Ora-12546 TNS:permisssion denied
Hi all,
i am installing oracle 9.2.0.1.0 on windows 2003 server loging as administrator but after software installation complete and DBCA(data base configuration tool ) is in porgress to create starter database i am getting the below error at the time of
1)copying data files (complete successfully)
2)initializing database (complete successfully)
creating and starting oracle (i got below error)
error ora-12546.TNS : permission denied.
does anybody face the probelm.quick resonse will be higly appreciated.thanks a lot in advance.
Check the certification matrix
http://www.oracle.com/technology/support/metalink/index.html
HTH
Srini
Similar Messages
-
Backup job failing with error ORA-12546: TNS:permission denied
Hi All
This is regarding one backup job running on windows server 2003 failing with below error.. when we are running this job manually that is running fine.. but not running from windows scheduler.
its 9.2.0.1 and the 32 bit... windows 2003 64 bit
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12546: TNS:permission denied
Please help.
Edited by: 811427 on Sep 6, 2011 12:36 AMI assume you installed Oracle as "Administrator" user. If so, make sure you are running the job from the same user. Optionally open "services.msc" and go to the "ORCL Service" or whatever it may and check "Log on" tab. It should be "logon as" value should be "Local system". If you are using a domain then give credentials accordingly. Make sure you are part of "DBA" group.
The ORA-12546 TNS:permission denied points to "Insufficient permissions to trace/log files" - check the trace/log destination is writable and requisite permissions are given. -
ORA-12546: TNS:permission denied
Hi Friends,
I have just downloaded Oracle 11.2 XE on my Windows 8.1 X64. I have run the setup.exe and completed the installation.
Now, when I tried connecting to the db in SQL command line, I am getting the following error:
ORA-12546: TNS:permission denied
I have started database as well before getting into command line.
Could any one help me solving this problem?
Thanks in advanceHi
Thanks for the response.
My OS is windows 8.1 (64 bit). I installed Oracle XE 11.2.
In my SQL prompt I used connect command.
SQL> connect SYS/tiger
ERROR:
ORA-12546: TNS:permission denied
and
SQL> connect
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-12546: TNS:permission denied
I tried user name of the computer, SYSTEM, SYSMAN. And every time I get the same result. -
11g ora-12546 : tns permission denied
I have oracle 11g - 11.1.0.7.0 on AIX 6.1
The problem i have is connecting to sqlplus
The oracle user can connect but other users outside of oracle or dba group cannot connect unless they go through the listener.
EG: user/password@database works fine,
but if i try just sqlplus user/password i have the error 12546 : tns permission denied.
I have chmod 777 the oracle bin directory and the sqlplus executable but still no joy,
any ideas anyone, dont seem to be able to find anyone else with the same problem."I have chmod 777 the oracle bin directory"
No, this is a big security hole. Only the user running the database should be in the DBA group, and should be able to modify files from the database ORACLE_HOME/bin.
If other users need to login to the unix server (bad idea) and connect to the database, then it is best to create a new group (e.g DEV instead of DBA) and install an Oracle client for them to use. They should connect to the database using TWO_TASK instead of ORACLE_SID. -
Unable to connect to TOAD : ora:-12546 TNS Permission error
Hi friends
Kindly help me
Am Unable to connect to TOAD : ora:-12546 TNS Permission error
till 2 days before it was connecting.
Dont know what happened now
SQL*Plus and Forms 6i are getting connected.
What can be the issue ?
Regards
DoraHi
ORA-12546: TNS: permission denied
Cause: User has insufficient privileges to perform the requested operation.
Action: Acquire necessary privileges and try again.
Pls check the sites suggest by google
http://dbmotive.com/oracle_error_codes.php?errcode=12546&type=ORA
http://www.ironspeed.com/Designer/6.2.1/WebHelp/Part_V/ORA_12546_TNS_permission_denied.htm
Thanks & Regards
Srikkanth.M -
TNS-12546: TNS:permission denied TNS-12560: TNS:protocol adapter error
Dear Sir,
Please some can help. I have in stall in Ubuntu Oracle 10 g 64 bit
While running the listener.ora this gives following error
please help
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
thanks regards
sanatuser591475 wrote:
Dear Sir,
Please some can help. I have in stall in Ubuntu Oracle 10 g 64 bit
While running the listener.ora this gives following error
please help
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
thanks regards
sanatcopy the following commands, and paste them into a shell prompt:
ifconfig
env|grep ORA|sort
cat $ORACLE_HOME/network/admin/sqlnet.oracopy the entire session and paste back to your next post. -
How To Fix --- TNS-12546: TNS:permission denied
Following is what I see..
