ORA-1031 Insufficient Privilege on RHEL5 / EBS12.1 Single Node Installation
Hi,
I am new to EBS
I installed EBS R 12.1 for testing purpose on RHEL5,
i made one user oracle which owns the file system + db under group oinstall, it has been granted privilages on file system. e
Everything is working fine except one.
Whenever i try to connect as sys as sysdba or / as sysdba or sys/oracle@VIS as sysdba, i m getting ORA-1031 insufficient privilage error, i can connect locally using system/oracle, but when i try to shutdown database again i recieve same ORA-1031 ERROR.
My problem is that i don't have metalink account so i cannot access documents regarding this issue, can anybody help me here,
I cannot access Note: 730067.1 - Troubleshooting ORA-1031 Insufficient Privilege because i don't have metalink account.
If anyone can help me here or can give me any other link so i can download this doc.....
regards,
Farhat
Hi,
Whenever i try to connect as sys as sysdba or / as sysdba or sys/oracle@VIS as sysdba, i m getting ORA-1031 insufficient privilage error, i can connect locally using system/oracle, but when i try to shutdown database again i recieve same ORA-1031 ERROR.Do you source the database env file before connect to SQL*Plus as sysdba user?
Also, make sure that the dba group is the primary group of oracle user.
My problem is that i don't have metalink account so i cannot access documents regarding this issue, can anybody help me here,
I cannot access Note: 730067.1 - Troubleshooting ORA-1031 Insufficient Privilege because i don't have metalink account.
If anyone can help me here or can give me any other link so i can download this doc.....There is no other link available, and posting the contents on MOS/Metalink docs violates Oracle support agreement policy.
Thanks,
Hussein
Similar Messages
-
ORA-1031 insufficient privileges.
Hi All,
I have a window 2000 service pack 4 machine.
I have Oracle 9.2.0.7 running.
I am logging into the amchine as Administrator User who is a member of ORA_DBA group.
when I tried to do the following operation ..
sqlplus /nolog
connect / as sysdba
I am getting ..
ORA-01031: insufficient privileges
does somebody have any ideas how to resolve this?
Any help is much appreciated.
regards,
SujeethCheck the Oracle_home\network\admin\sqlnet.ora have this entry
SQLNET.AUTHENTICATION_SERVICES = (NTS)
and what is the value in parameter file for ' remote_login_passwordfile ' .
Regds,
Thomas. -
Hi,
I am using Visual Studio 2003. I am creating a ASP.NET Web Application NOT Windows Application.
I logged into Oracle as a DBA, but I got this message.
I wasn't sure if I missed anything when working on the Web.
Thanks for your help.
LuanHi Chris,
Thank you so much for your help.
Yes, I use oracle explorer. Sorry, the code is kind of long. Here is the code:
using System;
using System.Collections;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Web;
using System.Web.SessionState;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.HtmlControls;
namespace WebBank
/// <summary>
/// Summary description for WebForm1.
/// </summary>
public class WebForm1 : System.Web.UI.Page
protected Oracle.DataAccess.Client.OracleDataAdapter oracleDataAdapter1;
protected Oracle.DataAccess.Client.OracleCommand oracleCommand1;
protected Oracle.DataAccess.Client.OracleConnection oracleConnection1;
protected System.Web.UI.WebControls.Button btnOK;
protected System.Web.UI.WebControls.DataGrid DataGrid1;
private void Page_Load(object sender, System.EventArgs e)
// Put user code to initialize the page here
//DataSet ds = new DataSet();
//oracleDataAdapter1.Fill(ds);
//DataGrid1.DataSource = ds.Tables[0];
#region Web Form Designer generated code
override protected void OnInit(EventArgs e)
// CODEGEN: This call is required by the ASP.NET Web Form Designer.
InitializeComponent();
base.OnInit(e);
DataSet ds = new DataSet();
oracleDataAdapter1.Fill(ds);
DataGrid1.DataSource = ds.Tables[0];
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
this.oracleDataAdapter1 = new Oracle.DataAccess.Client.OracleDataAdapter();
this.oracleCommand1 = new Oracle.DataAccess.Client.OracleCommand();
this.oracleConnection1 = new Oracle.DataAccess.Client.OracleConnection();
// oracleDataAdapter1
this.oracleDataAdapter1.SelectCommand = this.oracleCommand1;
this.oracleDataAdapter1.RowUpdated += new Oracle.DataAccess.Client.OracleRowUpdatedEventHandler(this.oracleDataAdapter1_RowUpdated);
// oracleCommand1
this.oracleCommand1.CommandText = "SELECT * FROM SYSTEM.CUSTOMER";
this.oracleCommand1.Connection = this.oracleConnection1;
// oracleConnection1
this.oracleConnection1.ConnectionString = "User Id=system;Data Source=TESTDB;Password=passwd;Persist Security Info=true;";
this.oracleConnection1.InfoMessage += new Oracle.DataAccess.Client.OracleInfoMessageEventHandler(this.oracleConnection1_InfoMessage);
this.btnOK.Click += new System.EventHandler(this.btnOK_Click);
this.Load += new System.EventHandler(this.Page_Load);
#endregion
private void oracleConnection1_InfoMessage(object sender, Oracle.DataAccess.Client.OracleInfoMessageEventArgs eventArgs)
private void oracleDataAdapter1_RowUpdated(object sender, Oracle.DataAccess.Client.OracleRowUpdatedEventArgs e)
private void btnOK_Click(object sender, System.EventArgs e)
DataSet ds = new DataSet();
oracleDataAdapter1.Fill(ds);
DataGrid1.DataSource = ds.Tables[0]; -
Resolving problem with ORA-01031: insufficient privileges
hello i just to write a few word about my installation of oracle database 9i
My installation is on a Red Hat AS3
I have a problem with the error :ORA-01031: insufficient privileges
The one who read this know what about i tell.
The authorization is only for the user which Group is DBA as you can read everywhere.
but me when i tried groupadd dba => it tells group already exist.
but i can't find the group dba in the file /etc/group.
So i tried to make my user 'oracle' works with the 'already group exist' dba .
useradd -g dba oracle
but when i tried to start the database i create i have the message. : ORA-01031: insufficient privileges
i tried to add manualy the group dba to /etc/group (as i can read in websites)
and add a user manualy (/etc/passwd).
But does works.
I try all i can during 1 days long.
I was really upset because nothing that i read work.
finaly I go to the RedHat Menu (things i don't really do normaly on LINUX) and go to 'SYSTEM SETTINGS' and choose 'User and Group'
Here i can see my user 'Oracle' I get the property of the user .
there is a tab group ( 'select the group that the user will be member of:')
None of them where name DBA so i decidied to select all of them and tried.
MAGIC!!! then it works!!!
ps: after when i see the list of the group I saw that one of them is named 'SYS' . I really think that it is the one group i had to select. but don't know.
Now It is working for me so... And good luck for you. bye.Errors
ORA-01031 "insufficient privileges"
Symptoms
During database upgrade phase using DBUA , it fails with error
ORA-1031 Insufficient privileges
Connection from sqlplus also fails with same error
$ sqlplus /nolog
SQLPLUS "conn / as sysdba"
ORA-1031 Insufficient privileges
Changing the REMOTE_LOGIN_PASSWORDFILE to SHARED / NONE does not make differen
Cause
ORACLE_HOME owner oramigts is part of OS group "dba" ,but config.s shows group "g680"
The 'OSDBA' and 'OSOPER' groups are chosen at installation time and usually both default to the group 'dba'.
These groups are compiled into the 'oracle' executable and so are the same for all databases running from a given ORACLE_HOME directory.
The actual groups being used for OSDBA and OSOPER can be checked thus:
cd $ORACLE_HOME/rdbms/lib
cat config.[cs]
Solution
To implement the solution, please execute the following steps:
1. Checked the ORACLE_HOME owner.
echo $ORACLE_HOME
/h02/app/oracle/product/9.2.0_64
cd / h02/app/oracle/product/
ls -l
drwxr-xr-x 58 oramigts dba 1024 Jan 2 2004 9.2.0_64
2.ORACLE_HOME software owner "oramigts" is part of group "dba"
3.Checked file $ORACLE_HOME/rdbms/lib/config.s
[If your platform has config.c:
Due to the way different compilers under different architectures generate
assembler code, it's not possible to give a universal rule.]
It shows dba group as "g680" where software owner is part of "dba" group
You can more find detail on config.s / config.c in the following doc.
Note 50507.1 SYSDBA and SYSOPER Privileges in Oracle
4. Modified the config.s for correct group.
.ascii "g680\0"
to
.ascii "dba\0"
7. mv config.o config.o.bak
8. make -f ins_rdbms.mk config.o ioracle
9. Checked the file config.o is created at $ORACLE_HOME/rdbms/lib
10. Connected / as sysdba thru Sqlplus from 9.2 Home, which connected sucessfully. -
SQL connect /as sysdba; ERROR: ORA-01031: insufficient privileges
wondering what could be the case, OS Solaris10
SQL*Plus: Release 10.2.0.3.0 - Production on Thu Sep 11 13:36:17 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
SQL> connect /as sysdba;
ERROR:
ORA-01031: insufficient privileges
i have orapwd also setup &
SQL> connect sys/******** as sysdba;
Connected.
