ORA-12001 : execution of 1 Job faile ORA-06512

Hello,
I am execute a procedure than run a Job of Visual Basic 6.0, the connection is with oo4o.
This code :
PROCEDURE SP_EXECUTE_PROC
DBMS_JOB.SUBMIT(n_jobnow, 'BEGIN USROWSUC.USP_PRC_VERIF_PREC; END;', SYSDATE, 'NULL');
DBMS_JOB.RUN(n_jobnow);
COMMIT;
END;
The error is the next :
ORA-12011: execution of 1 jobs failed ORA-06512: at "USROWSUC.SP_EXECUTE_PROC", line 27
ORA-06512: at line 1.
This error is only once, the next execution is ok
The database es Oracle 8.1.7.
Help me please!
Best regards,
Joseph

Why you don't call your USROWSUC.USP_PRC_VERIF_PREC procedure directly from VB? You have the same result.
VERY VERY BAD: Executing your job you will create each time a new DB-JOB.
If you want to mantain your very bad procedure try to move the commit statement after the submit call.
PROCEDURE SP_EXECUTE_PROC
DBMS_JOB.SUBMIT(n_jobnow, 'BEGIN USROWSUC.USP_PRC_VERIF_PREC; END;', SYSDATE, 'NULL');
COMMIT;
DBMS_JOB.RUN(n_jobnow);
END;Bye, Aron

Similar Messages

This job fail

Hi ,
I have scheduled a job and it failed with these errors :
Error running job 62:
ORA-12011: execution of 1 jobs failed
ORA-06512: at "SYS.DBMS_IJOB", line 406
ORA-06512: at "SYS.DBMS_JOB", line 272
ORA-06512: at line 1
what i dun understand is that procedure only has < 100 lines and the error is asking me to look at line 406 & 207 .
some info : the procedure getting data from v$sort_usage , v$session , v$sort_segment (not sure if this is an issue but when i manually run it in pl/sql it could be run with no problem but not as a scheduled job)
appreciate ur advise
tks & rdgs

I'm getting the same exact errors. I'm also new to the whole dbms_job package. I've read up a quite a bit on the syntax of the package/parameters and read some threads here, but still no joy.
Since the OP didn't post his code here's how I submitted my job:
declare
v_id number;
p_proc varchar2(2000);
begin
-- netops.run_dump_csv() is a defined procdure that takes no parameters
-- I've tried it with/without the parentheses - shown with
p_proc := 'netops.run_dump_csv()';
dbms_job.submit(job=>v_id, what=>p_proc||';', next_date=>sysdate + 1, interval=>'trunc(sysdate)+1+(1/24)');
commit;
end;
It submits fine but Oracle doesn't like it at runtime. I assume I'm passing some bad values somewhere, but darned if I can tell where. Any help anyone?
Earl
P.S. I assuming I can test this by running:
begin
dbms_job.run(2826); --2826 is the job number
end;
Message was edited by:
Earl

Import job failes with ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT

Hello everyone,
I need a help on importing data from a schema in server 1 to the same schema in server 2 via network link. I receive following error when I try to submit a job on Enterprise Manager:
Import Submit Failed
ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 5806 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7812 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8608 ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOBS", line 273 ORA-06512: at "SYSMAN.MGMT_JOBS", line 86 ORA-06512: at line 1
Sql of the job:
declare
h1 NUMBER;
begin
h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', remote_link => 'B_PROD_LINK', job_name => 'BIMPORTFRMPRDTORPT4', version => 'COMPATIBLE');
dbms_datapump.set_parallel(handle => h1, degree => 1);
dbms_datapump.add_file(handle => h1, filename => 'IMPORT.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);
dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
dbms_datapump.set_parameter(handle => h1, name => 'ESTIMATE', value => 'BLOCKS');
dbms_datapump.set_parameter(handle => h1, name => 'REUSE_DATAFILES', value => 0);
dbms_datapump.set_parameter(handle => h1, name => 'TABLE_EXISTS_ACTION', value => 'TRUNCATE');
dbms_datapump.set_parameter(handle => h1, name => 'SKIP_UNUSABLE_INDEXES', value => 0);
dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
dbms_datapump.detach(handle => h1);
end;
It says network link is active when I test the network link to make sure its connectivity. I create the network link as a system account. I'm trying to do an import from an Oracle database 10.2.0.2 to 11.2.0.1. My 10g database is on ms windows 2003x64 while my 11g database is on OEL 5.4x64.
What should I do for now?
Thank you.
Edited by: user12144220 on Nov 4, 2012 5:02 AM

It will be wise to run the Oracle supply streams health check script to check your existing streams environment.
From the result, you can also open a tar with Oracle to see if they can help you with the setup.
In addition to the ORA-01403 error, you can also run some of the Oracle Streams packages (Managing Apply Errors) to see the full detail of what is missing that caused the Ora-01403 error.
I will also try to implement a smoke test using the simple heartbeat table suggested by Oracle Streams, if that is working, then you can begin your full scale setup in your environment knowing that the base Streams Structure is setup correctly.
HTH

Export scheduler job but chain step and chain rule failed with ORA-24150 ORA-06512 during executed sql script.

