Ora-12545 strange error
Dear friends
I have one strange error in Oracle 8.1.7 , Windows NT server. We have 4 databases in a same box. All are working fine till yesterday. Today morning I am facing this problem. I can not connect to one database out of four from any client. Getting error "ORA-12545: Connect failed because target host or object does not exist"
Other 3 databases in the same server I can connect from client.
In the server I can connect all four databases without any problem.
I am using tnsping <servicename> from the client, is getting OK.
I Observed the tnsnames.ora in the client , nothing found strange. Because all client machines have this problem.
Pleas advise?
I did both your suggestions
First of all all clients are working properly till yesterday without any problem. Today I faced this problem in all clients around 10 clients same time. I feel it is may be Host machine database /network setting problem. How we can trace?
When I restart Listner using lsnrctl command in server , then I can connect from client using SQLplus but a while only. When I Establish another connection in the same client or from any other client, it won't allow me. Also , connected session getting error.
When I issue lsnrctl status command in server it is displaying like this. Maxnew is the one that have problem.
lsnrctl> status
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.0.0 - Produc
tion
Start Date 03-APR-2006 14:30:06
Uptime 0 days 0 hr. 17 min. 53 sec
Trace Level analysis
Security OFF
SNMP OFF
Listener Parameter File D:\oracle\ora81\network\admin\listener.ora
Listener Log File D:\oracle\ora81\network\log\listener.log
Listener Trace File D:\ORACLE\MAXNEW.TRC
Services Summary...
MAXNEW has 1 service handler(s)
maxnew has 3 service handler(s)
MAXPRD has 1 service handler(s)
MAXPRD has 2 service handler(s)
MAXTEST has 1 service handler(s)
MAXTEST has 1 service handler(s)
PLSExtProc has 1 service handler(s)
NBDDATA has 1 service handler(s)
nbddata has 1 service handler(s)
The command completed successfully
Please advise?
James
Message was edited by:
[email protected]
Similar Messages
-
hi,
i think the database is crashed an when i try recover database
SQL> recover database
ORA-00283: recovery session canceled due to errors
ORA-00333: redo log read error block 8194 count 8192
when i try to connect it gives 01033 error.
would anyone suggest meI did both your suggestions
First of all all clients are working properly till yesterday without any problem. Today I faced this problem in all clients around 10 clients same time. I feel it is may be Host machine database /network setting problem. How we can trace?
When I restart Listner using lsnrctl command in server , then I can connect from client using SQLplus but a while only. When I Establish another connection in the same client or from any other client, it won't allow me. Also , connected session getting error.
When I issue lsnrctl status command in server it is displaying like this. Maxnew is the one that have problem.
lsnrctl> status
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.0.0 - Produc
tion
Start Date 03-APR-2006 14:30:06
Uptime 0 days 0 hr. 17 min. 53 sec
Trace Level analysis
Security OFF
SNMP OFF
Listener Parameter File D:\oracle\ora81\network\admin\listener.ora
Listener Log File D:\oracle\ora81\network\log\listener.log
Listener Trace File D:\ORACLE\MAXNEW.TRC
Services Summary...
MAXNEW has 1 service handler(s)
maxnew has 3 service handler(s)
MAXPRD has 1 service handler(s)
MAXPRD has 2 service handler(s)
MAXTEST has 1 service handler(s)
MAXTEST has 1 service handler(s)
PLSExtProc has 1 service handler(s)
NBDDATA has 1 service handler(s)
nbddata has 1 service handler(s)
The command completed successfully
Please advise?
James
Message was edited by:
[email protected] -
Occasionally got ORA-12545 error
I have 2-node Oracle 10g RAC set up. From a remote client, i run my sample program to retrieve scott.emp data. Occasionally i got ORA-12545 connection error. Using cpp app and Perl DBI app for tested it. And I got the same problem.