[gcars0j2:/oracled] lsnrctl start
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 03-JAN-2007 13:05:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /oracled/product/10.2.0/Db_3/bin/tnslsnr: please wait...
TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
System parameter file is /oracled/product/10.2.0/Db_3/network/admin/listener.ora
Log messages written to /oracled/product/10.2.0/Db_3/network/log/listener.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Solaris Error: 13: Permission denied
Listener failed to start. See the error message(s) above...Thank you thank you thank you.... It worked.
I thought I had taken care of /var/tmp, but I had messed/missed something. See below, there was a small issue, I had "t" and not "x" for all users (see in bold below. Now it works after I used "chmod 777 .oracle".
Thanks a lot.
# cd /var/tmp
# ls -la
total 14
drwxrwxrwx 6 root sys 512 Jan 3 17:05 .
drwxrwxrwx 44 root sys 1024 Dec 12 08:35 ..
drwxrwxrwt 2 root dba 1024 Jan 3 16:52 .oracle
prw------- 1 root root 0 Nov 7 19:22 .sysidtool_in
prw------- 1 root root 0 Nov 7 19:22 .sysidtool_out
-rw-r--r-- 1 root root 3 Nov 7 19:19 .sysidtool_pid
-rw-rw-rw- 1 oracle dbad 0 Jan 2 16:02 EM_TARGET_INSTALLER.lk
drwxr-xr-x 2 root root 512 Nov 14 22:10 dstreAAANWaWRj
drwxr-xr-x 3 root root 512 Dec 11 17:36 dstreAAATGa4sb
drwxr-xr-x 2 root root 512 Nov 5 14:01 dstreAAAnLaiid
# chmod 777 .oracle
# ls -la
total 14
drwxrwxrwx 6 root sys 512 Jan 3 17:05 .
drwxrwxrwx 44 root sys 1024 Dec 12 08:35 ..
drwxrwxrwx 2 root dba 1024 Jan 3 16:52 .oracle
prw------- 1 root root 0 Nov 7 19:22 .sysidtool_in
prw------- 1 root root 0 Nov 7 19:22 .sysidtool_out
-rw-r--r-- 1 root root 3 Nov 7 19:19 .sysidtool_pid
-rw-rw-rw- 1 oracle dbad 0 Jan 2 16:02 EM_TARGET_INSTALLER.lk
drwxr-xr-x 2 root root 512 Nov 14 22:10 dstreAAANWaWRj
drwxr-xr-x 3 root root 512 Dec 11 17:36 dstreAAATGa4sb
drwxr-xr-x 2 root root 512 Nov 5 14:01 dstreAAAnLaiid -
TNS-12546: TNS:permission denied in Oracle 10g windows XP
Hi I have windows xp installed in my pc. After installing 1og, th.e TNS listener service is not starting automatically.
While starting the service manually from command prompt I am getting the following error.
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAY-2009 11:01
:44
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is G:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to G:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=15
21)))
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
However the problem is when i connect to the internet and then try to start the listener it starts up and everything works fine after that even after disconnecting from the net. Please help me in solving this. Thank you
Edited by: [email protected] on May 15, 2009 11:24 PMYOU need to verify the host name or the ip address for your pc
1 you said when connect to the internet is working cause when you create the database the lsnrctl get the internet ip address
2 you can create new lsnrctl with new ip address and i will work -
TNS-12546 TNS:permission denied
I get the following error msgs when starting the listener with
the "lsnrctl start" command.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=Fhm))
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
Connecting to ADDRESS=(PROTOCOL=TCP)(Host=localhost)(Port=1521))
STATUS of the LISTENER
I'm using RH 5.2 and Oracle8.0.5 standard.
Does anyone know what what it needs to be done to correct the
problem?
Thanks
nullI had this problem too.
There is a patch script which apparently corrects this problem
and others, at <a
href=http://technet.oracle.com/>http://technet.oracle.com/</a>.
I have not run it yet as I need a spare hour to check out
exactly what the script will do.
I changed the owner and permitions on tnslsnr, as described
below, and that worked for me too.
Derek Stevenson (guest) wrote:
: This is a great, great tip. With a default install, the owner
: on tnslsnr is set incorrectly (to root, not to oracle), and
you
: keep getting the permission denied problems. Once the owner
is
: set correctly, though, the sqlplus user/passwd@dbname test
works
: just fine.
: Someone should publish this in the install directions!!!
: --Derek
: Harvey Berenberg (guest) wrote:
: : Andre Maasikas (guest) wrote:
: : : Jan Pfeiffer (guest) wrote:
: : : : Harvey Berenberg (guest) wrote:
: : : : : I get the following error msgs when starting the
: listener
: : : : : I'm using RH 5.2 and Oracle8.0.5 standard.