Hi Folks,
I used expdp utility to export all Oracle scheduler jobs and chains with below method, after that generate sql script by impdp, later on executing sql script encountered some errors.
Only chain step and chain rule for executing script. Does anyone bright me some light? Thanks!
My env: Oracle 11g + Oracle Linux 5.5
My steps as below:
1. export(expdp) oracle scheduler job(chain)
2. generate sql script by impdp.
3. remove orginal scheduler job(chain)
4. execute sql script
5. job with no chain well but job with chain failed
[oracle@linux1 ~]$ expdp scott/tiger directory=db_dump_dir dumpfile=scott_job.dmp include=procobj:\" in $select \
> name from sys.obj$ where type\# in \(46,59,66,67,68,69,72,74,79$\)\" schemas=scott
Export: Release 11.2.0.1.0 - Production on Tue Dec 3 17:42:31 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
Starting "SCOTT"."SYS_EXPORT_SCHEMA_01": scott/******** directory=db_dump_dir dumpfile=scott_job.dmp include=procobj:" in (select name from sys.obj$ where type# in (46,59,66,67,68,69,72,74,79))" schemas=scott
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 0 KB
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
Master table "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SCOTT.SYS_EXPORT_SCHEMA_01 is:
/u03/database/usbo/BNR/dump/scott_job.dmp
Job "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully completed at 17:42:54
[oracle@linux1 ~]$ impdp scott/tiger sqlfile=scott_job.sql directory=db_dump_dir dumpfile=scott_job.dmp logfile=imp_scott_job.log
Import: Release 11.2.0.1.0 - Production on Tue Dec 3 17:43:04 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
Master table "SCOTT"."SYS_SQL_FILE_FULL_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_SQL_FILE_FULL_01": scott/******** sqlfile=scott_job.sql directory=db_dump_dir dumpfile=scott_job.dmp logfile=imp_scott_job.log
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
Job "SCOTT"."SYS_SQL_FILE_FULL_01" successfully completed at 17:43:07
[oracle@linux1 ~]$ more /u03/database/usbo/BNR/dump/scott_job.
scott_job.dmp scott_job.sql
[oracle@linux1 ~]$ more /u03/database/usbo/BNR/dump/scott_job.sql
-- CONNECT SCOTT
ALTER SESSION SET EVENTS '10150 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10904 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '25475 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10407 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10851 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '22830 TRACE NAME CONTEXT FOREVER, LEVEL 192 ';
-- new object type path: SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_1"','1=1',NULL, 'First link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_2"',':"CHAIN_STEP_1".COMPLETED = ''TRUE''',NULL, 'Second link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_3"',':"CHAIN_STEP_2".COMPLETED = ''TRUE''',NULL, 'Third link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_4"',':"CHAIN_STEP_3".COMPLETED = ''TRUE''',NULL, 'End of the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule_set('"SCHED_RULESET$1"','"SCHED_EV_CTX$1"',NULL, 0);
END;
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_1"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_1'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for first link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_3"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_3'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for last link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_2"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_2'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for second link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
, rule_set_name=>'"SCHED_RULESET$1"   '
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
COMMIT;
END;
BEGIN
dbms_scheduler.create_job('"TEST_CHAIN_1_JOB"',
job_type=>'CHAIN', job_action=>
'test_chain_1'
, number_of_arguments=>0,
start_date=>TO_TIMESTAMP_TZ('03-DEC-2013 05.38.56.718161000 PM +08:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'), repeat_interval=>
'freq=minutely; interval=2'
, end_date=>TO_TIMESTAMP_TZ('03-DEC-2013 06.08.56.000000000 PM +08:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'),
job_class=>'"DEFAULT_JOB_CLASS"', enabled=>FALSE, auto_drop=>TRUE,comments=>
NULL
COMMIT;
END;
[oracle@linux1 ~]$ export ORACLE_SID=usbo
[oracle@linux1 ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Dec 3 17:44:43 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
sys@USBO> show parameter db_name
NAME                                 TYPE                              VALUE
db_name                              string                            usbo
sys@USBO> conn scott/tiger;
Connected.
--remove job and chain.
scott@USBO> EXEC DBMS_SCHEDULER.drop_job(job_name => 'test_chain_1_job');
EXEC DBMS_SCHEDULER.drop_chain (chain_name => 'test_chain_1');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_1');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_2');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_3');
PL/SQL procedure successfully completed.
scott@USBO> @/u03/database/usbo/BNR/dump/scott_job.sql
Session altered.
Session altered.
Session altered.
Session altered.
Session altered.
Session altered.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
BEGIN
ERROR at line 1:
ORA-24150: evaluation context SCOTT.SCHED_EV_CTX$1 does not exist
ORA-06512: at "SYS.DBMS_RULEADM_INTERNAL", line 28
ORA-06512: at "SYS.DBMS_RULE_IMP_OBJ", line 40
ORA-06512: at line 3
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
PL/SQL procedure successfully completed.

Thanks all of you!
Hi DK2010,
I took some test that the data dict(dba_rule_sets/dba_evaluation_contexts) no any data returned after I had removed the job.
So I tried to create evaluation context and re-executed script(only exception setion.) the first error has gone. For the second still have some issue.
---->no any returned
scott@USBO> select * from dba_rule_sets where rule_set_owner='SCOTT';
no rows selected
scott@USBO> select * from dba_evaluation_contexts WHERE evaluation_context_owner='SCOTT';
no rows selected
-->add new EVALUATION CONTEXT
scott@USBO> exec DBMS_RULE_ADM.CREATE_EVALUATION_CONTEXT('SCOTT.SCHED_EV_CTX$1');
PL/SQL procedure successfully completed.
--->now it looks fine
scott@USBO> BEGIN
2 BEGIN
3 dbms_rule_imp_obj.import_rule_set('"SCHED_RULESET$1"','"SCHED_EV_CTX$1"',NULL, 0);
4 END;
5
6 COMMIT;
7 END;
8 /
PL/SQL procedure successfully completed.
--->add new rule set, it prompt aleady exists
scott@USBO> exec DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1')
BEGIN DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1'); END;
ERROR at line 1:
ORA-24153: rule set SCOTT.SCHED_RULESET$1 already exists
ORA-06512: at "SYS.DBMS_RULEADM_INTERNAL", line 28
ORA-06512: at "SYS.DBMS_RULE_ADM", line 138
ORA-06512: at line 1
-->chain rule still could not find.
scott@USBO> @job_chain_rules.sql
no rows selected
-->rerun
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-27477: "SCOTT.TEST_CHAIN_1" already exists
ORA-06512: at "SYS.DBMS_ISCHED", line 1148
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1598
ORA-06512: at line 2
-->drop chain
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1');
BEGIN dbms_scheduler.drop_chain('TEST_CHAIN_1'); END;
ERROR at line 1:
ORA-27479: Cannot drop "SCOTT.TEST_CHAIN_1" because other objects depend on it
ORA-06512: at "SYS.DBMS_ISCHED", line 1319
ORA-06512: at "SYS.DBMS_ISCHED", line 1222
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1854
ORA-06512: at line 1
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1',force=>TRUE);
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist   --->still returned no rule set
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
scott@USBO> exec DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1')
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-27477: "SCOTT.TEST_CHAIN_1" already exists
ORA-06512: at "SYS.DBMS_ISCHED", line 1148
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1598
ORA-06512: at line 2
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1',force=>TRUE);
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
Would you like to give me more clue?
Thanks again.