SQL> show parameter remote
NAME TYPE VALUE
remote_archive_enable string true
remote_dependencies_mode string TIMESTAMP
remote_listener string
remote_login_passwordfile string EXCLUSIVE
remote_os_authent boolean FALSE
remote_os_roles boolean FALSE
Oracle 10.2.0.3: id -a oracle
uid=101(oracle) gid=101(dba) groups=101(dba)Hi DBA2008,
Please refer to this Metalink Notes:
- Troubleshooting ORA-1031 Insufficient Privilege While Authentication Note [730067.1|https://metalink.oracle.com/metalink/plsql/f?p=130:14:3634364694467571378::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,730067.1,1,1,1,helvetica]
- UNIX: Checklist for Resolving Connect AS SYSDBA Issues Note [69642.1|https://metalink.oracle.com/metalink/plsql/f?p=130:14:3634364694467571378::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,730067.1,1,1,1,helvetica]
- UNIX:Connect Internal asks for password when TWO_TASK is set Note [1066589.6|https://metalink.oracle.com/metalink/plsql/f?p=130:14:3634364694467571378::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,1066589.6,1,0,1,helvetica]
Regards,
Francisco Munoz Alvarez
www.oraclenz.com -
Logical standby: ORA-01031: insufficient privileges
Dear Colleagues,
Today in my Logical Standby don't apply archivelogs and I see an error in alert.log:
ORA-26808: Apply process AS01 died unexpectedly.
ORA-01031: insufficient privileges
Also I see next logs in trace files:
h4.
1)
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /ora/Ora11203
System name: Linux
Node name: base
Release: 2.6.18-308.20.1.el5
Version: #1 SMP Tue Nov 6 04:38:29 EST 2012
Machine: x86_64
Instance name: oracle
Redo thread mounted by this instance: 1
Oracle process number: 43
Unix process pid: 16634, image: oracle@base (AS01)
*** 2013-04-04 16:58:47.062
*** SESSION ID:(146.16811) 2013-04-04 16:58:47.062
*** CLIENT ID:() 2013-04-04 16:58:47.062
*** SERVICE NAME:(SYS$USERS) 2013-04-04 16:58:47.062
*** MODULE NAME:(Streams) 2013-04-04 16:58:47.062
*** ACTION NAME:( - Apply Server) 2013-04-04 16:58:47.062
knasplcr: eager error was not rolled back
++ LCR Dump Begin: 0x2b0cf2a6d168 - ddl
op: 5, Original op: 5, baseobjn: 0, objn: 0, objv: 0
DF: 0x00000002, DF2: 0x00000010, MF: 0x00020810, MF2: 0x00000000
PF: 0x00000000, PF2: 0x08000000
MergeFlag: 0x00, FilterFlag: 0x00
Id: 0, iotPrimaryKeyCount: 0, numChgRec: 1
NumCrSpilled: 0
RedoThread#: 1, rba: 0x0213d7.00023455.01ac
scn: 0x0002.fc0f8769, (scn: 0x0000.00000000, scn_sqn: 0, lcr_sqn: 0)xid: 0x0019.00e.0007f8d9, parentxid: 0x0019.00e.0007f8d9, proxyxid: 0x0000.000.00000000
ncol: 0 newcount: 24, oldcount: 0
LUBA: 0x4.1000ad1.e.0.0
++ LCR Dump Begin: 0x59b1afdc8 - commit
op: 7, Original op: 7, baseobjn: 0, objn: 0, objv: 0
DF: 0x00000002, DF2: 0x00000010, MF: 0x00220000, MF2: 0x02000000
PF: 0x00100000, PF2: 0x08040000
MergeFlag: 0x03, FilterFlag: 0x00
Id: 3, iotPrimaryKeyCount: 0, numChgRec: 0
NumCrSpilled: 0
RedoThread#: 1, rba: 0x0213d7.00023456.0108
scn: 0x0002.fc0f876b, (scn: 0x0002.fc0f876b, scn_sqn: 1, lcr_sqn: 1)xid: 0x0019.00e.0007f8d9, parentxid: 0x0019.00e.0007f8d9, proxyxid: 0x0000.000.00000000
ncol: 0 newcount: 0, oldcount: 0
LUBA: 0x4.1000ad1.e.0.0
Apply Slave is exiting due to error ORA-1031KSV 1031 error in slave process
*** 2013-04-04 16:58:47.067
ORA-01031: insufficient privileges
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-01031: insufficient privileges
h4.
2)
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /ora/Ora11203
System name: Linux
Node name: base
Release: 2.6.18-308.20.1.el5
Version: #1 SMP Tue Nov 6 04:38:29 EST 2012
Machine: x86_64
Instance name: oracle
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 16404, image: oracle@base (LSP0)
*** 2013-04-04 16:41:58.401
*** SESSION ID:(294.35251) 2013-04-04 16:41:58.401
*** CLIENT ID:() 2013-04-04 16:41:58.401
*** SERVICE NAME:(SYS$BACKGROUND) 2013-04-04 16:41:58.401
*** MODULE NAME:() 2013-04-04 16:41:58.401
*** ACTION NAME:() 2013-04-04 16:41:58.401
knahcapplymain: encountered error=26808
*** 2013-04-04 16:41:58.401
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=0, mask=0x0)
----- Error Stack Dump -----
ORA-26808: Apply process AS02 died unexpectedly.
ORA-01031: insufficient privileges
KNACDMP: *******************************************************
KNACDMP: Dumping apply coordinator's context at 25487cb0
KNACDMP: Apply Engine # 0
KNACDMP: Apply Engine name
KNACDMP: Coordinator's Watermarks ------------------------------
KNACDMP: Apply High Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Apply Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Recovery Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Fetch Low Watermark = 0002fc0f876b (SCN=0x0002.fc0f876b)
KNACDMP: Fetch Low Watermark Time = 811857327
KNACDMP: Oldest SCN = (SCN=0x0000.00000000)
KNACDMP: Oldest XID =
KNACDMP: Oldest Create Time = 0
KNACDMP: Last replicant syncpoint SCN = 0x0000.00000000
KNACDMP: Last syncpoint at primary SCN = 0x0002.fc0f875f
KNACDMP: First partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last processed = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Conservative pos = 0002fc0f8cb2 (SCN=0x0002.fc0f8cb2)
KNACDMP: Recovery start pos = (SCN=0x0000.00000000)
KNACDMP: Recovery high watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Spill LWM = (SCN=0x0000.00000000)
KNACDMP: Spill LWM Create Time = 0
KNACDMP: Coordinator's constants -------------------------------
KNACDMP: number of apply slaves = 5
KNACDMP: min number of apply slaves = 5
KNACDMP: max number of apply slaves = 5
KNACDMP: safety level (K) = 1
KNACDMP: max txns in memory = 400
KNACDMP: max constraints per table = 620
KNACDMP: hash table size (in entries) = 10000000
KNACDMP: Coordinator's intervals -------------------------------
KNACDMP: syncpoint interval (ms) = 0
KNACDMP: write low watermark interval(ms)= 1
KNACDMP: Coordinator's timers/counters -------------------------
KNACDMP: current time = 1365082918
KNACDMP: low watermark timer = 0
KNACDMP: syncpoint timer = 1365082918
KNACDMP: txnbufsize timer = 1365082220
KNACDMP: Coordinator's txn counts -------------------------
KNACDMP: total txns applied = 0
KNACDMP: number of unassigned comp txns = 0
KNACDMP: number of unassigned incomp txns= 0
KNACDMP: avg number of unassigned txns = 0.00
KNACDMP: total applied at last plwm write= 0
KNACDMP: apply prog. entries below plwm = 0
KNACDMP: total unassigned lcrs = 0
KNACDMP: Coordinator's State/Flags -----------------------------
KNACDMP: Coordinator's State = KNACST_APPLY_UNTIL_END
KNACDMP: Coordinator's Flags = 0x408004
KNACDMP: Slave counts ------------------------------------------
KNACDMP: number of reserved slaves = 0
KNACDMP: number of admin slaves = 0
KNACDMP: number of slaves in wait cmt = 1
KNACDMP: number of slaves suspended = 0
KNACDMP: number of safe slaves = 1
KNACDMP: avg number of idle slaves = 0.00
KNACDMP: number of slaves initializing = 0
KNACDMP: number of slaves terminating = 0
KNACDMP: Slave Lists -------------------------------------------
KNACDMP: Dumping All Slaves :-
Slave id = 0, State = 8, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 1, State = 9, Flags = 2, Assigned Xid = 0x001e.006.0005d213 1 txns 0 lcrs
Slave id = 2, State = 5, Flags = 1, Assigned Xid = 0x0019.00e.0007f8d9 1 txns 0 lcrs
Slave id = 3, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 4, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 5, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
KNACDMP: End dumping all slaves
KNACDMP: syncdep slaves = { }
KNACDMP: cont chunk slaves = { }
KNACDMP: cont slaves = { }
KNACDMP: exec txn slaves = { }
KNACDMP: Active slaves (2) = { 1 2 }
KNACDMP: Idle slaves (3) = { 3 4 5 }
KNACDMP: Txn Lists ---------------------------------------------
KNACDMP: Dumping all txns :-
XID = 0x001e.006.0005d213 Commit pos = 0002fc06718c (SCN=0x0002.fc06718c) State = 0
Lcr cnt = 0
Assigned to slavid = 1
Fetched chunks = 142
depslaves = { } wm depslaves = { }
XID = 0x0019.00e.0007f8d9 Commit pos = 0002fc0f876b (SCN=0x0002.fc0f876b) State = 1
Lcr cnt = 0
Assigned to slavid = 2
Fetched chunks = 1
depslaves = { } wm depslaves = { }
KNACDMP: End dumping all txns.
