ORA-10827: database must be opened with MIGRATE option

Hi,
We are trying to migrate an Oracle 8.1.7 database to an Oracle 9i(9.2) database. I moved all the database files to the appr folder and I created a new instance using:
oradim -new -sid PROD -intpwd Oracle -startmode a -pfile C:\oracle\OraDb\Neuropace\initPROD.ORA.
I checked the alter log file and I get the following error:
ORA-10827: database must be opened with MIGRATE option.
How should one go about migrating a database(different versions). I went ahead with the migration. I opened the database using
alter database open resetlogs migrate.
But when i log into the database, I get an internal code error.
Any pointers?.

You must not open normally your database after an upgrade, in short the method is
1) startup migrate
2) run the upgrade script (which one depends on your old database version)
For step-by-step instructions see
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96530/upgrade.htm#1009200
'alter database open resetlogs migrate' is only applicable to upgrades from version 7 to 9.2, hopefully your database is not corrupted now.

Similar Messages

ORA-39700: database must be opened with UPGRADE option

Dear buddies,
I just opened my database : startup upgrade and it started up.
But couldn't perform a backup.
Should I be running pupbld?
Could this problem be due to some opatch?
Here is a part of my alert log:
Thread 1 opened at log sequence 1050
Current log# 3 seq# 1050 mem# 0: D:\ORACLE\DATA\MIG\LOG_03.DBF
Successful open of redo thread 1
Wed Aug 11 13:35:15 2010
MTTR advisory is disabled because either FAST_START_IO_TARGET or LOG_CHECKPOINT_INTERVAL is set
Wed Aug 11 13:35:15 2010
SMON: enabling cache recovery
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\udump\mig_ora_1564.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Aug 11 13:35:16 2010
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_pmon_3088.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_reco_1868.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_psp0_2624.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_mman_3312.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_dbw0_2304.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_lgwr_552.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_ckpt_2300.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:17 2010
Errors in file d:\oracle\admin\mig\bdump\mig_smon_2136.trc:
ORA-00704: bootstrap process failure
Instance terminated by USER, pid = 1564
ORA-1092 signalled during: ALTER DATABASE OPEN...
Please comment.
Thanks.
Nith

I just opened my database : startup upgrade and it started up.
But couldn't perform a backup.As you said you have started the DB in upgrade mode and trying to take the backup of database. I think you can't take the backup of DB in upgrade mode.Please shut it down first and start up it in normal mode and do the backup.
Which backup strategy you are following?
What you exactly want to do upgrade the database or trying to take a bcakup?

I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

Playing dvds with vlc ... no right-click and 'open with vlc' option???

i searched discussions for this question but wasn't sucessful ... so here's my question:
i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
thanx for your help!
2.1 GHz iMac G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6)

found the solution by myself: open vlc, open the playlist and drag the dvd onto the playlist, then hit play ...

Watching dvds with vlc-no right-click 'open with vlc' option as on the pc?

i searched discussions for this question but wasn't sucessful ... so here's my question:
i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
thanx for your help!
2.1 GHz iMac G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6)

If you want all video DVDs to open in VLC, go to System Preferences>CDs & DVDs>When you insert a video DVD:>Open other application> and now select VLC.
This will open VLC, but the DVD will not automatically play, you have to go to File>Open Disc once in VLC.
One question though, why not use Apple's DVD player Application?
Daniel Gilmour
eMac 1.25 Ghz, iBook 14'' 1.42 Ghz Mac OS X (10.4.5) 512mb ram, Superdrive; 5G 30gb iPod, 4GB White iPod nano

Database connection dailog opens with missing fields

Greetings all,
I have one user who has a couple reports that do not display all the fields in the database connection dialog box when she attempts to refresh the data in a report.
Normally this dialog box opens with the Datasource, UserID (of the last person who saved data with the report) and Database prefilled, so only the Password needs to be completed or the UserID changed.
For her (and this is only happening on a couple reports), only the Datasource text box is visible. The datasource is correctly filled in but in order to see the other fields, she needs to click the next button and then click back. Then all three fields - UserID, Password and Database need to be entered.
This only started in the past couple months and so far is only occuring with 2 reports, both new. Other new reports are acting normally.
We are using Crystal Reports XI with the latest service packs. Our reports are in a shared folder on the network. So far I have not been able to duplicate this behavior on anyone else' machine.
Any idea's on what might be causing this or how to correct it?
TIA,
Bob

I would check that persons database client and/or version of MDAC. May also be a permission issue on tables.

