ORA-12154(Urgent PLZ)

I have installed oracle app. server Rel2 on winXP professional, after installation when i try to connect through PLSQL editor it says error ORA-12154 unable to resolver service name. I have checked for tnsnames.ora file in ORA_HOME/network/admin and i cant find it. so what to do ?

Hi,
 Sorry, I'm confusing, do you install Oracle database server, or Oracle application server ?
 Perhaps the Oracle Application Server - General is more suitable in your case.
 Nicolas.
Message was edited by:
N. Gasparotto

Similar Messages

URGENT :: ORA-12154: TNS:could not resolve service name

Hi All,
I am connecting to the db using oracle thin driver in java. I am invoking a SOAP call and after getting the response, i am inserting the response(gen. a pdf file) into my DB. I am using a static connection. I have to insert 130 pdf's in DB. After processing 120 pdf's, the following error has occurred,
ERROR DBUtil - ORA-12154: TNS:could not resolve service name
java.lang.NullPointerException
 at com.elsevier.cds.ew.DBUtil.insertPDF(Compiled Code)
 at com.elsevier.cds.ew.GenerateSoapRequest.generateSOAPCall(Compiled Code)
 at com.elsevier.cds.ew.EOffprintLoad.processPDFFiles1(Compiled Code)
 at com.elsevier.cds.ew.EOffprintLoad.init1(Compiled Code)
 at com.elsevier.cds.ew.EOffprintLoad.<init>(EOffprintLoad.java:138)
 at com.elsevier.cds.ew.EOffprintLoad.main(EOffprintLoad.java:987)
ERROR GenerateSoapRequest -
ERROR DBUtil - ORA-12154: TNS:could not resolve service name.
The checked the oracle listener status. It was UP.
Can anyone help me in this issue.
Thanks,
Rag

Hello,
Make sure that the service which you have specified in jdbc for making connection with oracle, exists in TNSNAMES.ORA file. You will find this file at different locations in 8i and above. So, better search for it. And add you service name in it. Example services is given in this file itself. So, take help from them.

URGENT: ORA-12154: TNS:could not resolve the connect identifier specified

State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
1). I have TNS entries under MW_HOME/OracleBI/network/admin
2). TNSPING works fine.
3). JDBC source set up on WLS side..
what else do I need to do?

Show the full exception stack trace. This doesn't seem to relate to WebLogic. Does the WebLogic console
show the DataSource as running? Are you in fact using the WebLogic DataSource?

Warning: _oci_open_server: ORA-12154... ( plz... )

hi
I use linux + php4.0 + oracle 8.1.5 ...
First, it worked very fine...no error...
Suddenly it didn't worked...
and such errors...
Warning: ociopen_server: ORA-12154: TNS:could not resolve service name
i know this error occured that TNS configuration is wrong...
but TNS is right....
Ordinaril it works....sometimes it doesn't work.....
please help me...

You are probably starting Apache as root. Make sure you have the proper environment variables defined (i.e. ORACLE_HOME, ORACLE_SID, and TNS_ADMIN). Normally you'll get the 12154 error if there is an error in your tnsnames.ora file or if the software cannot find it.
hth,
Jerry

Gives ORA-12154 error, when trying to connect as sysdba

Hi Gurus,
I am new to oracle. I have successfully install Oracle Database 10gR2 on RHEL4.
Everyghing is working fine.
I found that loging through sqlplus not success as sysdba.(ORA-12154) But as a normal user I can loging through sqlplus. Anyway I can loging as sysdba through emctl console.
Can anyone help on this pls. Urgent.......................

You're welcome.
I dont know how this happened Probably your old password had some special characters within it, that's why I wanted to know if connecting without password did work. Then I would have advised you to change your password (avoiding special characters...).