KNACDMP: Complete txns = { 0x0019.00e.0007f8d9 ** NO UNASS ** }
KNACDMP: Unassigned txns = { }
KNACDMP: *******************************************************
Warning: Apply error received: ORA-26714: User Error encountered during apply process. Clearing.
knahcapplymain: encountered error=26808
*** 2013-04-04 16:58:47.073
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=0, mask=0x0)
----- Error Stack Dump -----
ORA-26808: Apply process AS01 died unexpectedly.
ORA-01031: insufficient privileges
KNACDMP: *******************************************************
KNACDMP: Dumping apply coordinator's context at 25487cb0
KNACDMP: Apply Engine # 0
KNACDMP: Apply Engine name
KNACDMP: Coordinator's Watermarks ------------------------------
KNACDMP: Apply High Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Apply Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Recovery Low Watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Fetch Low Watermark = 0002fc0f876b (SCN=0x0002.fc0f876b)
KNACDMP: Fetch Low Watermark Time = 811857327
KNACDMP: Oldest SCN = (SCN=0x0000.00000000)
KNACDMP: Oldest XID =
KNACDMP: Oldest Create Time = 0
KNACDMP: Last replicant syncpoint SCN = 0x0000.00000000
KNACDMP: Last syncpoint at primary SCN = 0x0002.fc0f875f
KNACDMP: First partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last partition max pos = 0002fc10fab4 (SCN=0x0002.fc10fab4)
KNACDMP: Last processed = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Conservative pos = 0002fc0f8cb2 (SCN=0x0002.fc0f8cb2)
KNACDMP: Recovery start pos = (SCN=0x0000.00000000)
KNACDMP: Recovery high watermark = 0002fc0f875f (SCN=0x0002.fc0f875f)
KNACDMP: Spill LWM = (SCN=0x0000.00000000)
KNACDMP: Spill LWM Create Time = 0
KNACDMP: Coordinator's constants -------------------------------
KNACDMP: number of apply slaves = 5
KNACDMP: min number of apply slaves = 5
KNACDMP: max number of apply slaves = 5
KNACDMP: safety level (K) = 1
KNACDMP: max txns in memory = 400
KNACDMP: max constraints per table = 620
KNACDMP: hash table size (in entries) = 10000000
KNACDMP: Coordinator's intervals -------------------------------
KNACDMP: syncpoint interval (ms) = 0
KNACDMP: write low watermark interval(ms)= 1
KNACDMP: Coordinator's timers/counters -------------------------
KNACDMP: current time = 1365083926
KNACDMP: low watermark timer = 0
KNACDMP: syncpoint timer = 1365083926
KNACDMP: txnbufsize timer = 1365083218
KNACDMP: Coordinator's txn counts -------------------------
KNACDMP: total txns applied = 0
KNACDMP: number of unassigned comp txns = 0
KNACDMP: number of unassigned incomp txns= 1
KNACDMP: avg number of unassigned txns = 0.00
KNACDMP: total applied at last plwm write= 0
KNACDMP: apply prog. entries below plwm = 0
KNACDMP: total unassigned lcrs = 0
KNACDMP: Coordinator's State/Flags -----------------------------
KNACDMP: Coordinator's State = KNACST_APPLY_UNTIL_END
KNACDMP: Coordinator's Flags = 0x8204
KNACDMP: Slave counts ------------------------------------------
KNACDMP: number of reserved slaves = 0
KNACDMP: number of admin slaves = 0
KNACDMP: number of slaves in wait cmt = 0
KNACDMP: number of slaves suspended = 0
KNACDMP: number of safe slaves = 1
KNACDMP: avg number of idle slaves = 0.00
KNACDMP: number of slaves initializing = 0
KNACDMP: number of slaves terminating = 0
KNACDMP: Slave Lists -------------------------------------------
KNACDMP: Dumping All Slaves :-
Slave id = 0, State = 8, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 1, State = 5, Flags = 1, Assigned Xid = 0x0019.00e.0007f8d9 1 txns 0 lcrs
Slave id = 2, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 3, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 4, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
Slave id = 5, State = 0, Flags = 0, Not Assigned 0 txns 0 lcrs
KNACDMP: End dumping all slaves
KNACDMP: syncdep slaves = { }
KNACDMP: cont chunk slaves = { }
KNACDMP: cont slaves = { }
KNACDMP: exec txn slaves = { }
KNACDMP: Active slaves (1) = { 1 }
KNACDMP: Idle slaves (4) = { 2 3 4 5 }
KNACDMP: Txn Lists ---------------------------------------------
KNACDMP: Dumping all txns :-
XID = 0x001e.006.0005d213 Commit pos = 0002fc06718c (SCN=0x0002.fc06718c) State = 0
Lcr cnt = 0
Not Assigned
Fetched chunks = 142
depslaves = { } wm depslaves = { }
XID = 0x0019.00e.0007f8d9 Commit pos = 0002fc0f876b (SCN=0x0002.fc0f876b) State = 1
Lcr cnt = 0
Assigned to slavid = 1
Fetched chunks = 1
depslaves = { } wm depslaves = { }
KNACDMP: End dumping all txns.
KNACDMP: Complete txns = { 0x0019.00e.0007f8d9 ** NO UNASS ** }
KNACDMP: Unassigned txns = { 0x001e.006.0005d213 }
KNACDMP: *******************************************************
*** 2013-04-04 16:58:47.513
Warning: Apply error received: ORA-26714: User Error encountered during apply process. Clearing.
I watched this link http://docs.oracle.com/cd/E11882_01/server.112/e17069/strms_trapply.htm#i1014714 and I checked grants of schemas owners. These grants identical as on Primary DB Server.
I don't know what I need to do. It's very critical Server. Please help me.So, my problem is solved very easy.
Logical Standby didn't work because I added grant SYSDBA to temporary user and revoked this grant at once and I didn't change orapwSID file on Logical Standby from Primary.
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#SBYDB00424Note:
Whenever you grant or revoke the SYSDBA or SYSOPER privileges or change the login password of a user who has these privileges, you must replace the password file at each physical or snapshot standby database in the configuration with a fresh copy of the password file from the primary database.
>
So, I deleted temporary user on Logical Standby and it solved the problem.
Thanks a lot to all who helped me! -
Check database with error "ORA-01031: insufficient privileges"
Dear Gurus,
I ran "Check database" in DB13 but I got error "ORA-01031: insufficient privileges"
BR0280I BRCONNECT time stamp: 2010-03-31 12.37.00
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 STATEMENT FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDER BY OBJNAME'
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: cecxekdh.chk 2010-03-31 12.37.00
Note I try to execute sapdba_role.sql (with command "sqlplus /nolog @sapdba_role.sql SR3") as Note 134592 both login 'oradev' and 'devadm' but it seem to do nothing (not found sapdba_role.log)
Please advice.
Best regards,
Choosak B.
Ps.