Impdump fails with ORA-06512: at "SYS.KUPW$WORKER", line 6345

Hi All,
We are trying to import a data from PROD to test using datapump utility.
Its is failing with the below error.
Import: Release 10.2.0.4.0 - 64bit Production on Friday, 01 July, 2011 11:32:12
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYS"."SYS_IMPORT_SCHEMA_02" successfully loaded/unloaded
Starting "SYS"."SYS_IMPORT_SCHEMA_02": /******** AS SYSDBA remap_tablespace=FCATDB:USERS SCHEMAS=FCATDB:FCATDB directory=EXPDP_DIR dumpfile=expdp_fcatdb.dmp logfile=probin1.log
Processing object type SCHEMA_EXPORT/USER
ORA-39083: Object type USER failed to create with error:
ORA-02380: profile BOB does not exist
Failing sql is:
CREATE USER "FCATDB" IDENTIFIED BY VALUES '57433E901EB2CA43' DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" PROFILE "BOB"
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT SELECT ANY SEQUENCE TO "FCATDB"
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT CREATE SYNONYM TO "FCATDB"
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT SELECT ANY TABLE TO "FCATDB"
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT UNLIMITED TABLESPACE TO "FCATDB"
Processing object type SCHEMA_EXPORT/ROLE_GRANT
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT "CONNECT" TO "FCATDB"
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT "RESOURCE" TO "FCATDB"
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT "DBA" TO "FCATDB"
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39083: Object type DEFAULT_ROLE failed to create with error:
ORA-01918: user 'FCATDB' does not exist
Failing sql is:
ALTER USER "FCATDB" DEFAULT ROLE ALL
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
ORA-39083: Object type PROCACT_SCHEMA failed to create with error:
ORA-31625: Schema FCATDB is needed to import this object, but is unaccessible
ORA-01435: user does not exist
Failing sql is:
BEGIN
sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'BOBL_PRO', inst_scn=>'71243687320');COMMIT; END;
Processing object type SCHEMA_EXPORT/SYNONYM/SYNONYM
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACPKS_MISC" FOR "BOB"."ACPKS_MISC"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACTBS_ACCBAL_HISTORY" FOR "ACTBS_ACCBAL_HISTORY"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACTBS_ACCSTATS_PTD" FOR "ACTBS_ACCSTATS_PTD"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACVWS_ALL_AC_ENTRIES" FOR "ACVWS_ALL_AC_ENTRIES"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTBS_CONTRACT_PARTIES" FOR "BCTBS_CONTRACT_PARTIES"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTB_CONTRACT_MASTER" FOR "BCTB_CONTRACT_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTMS_DOCS_MASTER" FOR "BCTMS_DOCS_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTM_PRODUCT_MASTER" FOR "BCTM_PRODUCT_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCVW_REPORTS" FOR "BCVW_REPORTS"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CATMS_CHECK_BOOK" FOR "CATMS_CHECK_BOOK"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTBS_CONTRACT_CHARGES" FOR "CFTBS_CONTRACT_CHARGES"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTBS_CONTRACT_INTEREST" FOR "CFTBS_CONTRACT_INTEREST"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_FLOAT_RATE_DETAIL" FOR "CFTMS_FLOAT_RATE_DETAIL"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_FLOAT_RATE_MASTER" FOR "CFTMS_FLOAT_RATE_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_PRODUCT_CHARGE" FOR "CFTMS_PRODUCT_CHARGE"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_PRODUCT_ICCF" FOR "CFTMS_PRODUCT_ICCF"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_PRODUCT_INTEREST" FOR "CFTMS_PRODUCT_INTEREST"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_RATE_CODE" FOR "CFTMS_RATE_CODE"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTM_RATE_CODE" FOR "CFTM_RATE_CODE"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CHKHOL_AND_GET_NEXTWDAY" FOR "FN_CHKHOL_AND_GET_NEXTWDAY"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CLTBS_ACCOUNT_MASTER" FOR "CLTBS_ACCOUNT_M
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA_HISTORY" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA_HISTORY" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA_HISTORY" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."DAILYTXNAMT" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."FCATFLEXMLAUDITLOG" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTALERTNOTIFIER" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTALERTNOTIFIER" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTALERTNOTIFIER" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTINITAUTHTYPES" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTPERSONALCUST" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTTXN" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."TXN_TEMP_MSTCORPORATE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."TXN_TEMP_MSTCORPORATE" creation failed
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.PUT_DDL [FUNCTION:"FCATDB"."FN_CHKHOL_AND_GET_NEXTWDAY"]
ORA-44001: invalid schema
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6345
----- PL/SQL Call Stack -----
object line object
handle number name
c000000224567298 15032 package body SYS.KUPW$WORKER
c000000224567298 6372 package body SYS.KUPW$WORKER
c000000224567298 12800 package body SYS.KUPW$WORKER
c000000224567298 12080 package body SYS.KUPW$WORKER
c000000224567298 3346 package body SYS.KUPW$WORKER
c000000224567298 6972 package body SYS.KUPW$WORKER
c000000224567298 1314 package body SYS.KUPW$WORKER
c00000022c7210b8 2 anonymous block
Job "SYS"."SYS_IMPORT_SCHEMA_02" stopped due to fatal error at 11:32:41
Please help me on this.
Db version : 10.2.0.4
Os : HP-UX.
Thanks and Regards,

ORA-01917: user or role 'FCATDB' does not existError: ORA 1917
Text: user or role <name> does not exist
Cause: An invalid user or role name was specified.
Action: Check that a valid user or role name is used.
If you are using IMPDP then no need to mention the user name, if the user is different then you can use remap_schema option,
If dumpfile has only one schema then no need to mention the clause SCHEMAS also.
change as SCHEMAS=FCATDB instead of SCHEMAS=FCATDB:FCATDB
impdp /******** AS SYSDBA remap_tablespace=FCATDB:USERS SCHEMAS=FCATDB directory=EXPDP_DIR dumpfile=expdp_fcatdb.dmp logfile=probin1.log

ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-10700: preference does not exist: global_lexer ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

database version 11.2.0.4
rac two node
CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
(DESCRIPTION)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('lexer global_lexer language column LANGCODE')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

Like the error message says, you don't have a global_lexer. So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters. Please see the demonstration below, including reproduction of the error and solution.
SCOTT@orcl12c> -- reproduction of problem:
SCOTT@orcl12c> CREATE TABLE actci
2    (description VARCHAR2(60),
3      langcode     VARCHAR2(30))
4 /
Table created.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
SCOTT@orcl12c> -- solution:
SCOTT@orcl12c> DROP INDEX actci_ndx3
2 /
Index dropped.
SCOTT@orcl12c> BEGIN
2    CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
3    CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
4    CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
5 END;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
Index created.

SQL Server Agent job fails with error : The package execution returned DTSER_FAILURE (1).

Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.

The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

OWB Repository creation failed at the end with ORA-01403 & ORA-06512

I got the below error during the OWB Repository Creation on RAC Database which is newly created(11.2.0.3)
=========================================
java.lang.Exception: The workspace user installation failed on user(s):
owb_cdr:
java.lang.Exception: ORA-01403: no data found
ORA-06512: at "OWBSYS.GETROLESTARTED", line 31
ORA-06512: at line 1
=========================================
I was checking this MOM: OWB Design Client Fails to Connect to Repository With ORA-06512: at "OWBSYS.GETROLESTARTED" (Doc ID 1355764.1)
But why this is happening for first time as this is a Fresh database.
Can anyone help on this??? Any workaround for this issue?