./mysample
Environment and Connection created
Result Set:
7369 SMITH CLERK 7902 17-DEC-80 800 0 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 0 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 0 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 0 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 0 20
7839 KING PRESIDENT 0 17-NOV-81 5000 0 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 0 20
7900 JAMES CLERK 7698 03-DEC-81 950 0 30
7902 FORD ANALYST 7566 03-DEC-81 3000 0 20
7934 MILLER CLERK 7782 23-JAN-82 2300 0 10
Environment and Connection terminated
./mysample
Aborted
./select.pl
DBI connect('lot','scott',...) failed: ORA-12545: Connect failed because target host or object does not exist (DBD ERROR: OCIServerAttach) at ./select.pl line 6
Here is the sqlnet.log:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXXXXXX)(PORT=1521))(LOAD_BALANC
VERSION INFORMATION:
TNS for Linux: Version 10.1.0.2.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.1.0.2.0 - Production
Time: 15-NOV-2004 10:30:22
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
Anyone knows what went wrong?
thanks,
qichengI have same problem :-( When I try to connect from client station, but when Im connecting from one of nodes it is OK :-(
Ales -
Strange error while creating form/report pages [ORA-20001]
While creating two new pages with a form and report on it, I've got a strange error. I tried to create the pages several times, but I always got the same error:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create form on table. ORA-20001: Error creating shortcut id="" ORA-00001: unique constraint (FLOWS_030000.WWV_FLOW_SHORTCUT_IDX1) violated
Error creating query and update.
Return to application.
I'm using the wizard to get the pages, like I did many times before (without problems), but this time it will not work!
Greetings,
JanBelow is a view or sql query i want to create in XE to show users report on startdate,end date,road name,etc,i am having a problem making this view work when i put the code in the sql script. Kindly help me with this if you can please. Thanks. CREATE OR REPLACE FORCE VIEW "RESULTS_DETAILS_VIEW" ("STARTDATE","ENDDATE","ROAD","NAME","STATUS","TYPE","UTILITIES","DATES","LUTON",
AS SELECT
d.Startdate,
d.EndDate,
l.Road,
u.Name,
ws.Status,
wt.Type,
cb.startdate,
cb.enddate,
cb.road,
cb.utility,
cb.type,
cb.status
FROM
Dates d,
Luton l,
Utilities u,
WorkStatus ws,
WorkType wt,
Comb cb
WHERE cb.startDate = d.StartDate
AND cb.endDate = d.EndDate
AND cb.road = l.Road
AND cb.utility = u.Name
AND cb.type = wt.Type
AND cb.status = ws.Status
WITH READ ONLY
/ -
Error while installing Oracle 8i on RHEL 3.0, ORA-12545
Hi,
I am trying to install oracle 8.1.7 on redhat EL 3.0. Earlier i installed the same oracle i.e 8.1.7 on redhat 8.0/9.0 and it installed sucesfully. The proceudre
i follow for installtion was :
####### some settings
groupadd dba
groupadd oinstall
groupadd oracle
useradd -g dba -G oinstall,oracle -m oracle
passwd oracle
mkdir /ora8
cd /ora8
mkdir -p m01 m02 m03/oradata/ora8
chown -R oracle.dba /ora8
###### login as oracle. changes in .bash_profile(setting up of parameters)
export ORACLE_BASE=/ora8/m01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/8.1.7
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export ORACLE_SID=perfdb
export ORACLE_TERM=vt100
export ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
umask 022
LD_ASSUME_KERNEL=2.2.5
##### thereafter i run installer
./runInstaller
It goes smoothly and later it gives linking error. I ignore them at this stage.
#### thereafter I apply the patch
tar xzf /tmp/glibc2.1.3_stub.tgz
./setup_stubs
#### Therafter i run dbassist and I create the db and all went well.
When i followed the same procedure in RHEL 3.0 it goes smooth till applying patch glibc2.1.3_stub.tgz but thereafter when i try to create db using dbassist it gives me error like :
ORA-12545 Connect failed because target host or object does not exist.
Even if i tried to run svrmgrl it gives me error
:ORA-12545 Connect failed because target host or object does not exist
Could anyone help me in resolving that ? the same installation procedure works well for Redhat 8.0/9.0
Thanks
Harsh BhatiaDBCA calls svrmgrl.exe in order to make a startup nomount of the new database and svrmgrl.exe fails during the hostname resolution.
Try to give ipaddress rather than hostname in the tnsnames.ora file. -
Java.sql.SQLException: Error while trying to retrieve text for error ORA-12545
Hi,
I am getting the following error when i tried to connect to Oracle database from
a servlet. This exception is coming at the time of getting connection. And the
same code is working when i used in the standalone java program.
Oracle 8i database and WLS 6.0 are on the same UNIX machine.