detailed log of /oracle/DEV/sapcheck/cecxekdh.chk
BR0801I BRCONNECT 7.00 (40)
BR0477I Oracle pfile /oracle/DEV/102_64/dbs/initDEV.ora created from spfile /oracle/DEV/102_64/dbs/spfileDEV.ora
BR0805I Start of BRCONNECT processing: cecxekdh.chk 2010-03-31 12.30.53
BR0484I BRCONNECT log file: /oracle/DEV/sapcheck/cecxekdh.chk
BR0101I Parameters
Name Value
oracle_sid DEV
oracle_home /oracle/DEV/102_64
oracle_profile /oracle/DEV/102_64/dbs/initDEV.ora
sapdata_home /oracle/DEV
sap_profile /oracle/DEV/102_64/dbs/initDEV.sap
system_info devadm/oradev sapdev SunOS 5.10 Generic_142900-03 sun4v
oracle_info DEV 10.2.0.4.0 8192 7465 94896497 sapdev UTF8 UTF8
sap_info 701 SAPSR3 0002LK0003DEV0011N11827599290015Maintenance_ORA
make_info sun_64 OCI_102 Feb 21 2009
command_line brconnect -u / -jid CHECK20100331123000 -c -f check
alert_log /oracle/DEV/saptrace/background/alert_DEV.log
BR0280I BRCONNECT time stamp: 2010-03-31 12.30.56
BR0813I Schema owners found in database DEV:
DBSNMP, DIP, OPS$DEVADM, OPS$ORADEV, OPS$SAPSERVICEDEV, ORACLE_OCM, OUTLN, SAPSR3*, SYS, SYSTEM,
TSMSYS
BR0118I Tablespaces and data files
Tablespace Status File Status Id. Size MaxSize IncrSize BlkSize Device Type Link
PSAPSR3 ONLINE+ /oracle/DEV/sapdata2/sr3_1/sr3.data1 ONLINE+ 4 2411732992 10485760000 20971520 8192 16777219 FILE NOLINK
SYSTEM ONLINE+ /oracle/DEV/sapdata1/system_1/system.data1 SYSTEM+ 1 1017126912 10485760000 20971520 8192 16777219 FILE NOLINK
BR0119I Redo log files
File Status Group Size Device Type Link
/oracle/DEV/origlogA/log_g11m1.dbf INUSE 1 52429312 16777218 FILE NOLINK
/oracle/DEV/mirrlogA/log_g11m2.dbf INUSE 1 52429312 16777218 FILE NOLINK
/oracle/DEV/origlogB/log_g12m1.dbf INUSE 2 52429312 16777218 FILE NOLINK
/oracle/DEV/mirrlogB/log_g12m2.dbf INUSE 2 52429312 16777218 FILE NOLINK
/oracle/DEV/origlogA/log_g13m1.dbf INUSE 3 52429312 16777218 FILE NOLINK
/oracle/DEV/mirrlogA/log_g13m2.dbf INUSE 3 52429312 16777218 FILE NOLINK
/oracle/DEV/origlogB/log_g14m1.dbf INUSE 4 52429312 16777218 FILE NOLINK
/oracle/DEV/mirrlogB/log_g14m2.dbf INUSE 4 52429312 16777218 FILE NOLINK
BR0120I Control files
File Size Device Type Link
/oracle/DEV/origlogA/cntrl/cntrlDEV.dbf 15024128 16777218 FILE NOLINK
/oracle/DEV/origlogB/cntrl/cntrlDEV.dbf 15024128 16777218 FILE NOLINK
/oracle/DEV/sapdata1/cntrl/cntrlDEV.dbf 15024128 16777219 FILE NOLINK
BR0982I Database disk volumes
Directory / Raw disk Device Total[KB] Free[KB] Used[%] MaxNeed[KB] MaxMiss[KB]
/oracle/DEV/102_64 16777218 480700086 404332206 15.89 0 0
/oracle/DEV 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/mirrlogA 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/mirrlogB 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/origlogA 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/origlogB 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/sapdata1 16777219 591212116 404332206 31.61 240019884 0
/oracle/DEV/sapdata2 16777219 591212116 404332206 31.61 240019884 0
/oracle/DEV/sapdata3 16777219 591212116 404332206 31.61 240019884 0
/oracle/DEV/sapdata4 16777219 591212116 404332206 31.61 240019884 0
/oracle/DEV/saparch 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/sapbackup 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/sapcheck 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/sapreorg 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/saptrace 16777218 480700086 404332206 15.89 0 0
/oracle/DEV/oraarch 16777218 480700086 404332206 15.89 0 0
BR0280I BRCONNECT time stamp: 2010-03-31 12.31.29
BR0814I Number of tables in schema of owner SAPSR3: 74582
BR0836I Number of info cube tables found for owner SAPSR3: 49
BR0814I Number of tables/partitions in schema of owner SYS: 625/189
BR0814I Number of tables/partitions in schema of owner SYSTEM: 134/27
BR0280I BRCONNECT time stamp: 2010-03-31 12.32.28
BR0815I Number of indexes in schema of owner SAPSR3: 89159
BR0815I Number of indexes/partitions in schema of owner SYS: 678/199
BR0815I Number of indexes/partitions in schema of owner SYSTEM: 175/32
BR0280I BRCONNECT time stamp: 2010-03-31 12.37.00
BR0816I Number of segments in schema of owner DBSNMP: 25
BR0816I Number of segments in schema of owner OPS$DEVADM: 1
BR0816I Number of segments in schema of owner OUTLN: 9
BR0816I Number of segments/LOBs in schema of owner SAPSR3: 168369/2314
BR0816I Number of segments/LOBs in schema of owner SYS: 1831/87
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 353/22
BR0816I Number of segments in schema of owner TSMSYS: 4
BR0280I BRCONNECT time stamp: 2010-03-31 12.37.00
BR0961I Number of conditions found in DBCHECKORA: 118
BR0983I Tablespace fragmentation
Tablespace Files Tables Indexes Extents Total[KB] Used[%] Free[KB] FreeExt. MaxSize[KB] MaxAlloc[KB] Used[%] Free[KB] Largest[KB]
PSAPSR3 16 74248 88689 209864 54138880 94.51 2970752 240 163840000+ 109701120+ 31.23+ 112671872+ 9246720:7966720:7946240:7905280:7905280+
PSAPSR3701 14 0 0 0 54466560 0.00 54465664 20 143360000+ 88893440+ 0.00+ 143359104+ 9021440:8192000:8192000:8192000:8192000+
PSAPSR3701X 4 310 445 12190 68342784 94.20 3962240 7 68342784 0 94.20 3962240 1298432:1191936:979968:163776:163776
PSAPSR3USR 1 24 25 51 51200 6.50 47872 1 10240000+ 10188800+ 0.03+ 10236672+ 10188800+:47872:0:0:0
PSAPTEMP 1 0 0 0 1433600 0.00 1433600 0 10240000+ 8806400+ 0.00+ 10240000+ 8806400+:0:0:0:0
PSAPUNDO 1 0 0 0 7823360 0.00 7823296 406 10240000+ 2416640+ 0.00+ 10239936+ 2416640+:2041792:1814464:1433536:603072
SYSAUX 1 254 284 2059 307200 93.35 20416 16 10240000+ 9932800+ 2.80+ 9953216+ 9932800+:13248:3072:1024:640
SYSTEM 1 505 569 2926 993280 98.91 10816 2 10240000+ 9246720+ 9.59+ 9257536+ 9246720+:10176:640:0:0
Total: 39 75341 90012 227090 187556864 62.29 70734656 692 426742784 239185920 27.38 309920576 60157952:19463744:18936384:17695616:16864768
BR0280I BRCONNECT time stamp: 2010-03-31 12.37.00
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 STATEMENT FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDER BY OBJNAME'
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: cecxekdh.chk 2010-03-31 12.37.00
BR0280I BRCONNECT time stamp: 2010-03-31 12.37.00
BR0804I BRCONNECT terminated with errorsHi,
It solved after change permission of directory that sapdba_role.sql kept to oradev:dba after that it can write sapdba_role.log.
Thank you for your guideline.
Now, I can ran 'Check database' via DB13 without that error.
Best regards,
Choosak B. -
ORA-01031: insufficient privileges in oracle 10.2 in windows 2008r2
Dear All,
We have install SAP ecc6 EHP4 on oracle 10.2.0.5 on windows 2008R2
whenever we schedule any activity in db13 we are getting below error .
=================================
Job started
Step 001 started (program RSDBAJOB, variant &0000000000059, user ID PARESH)
Execute logical command BRBACKUP On host IRDAECCDEV
Parameters:-u / -jid FLL__20110922104226 -c force -t online -m full -p initieq_online.sap
BR0051I BRBACKUP 7.20 (3)
BR0055I Start of database backup: begvgwgh.fnf 2011-09-22 10.42.27
BR0484I BRBACKUP log file: K:\oracle\IEQ\sapbackup\begvgwgh.fnf
BR0280I BRBACKUP time stamp: 2011-09-22 10.42.28
BR0301E SQL error -1031 at location BrInitOraCreate-2, SQL statement:
'CONNECT / AT PROF_CONN IN SYSOPER MODE'
ORA-01031: insufficient privileges
BR0303E Determination of Oracle version failed
=================================
As per sap note 400421 i have carry out all the check and all are perfect.
Also i have check below notes and every thing are fine
Note 834917 - Oracle Database 10g: New database role SAPCONN
Note 1028220 - ORA-01031: Insufficient privileges despite SAPCONN role
Note 700548 - FAQ: Oracle authorizations
Also i have check the note which suggest to run the sapdba_role.sql script
But still i am getting the same error.
Also SAPSID services is running with user id sapserviceSID and i change it to SIDadm but no lock.
Request you please help me in this regard.
Sincerely
PareshAs expected
This is really a very small problem but very weird we suffered so many times. May be we should confirm the authorizations for SAPServiceSID and sidadm users on that windows host, sometimes we miss this part in Windows to check.
Kernel folders should be proper accessible by both of the users. Also, please keep SAP instance service via SAPServiceSID itself.
Just to reconfirm - you restarted SAP and restarted SAP/Oracle services as well, right ?
Thanks -
ORA-01031: insufficient privileges when connecting by SQL PLUS 8.0 with sys
From client, I use SQL PLUS 8.0 to connect to server: sys/password@MYDB1 as sysdba
The error always raises “ORA-01031: insufficient privileges”
I have done:
- Set: remote_login_passwordfile=exclusive in tnsname.ora file
- Uncomment: SQLNET.AUTHENTICATION_SERVICES in “sqlnet.ora” file
Also on this client:
to use SQL PLUS 8.0 to connect to server: manager/password@MYDB1. To connect normally
to use PLSQL Deverloper (it is the same oracle_home with SQL PLUS 8.0) to connect to database normally with user sys.