CONCSUB failed due to ORA-12154: TNS:could not resolve service name

Hiall,
While bringing up concurrent managers getting the below error.
Cause: CONCSUB failed due to ORA-12154: TNS:could not resolve service name
I just cloned the instance.
urgent help is appreciated as I am missing the dead line to complete clone.
Regards,
Siva

Pleas post OS and EBS version
Please check the listener is up and running on DB tier.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1
Edited by: 3Amigos on Nov 21, 2010 9:16 AM

Bad public user name or password. ORA-12154: TNS:could not resolve the conn

I tried by all means to resolve the issue, but still i am not able to configure P6 professional to my existing database.
I am always getting error " *Bad public user name or password. ORA-12154: TNS:could not resolve the connect identifier specified*".
I am able to connect to database using pubuser or privuser via CMD.
I also tried through Net Configuration Assistance but no success.
Plz help me in this issue.

resolved

Error while trying to retrieve text for error ORA-12154

Hello,
I try to install php 5.1.2 on a WIN2003 server and IIS6 with the OCi8 extension without success from several days.
On my server I've a 920 oracle client and the 10.1 instant client, I copy the tnsnames.ora in the instant client's directory.
I've declare many environnement variables :
- NLS_LANG : AMERICAN_AMERICA.WE8MSWIN1252
- TNS_ADMIN : E:\...\oracle\instantclient_10_1
- ORA_NLS33 : E:\..\oracle\920\ocommon\nls\ADMIN\DATA
With the php command line the oci_connect function correctly works : the php command line use the instant client's tnsnames.ora. I can query with success my database.
When I try to load a web php script (the same as the php command line script) I have the following error " Error while trying to retrieve text for error ORA-12154" ( oci_connect( $user , $pass, $sid ) . The $sid variable have the value of an alias declared in the tnsnames.ora.
If I replace the sid's alias by something like this " (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xx.xx.xx.xx)(PORT=1521)))(CONNECT_DATA=(SID=xx)" in the oci_connect function, I have another error : Error while trying to retrieve text for error ORA-12705.
A web page with the phpinfo function displays the following messages about oci8 extension : It seems to be correct.
oci8
OCI8 Support enabled
Revision $Revision: 1.269.2.8 $
Active Persistent Connections 0
Active Connections 0
Temporary Lob support enabled
Collections support enabled
Do you have any idea ? Thanks a lot

The web server is not seeing the Oracle environment correctly. You need to set PATH to the instant client libraries. ORA_NLS33 is not used for Oracle 10g clients. Perhaps you have some library conflict with two versions of Oracle on the machine?
These may help:
http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#envvars
http://blogs.oracle.com/opal/2006/05/01

DNS Set Up system throw as ORA-12154; TNS :could not resolve the connect id

Hi,
While i'm creating DNS set up system throws below message
unable to connect
SQLState=08004
DNS Set Up for instantclient(win32-10.2.0.4) system throw as ORA-12154; TNS :could not resolve the connect identified specified.
operationg system:xp
dir path:C:\Oracle\instantclient10_2
TNSNAMES.ORA(C:\Oracle\instantclient10_2\NetWork\ADMIN) Contants
YourTNSName =sankar
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT =1521))
(CONNECT_DATA =
(SID =sankar)
(SERVER = DEDICATED)
dir contains:
sqresus.dll,
sqresja.dll
sqoras32.dll
sqora32.dll
oraociei10.dll
oraocci10.dll
orannzsbb10.dll
ojdbc14.jar
ocijdbc10.dll
ociw32.dll
oci.dll
classes12.jar

user7197586 wrote:
Hi
I have been created one DBLink it's created but when i am trying to access the data through the link it's raise error as
"ORA-12154: TNS:could not resolve the connect identifier specified"
CREATE
PUBLIC DATABASE LINK
Vrd_tcplink
CONNECT TO
"SAPVRD"
IDENTIFIED BY
"manager123"
USING
'VRD_TCP.WORLD'
created this above dblink
Kindly Suggest to wau out.
Regards,
Sachin
When using a dblink, the database with the link is acting as a client to the remote database ... exactly like sqlplus running on the db server.
read: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ ora-12154tns-03505

ORA-12154 when using Database Link

We're running 11r2 on our servers. I have a primary db and a standby db, using Data Guard. The standby is open for read-only querying. We are not using ASM.
The primary (and thus the standby) have a PUBLIC database link to a third db server.
When I run a query against the database link on the primary: select * from test@MyDBlink; Everything works fine.
When I run the same query against the database link on the standby: select * from test@MyDBlink; I get ORA-12154: TNS:could not resolve the connect identifier.
I check that the db link exists on the standby. It does.
I go to command prompt on the standby and run "tnsping MyDBlink". It executes fine. It says "Used TNSNAMES adapater to resolve the alias" and sure enough, MyDBlink is referenced in the TNSNAMES.ORA.
I also run "tnsping IP-of-MyDBlink" to doublecheck. No issues.
What is going on that is blocking the db link on the standby? Many reports utilize that standby and I'd hate to deny them the functionality of a db link.
Thanks