I got the below error during the OWB Repository Creation on RAC Database which is newly created(11.2.0.3)
=========================================
java.lang.Exception: The workspace user installation failed on user(s):
owb_cdr:
java.lang.Exception: ORA-01403: no data found
ORA-06512: at "OWBSYS.GETROLESTARTED", line 31
ORA-06512: at line 1
=========================================
I was checking this MOM: OWB Design Client Fails to Connect to Repository With ORA-06512: at "OWBSYS.GETROLESTARTED" (Doc ID 1355764.1)
But why this is happening for first time as this is a Fresh database.
Can anyone help on this??? Any workaround for this issue?

ORA-12012: error on auto execute of job 754461 ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, parameters in command "RCPT TO:" unrecognized or missing ORA-06512: at "SYS.UTL_SMTP", line 20 ORA-06512: at "SYS.UTL_SMTP",

Hi ,
I am getting below error frequently in alert log of database.
ORA-12012: error on auto execute of job 754461
ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, parameters in command "RCPT TO:" unrecognized or missing
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at "APPS.EIS_UTIL_PKG", line 94
ORA-06512: at "APPS.HKD_PO_ADDON_PKG", line 110
ORA-06512: at line 1

You have a job running in the database. Its job ID is 754461
It looks as if that job runs APPS.HKD_PO_ADDON_PKG
That job is attempting to send mail using UTL_SMTP and apparently passing some strange value to SMTP server for the RCPT TO: parameter.

Export dump failing with ora -06512 and ORA-00955

Hi
While running export data pump, I am getting this error. Any inputs helps ... Thanks in advance.
Regards,
K
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-31626: job does not exist
ORA-31633: unable to create master table "OPS$ORACLE.EXPFULL"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 863
ORA-00955: name is already used by an existing object

You may have to drop the table OPS$ORACLE.EXPFULL and then try again.
HTH
Thanks
Chandra

Worker fails when running MSDODPCODE.sql causing ORA-33290 and ORA-06512

Hi All,
Hopefully somebody can help / point me in the right direction. I'm testing the process of upgrading our R12.0.5 Financials (Database 10.2.0.4) to R12.1.3 and have hit a problem when applying the 12.1.1 Maintenance Pack.
The worker has failed with the following in it's log file.
"sqlplus -s APPS/***** @/u01/app/applmgr/CGSYSTST/apps/apps_st/appl/msd/12.0.0/patch/115/sql/MSDODPCODE.sql
begin
ERROR at line 1:
ORA-33290: Analytic workspace ODPCODE cannot be attached in the mode you requested because another user has it attached in an incompatible mode.
ORA-06512: at "SYS.DBMS_AW", line 67
ORA-06512: at "SYS.DBMS_AW", line 131
ORA-06512: at "SYS.DBMS_AW", line 792
ORA-06512: at "SYS.DBMS_AW", line 767
ORA-06512: at "APPS.MSD_AW_LOADER", line 10
ORA-06512: at line 3"
It might be worth noting that I also hit the same problem when testing RUP 6 for R12.0.6 - it was partially because of this that I decided to scrap going to 12.0.6 1st and go straight to R12.1.3 - making it a much bigger upgrade.
Thanks
Andy

Hi Taher,
1st few lines from /u01/app/oracle/CGSYSTST/db/tech_st/10.2.0/admin/CGSYSTST_trinity/udump/cgsystst_ora_7942.trc are....
Dump file /u01/app/oracle/CGSYSTST/db/tech_st/10.2.0/admin/CGSYSTST_trinity/udump/cgsystst_ora_7942.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options ORACLE_HOME = /u01/app/oracle/CGSYSTST/db/tech_st/10.2.0
System name: Linux
Node name: TRINITY
Release: 2.6.16.60-0.39.3-smp
Version: #1 SMP Mon May 11 11:46:34 UTC 2009
Machine: x86_64
Instance name: CGSYSTST
Redo thread mounted by this instance: 1
Oracle process number: 17
Unix process pid: 7942, image: oracle@TRINITY
*** ACTION NAME:() 2011-03-07 12:07:03.718
*** MODULE NAME:(SQL*Plus) 2011-03-07 12:07:03.718
*** SERVICE NAME:(CGSYSTST) 2011-03-07 12:07:03.718
*** SESSION ID:(341.32826) 2011-03-07 12:07:03.718 Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x2af815d5ce17, PC: [0x2af713076608, intelfast_memcpy.A()+10]
*** 2011-03-07 12:07:03.718
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [_intel_fast_memcpy.A()+10] [SIGSEGV] [Address not mapped to object] [0x2AF815D5CE17] [] [] Current SQL statement for this session:
begin
-- attach code aw
msd_aw_loader.attach_code_aw;
-- create temp marker variable to prevent individual scripts from updating
dbms_aw.execute('define _noupdate session boolean'); end;
Andy

ORA-06502/ORA-06512 at execution owa_util.mime_header

Hi, APEX gurus!
I try to write a procedure to display bfile contention /images/ into APEX page.
I have a table :
-TEMP_FLAGS (ID NUMBER(3) NOT NULL, NAME BFILE)
- procedure display_country_flags_bfile
display_country_flags_bfile (p_id NUMBER) is
CURSOR c_flags(p_flag NUMBER) IS
SELECT name
FROM temp_flags_bfile
WHERE id = p_flag;
r_flags c_flags%ROWTYPE;
v_bfile bfile;
lgh_file number;
v_dir_alias varchar2(256);
v_filename varchar2(256);
v_mime varchar2(255);
begin
open c_flags(p_id);
fetch c_flags INTO r_flags;
CLOSE c_flags;
v_bfile := r_flags.name;
dbms_lob.filegetname(v_bfile, v_dir_alias, v_filename);
lgh_file := dbms_lob.getlength(v_bfile);
Dbms_Lob.Fileopen(v_bfile, Dbms_Lob.File_Readonly);
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
htp.p('Content-length: '||lgh_file);
htp.p('Content-Disposition: attachment; filename="'||v_filename||'"');
owa_util.http_header_close;
wpg_docload.download_file(v_bfile);
Dbms_Lob.Fileclose(v_bfile);
end display_country_flags_bfile;
If i execute directly in Toad i get error below:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.OWA_UTIL", line 354
ORA-06512: at "SYS.OWA_UTIL", line 413
ORA-06512: at "STAT.DISPLAY_COUNTRY_FLAGS_BFILE", line 20
ORA-06512: at line 1
In Report attributes of APEX page, i use HTML expression to populate column value as call this procedure with appropriate parameter but image just not showing.
I appreciate any help and opinion.
P.S. I'm a newbie in APEX and have minimal experience.
P.S.2 I forgot - Oracle 10g XE and APEX 2.1 built-in
Thanks, Rado
Edited by: user7637288 on 16-Dec-2008 05:12