To use Enterprise manager console (it is other oracle_home with SQL PLUS 8.0) to connect to database normally with user sys
Please, help me to solve this troubleTHIS IS CONTENT OF SQLNET.ora CLIENT
# copyright (c) 1996 by the Oracle Corporation
# NAME
# sqlnet.ora
# FUNCTION
# Oracle Network Client startup parameter file example
# NOTES
# This file contains examples and instructions for defining all
# Oracle Network Client parameters. It should be possible to read
# this file and setup a Client by uncommenting parameter definitions
# and substituting values. The comments should provide enough
# explanation to enable a reasonable user to manage his TNS connections
# without having to resort to 'real' documentation.
# SECTIONS
# ONames Client
# Namesctl
# Native Naming Adpaters
# MODIFIED
# skanjila 06/06/97 - Correct default for Automatic_IPC
# eminer 05/15/97 - Add the relevant onrsd parameters.
# asriniva 04/23/97 - Merge with version from doc
# ggilchri 03/31/97 - mods
# bvasudev 02/07/97 - Change sqlnet.authentication_services documentation
# bvasudev 11/25/96 - Merge sqlnet.ora transport related parameters
# asriniva 11/12/96 - Revise with new OSS parameters.
# asriniva 11/05/96 - Add ANO parameters.
# - ONames Client ----------------------------------------------------
#names.default_domain = world
#Syntax: domain-name
#Default: NULL
# Indicates the domain from which the client most often requests names. When
# this parameter is set the default domain name (for example, US.ACME), the
# domain name will be automatically appended to any unqualified name in an
# ONAmes request (query, register, deregister, etc). Any name which contains
# an unescaped dot ('.') will not have the default domain appended. Simple
# names may be qualified with a trailing dot (for example 'rootserver.').
#names.initial_retry_timeout = 30
#Syntax: 1-600 seconds
#Default: 15 (OSD)
# Determines how long a client will wait for a response from a Names Server
# before reiterating the request to the next server in the preferred_servers
# list.
#names.max_open_connections = 3
#Syntax: 3-64
#Default: ADDRS in preferred_servers
# Determines how many connections an ONames client may have open at one time.
# Clients will ordinarily keep connections to servers open once they are
# established until the operation (or session in namesctl) is complete. A
# connection will be opened whenever needed, and if the maximum would be
# exceeded the least recently used connection will be closed.
#names.message_pool_start_size = 10
#Syntax: 3-256
#Default: 10
# Determines the initial number of messages allocated in the client's message
# pool. This pool provides the client with pre-allocated messages to be used
# for requests to ONames servers. Messages which are in the pool and unused
# may be reused. If a message is needed and no free messages are available in
# the pool more will be allocated.
#names.preferred_servers = (address_list =
# (address=(protocol=ipc)(key=n23))
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (address=(protocol=tcp)(host=cicada)(port=1575))
#Syntax: ADDR_LIST
#Default: Well-Known (OSD)
# Specifies a list of ONames servers in the client's region; requests will be
# sent to each ADDRESS in the list until a response is recieved, or the list
# (and number of retries) is exhausted.
# Addresses of the following form specify that messages to the ONames server
# should use Oracle Remote Operations (RPC):
# (description =
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (connect_data=(rpc=on))
#names.request_retries = 2
#Syntax: 1-5
#Default: 1
# Specifies the number of times the client should try each server in the list
# of preferred_servers before allowing the operation to fail.
#names.directory_path
#Syntax: <adapter-name>
#Default: TNSNAMES,ONAMES,HOSTNAME
# Sets the (ordered) list of naming adaptors to use in resolving a name.
# The default is as shown for 3.0.2 of sqlnet onwards. The default was
# (TNSNAMES, ONAMES) before that. The value can be presented without
# parentheses if only a single entry is being specified. The parameter is
# recognized from version 2.3.2 of sqlnet onward. Acceptable values include:
# TNSNAMES -- tnsnames.ora lookup
# ONAMES -- Oracle Names
# HOSTNAME -- use the hostname (or an alias of the hostname)
# NIS -- NIS (also known as "yp")
# CDS -- OSF DCE's Cell Directory Service
# NDS -- Novell's Netware Directory Service
# - Client Cache (ONRSD) ---------------------------------------------
names.addresses = (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Syntax: ADDR
Default: (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Address on which the client cache listens (is available to clients).
Any valid TNS address is allowed. The default should be used if at
all possible; clients have this entry hardwired as the first line
of their server-list file (sdns.ora). If the address is set to a
non-default value the client's preferred_servers parameter should
be set to include the client-cache address first.
names.authority_required = False
Syntax: T/F
Default: False
Determines whether system querys (for the root etc) require Authoritative
answers.
names.auto_refresh_expire = 259200
Syntax: Number of seconds, 60-1209600
Default: 259200
This is the amount of time (in seconds) the server will cache the addresses
of servers listed in server-list file (sdns.ora). When this time expires the
server will issue another query to the servers in those regions to refresh
the data.
names.auto_refresh_retry = 180
Syntax: Number of seconds, 60-3600
Default: sec. 180
This set how often the server will retry when the auto_refresh query fails.
names.cache_checkpoint_file = cache.ckp
Syntax: filename
Default: $ORACLE_HOME/network/names/ckpcch.ora
Specifies the name of the operating system file to which the Names Server
writes its foreign data cache.
names.cache_checkpoint_interval = 7200
Syntax: Number of seconds, 10-259200
Default: 0 (off)
Indicates the interval at which a Names Server writes a checkpoint of its
data cache to the checkpoint file.
names.default_forwarders=
(FORWARDER_LIST=
(FORWARDER=
(NAME= rootserv1.world)
(ADDRESS=(PROTOCOL=tcp)(PORT=42100)(HOST=roothost))))
Syntax: Name-Value/address_list
Default: NULL
A list (in NV form) of the addresses of other servers which should be used to
forward querys while in default_forwarder (slave) mode. NAME is the global
names for the server to which forwards whould be directed, and ADDRESS is its
address.
names.default_forwarders_only = True
Syntax: T/F
Default: False
When set to true this server will use the servers listed in default_forwarders
to forward all operations which involve data in foreign regions. Otherwise it
will use the servers defined in the server-list file (sdns.ora) in addition
to any defined in the default_forwarders parameter.
names.log_directory = /oracle/network/log
Syntax: directory
Default: $ORACLE_HOME/network/log
Indicates the name of the directory where the log file for Names Server
operational events are written.
names.log_file = names.log
Syntax: filename
Default: names.log
The name of the output file to which Names Server operational events are
written.
names.log_stats_interval = 3600
Syntax: Number of seconds, 10-ub4max
Default: sec. 0 (off)
Specifies the number of seconds between statistical entries in log file.
names.log_unique = False
Syntax: T/F
Default: False
If set to true the server will guarantee that the log file will have a unique
name which will not overwrite any existing files (note that log files are
appended to, so log information will not be lost if log_unique is not true).
names.max_open_connections = 10
Syntax: 3-64
Default: 10
Specifies the number of connections that the Names Server can have open at any
given time. The value is generated as the value 10 or the sum of one
connection for listening, five for clients, plus one for each foreign domain
defined in the local administrative region, whichever is greater. Any
operation which requires the server to open a network connection will use
an already open connection if it is available, or will open a connection
if not. Higher settings will save time and cost network resources; lower
settings save network resources, cost time.
names.max_reforwards = 2
Syntax: 1-15
Default: 2
The maximum number of times the server will attempt to forward a certain
operation.
names.message_pool_start_size = 24
Syntax: 3-256
Default: 10
Determines the initial number of messages allocated in the server's message
pool. This pool provides the server with pre-allocated messages to be used
for incoming or outgoing messages (forwards). Messages which are in the pool
and unused may be reused. If a message is needed and no free messages are
available in the pool more will be allocated.
names.no_modify_requests = False
Syntax: T/F
Default: False
If set to true, the server will refuse any operations which modify the
data in its region (it will still save foreign info in the cache which is
returned from foreign querys).
names.password = 625926683431AA55
Syntax: encrypted string
Default: NULL
If set the server will require that the user provide a password in his
namesctl session (either with sqlnet.ora:namesctl.server_password or 'set
password') in order to do 'sensitive' operations, like stop, restart, reload.
This parameter is generally set in encrypted form, so it can not be set
manually.
names.reset_stats_interval = 3600
Syntax: 10-ub4max
Default: 0 (off)
Specifies the number of seconds during which the statistics collected by the
Names Servers should accumulate. At the frequency specified, they are reset
to zero. The default value of 0 means never reset statistics.
names.trace_directory = /oracle/network/trace
Syntax: directory
Default: $ORACLE_HOME/network/trace
Indicates the name of the directory to which trace files from a Names Server
trace session are written.
names.trace_file = names.trc
Syntax: filename
Default: names.trc
Indicates the name of the output file from a Names Server trace session.
names.trace_func # NA
Syntax: T/F
Default: False
Internal mechanism to control tracing by function name.
names.trace_level = ADMIN
Syntax: T/F
Default: False
Syntax: {OFF,USER,ADMIN,0-16}
Default: OFF (0)
Indicates the level at which the Names Server is to be traced.
Available Values:
0 or OFF - No trace output
4 or USER - User trace information
10 or ADMIN - Administration trace information
16 or SUPPORT - WorldWide Customer Support trace information
names.trace_mask = (200,201,202,203,205,206,207)
Syntax: list of numbers
Default: NULL
Internal mechanism to control trace behavior.
names.trace_unique = True
Syntax: T/F
Default: False
Indicates whether each trace file has a unique name, allowing multiple trace
files to coexist. If the value is set to ON, a process identifier is appended
to the name of each trace file generated.