893968 wrote:
We're running 11r2 on our servers. I have a primary db and a standby db, using Data Guard. The standby is open for read-only querying. We are not using ASM.
The primary (and thus the standby) have a PUBLIC database link to a third db server.
When I run a query against the database link on the primary: select * from test@MyDBlink; Everything works fine.
When I run the same query against the database link on the standby: select * from test@MyDBlink; I get ORA-12154: TNS:could not resolve the connect identifier.
I check that the db link exists on the standby. It does.
I go to command prompt on the standby and run "tnsping MyDBlink". It executes fine. It says "Used TNSNAMES adapater to resolve the alias" and sure enough, MyDBlink is referenced in the TNSNAMES.ORA.
I also run "tnsping IP-of-MyDBlink" to doublecheck. No issues.
What is going on that is blocking the db link on the standby? Many reports utilize that standby and I'd hate to deny them the functionality of a db link.
ThanksMost people with this problem don't understand that the dblink is just another client, no different than sqplus running on the same machine - and therefore the link uses the tnsames in the ORACLE_HOME of the database containing the link. But it seems from the steps you've described that you've grasped that. The only thing I can think of off the top of my head is when you try sqlplus from the standby server you are hitting a different tnsnames than the one the database is using.

Sql@loader-704 and ORA-12154: error messages when trying to load data with SQL Loader

I have a data base with two tables that is used by Apex 4.2. One table has 800,000 records . The other has 7 million records
The client recently upgraded from Apex 3.2 to Apex 4.2 . We exported/imported the data to the new location with no problems
The source of the data is an old mainframe system; I needed to make changes to the source data and then load the tables.
The first time I loaded the data i did it from a command line with SQL loader
Now when I try to load the data I get this message:
sql@loader-704 Internal error: ulconnect OCISERVERATTACH
ORA-12154: tns:could not resolve the connect identifier specified
I've searched for postings on these error message and they all seem to say that SQL Ldr can't find my TNSNAMES file.
I am able to connect and load data with SQL Developer; so SQL developer is able to find the TNSNAMES file
However SQL Developer will not let me load a file this big
I have also tried to load the file within Apex (SQL Workshop/ Utilities) but again, the file is too big.
So it seems like SQL Loader is the only option
I did find one post online that said to set an environment variable with the path to the TNSNAMES file, but that didn't work..
Not sure what else to try or where to look
thanks

Hi,
You must have more than one tnsnames file or multiple installations of oracle. What i suggest you do (as I'm sure will be mentioned in ed's link that you were already pointed at) is the following (* i assume you are on windows?)
open a command prompt
set TNS_ADMIN=PATH_TO_DIRECTOT_THAT_CONTAINS_CORRECT_TNSNAMES_FILE (i.e. something like set TNS_ADMIN=c:\oracle\network\admin)
This will tell oracle use the config files you find here and no others
then try sqlldr user/pass@db (in the same dos window)
see if that connects and let us know.
Cheers,
Harry
http://dbaharrison.blogspot.com

While trying to change password getting ora-00600 [4842] - Plz help

while trying to change password getting ora-00600 [4842] - Plz help
database : 9.2.0.4
o/s : Linux

Hi,
when getting an ORA-600 you always should contact Oracle support please ;-)
To diagnose an ORA-600 the stack trace will be necessary - see the trace file mentioned in the alert.log when the ORA-600 did happen.
But FIRST OF ALL you should definitely apply patch set 9.2.0.8 and see if this error happens again (metalink.oracle.com ==> PATCHES ==> Quick Links ==> <your platform>). Support will ask you to do the same before they start diagnosing anything in this case.
And please keep in mind that 9.2.0 has reached end of Premier Support more than 1 year ago.
Kind regards
Mike