Thanks, rafix.
But i'm using Oracle XE with storage limit /1GB/ and i don't want store any images in database. I prefer to use bfile type with link to files on OS level.
By the way , just for tests, i try to use blobs on my own table with simular procedure, which throws the same error - with owa_util.mime_header. And think that the problem is related to owa_util package.
My APEX version is 2.1 - built-in in Oracle XE, not 3.1

DBMS_LDAP call fails with ORA-06512 Error Mapping function

Hi,
I am facing a problem with workflow integration with LDAP.
I receive
ORA-6512 Error Mapping Function on one particular line within the WF_LDAP.get_cfg_val procedure.
WHILE my_entry IS NOT NULL
LOOP
my_vals := DBMS_LDAP.get_values (p_session,
my_entry,
p_name);
The documentation says:
ORA-06521 PL/SQL: Error mapping function
Cause: An error was detected by PL/SQL trying to map the mentioned
function dynamically.
Action: Check the stacked error (if any) for more details.
This is the trace of the error:
ORA-06521 PL/SQL Error mapping Function
ORA-06512 at SYS.DBMS_LDAP_API_FFI line 0
ORA-06512 at SYS.DBMS_LDAP line 1332
ORA-06512 at SYS.DBMS_LDAP line 1302
ORA-06512 at SYS.DBMS_LDAP line 582
This is the header of the catldap.sql file
Rem
Rem $Header: catldap.sql 07-jan-2000.19:15:20 akolli Exp $
Rem
Rem catldap.sql
Rem
Rem $Header: dbmsldap.sql 14-dec-2001.23:25:22 rbollu Exp $
Rem
Rem dbmsldap.sql
Rem
This is the output while running it (No errors):
Library created.
Package created.
Package created.
Package created.
Package body created.
Package body created.
Package body created.
Synonym created.
Grant succeeded.
Synonym created.
Grant succeeded.
Database is :
compatible 9.2.0.0.0
Am I missing something?
I have searched all the forums and although there are many references to "Error Mapping Function", noone has reported it in the context of WF - LDAP Integration. So I am not sure how to proceed.
Please help.
thanks in advance,
Libin

Hi Libin,
Can you please explain to me the parameters that you put in the Global Preferences, the LDAP_port,LDAP_user,and the others, because I don�t know where I need to search in the server this parameters and I don�t understand su much of OID.
if you can give to me and little description of that parameters,this would thank for much.
anticipated thanks
Arlet

Invoice Validation Error ORA-06512: at "APPS.AP_APPROVAL_PKG", line 111124

All,
I am getting below error message from log file after Invoice Validation program error out, please advise.
I could not search on "ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124" search, but found other errors and able to see we are very much higher file version than the note id advised.
Please help any one for this issue.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APPRVL module: Invoice Validation
Current system time is 01-MAR-2013 03:40:12
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_option='All'
p_inv_start_date='2013/02/01 00:00:00'
p_inv_end_date='2013/02/28 00:00:00'
p_trace_flag='N'
p_commit_size='1000'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00101: Error occured in BATCH_APPROVAL()
MSG-00102: Error Code : -20001
MSG-00103: Error Message : ORA-20001:
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
MSG-00000: When Others:User-Defined Exception
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00101: Error occured in BATCH_APPROVAL()
MSG-00102: Error Code : -20001
MSG-00103: Error Message : ORA-20001:
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
MSG-00000: When Others:User-Defined Exception
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Fri Mar 1 03:40:15 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 42770000.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 01-MAR-2013 04:06:57
---------------------------------------------------------------------------

Please post the details of the application release, database version and OS.
Please also see these docs.
Invoice Validation (APPRVL) Errors Out With ORA-20001: APP-SQLAP-10000: ORA-00060 [ID 1460249.1]
R12: Invoice Validation Is Failing When Running With Parameter 'ALL' [ID 1115016.1
R12 Payables Invoice Validation Error: Unexpected error occurred during Tax Calculation. [ID 961182.1
Ap Invoice Validation Errors: P-1419: Msg-00101: Error Occured In Batch_approval [ID 1140828.1]
Invoice Validation Error : REP-1419:ERROR OCCURED IN BATCH_APPROVAL() [ID 1120213.1]
R12: Validate Invoice Errors APP-SQLAP-10000, ORA-01403 and ORA-20001 [ID 1308869.1]
Thanks,
Hussein