# - Namesctl ---------------------------------------------------------
#namesctl.trace_directory = /oracle/network/trace
#Syntax: directory
#Default: $ON/trace
# Indicates the name of the directory to which trace files from a namesctl
# trace session are written.
#namesctl.trace_file = namesctl.trc
#Syntax: filename
#Default: namesctl.trc
# Indicates the name of the output file from a namesctl trace session.
#namesctl.trace_func # NA
#Syntax: word list
#Default: NULL
# Internal mechanism to control tracing by function name.
#namesctl.trace_level = ADMIN
#Syntax: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
# Indicates the level at which the namesctl is to be traced.
# Available Values:
# 0 or OFF - No trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - WorldWide Customer Support trace information
#namesctl.trace_mask # NA
#Syntax: number list
#Default: NULL
# Internal mechanism to control trace behavior.
#namesctl.trace_unique = True
#Syntax: T/F
#Default: False
# Indicates whether each trace file has a unique name, allowing multiple trace
# files to coexist. If the value is set to ON, a process identifier is appended
# to the name of each trace file generated.
#namesctl.no_initial_server = False
#Syntax: T/F
#Default: False
# If set to TRUE namesctl will suppress any error messages when namesctl is
# unable to connect to a default names server.
#namesctl.internal_use = True
#Syntax: T/F
#Default: False
# If set to true namesctl will enable a set of internal undocumented commands.
# All internal commands are preceded by an underscore ('_') in order to
# distinguish them as internal. Without going into details, the commands
# enabled are:
# adddata createname deletename
# fullstatus ireplacedata newttlname
# pause remove_data renamename
# replacedata start walk*
# There are also a set of names server variables which may be set when
# namesctl is in internal mode:
# authorityrequired autorefresh*
# cachecheckpoint_interval cachedump
# defaultautorefresh_expire defaultautorefresh_retry
# defaultforwarders_only forwardingdesired
# maxreforwards modifyops_enabled
# nextcache_checkpoint nextcache_flush
# nextstat_log nextstat_reset
# reload request_delay
# restart shutdown
#namesctl.noconfirm = True
#Syntax: T/F
#Default: False
# When set to TRUE namesctl will suppress the confirmation prompt when
# sensitive operations (stop, restart, reload) are requested. This is
# quite helpful when using namesctl scripts.
#namesctl.server_password = mangler
#Syntax: string
#Default: NULL
# Automatically sets the password for the names server in order to perform
# sensitive operations (stop, restart, reload). The password may also be
# set manually during a namesctl session using 'set password'.
#namesctl.internal_encrypt_password = False
#Syntax: T/F
#Default: True
# When set to TRUE namesctl will not encrypt the password when it is sent to
# the names server. This would enable an unencrypted password to be set in
# names.ora:names.server_password
# - Native Naming Adpaters -------------------------------------------
#names.dce.prefix = /.:/subsys/oracle/names
#Syntax: DCE cell name
#Default: /.:/subsys/oracle/names
#Specifies the DCE cell (prefix) to use for name lookup.
#names.nds.name_context = personnel.acme
#Syntax: NDS name
#Default: (OSD?)
# Specifies the default NDS name context in which to look for the name to
# be resolved.
#names.nis.meta_map # NA
# Syntax: filename
# Default: sqlnet.maps
# Specifies the file to be used to map NIS attributes to an NIS mapname.
# Currently unused.
# - Advanced Networking Option Authentication Adapters ----------------
#sqlnet.authentication_services
# Syntax: A single value or a list from {beq, none, all, kerberos5,
# cybersafe, securid, identitx}
# Default: NONE
# Enables one or more authentication services. To enable
# authentication via the Oracle Security Server, use (beq, oss). If
# the Advanced Networking Option has been installed with Kerberos5
# support, using (beq, kerberos5) would enable authentication via
# Kerberos.
sqlnet.authentication_services=(beq, oss)
## Parmeters used with Kerberos adapter.
#sqlnet.kerberos5_cc_name
# Syntax: Any valid pathname.
# Default: /tmp/krb5cc_<uid>
# The Kerberos credential cache pathname.
#sqlnet.kerberos5_cc_name=/tmp/mycc
#sqlnet.kerberos5_clockskew
# Syntax: Any positive integer.
# Default: 300
# The acceptable difference in the number of seconds between when a
# credential was sent and when it was received.
#sqlnet.kerberos5_clockskew=600
#sqlnet.kerberos5_conf
# Syntax: Any valid pathname.
# Default: /krb5/krb.conf
# The Kerberos configuration pathname.
#sqlnet.kerberos5_conf=/tmp/mykrb.conf
#sqlnet.kerberos5_realms
# Syntax: Any valid pathname
# Default: /krb5/krb.realms
# The Kerberos host name to realm translation file.
#sqlnet.kerberos5_realms=/tmp/mykrb.realms
#sqlnet.kerberos5_keytab
# Syntax: Any valid pathname.
# Default: /etc/v5srvtab
# The Kerberos secret key file.
#sqlnet.kerberos5_keytab=/tmp/myv5srvtab
#sqlnet.authentication_kerberos5_service
# Syntax: Any string.
# Default: A default is not provided.
# The Kerberos service name.
#sqlnet.authentication_kerberos5_service=acme
## Parmeters used with CyberSAFE adapter.
#sqlnet.authentication_gssapi_service
# Syntax: A correctly formatted service principal string.
# Default: A default is not provided.
# The CyberSAFE service principal
#sqlnet.authentication_gssapi_service=acme/[email protected]
## Parmeters used with Identix adapter.
#sqlnet.identix_fingerprint_method
# Syntax: Must be oracle.
# Default: A default is not provided.
# The Identix authentication server method
#sqlnet.identix_fingerprint_method=oracle
#sqlnet.identix_fingerprint_database
# Syntax: Any string.
# Default: A default is not provided.
# The Identix authentication server TNS alias
#sqlnet.identix_fingerprint_database=ofm
#sqlnet.identix_fingerprint_database_user
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known username.
#sqlnet.identix_fingerprint_database_user=ofm_client
#sqlnet.identix_fingerprint_database_password
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known password.
#sqlnet.identix_fingerprint_database_password=ofm_client
# - Advanced Networking Option Network Security -------------------------
#sqlnet.crypto_checksum_client
#sqlnet.crypto_checksum_server
#sqlnet.encryption_client
#sqlnet.encryption_server
# These four parameters are used to specify whether a service (e.g.
# crypto-checksumming or encryption) should be active:
# Each of the above parameters defaults to ACCEPTED.
# Each of the above parameters can have one of four possible values:
# value meaning
# ACCEPTED The service will be active if the other side of the
# connection specifies "REQUESTED" or REQUIRED" and
# there is a compatible algorithm available on the other
# side; it will be inactive otherwise.
# REJECTED The service must not be active, and the connection
# will fail if the other side specifies "REQUIRED".
# REQUESTED The service will be active if the other side specifies
# "ACCEPTED", "REQUESTED", or "REQUIRED" and there is a
# compatible algorithm available on the other side; it
# will be inactive otherwise.
# REQUIRED The service must be active, and the connection will
# fail if the other side specifies "REJECTED" or if there
# is no compatible algorithm on the other side.
#sqlnet.crypto_checksum_types_client
#sqlnet.crypto_checksum_types_server
#sqlnet.encryption_types_client
#sqlnet.encryption_types_server
# These parameters control which algorithms will be made available for
# each service on each end of a connection:
# The value of each of these parameters can be either a parenthesized
# list of algorithm names separated by commas or a single algorithm
# name.
# Encryption types can be: RC4_40, RC4_56, RC4_128, DES, DES40
# Encryption defaults to all the algorithms.
# Crypto checksum types can be: MD5
# Crypto checksum defaults to MD5.
#sqlnet.crypto_seed ="4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf"
#sqlnet.crypto_checksum_server = required
#sqlnet.encryption_server = required
# - Oracle Security Server ---------------------------------------------
#oss.source.my_wallet
# Syntax: A properly formatted NLNV list.
# Default: Platform specific. Unix: $HOME/oracle/oss
# The method for retrieving and storing my identity.
#oss.source.my_wallet
# =(source
# =(method=file)
# (method_data=/dve/asriniva/oss/wallet)
#oss.source.location
# Syntax: A properly formatted NLNV list.
# Default: Oracle method, oracle_security_service/oracle_security_service@oss
# The method for retrieving encrypted private keys.
#oss.source.location
# =(source
# =(method=oracle)
# (method_data=
# (sqlnet_address=andreoss)
# - Sqlnet(v2.x) and Net3.0 Client ------------------------------------------
# In the following descriptions, the term "client program" could mean
# either sqlplus, svrmgrl or any other OCI programs written by users
#trace_level_client = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the client program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#trace_directory_client = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the client execution are written.
#Supported since: v2.0
#trace_file_client = /oracle/network/trace/cli.trc
#Possible values: Any valid file name
#Default: $ORACLE_HOME/network/trace/cli.trc ($ORACLE_HOME =
# /oracle at customer site)
#Purpose: Indicates the name of the file to which the execution trace
# of the client is written to.
#Supported since: v2.0
#trace_unique_client = ON
#Possible values: {ON, OFF}
#Default: OFF
#Purpose: Used to make each client trace file have a unique name to
# prevent each trace file from being overwritten by successive
# runs of the client program
#Supported since: v2.0
#log_directory_client = /oracle/network/log
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/log ($ORACLE_HOME = /oracle at customer
# site)
#Purpose: Indicates the name of the directory to which the client log file
# is written to.
#Supported since: v2.0
#log_file_client = /oracle/network/log/sqlnet.log
#Possible values: This is a default value, u cannot change this
#Default: $ORACLE_HOME/network/log/sqlnet.log ($ORACLE_HOME=/oracle in
# customer site)
#Purpose: Indicates the name of the log file from a client program
#Supported since: v2.0
#log_directory_server = /oracle/network/trace
#Possible values: Any valid diretcory path with write permission
#Default: $ORACLE_HOME/network/trace ( $ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which log files from the
# server are written
#Supported since: v2.0
#trace_directory_server = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network_trace ( $ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the server are written