ORA-12154 while installing Oracle 10g on windows 7

Hi,
I am trying to install Oracle 10g express edition on my machine (core 2 duo 2.93) running on Windows 7.
The installation moves on perfectly for the 1st step and while running the 2nd step (Net configuration Assistant), it gives the ORA-12154 error.
The contents of my configuration files at this point are as follows:
Listener.ora
=============
SID_LIST_ORCL =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORCL)
(ORACLE_HOME = F:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
ORCL =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
=============
And that of tnsnames.ora is:
=============
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
=============
After some googling around, I have found and installed the Microsoft Loopback adapter too (since my LAN is DHCP enabled) and also tried to turn on the firewall on my machine to check if it is not a problem with the port 1521 being blocked by the firewall.
However, even after all that I still get the error "ORA-12154: TNS:could not resolve the connect identifier specified." while running the Net configuration Assistant and/or running SQL Plus to connect to the SID - ORCL.
I can only see one service running in my services by the name : OracleOraDb10g_home1TNSListenerORCL
Any suggestions or advice on the error would be much welcome.
Is it anything related to Windows 7 ? Because I have managed to install using the same installer on another machine which runs Windows XP and everything seems fine there.
Thanking you all in anticipation.
Shreyas

user12753151 wrote:
Hmmm.. but then I'd have expected some installation error. I have read around that people have managed to install oracle on windows 7.
The error displayed seems to be indicating that there is some configuration or permissions issue.Check that the user has permission to write in the ORACLE_HOME\network\admin - UAC might be blocking that.
Install with software only, and run netca & dbca separately to create the database after the s/w install. (That's the way it is done in production anyway, so get used to it.)
But yes - you still may have problems. Those who did fake it out on Windows 7 usually understand what to do. If you are smart enough to actually do it, my hat is off to you.

While logging I am getting error ORA-12154:

I am getting this error, while logging.
ERROR:
ORA-12154: TNS:could not resolve service namePls Wat I need to do,

hi coolguy,
my sqlnet.ora file is
# SQLNET.ORA Network Configuration File: C:\oracle\ora92\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)and my tnsnames.ora file is
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA.ASTSERVER40.COM =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
SANDB.ASTSERVER40.COM =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ast16)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = sandb)
INST1_HTTP.ASTSERVER40.COM =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ast16)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = SHARED)
      (SERVICE_NAME = MODOSE)
      (PRESENTATION = http://HRService)
)and my computer name:
Full computer name: ast16.astserver40.com
Domain                  : astserver40.comand I tested in command prompt, with tnsping which is mentioned you I am getting this error
C:\>tnsping sandb
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 21-NOV-20
07 11:20:22
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\oracle\ora92\network\admin\sqlnet.ora
TNS-03505: Failed to resolve namewhere's the problem....
Message was edited by:
user594309

Error while trying to retrieve text for errror ORA-12154

Hi,
I have an Oracle8 database installed and able to connect it from my Desktop running Windows 2000 Server.
I have setup my PL/SQL developer ver 6 on my laptop running Windows XP Pro SP2 and the oracle client with Net8 service setup. Able to logon via sqlplus command.
However, when i run the PL/SQL program and enter the logon info, it couldn't connect and prompt me this error.
Thanks for your help in advance.
Warmest regards,
Tony Ang
Singapore
MSN: [email protected]

Tony,
Can you please post the error details that you are getting while connecting from PL/SQL developer.
The error ORA-12154 is generaly TNS:could not resolve service name .
Also perfrom these steps
1)Verify that a tnsnames.ora file exists.
2)Verify that there are not multiple copies of the tnsnames.ora file.
3)In the tnsnames.ora file, verify that the net service name specified in your connect string is mapped to a connect descriptor.
4)Verify that there are no duplicate copies of the sqlnet.ora file.
5)If you are using domain names, verify that your sqlnet.ora file contains a NAMES.DEFAULT_DOMAIN parameter. If this parameter does not exist, you must specify the domain name in your connect string.
6)If you are not using domain names, and this parameter exists, delete it or disable it by commenting it out.
7)If you are connecting from a login dialog box, verify that you are not placing an "@" symbol before your connect net service name.
Hope this helps.
Thanks
Rajeev

ORA-12154(Urgent PLZ)

Similar Messages

Maybe you are looking for