Getting ORA-06512: at "SYS.UTL_HTTP", line 1022 ORA-29270: too many open

hi
I am getting the following error while calling the procedure in the batch process
ORA-06512: at "SYS.UTL_HTTP", line 1022
ORA-29270: too many open HTTP requests
Could you please help me on this? As this is getting affected in the live databases.
ORA-06512: at "SYS.UTL_HTTP", line 1022
ORA-29270: too many open HTTP requests
CREATE OR REPLACE PROCEDURE Send_To_Spg(
PTRANSACTION_ID               IN          VARCHAR2,
PCHANNEL_TYPE               IN VARCHAR2 DEFAULT NULL,
PCSS_ORDER_NUMBER          IN VARCHAR2 DEFAULT NULL,
PTELEPHONE_NUMBER          IN VARCHAR2 DEFAULT NULL,
PSCENARIO_TYPE               IN VARCHAR2 DEFAULT NULL,
PCUSTOMER_REQUIRED_DATE IN          VARCHAR2 DEFAULT NULL,
PCUSTOMER_REQUIRED_TIME IN          VARCHAR2 DEFAULT NULL,
PCANCELLATION_REASON     IN          VARCHAR2 DEFAULT NULL,
PCANCELLATION_NOTES          IN          VARCHAR2 DEFAULT NULL,
PSMPF_RETENTION               IN          VARCHAR2 DEFAULT NULL,
PEMERGENCY_WINBACK          IN          VARCHAR2 DEFAULT NULL,
PCSS_PROJECT_ID               IN          VARCHAR2 DEFAULT NULL,
PCSS_ORDER_NOTES          IN          VARCHAR2 DEFAULT NULL,
PREASON_FOR_CESSATION     IN          VARCHAR2 DEFAULT NULL,
P_RESPONSE                    OUT VARCHAR2,
PSMART_USER_ID               IN VARCHAR2 DEFAULT NULL,
PORACLE_ERROR               OUT VARCHAR2,
PORACLE_ERROR_MESSAGE     OUT          VARCHAR2,
PRESPONSE_TIME               OUT          NUMBER,
PDATA_TRANSFER_STATUS     OUT          VARCHAR2)
IS
v_scenario_type               VARCHAR2(20); -- Varialble to Hold Time Out of every request to SPG
v_transaction_time          NUMBER;          -- Total time in which Request to SPG was processed
v_record_inserted_at     DATE;          -- Date/Time about the record insertion to the Error Handler
v_start_time               NUMBER;          -- Variable to hold Start Time for calculationg Transaction Time
v_url                         VARCHAR2(32767);-- URL to use when sending data to SPG
vtransaction_id               VARCHAR2(18); -- Variable to hold Transaction ID for the request
v_buffer                    VARCHAR2(32760);-- Variable to read response from the SPG interface
v_timeout                    PLS_INTEGER; -- Time Out for each Transaction
v_oracle_err_msg          VARCHAR2(600); -- Variable to hold Oracle Error Message
v_resp                UTL_HTTP.RESP; -- Response Object
v_req                UTL_HTTP.REQ; -- Request Object
v_userid_pwd               SMT_ORACLE_PARAMETERS%ROWTYPE; --Variable declared to contain User ID & Password
vl_RetCode          VARCHAR2(5000);
vl_std_returnCode     VARCHAR2(3000);
--PDATA_TRANSFER_STATUS Holds the Data Transfer Status which can have possible values as
-- N => Data Has not been sent to SPG
-- Y => Received Successful response from SPG
-- F => On the First try to Send data to SPG Oracle Error Occured or response from SPG was a faulure
-- S => On the Second try to Send data to SPG Oracle Error Occured or response from SPG was a faulure
-- T => Data Has been transferred to the Error Log Table
-- X => Data need not be transfered to Error Log Table.
--Location of the timeout, URL & User Id & Password in Standing Data.
c_url_stopwlr SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_WLR';-- Stop WLR URL
c_url_cancelown SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_OWN';-- Cancel own URL
c_url_cancelother SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_OTH';-- Cancel other URL
c_url_amendcrd SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_CRD';--Amend CRD URL
c_spg_useridpwd SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPGIDPWD'; --Contains user id and pwd
ctimeout smt_parameters.parameter_code%TYPE:='SPGTO'; --This holds the timeout parameter
BEGIN
     --In case the calling batch process can pass this value this SQL read will not be required & can be deleted
     --Read data transfer status for the transaction Id
     SELECT data_transfer_status INTO PDATA_TRANSFER_STATUS     FROM SPG_INTERFACE_TABLE
     WHERE transaction_id     =     PTRANSACTION_ID;
     --Record the start time
     v_start_time:=DBMS_UTILITY.GET_TIME;
     --If Data transfer status is S then send the record to error handler
     IF PDATA_TRANSFER_STATUS = 'S' THEN
          Error_Handler(PTRANSACTION_ID,PSMART_USER_ID,PORACLE_ERROR,PORACLE_ERROR_MESSAGE,v_record_inserted_at,PDATA_TRANSFER_STATUS);
     ELSE
     --In case Data Tranfer Status is something other than S then send the request to SPG
          --Initialise other variables which will be populated during the journey
          P_RESPONSE                    :=     '';
          PORACLE_ERROR               :=     NULL;
          PORACLE_ERROR_MESSAGE     :=     NULL;
          PRESPONSE_TIME               :=     0;
     --Read timeout parameter from standing data.
          BEGIN
               SELECT VALUE INTO v_timeout FROM smt_parameters WHERE parameter_code=ctimeout;
          EXCEPTION
               WHEN NO_DATA_FOUND THEN
               v_timeout:=30;
          WHEN OTHERS THEN
               v_timeout:=30;
          END;
     -- Construct the URL for Stop WLR Scenario
          IF PSCENARIO_TYPE = 'STOP_WLR' THEN
               BEGIN
               -- Read the Initial URL from Standing Data
               SELECT VALUE
                    INTO v_url
                    FROM SMT_ORACLE_PARAMETERS
                    WHERE parameter_code = c_url_stopwlr
                    AND host_id = ( SELECT host_id
                                                  FROM SMART_HOSTS A
                                                  WHERE EXISTS ( SELECT 1
                                                                 FROM DB_PARAMETERS b
                                                                 WHERE A.hostname = b.hostname
                                                                 AND A.database_id = b.database_id));
               --handle unforseen exception
               EXCEPTION
               WHEN NO_DATA_FOUND THEN
                    v_url:='Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_winback_details'; --After testing the same, URL will be fetched from the Query
               WHEN OTHERS THEN
                    v_url:='Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_winback_details'; --After testing the same, URL will be fetched from the Query
               END;
               --construct the URL depending on the parameters to be passed to the url
               v_url := v_url || '?';
               v_url := v_url || 'p_data_entered=' || Smart_Urlencode('xmloverhttp') || '&';
               v_url := v_url || 'p_channel_type=' || Smart_Urlencode(PCHANNEL_TYPE)|| '&';
               v_url := v_url || 'p_css_start_order_no=' || Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
               v_url := v_url || 'p_tel_no=' || Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
               v_url := v_url || 'p_crd=' || Smart_Urlencode(PCUSTOMER_REQUIRED_DATE)|| '&';
               v_url := v_url || 'p_take_over_time=' || Smart_Urlencode(PCUSTOMER_REQUIRED_TIME)|| '&';
               v_url := v_url || 'p_retainsmpf=' || Smart_Urlencode(PSMPF_RETENTION)|| '&';
               --v_url := v_url || 'p_emergency_winback='                    || Smart_Urlencode(PEMERGENCY_WINBACK)|| '&';