#Supported since: v2.0
#trace_file_server = /orace/network/trace/svr_<pid>.trc
#Possible values: Any valid filename
#Default: $ORACLE_HOME/network/trace/svr_<pid>.trc where <pid? stands for
# the process id of the server on UNIX systems
#Purpose: Indicates the name of the file to which the execution trace of
# the server program is written to.
#Supported since: v2.0
#trace_level_server = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#use_dedicated_server = ON
#Possible values: {OFF,ON}
#Default: OFF
#Purpose: Forces the listener to spawn a dedicated server process for
# sessions from this client program.
#Supported since: v2.0
#use_cman = TRUE
#Possible values: {TRUE, FALSE}
#Default: FALSE
#Purpose:
#Supported since: v3.0
#tnsping.trace_directory = /oracle/network/trace
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the directory to which the execution trace from
# the tnsping program is to be written to.
#Supported since: v2.0
#tnsping.trace_level = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#sqlnet.expire_time = 10
#Possible values: 0-any valid positive integer! (in minutes)
#Default: 0 minutes
#Recommended value: 10 minutes
#Purpose: Indicates the time interval to send a probe to verify the
# client session is alive (this is used to reclaim watseful
# resources on a dead client)
#Supported since: v2.1
#sqlnet.client_registration = <unique_id>
#Possible values:
#Default: OFF
#Purpose: Sets a unique identifier for the client machine. This
# identifier is then passed to the listener with any connection
# request and will be included in the Audit Trail. The identifier
# can be any alphanumeric string up to 128 characters long.
#Supported since: v2.3.2
#bequeath_detach = YES
#Possible values: {YES,NO}
#Default: NO
#Purpose: Turns off signal handling on UNIX systems. If signal handling
# were not turned off and if client programs written by users make
# use of signal handling they could interfere with Sqlnet/Net3.
#Supported since: v2.3.3
#automatic_ipc = OFF
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: Force a session to use or not to use IPC addresses on the
# client's node.
#Supported since: v2.0
#disable_oob = ON
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: If the underlying transport protocol (TCP, DECnet,...) does
# not support Out-of-band breaks, then disable out-of-band
# breaks
#Supported since: v2.0
# -
ORA-01031: insufficient privileges and SAP license issue
Hi,
We have successfully installed the NW7.31 with ORACLE 11.2.0.4 on AIX.
Its a fresh installed system, after installation we have applied the saplicense through SLICENSE and after that upgrade the kernel(We have run the ./saproot.sh <SAPSID> with root user).
Kernels are upgraded successfully, we have checked the disp+work, kernel patch level is upgraded successfully.
SAP is started normally, but now we are facing two issues on OS level.
1. Issue is regarding to the saplicense command....
abcadm 4> saplicense -show
saplicense: no license entries found
abcadm 5> saplicense -number
saplicense: read installation number failed
*** Can not read profile parameter SAPSYSTEMNAME
Start saplicense with -number NAME=<sid>
abcadm 6> saplicense -number NAME=ABC
Read installation number for SAP SYSTEM: ABC
INSTALLATION NO = INITIAL
2. When we are trying to run the Update statistics on database with DB13 command following error occurs. Even i have tried via brtools but still following error occures.
BR0301E SQL error -1031 at location BrLicCheck-12, SQL statement:
'SELECT MAX(SYSTEMNAME), MAX(SYSID) FROM SAP_MLICHECK WHERE EXPIRATION_DATE = (SELECT MAX(EXPIRATION_DATE) FROM SAP_MLICHECK)'
ORA-01031: insufficient privileges
I have checked the R3trans -d it working fine.
oraabc 15> R3trans -d
This is R3trans version 6.24 (release 721 - 08.05.14 - 16:50:00).
unicode enabled version
R3trans finished (0000).
In SLICENSE tcode it showing the license entries but when we are run the command from os level "saplicense", it didnt found any license entry.
Kindly suggest.
regards,
amitHi Deepak,
NW SP level as follows.............
SAP_BASIS
731
0011
SAP_ABA
731
0011
PI_BASIS
731
0011
ST-PI
2008_1_710
0010
SAP_BW
731
0011
SAP Kernel as follows....................
kernel release 721
kernel make variant 721_EXT_REL
compiled on AIX 1 6 00CFADC14C00 for rs6000_64
compiled for 64 BIT
compilation mode UNICODE
compile time May 27 2014 03:48:09
update level 0
patch number 300
source id 0.300
DBATOOLS level as follows...............
oraabc 12> brtools
BR0651I BRTOOLS 7.20 (36)
regards,
amit -
ORA-01031: insufficient privileges when using RESOLVECONFLICT
Hello,
I use RESOLVECONFLICT component for a new filter.
I have an insufficient privileges error :
2015-03-18 11:26:49 WARNING OGG-01919 Oracle GoldenGate Delivery for Oracle, pivot01.prm: Missing RESOLVECONFLICT for SQL error 1.
2015-03-18 11:26:49 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, pivot01.prm: OCI Error ORA-01031: insufficient privileges (status = 1031), SQL <SELECT ROWNUM FROM "OGG_STGPIV"."PSTREENODE" WHERE "SETID" = :b0 AND "SETCNTRLVALUE" = :b1 AND "TREE_NAME" = :b2 AND "EFFDT" = :b3 AND "TREE_NODE_NUM" = :b4 AND "TREE_NODE" = :b5 AND "TREE_BRANCH" = :b6 FOR UPDATE >.
2015-03-18 11:26:49 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, pivot01.prm: Aborted grouped transaction on 'OGG_STGPIV.PSTREENODE', Database error 1 (OCI Error ORA-00001: unique constraint (OGG_STGPIV.PSTREENODE_INDX01) violated (status = 1), SQL <INSERT INTO "OGG_STGPIV"."PSTREENODE" ("SETID","SETCNTRLVALUE","TREE_NAME","EFFDT","TREE_NODE_NUM","TREE_NODE","TREE_BRANCH","TREE_NODE_NUM_END","TREE_LEVEL_NUM","TREE_NODE_TYPE","PARENT_NODE_NUM","PARENT_NODE_NAME","OLD_TREE_NODE_NUM","NODECOL_IMAGE","NODEEXP_IMAGE","DML_TYPE","DML_DATE","DML_SCN") VALUES (:a0,:a1,:a2,:a3,:a4,:a5,:a6,:a7,:a8,:a9,:a10,:a11,:a12,:a13,:a14,:a15,:a16,:a17)>).
2015-03-18 11:26:49 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, pivot01.prm: Repositioning to rba 4862 in seqno 19.
2015-03-18 11:26:49 WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, pivot01.prm: SQL error 1 mapping PIVOTMAT2.PSTREENODE to OGG_STGPIV.PSTREENODE OCI Error ORA-00001: unique constraint (OGG_STGPIV.PSTREENODE_INDX01) violated (status = 1), SQL <INSERT INTO "OGG_STGPIV"."PSTREENODE" ("SETID","SETCNTRLVALUE","TREE_NAME","EFFDT","TREE_NODE_NUM","TREE_NODE","TREE_BRANCH","TREE_NODE_NUM_END","TREE_LEVEL_NUM","TREE_NODE_TYPE","PARENT_NODE_NUM","PARENT_NODE_NAME","OLD_TREE_NODE_NUM","NODECOL_IMAGE","NODEEXP_IMAGE","DML_TYPE","DML_DATE","DML_SCN") VALUES (:a0,:a1,:a2,:a3,:a4,:a5,:a6,:a7,:a8,:a9,:a10,:a11,:a12,:a13,:a14,:a15,:a16,:a17)>.
privilege granted to my user :
grant EXECUTE ANY RULE SET to "GGADM" WITH ADMIN OPTION;
grant SELECT ANY DICTIONARY to "GGADM" ;
grant UPDATE ANY TABLE to "GGADM" ;
grant INSERT ANY TABLE to "GGADM" ;
grant LOCK ANY TABLE to "GGADM" ;
grant CREATE TABLE to "GGADM" ;
grant CREATE RULE to "GGADM" WITH ADMIN OPTION;
grant CREATE RULE SET to "GGADM" WITH ADMIN OPTION;
grant DELETE ANY TABLE to "GGADM" ;
grant UNLIMITED TABLESPACE to "GGADM" ;
grant ALTER SESSION to "GGADM" ;
grant CREATE EVALUATION CONTEXT to "GGADM" WITH ADMIN OPTION;
grant DEQUEUE ANY QUEUE to "GGADM" WITH ADMIN OPTION;
grant CREATE JOB to "GGADM" ;
grant SELECT ANY TRANSACTION to "GGADM" ;
grant CREATE SESSION to "GGADM" ;
Any idea?Hello,
Try to grant SELECT ANY TABLE to GGADM;
Regards
Arturo -
Oracle Database 10g Express Edition (ORA-01031: insufficient privileges)
Hello,
I am new to 10g Express. I am working on Windows XP and I have Oracle App Server and JDev install on my box. I just installed 10g Express. When I try to connect to the database but I get the following error msg:
SQL> connect sys/admin as sysdba;
ERROR: ORA-01031: insufficient privileges
I am also not able to see the homepage either.
Can some please help.
Thanks
etnotAre you saying you can only have one instance of an
Oracle Database install if you are going to use
Oracle XE?Yes.
Oracle Database XE is free for usage with the following limitations:
Supports up to 4GB of user data (in addition to Oracle system data)
Single instance only of Oracle Database XE on any server
May be installed on a multiple CPU server, but only executes on one processor in any server
May be installed on a server with any amount of memory, but will only use up to 1GB RAM of available memory -
Why Am I Getting ORA-01031: insufficient privileges To Add Trandata?
