partner Functions - Load issue

    As part of Main Customer loads (Soldd-to), we loaded all the Customers. Partner Functions - pointing to same Customer Number - were created for all the Customers. Our second step was to create Partners for the sold-to. When we load Partners, they are

  • Parse integration into Xcode app

    Hi guys. I'm getting 4 errors when i try to integrate parse into my appdeletage.m code. I copied everything correctly from parse SDK and added all of the necessary frameworks. and I'm still getting these 4 errors. Says something about "unidentified s