               v_url := v_url || 'p_projectno=' || Smart_Urlencode(PCSS_PROJECT_ID)|| '&';
               v_url := v_url || 'p_ordernotes=' || Smart_Urlencode(PCSS_ORDER_NOTES)|| '&';
               v_url := v_url || 'p_reason_cessation=' || Smart_Urlencode(PREASON_FOR_CESSATION);
          ELSIF PSCENARIO_TYPE='CANCEL_OWN' THEN
          --Fetch the URL for cancel own from standing data.
               BEGIN
                    SELECT VALUE
                    INTO v_url
                    FROM SMT_ORACLE_PARAMETERS
                    WHERE parameter_code = c_url_cancelown
                    AND host_id = ( SELECT host_id
                                                  FROM SMART_HOSTS A
                                                  WHERE EXISTS ( SELECT 1
                                                                 FROM DB_PARAMETERS b
                                                                 WHERE A.hostname = b.hostname
                                                                 AND A.database_id = b.database_id));
          --handle unforseen exception
               EXCEPTION
                         WHEN NO_DATA_FOUND THEN
                         v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelown_details'; --After testing the same, URL will be fetched from the Query
               WHEN OTHERS THEN
                         v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelown_details'; --After testing the same, URL will be fetched from the Query
               END;
          --construct the URL
          v_url := v_url || '?';
          v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
          v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
          v_url := v_url || 'p_css_start_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
          v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
          v_url := v_url || 'p_cancel_reason=' ||Smart_Urlencode(PCANCELLATION_REASON)|| '&';
          v_url:= v_url || 'p_cancel_notes=' ||Smart_Urlencode(PCANCELLATION_NOTES);
          ELSIF PSCENARIO_TYPE='CANCEL_OTHER' THEN
          --Fetch the URL for cancel own from standing data.
          BEGIN
          SELECT VALUE
                    INTO v_url
                    FROM SMT_ORACLE_PARAMETERS
                    WHERE parameter_code = c_url_cancelother
                    AND host_id = ( SELECT host_id
                                                  FROM SMART_HOSTS A
                                                  WHERE EXISTS ( SELECT 1
                                                                 FROM DB_PARAMETERS b
                                                                 WHERE A.hostname = b.hostname
                                                                 AND A.database_id = b.database_id));
          --handle unforseen exception
          EXCEPTION
               WHEN NO_DATA_FOUND THEN
                    v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelother_details'; --After testing the same, URL will be fetched from the Query
               WHEN OTHERS THEN
                    v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelother_details'; --After testing the same, URL will be fetched from the Query
          END;
          --construct the URL
          v_url := v_url || '?';
          v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
          v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
          v_url := v_url || 'p_css_stop_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
          v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
          v_url := v_url || 'p_cancel_reason=' ||Smart_Urlencode(PCANCELLATION_REASON);
          ELSIF Pscenario_type='AMEND_CRD' THEN
          --Fetch the URL for cancel own from standing data.
          BEGIN
          SELECT VALUE
                    INTO v_url
                    FROM SMT_ORACLE_PARAMETERS
                    WHERE parameter_code = c_url_amendcrd
                    AND host_id = ( SELECT host_id
                                                  FROM SMART_HOSTS A
                                                  WHERE EXISTS ( SELECT 1
                                                                 FROM DB_PARAMETERS b
                                                                 WHERE A.hostname = b.hostname
                                                                 AND A.database_id = b.database_id));
          --handle unforseen exception
          EXCEPTION
          WHEN NO_DATA_FOUND THEN
               v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_amendcrd_details'; -- After testing the same , URL will be fetched from the Query
          WHEN OTHERS THEN
               v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_amendcrd_details'; -- After testing the same , URL will be fetched from the Query
          END;
          --construct the URL
          v_url := v_url || '?';
          v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
          v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
          v_url := v_url || 'p_css_start_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
          v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
          v_url := v_url || 'p_crd='                         ||Smart_Urlencode(PCUSTOMER_REQUIRED_DATE)|| '&';
          v_url := v_url || 'p_css_change_order_numbers='||Smart_Urlencode(PCANCELLATION_REASON);
          END IF;
          --this is start of setting parameters for utl http object. the show begins...
          utl_http.set_transfer_timeout(v_timeout);
          --Set the wallet
          --XXXXX e.g.UTL_HTTP.SET_WALLET(?file:DirectoryPath?,'put password here?);
          --Set proxy
          --YYYYY e.g. utl_http.set_proxy(p_proxy_in, p_no_proxy_domains_in);
          v_url := REPLACE(v_url,'%27%27','%27'); -- Fix to ensure Double Quotes are converted to Single Quotes
          --set the required URL to utl http.
          v_req := utl_http.begin_request(v_url);
          --Authentication setting
          --Fetch the user id and password from stnding data.
          BEGIN
               SELECT *
                    INTO v_userid_pwd
                    FROM SMT_ORACLE_PARAMETERS
                    WHERE PARAMETER_CODE=c_spg_useridpwd
                    AND HOST_ID = ( SELECT HOST_ID
                                        FROM SMART_HOSTS A
                                        WHERE EXISTS ( SELECT 1
                                                            FROM DB_PARAMETERS B
                                                            WHERE A.HOSTNAME = B.HOSTNAME
                                                            AND A.DATABASE_ID = B.DATABASE_ID));
          EXCEPTION
               WHEN NO_DATA_FOUND THEN
               P_RESPONSE := 'ORACLE_ERROR: USER id AND Password NOT configured IN SMT_ORACLE_PARAMETERS:SPGIDPWD';
               WHEN OTHERS THEN
               P_RESPONSE := 'ORACLE_ERROR: USER id AND Password NOT configured IN SMT_ORACLE_PARAMETERS:SPGIDPWD';
          END;
          --utl_http.set_authentication(v_req, p_username_in, p_password_in);
          utl_http.set_authentication(v_req, v_userid_pwd.description, v_userid_pwd.VALUE);