I create a table C##TOM.CUSTOMERS in SQL Plus.
I go to the ggsci command line and attempt to add trandata and get the following insufficient privileges response:
GGSCI (TPFAEFFL-LAP) 11> add trandata C##TOM.CUSTOMERS
ERROR: Error (1031, ORA-01031: insufficient privileges) start select in get_total_columns.
I have already granted connect, dba, flashback, create session, alter session, select any dictionary, select any table, select any transaction, and select unlimited tablespace to the user.
What privileges am I missing?
TIA.Did you use the DBMS_GOLDENGATE_AUTH.GRANT_ADMIN_PRIVILEGE procedure to the DBLOGIN user?
This call grants all of the required privileges for ADD SCHEMATRANDATA and ADD TRANDATA - whether it is classic or integrated capture. -
DB13 jobs errors (ORA-01031: insufficient privileges) after System Copy
Dear SAP gurus,
I performed an ECC60 System copy from Dev to a sandbox system (Linux-Oracle). When I try to access DB13 all jobs are cancelled:
Example of "check and update optimizer statistics" job log:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000001, user ID TGEPOMA1)
Execute logical command BRCONNECT On host eccsbx01
Parameters: -u / -jid STATS20110720050000 -c -f stats -t ALL
BR0801I BRCONNECT 7.00 (46)
BR0805I Start of BRCONNECT processing: cegkmpzk.sta 2011-07-27 05.00.32
BR0484I BRCONNECT log file: /oracle/SBX/sapcheck/cegkmpzk.sta
BR0280I BRCONNECT time stamp: 2011-07-27 05.00.36
BR0301W SQL error -1031 at location brc_dblog_open-1, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20110727050032', 'sta', 'SBX', 'ALL', '9999', '
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
I read the SAP note 400241 (Problems with ops$ or sapr3 connect to Oracle) and performed the general checks such checking the SAPUSER owner,etc.
If I executed the sapdba_role.sql script I get the following log errors on sapdba_role.log:
old 1: grant ALL on &User..SDBAH to sapdba
new 1: grant ALL on SAPR3.SDBAH to sapdba
grant ALL on SAPR3.SDBAH to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
old 1: grant ALL on &User..SDBAD to sapdba
new 1: grant ALL on SAPR3.SDBAD to sapdba
grant ALL on SAPR3.SDBAD to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
old 1: grant ALL on &User..DBAML to sapdba
new 1: grant ALL on SAPR3.DBAML to sapdba
grant ALL on SAPR3.DBAML to sapdba
Should I create those tables in order to allow ops$ user to access Oracle DB in order to execute the DB job from DB13?
Please let me know if anybody can help me or has face a situation before?
Thanks in advance, MarcHi Markus,
I dont think that it is an authorization issue becasue it has the same authorizations than Development:
eccsbx01:/sapmnt/SBX/exe # ls -ltr br*
-rwsr-srw- 1 orasbx dba 4121272 Jul 19 11:55 brarchive
-rwsr-srw- 1 orasbx dba 4227280 Jul 19 11:55 brbackup
-rwsrwxr-x 1 orasbx sapsys 5489731 Jul 19 11:55 brconnect
-rwxr-xr-x 1 sbxadm sapsys 4537880 Jul 19 11:55 brrecover
-rwxr-xr-x 1 sbxadm sapsys 1554379 Jul 19 11:55 brrestore
-rwxr-xr-x 1 sbxadm sapsys 5617510 Jul 19 11:55 brspace
-rwsrwxr-x 1 orasbx sapsys 2289337 Jul 19 11:55 brtools
Regards, Marc -
Brbackup error ; ORA-01031: insufficient privileges
Hi Experts,
We are getting following error when to try to backup our database ;
BR0301E SQL error -1031 at location BrSapTspList-8, SQL statement:
'PREPARE stmt_1 STATEMENT FROM'
'SELECT TABSPACE FROM "SAPSR3".TSORA UNION SELECT INDSPACE FROM "SAPSR3".TSORA ORDER BY 1'
ORA-01031: insufficient privileges
BR0056I End of database backup: bebakpth.ant 2009-07-16 10.54.47
BR0280I BRBACKUP time stamp: 2009-07-16 10.54.47
BR0054I BRBACKUP terminated with errors
How can we fix it,
RegardsDear atakan yavuz
i have faced this issue and fix the issue.
After executing Oracle sapdba_role.sql which is provided in sapdba_role_ora10.SAR from SAP Note: Note 134592 - Importing the SAPDBA role (sapdba_role.sql)
Please execute manaully from sql prompt below statemets to assign the privileges to the owner SAPSR3 for the following tables which will fix the issue.
grant ALL on SAPSR3.SDBAH to sapdba;
grant ALL on SAPSR3.SDBAD to sapdba;
grant ALL on SAPSR3.DBAML to sapdba;
grant ALL on SAPSR3.DBARCL to sapdba;
grant ALL on SAPSR3.DBAFID to sapdba;
grant ALL on SAPSR3.DBAEXTL to sapdba;
grant ALL on SAPSR3.DBAREOL to sapdba;
grant ALL on SAPSR3.DBABARL to sapdba;
grant ALL on SAPSR3.DBADFL to sapdba;
grant ALL on SAPSR3.DBAOPTL to sapdba;
grant ALL on SAPSR3.DBASPAL to sapdba;
grant ALL on SAPSR3.DBABD to sapdba;
grant ALL on SAPSR3.DBABL to sapdba;
grant ALL on SAPSR3.DBATL to sapdba;
grant ALL on SAPSR3.DBAOBJL to sapdba;
grant ALL on SAPSR3.DBAPHAL to sapdba;
grant ALL on SAPSR3.DBAGRP to sapdba;
grant ALL on SAPSR3.DBAERR to sapdba;
grant ALL on SAPSR3.DBATRIAL to sapdba;
grant ALL on SAPSR3.DBSTATC to sapdba;
grant ALL on SAPSR3.DBSTATTORA to sapdba;
grant ALL on SAPSR3.DBSTATIORA to sapdba;
grant ALL on SAPSR3.DBSTATHORA to sapdba;
grant ALL on SAPSR3.DBSTAIHORA to sapdba;
grant ALL on SAPSR3.DBMSGORA to sapdba;
grant ALL on SAPSR3.DBCHECKORA to sapdba;
grant ALL on SAPSR3.MLICHECK to sapdba;
grant SELECT on SAPSR3.TGORA to sapdba;
grant SELECT on SAPSR3.IGORA to sapdba;
grant SELECT on SAPSR3.TSORA to sapdba;
grant SELECT on SAPSR3.TAORA to sapdba;
grant SELECT on SAPSR3.IAORA to sapdba;
grant SELECT on SAPSR3.SVERS to sapdba;
grant SELECT on SAPSR3.CVERS to sapdba;
grant SELECT on SAPSR3.DD02L to sapdba;
grant SELECT on SAPSR3.DD09L to sapdba;
grant SELECT on SAPSR3.DDNTT to sapdba;
grant SELECT on SAPSR3.DDART to sapdba;
grant SELECT on SAPSR3.DARTT to sapdba;
grant SELECT on SAPSR3.DBCHK to sapdba;
grant SELECT on SAPSR3.DBDIFF to sapdba;
grant ALL on SAPSR3.SAPLIKEY to sapdba;
grant SELECT on SAPSR3.RSNSPACE to sapdba;
grant SELECT on SAPSR3.RSPSPACE to sapdba;
The cause is sapdba role script existing owner is SAPR3 but from SR3 release default owner is SAPSR3 so which is causing this issue so when grant the above tables to the SAP DB owner SAPSR3 where they can access the tables.The similar issue you will when you try to execute DBCheck also and even saplicense shows no valid license found.
Me too searching for Oracle 10.2.0.4 SAP SR3 release sapdba role in service market place which i am unable to find waiting for update from sap suppport.
Update in this thread after this action whether your issue has been solved.I
Best Regards,
Venkata.
Edited by: babjipvr on Jul 22, 2009 6:25 PM
Edited by: babjipvr on Jul 22, 2009 6:31 PM
Maybe you are looking for
-
How do I add downloadable PDF files to my web site?
Help! I'm creating a web site, and I need to add two buttons that, when clicked, will download two different PDF files. I have absolutely NO IDEA how to do this!!! Not a clue! I'm using actionscript 3 and Flash CS4. Any help would be greatly apprecia
-
G510 - Lenovo Energy Management on Windows 8.1 Pro
Hello, Today I installed a fresh Windows 8.1 Pro copy on my Lenovo G510 Notebook. Everything went well and all drivers which I had downloaded from the support site installed successfully. There was no Energy Management Software available for Windows
-
How to load different certificates in a keystore for mail sender adapter
Hi, we are getting mails from different partners. Some have digital signatures others not. Now we wanna verify the mails with digital signatures. My problem is, that we have to enter the "keystore" and the "keystore entry" in the sender agreement - b
-
Hotmail Account Won't Set Up On New Phone
I posted this the other day, but it seems to have gotten lost in all the other posts, so I am posting it again Hello all, I am having an issue setting up my Hotmail account on a Curve 8530. A bit of backstory: I got my first BlackBerry in August 2010
-
External hard disk wouldnt work !!
Hello All, I just bought a Toshiba external hard disk and my Mac doesnt read it. I receive this must every time. I've tried it on Windows and it works just fine. I'm using OS X 10.9.3 . please help !!