---------attempting to connect ------
java.sql.SQLException: Error while trying to retrieve text for error ORA-12545
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java, Compiled
Code)
at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java, Compiled C
ode)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java, Compiled Code)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java, Com
piled Code)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va, Compiled Code)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java, Compiled C
ode)
at java.sql.DriverManager.getConnection(DriverManager.java, Compiled Cod
e)
at java.sql.DriverManager.getConnection(DriverManager.java, Compiled Cod
e)
at ConnectionPoolServlet.doGet(ConnectionPoolServlet.java, Compiled Code
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Cod
e)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Cod
e)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java, Compiled Code)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java, Compiled Code)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java, Compiled Code)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java, Compiled Co
de)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Can any one help me out.
DurgaThe problem is solved after exprting the parameter ORACLE_SID=<database_name>
in Weblogic startup script.
thank u for the suggestions.
Durga
Joseph Weinstein <[email protected]> wrote:
>
>
Durga wrote:
Hi Joe,
I have checked the ORACLE_HOME parameter. There was a differnce. Ichanged to
/oracle/app/product/8.1.7
Now i am getting different exception. But still the standalone codeis working.
any clues why I am getting this exception. I will send the code andthe weblogic
properties file for reference if u need.Good. No, I don't need it. Now make sure the library path that the OS
uses to find
Oracle libraries, and our driver libraries etc., is in the same order
for the
server as for the shell that is successful on it's own. Make sure your
Oracle
client stuff is ahead of any weblogic libraries.
Joe
java.sql.SQLException: ORA-12547: TNS:lost contact
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java,Compiled
Code)
at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java,Compiled
C
ode)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java, CompiledCode)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java,Com
piled Code)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java,Compiled
C
ode)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java,Compiled
C
ode)
at java.sql.DriverManager.getConnection(DriverManager.java,Compiled Cod
e)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at ConnectionPoolServlet.doGet(ConnectionPoolServlet.java,Compiled Code
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.getRuntimeName(ServletStubI
mpl.java, Compiled Code)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java, Compiled Code)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java,Compiled
Co
de)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, CompiledCode)
Joseph Weinstein <[email protected]> wrote:
The environment for the server probably doesn't have the same ORACLE_HOME
setting as your shell when you succeed in a standalone.
Also, you should be using our connection pools, and you should avoid
making DriverManager calls in any multithreaded app such as WebLogic.
Joe
Durga wrote:
Hi,
I am getting the following error when i tried to connect to Oracledatabase from
a servlet. This exception is coming at the time of getting connection.And the
same code is working when i used in the standalone java program.
Oracle 8i database and WLS 6.0 are on the same UNIX machine.
---------attempting to connect ------
java.sql.SQLException: Error while trying to retrieve text for errorORA-12545
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java,
Compiled
Code)
at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java, CompiledC
ode)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java, Compiled
Code)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java,Com
piled Code)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va, Compiled Code)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java, CompiledC
ode)
at java.sql.DriverManager.getConnection(DriverManager.java, CompiledCod
e)
at java.sql.DriverManager.getConnection(DriverManager.java, CompiledCod
e)
at ConnectionPoolServlet.doGet(ConnectionPoolServlet.java, CompiledCode
at javax.servlet.http.HttpServlet.service(HttpServlet.java, CompiledCod
e)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, CompiledCod
e)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java, Compiled Code)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java, Compiled Code)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java, Compiled Code)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java, CompiledCo
de)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Can any one help me out.
Durga -
8.1.5 installs on Redhat 6.1, but ORA-12545 error
I carefully followed all of the installation instructions, and the installation procedure seemed to go as expected. But when I attempt to create a database with dbassist, I get an error:
ORA-12545 Connect failed because target host or object does not exist
Note: This is not a networked machine, but there are two network cards installed in the machine. The hostname is currently set to "localhost.localdomain".
Any ideas?
Thanks,
J.R. Belding
[email protected]
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jrbelding ([email protected]):
I carefully followed all of the installation instructions, and the installation procedure seemed to go as expected. But when I attempt to create a database with dbassist, I get an error:
ORA-12545 Connect failed because target host or object does not exist
Note: This is not a networked machine, but there are two network cards installed in the machine. The hostname is currently set to "localhost.localdomain".
Any ideas?