Dreamweaver MX image "open with FW" option opens FWMX want to change this to FWMX2004

I hope the title made sense
I have the old Studio MX (FW, DW etc), and I also have a copy of fireworks 2004,
When i am using dreamweaver MX and want to edit an image on a site and i double click on the image it opens fireworks MX, i want it to open Fireworks MX 2004, now i can get it to open in Fireworks MX2004 by right clicking on the image and selecting "open with" and then navigating to the fireworks MX2004 folder to open it, which is a bit of a hassle,
Is there someway to get it to open in Fireworks MX 2004 when double clicking?
Obviously i can't afford to upgrade to the newer versions of either programs, (although i will accept donations ), and I would prefer to keep fireworks MX on the machine as back-up just in case mx2004 goes pear shaped.
Thanks in advance for any help.
Nigel

In Dreamweaver, go to Edit > Preferences > File Types / Editors and edit filetypes that you would like to be opened / edited with Fireworks MX 2004. There are a lot of options available there, and this should do the trick.
There's even an option to specify the path to Fireworks, like:
C:\Program Files\Adobe\Adobe Fireworks CS4\Fireworks.exe
-- just edit it to match where your copy of Fireworks MX 2004 is, and you're done -- I suppose that in your case, it should be here:
C:\Program Files\Macromedia\Fireworks\
...but I might be wrong -- it's been a long time since I installed anything older than Fireworks CS3...
Hope this helps!

How to open documents by default with Pages 4 ( "Change All", "Open With" info option)?

Hello I installed Pages 5, which I don't like.
So I would like to open all my documents by default with Pages 4. However, I can't get the system to fix this default. In the "Info" panel of the Finder, under "Open With", I can set Pages 4 as a default app for one single document, but when I ask to "Change All" documents and use Pages 4, the system refuses to use the setting I select, and keeps reverting to Pages 5. Any suggestion, short of uninstalling Pages 5? Although I don't like it, I need to use it sporadically, so I don't want to uninstall it.
Thanks.
l.

As far as I know, there is not any built-in way to do this. Perhaps an add-on can modify how the "star" works or add a new button for this function?
Until then, you'll have to continue changing the pop-up list:
* when bookmarking a page, double-click the star, and change "Unsorted Bookmarks" to "Bookmarks Toolbar" and then click Done
* when bookmarking a page, press Ctrl+d or right-click the page > click the star on the context menu, and change "Bookmarks Menu" to "Bookmarks Toolbar" and then click Done
Some users like to drag the padlock or globe from the left end of the address bar to the Bookmarks Toolbar, but if you always want the new bookmark added at the end, then this is not efficient.

Open with default options

Wondering if anyone knows how to set the default 'option' of the "Open
With" box to have this box UNchecked:
Always use the selected program to open this kind of file
By default in windows 7 this is checked. I have found docs online to
completely remove the checkbox or have it greyed out, but I would like
to have the option still there, just not checked by default.
We have had a couple different users somehow set all .exe's on their
computer to open with something like adobe..............sigh.
Stevo

Is this what you're looking for?
http://www.sevenforums.com/tutorials...unchecked.html
Looks like you have to download a registry file, but you can look at
that before installing it, to make sure there's nothing hinky in there.
Susan
Novell Community Chat Moderator
http://forums.novell.com/faq.php?faq=novfor#faq_rules
http://www.ncci.org NCCIrregulars Web Site
https://www.facebook.com/groups/NCCIrregulars
Please read the following before posting in here:
http://preview.tinyurl.com/27zopdy

No "Open with Rosetta" option for Dreamweaver 2004 MX

I have a new Intel Mini 1.66 Core Duo with 2 GB RAM and I cannot start up Dreamweaver 2004 MX 7.0.1 I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
The program DW 2004 works fine on my PowerBook G4.
Any ideas? The program did not want to install in the Intel mini, so I had to copy the install file (*.sea) over top of stuffit to get it to install.
Please help.
Thanks

I tried to use Rosetta in the "get info" link but the "open with Rosetta" does not appear as an option even though it lists the "Kind: Application (PowerPC)" The program just hangs up with a "program not responding"
This option will only appear when an application's kind is reported as being Application (Universal) and you are using an Intel Mac, as this is the only configuration which gives you the option to choose between architectures, and the checkbox only appears when running both architectures is possible with a given application on your model of Mac. If you are using a PowerPC-only application on an Intel Mac or a PowerPC or Universal application on a PowerPC Mac, only the PowerPC code can be executed, and the Open with Rosetta checkbox will not appear.
(14790)