          v_resp := utl_http.get_response(v_req);
          --Fill in the the response time
          PRESPONSE_TIME := (DBMS_UTILITY.GET_TIME - v_start_time)/100;
          IF v_resp.reason_phrase = 'OK' THEN
               -- Fetch the response
               BEGIN
                    LOOP
                    utl_http.read_line(v_resp, v_buffer);
                         P_RESPONSE := P_RESPONSE || v_buffer;
                    END LOOP;
                         utl_http.end_response(v_resp);
                    EXCEPTION
                    WHEN utl_http.end_of_body THEN
                    utl_http.end_response(v_resp);
                    P_RESPONSE := P_RESPONSE || v_buffer;
               END;
          ELSIF v_resp.reason_phrase <> 'OK' OR P_RESPONSE = '' THEN
               --error handling starts
               --If the HTTP Status is not OK then store the error information
               PORACLE_ERROR_MESSAGE     :=     'Status Code: '|| v_resp.STATUS_CODE||'. Reason Phrase ' ||v_resp.reason_phrase;
               P_RESPONSE                    :=     'ORACLE_ERROR: '||     ' Reason Phrase ' ||     v_resp.reason_phrase;
               PORACLE_ERROR               :=     v_resp.STATUS_CODE;
          END IF;
          --In case we got successful response from SPG
          IF P_RESPONSE LIKE '%<RetCde>0</RetCde>%' THEN
               PDATA_TRANSFER_STATUS     :=     'Y';
          ELSE
               BEGIN
SELECT message
                              INTO vl_std_returnCode
                              FROM SMT_MESSAGES
                              WHERE MESSAGE_CODE='SPGANTIDTS';
EXCEPTION
WHEN NO_DATA_FOUND THEN
     vl_std_returnCode := '-12545,-29273,-1,401,';
WHEN OTHERS THEN
                    vl_std_returnCode := '-12545,-29273,-1,401,';
END;
               --In case there was an error do not update Data Transfer Status
               IF PORACLE_ERROR <> NULL AND INSTR(vl_std_returnCode, PORACLE_ERROR || ',', 1, 1) <> 0 THEN
                         PDATA_TRANSFER_STATUS:=PDATA_TRANSFER_STATUS;
               ELSE
                    vl_RetCode := SUBSTR(P_RESPONSE, INSTR(P_RESPONSE,'<RetCde>', 1, 1),
                    INSTR(P_RESPONSE,'</RetCde>',1,1)+9 - INSTR(P_RESPONSE,'<RetCde>', 1, 1));
                    BEGIN
                         SELECT VALUE
                              INTO vl_std_returnCode
                              FROM SMT_ORACLE_PARAMETERS
                              WHERE PARAMETER_CODE='SPGRCS'
                              AND HOST_ID = ( SELECT HOST_ID
                                   FROM SMART_HOSTS A
                                   WHERE EXISTS ( SELECT 1
                                                       FROM DB_PARAMETERS B
                                                       WHERE A.HOSTNAME = B.HOSTNAME
                                                       AND A.DATABASE_ID = B.DATABASE_ID));
               EXCEPTION
                    WHEN NO_DATA_FOUND THEN
                         vl_std_returnCode := '<RetCde>4244</RetCde><RetCde>4245</RetCde><RetCde>4246</RetCde>';
                    WHEN OTHERS THEN
                         vl_std_returnCode := '<RetCde>4244</RetCde><RetCde>4245</RetCde><RetCde>4246</RetCde>';
                    END;
                    IF INSTR(vl_std_returnCode, vl_RetCode, 1, 1) <> 0 THEN
                         --needs not to re attempted.
                         PDATA_TRANSFER_STATUS:='X';
                    ELSE
                         --In case we did'nt got SUCCESSFUL response FROM SPG THEN UPDATE the Data Transfer Status so that the failed requests can be picked up BY the NEXT batch job RUN
                         IF PDATA_TRANSFER_STATUS='N' THEN
                              --initially if data transfer status was N then update it now to F
                              PDATA_TRANSFER_STATUS     :=     'F';
                         ELSIF PDATA_TRANSFER_STATUS='F' THEN
                              --initially if data transfer status was N then update it now to S
                              PDATA_TRANSFER_STATUS     :=     'S';
                         END IF;
                    END IF;
               END IF;
          END IF;
          --Now Update all the modified Values
     UPDATE SPG_INTERFACE_TABLE
               SET     response          =     P_RESPONSE,
               data_transfer_status     =     PDATA_TRANSFER_STATUS,
               oracle_error               =     PORACLE_ERROR,
               oracle_error_message     =     PORACLE_ERROR_MESSAGE,
               response_time               =     PRESPONSE_TIME
               WHERE transaction_id     =     PTRANSACTION_ID;
          COMMIT;
END IF;
EXCEPTION
     WHEN OTHERS THEN
     --Handling the unhandled exception
     PORACLE_ERROR               :=     SQLCODE;
     PORACLE_ERROR_MESSAGE     :=     SQLERRM;
     P_RESPONSE                    :=     'ORACLE_ERROR: '|| PORACLE_ERROR_MESSAGE;
     PRESPONSE_TIME               :=     (DBMS_UTILITY.GET_TIME - v_start_time)/100;
     SELECT data_transfer_status INTO PDATA_TRANSFER_STATUS
     FROM SPG_INTERFACE_TABLE
     WHERE transaction_id=PTRANSACTION_ID;
     --New functionality to update the oracle error and oracle error message and not the Data Transfer Status
BEGIN
SELECT message
INTO vl_std_returnCode
FROM SMT_MESSAGES
WHERE MESSAGE_CODE='SPGANTIDTS';
EXCEPTION
WHEN NO_DATA_FOUND THEN
vl_std_returnCode := '-12545,-29273,-1,';
WHEN OTHERS THEN
vl_std_returnCode := '-12545,-29273,-1,';
END;
     vl_RetCode     :=     PORACLE_ERROR || ',';
IF INSTR(vl_std_returnCode, vl_RetCode, 1, 1) <> 0 THEN
--If the error is found in above maintained standing data do not change the Data Transfer Status
               pdata_transfer_status:=pdata_transfer_status;
ELSE
          IF pdata_transfer_status='N' THEN
                         PDATA_TRANSFER_STATUS     :=     'F';
                         DBMS_OUTPUT.PUT_LINE('DUE TO ERROR DATA COULDN''T GET TRANSFERED TO SPG FOR TRANSACTION'||' '||PTRANSACTION_ID);
                         DBMS_OUTPUT.PUT_LINE(SQLERRM);
          ELSIF pdata_transfer_status='F' THEN
                         PDATA_TRANSFER_STATUS     :=     'S';
                         DBMS_OUTPUT.PUT_LINE('DUE TO ERROR DATA COULDN''T GET TRANSFERED TO SPG FOR TRANSACTION'||' '||PTRANSACTION_ID);
                         DBMS_OUTPUT.PUT_LINE(SQLERRM);
ELSE
                         DBMS_OUTPUT.PUT_LINE('Failure WHEN sending data TO Error LOG. Data Transfer Status IS ' || PDATA_TRANSFER_STATUS || '. TRANSACTION ID '|| PTRANSACTION_ID);
          END IF;
END IF;
          --Now update all the information gathered above to the table
     UPDATE SPG_INTERFACE_TABLE
          SET     response          =     P_RESPONSE,
          data_transfer_status     =     PDATA_TRANSFER_STATUS,
          oracle_error               =     PORACLE_ERROR,
          oracle_error_message     =     PORACLE_ERROR_MESSAGE,
          response_time               =     PRESPONSE_TIME
          WHERE transaction_id     =     PTRANSACTION_ID;
          COMMIT;
END;
/

I have fixed the problem by own.
Seems there are some while space in the endpoint url.
Fix
http_req:= utl_http.begin_request
trim(l_endpoint_url)
,'POST'
,'HTTP/1.1'
It works...
Regards
BS

ORA-12001 : execution of 1 Job faile ORA-06512

Similar Messages

Maybe you are looking for