Thanks,
J.R. Belding
[email protected]<HR></BLOCKQUOTE>
Also, I did notice that there seemed to be some errors during execution of the ./linux.sh and ./linux_815patches.sh scripts.
null -
ORA-12545 error after changing the host name as IP address in Tnsnames.ora
HI,
I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
Seems you specified wrong IP address. -
Strange errors ORA-02068 ORA-00600
Hi,
I have a strange error in my mapping, that I have never heard before.
In the source schema, I have a table that I check, that gives me a list of PK in order to know which lines I have to take in the other table of the schema.
At the end of the mapping, I have to UPDATE the table in order not to take the lines when the mapping is executed the next day : there is a field which is a flag that I have to update from 0 to 1.
But the mapping never manage to UPDATE all the table, it gives me these errors :
ORA-00600 : internal error code, arguments : : [kdoorp-1], [15], [0], [], [], [], [], []
ORA-02068 : following severe error from [DB_LINK_NAME]
I made a mapping which only update the table and it doesn't work anymore. What is strange is that it stops the first time after 1003 rows updated, the second time 2007, the third 4014, etc... ? I don't understand ???!!
Can someone help me ?
Thanks,
NicoThere are some bugs reported against Oracle 9.2.0.8 with similar error:
bug 5703193 and 6020413 which is unpublished.
I can not recommend other than contacting support.
Regards,
Robert -
Re:ORA-12545 error (host target)
Can anyone shed some light on this... I have just installed red hat linux 9 and have been trying install Oracle 9.2 (i have followed many instructions from sites and have done all the export cmds etc...). But i keep getting a ORA-12545 error when trying to connect (no target host found)i have looked at the listener.ora file and cant seem to see anything wrong. What else can i do to solve my problem??? Ian.
There are several issues that you have to check out.
ORA-12545: TNS:name lookup failure
Cause: The listener on the remote node cannot be contacted.
Action: Perform these steps:
Verify that the ADDRESS in the tnsnames.ora file and the listener.ora file is correct.
Verify that the listener on the remote node has been started. Enter:
lsnrctl
LSNRCTL> STATUS [listener_name]
listener_name is the name of the listener defined in the listener.ora file. It is not necessary to identify the listener if you are using the default listener, named LISTENER.
If the output indicates the listener is not running, try starting it with the command:
LSNRCTL> START [listener_name]
First than nothing :
1.- Can you get connection locally in the Server ?
Joel P�rez -
ORA-12545 error while installing Oracle 8i on RHEL 3.0
Hi,
I am trying to install oracle 8.1.7 on redhat EL 3.0. Earlier i installed the same oracle i.e 8.1.7 on redhat 8.0/9.0 and it installed sucesfully. The proceudre
i follow for installtion was :
####### some settings
groupadd dba
groupadd oinstall
groupadd oracle
useradd -g dba -G oinstall,oracle -m oracle
passwd oracle
mkdir /ora8
cd /ora8
mkdir -p m01 m02 m03/oradata/ora8
chown -R oracle.dba /ora8
###### login as oracle. changes in .bash_profile(setting up of parameters)
export ORACLE_BASE=/ora8/m01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/8.1.7
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export ORACLE_SID=perfdb
export ORACLE_TERM=vt100
export ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
umask 022
LD_ASSUME_KERNEL=2.2.5
##### thereafter i run installer
./runInstaller
It goes smoothly and later it gives linking error. I ignore them at this stage.
#### thereafter I apply the patch
tar xzf /tmp/glibc2.1.3_stub.tgz
./setup_stubs
#### Therafter i run dbassist and I create the db and all went well.
When i followed the same procedure in RHEL 3.0 it goes smooth till applying patch glibc2.1.3_stub.tgz but thereafter when i try to create db using dbassist it gives me error like :
ORA-12545 Connect failed because target host or object does not exist.
Even if i tried to run svrmgrl it gives me error
:ORA-12545 Connect failed because target host or object does not exist
Could anyone help me in resolving that ? the same installation procedure works well for Redhat 8.0/9.0
Thanks
Harsh BhatiaWhat version of gcc are you using?
Check out this link: http://www.redhat.com/archives/taroon-list/2004-June/msg00030.html
All 8i and 9i releases are built with 2.9x versions of gcc, so you might have to downgrade gcc in order to get 8i running.