"Open with explore" option

Hello Friends,
I am selecting a file from a library, then I go to "LIBRARY" ribbon, then to "Open with explorer"
A folder was supposed to open with all the documents that I have on that library, so that can drag and drop wherever I want. Buy instead the folder that opens is empty.
can you please suggest me, what can I do to correct this.
Many thanks.
Prajwal

Via the item drop down menu, under the title column, look for an option that's labelled "compliance details"
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Primavera P6 migrating Database to another instance with migrate.sh

I want to migrate an existing Primavera P6 Database to another instance.
What I have done so far.
I fully backed up the database with expdp and impdp, but I get an error while trying to connect with admuser (maybe because its not existing).
So I did not take more time in that.
Later I wanted to use the migrate.sh Tool which looked not that hard to do, because it only needs the credentials and Database connection Information.
The Database is large, that means over 14GB so I tried several times and the migrate.sh tool gives me after hours SQLExceptions.
So what should be the Problem?
Maybe the session time?
How to change?

Thank you for your quick reply.
Ok I will do the impdp import.
I found an db script: orpm_create_users.sql which will do the creation of all users.
But before I do that I got an error in the migrate.sh which says:
"Error in Run SQL Script orpm_ins_aux.sql : DatabaseToolException (ORA-02298: cannot validate (ADMUSER.FK_UPLIST_USESSION) - parent keys not found)
Do somebody has an idea for that?
I will post my impdp import after Ive done it...

Why are tabs on screen,of web based database, no longer opening with FireFox 16.01? Can't access secondary screens

Just downloaded newest FireFox 16.x
I am using organization specific membership database I have full access rights.
I can use main menus on the screen and open a member record but FireFox no longer opens tabbed pages (screens) inside the player record.
I am stuck on the first screen. Member record is locked onto the opening screen. TABs not working
Main menu options work, I can run reports. I just can no longer drill down into data to view or make changes.

The tabs marked by yellow arrows are no longer responsive in FireFox 16.0.1

HT204365 I opened a PDF in iBooks, but I don't know how to close it. Every time I open iBooks the PDF opens with no option to close. Any suggestions on how to get back to book shelf?

I opened a PDF in iBooks, but now I can not close it. Every time I open iBooks, the PDF is opened and I can't close it. Any suggestions on how to close it and get back to the book shelf?

Do you have an icon at the top of the page that says 'Library'? Tap that to get back. If not, just tap on the page that shows up and this should bring up the icons at the top for Library, another for the contents of the book, and the text size, search, and bookmark.

DB- put blocking when database opened with DB_READ_UNCOMMITTED

Hi,
Please excuse me if I am missing something obvious, but is there any reason why a DB->put would block just because a database file is opened with the DB_READ_UNCOMMITTED?
I am using Berkeley DB 5.1.19 and I have been having some cursors block so I have added the DB_READ_UNCOMMITTED flag to my database file opens.
With the flag on the first time I try and put a record it just blocks indefinitely. When I remove the flag the put goes through no problem.
Gerard

I have been doing some testing on this and have found the following.
(1) I open the database with a DB_READ_UNCOMMITTED flag
(2) I create a cursor with the DB_READ_UNCOMMITTED flag and read the file
(3) I close the cursor with no problems (RC=0)
(4) I try a put operation and it blocks
(5) I run db_deadlock from the command line and the put returns DB_LOCK_DEADLOCK
If I change the cursor to be opened with DB_READ_COMMITTED I get the same situation.
If I comment out the DB_READ_UNCOMMITTED from the database open put does not block (as DB_READ_UNCOMMITTED is not honored for cursor if DB_READ_UNCOMMITTED is not specified for cursor).
If I remove the DB_READ_UNCOMMITTED or DB_READ_COMMITTED from the cursor the put also does not block.
From my reading the use of DB_READ_UNCOMMITTED should reduce the chance of a deadlock not guarantee a deadlock. Is this a bug or am I missing something.
BTW, the doco for cursor open says that DB_BULK is an option but there is no DB_BULK defined in db.h.
Any help greatly appreciated.
Gerard

ORA-10827: database must be opened with MIGRATE option

Similar Messages

Maybe you are looking for