-Antti -
Error Could not connect to the database - ora-12545: tns:name lookup failure
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, MaryCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary -
ORA-12545 error in rac, local&remote listener
Hi,
We have an 10g Release 2 RAC system. We usually take
ORA-12545 Connect failed because target host or object does not exist tips
error message. I think tnsnames.ora file is correct, I can achieve to send tnsping message. And I think the host file is alaso correct, I am successful to send ping message to the ip in the host file. And we are noticed that cpu utilization of one RAC node is very bad. Do you that these two problem can be related? I searched the error message on internet. I think this link is interesting:
http://www.ardentperf.com/2007/04/02/local_listener-and-ora-12545/
But I do not fully understand the article. Because I do not know the local&remote listeners.
Can you help me?12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.While logged onto the target system issue the following commands:
lsnrctl status
lsnrctl service
CUT commands & results and PASTE back here
Generate another error & then CUT the last 20 - 30 records from listener.log & PASTE back here -
I have a problem connecting to the host.
I am able to ping successfully to the server.
When I execute tnsping from the client machine, the operation runs successfully.
TNS Ping Utility for 32-bit Windows: Version 2.3.2.1.0 - Production on 21-JUN-01 10:45:50
Copyright , 1996(c) Oracle Corporation 1995. All rights reserved.
Attempting to contact (ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=150.140.130.35)(Port=1521))
OK (50 msec)
However when I use SQL Plus or Forms Application to connect to this database, I get the following error :
SQL> connect armada/armada@orants
ERROR: ORA-12545: TNS:name lookup failure
My TNSnames extract for this database is as follows :
orants.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 150.140.130.35)
(Port = 1521)
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 150.140.130.35)
(Port = 1526)
(CONNECT_DATA = (SID = ORANTS)
A quick reply will be appreciated.Hi
Just thought I'd tell the list that I had to add
disable_oob = on
to the client sqlnet.ora and it worked like a charm.
Try this
Good Luck
r@m@ -
Hi,
I am working in oracle9i and solaris, if i connected to the database by pl/sql i am receiving the following error as
ora-12545 : connect failed because target host or object does not exist.
But if i ping the server its working fine
and also i use tnsping the database means its also working fine ...
my collegaue he is able to connect...
Only mysely receiving that error.
Please tell me the solutions ...hi
this is the tns names
GE_TFLT5.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =(PROTOCOL =TCP)(HOST =spa.fleet.capital.ge.com)(PORT =1521))
(CONNECT_DATA =(SERVICE_NAME =ge_tflt5)
C:\Documents and Settings\jayarago>tnsping GE_TFLT5.WORLD
TNS Ping Utility for 32-bit Windows: Version 9.0.1.1.1 - Production on 02-MAR-20
07 15:18:32
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
c:\oracle\ora90\network\admin\sqlnet.ora
c:\oracle\ora90\network\admin\tnsnames.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS =(PROTOCOL =TCP)(H
OST =spa.fleet.capital.ge.com)(PORT =1521))) (CONNECT_DATA =(SERVICE_NAME =ge_tf
lt5)))
OK (7530 msec)
C:\Documents and Settings\jayarago>
Maybe you are looking for
-
Urgent: What ports should be required in DMZ zone?
Hi, I am thinking the ports question might need to posted here. Please have a look on my posting in the following link: Urgent: What ports should be required in DMZ zone? Thanks and Regards,
-
I have a TBI and need help using ADOBE products
I was injured/blown up by a suicide bomber in Iraq. I have a brain injury. I am no longer the sharpest knife in the draw. My brain does not follow along like it used to, and I need someone with some patience to help me go through some Adobe prouct
-
I'm trying to export some of our shows for Podcast, however when I export in the iTunes Video Large (.mp4) format, I end up with nearly every other frame being a flash of bright green. Anybody know what is the best way to export a video (with audio)
-
MO_GLOBAL.SET_ORG_ACCESS being pragma autonomous trxn
Hi, I was going through the package body of MO_GLOBAL. I could understand how SET_POLICY_CONTEXT, INIT, etc etc works and the way they set the g_access_mode, g_current_org_id etc etc .But my question is on MO_GLOBAL.SET_ORG_ACCESS which is used to se
-
New software for OS X v. 10.4 needs Classic?
I have an eMac 1.42 GHz PowerPC G4 with 256 MB DDR SDRAM running Mac OS X 10.4 When I try to install software for my kids, sometimes it works great. Other times it tries to tell me I need Classic 9.0. My eMac doesn't appear to have anything in this f