: : : : : Does anyone know what what it needs to be done to
: correct
: : the
: : : : : problem?
: : : : : Thanks
: : : : Check your permissions on the tnslsnr (suid - bit)
: : : I don't think the listener needs to be setuid, probably the
: : : owner is wrong, (root? I'v seen it sometimes) it should be
: the
: : : the owner/group of the oracle sofware owner.
: : I resolved the problem by changing permissions on the
tnslsnr
: to:
: : -rwxr-x--x 1 oracle dba 3636562 May 26 15:14
: tnslsnr
: : and on the directory $ORACLE_HOME/network/log to:
: : drwxrwxr-x 2 oracle dba 1024 May 17 16:55
: log
: : and on listener.log to:
: : -rw-rw-r-- 1 root dba 14291 May 26 17:19
: : listener.log
: : Thanks for the hints.
null -
ORA-12546 error during installation of 9.2.0.1 on Windows 2003 Server
I have encountered an error whilst installing oracle 9.2.0.1 on a Windows 2003 Server. The error appears in the final part of the installation, when the Database Configuration Assistant is performing some work - it reaches the part where it creates the database instance - here we get the "ORA-12546: TNS Permission denied" error - this part of the installation is marked as failed - i can retry it as many times as i want but the same thing happens. If i finish the installation (even though the error has occurred) the oracle installation doesn't really work . I can't open the Database Configuration Assistant and don't really have a sysdba user. However all the services seem to be running fine (even the tns listener)
I was wondering whether it could be a problem that would be solved with the 9.2.0.3 patch - but this patch assumes that you have performed a proper working installation of 9.2.0.1, so I'm not quite convinced that the problem is related to the oracle version.
I've read other threads where the problem has been read/write privileges on some files and folders, but this shouldn't be an issue when I'm logged onto the machine as a local administrator.
The install.log files don't really provide any extra information.I have exactly the same problem installing Oracle on a Windows Server 2003 X64 Enterprise Edition. I have Intel Xeon processors (EM64T).
I tried to install Oracle for 64 bits, but it didn't work. Now I'm trying to install 32 bits version of Oracle, and I get the same error and the same problem, mentioned above.
Can anyone help us, I can't figure out a way to solve it. I don't know if Oracle for 32 bits is not compatible with that version of Windows, even if it is supposed to be.
Thanks!!!! -
ORA-12546 When connecting without specifying sid in connect string
I am currently having a difficult time connecting to an Oracle 9.2.0.4 database running on Red Hat Linux.
I can successfully connect to this database with sqlplus as oracle whether a sid name is included in the connect string or not. I can also successfully connect to the instance through jdbc with jsp pages. However when I try to connect as root without specifying the sid I get an ORA-12546 TNS: Permission denied. I also receive this error when attempting to connect to the instance through php scripts. Note that root can connect through sqlplus with no problem as long as the sid is included in the connect string. Also note that the oracle user can connect either way.
I turned on tracing and found that this error is occurring before it even gets to the listener as no log or trace entries are generated when the error occurs.
Does anyone have any ideas?did you set the parameter TWO_TASK ?
-
I'm running Oracle 9i on a Windows platform. Using SQL Plus, I have no problem connecting as SYS. But when I try logging in using Oracle Enterprise Manager (OEM), I keep getting the error: ORA-12546: TNS permission denied.
Any help would be appreciated.I have exactly the same problem installing Oracle on a Windows Server 2003 X64 Enterprise Edition. I have Intel Xeon processors (EM64T).
I tried to install Oracle for 64 bits, but it didn't work. Now I'm trying to install 32 bits version of Oracle, and I get the same error and the same problem, mentioned above.
Can anyone help us, I can't figure out a way to solve it. I don't know if Oracle for 32 bits is not compatible with that version of Windows, even if it is supposed to be.
Thanks!!!! -
Hi,
I installed Oracle 10g on Windows 2003.
When it tried to create the database, it gave me the error ORA-12546 TNS:Permission Denied .
Did anybody face the same problem on windows 2003 SP1?
Any help is really appreciated.
Regards,
Ardalan HoushmandI am receiving the same error. I get to in install phase where the Database Cinfoguration Assistant tries to run and I get ora-12546. I am running windows 2003 64 bit, but am installing oracle as a 32 bit since I do not have Itanium and oracle does not have a release for 64 bit xeon. Any suggestion would really help, this new server is replacing an outdated one.
-
TNS-12555: TNS:permission denied
I recently re-installed ORACLE-XE using the increased swap size method below:
dd if=/dev/zero of=/swapfile1 bs=1M count=600
mkswap /swapfile
swapon /swapfile
it works perfectly until I log out and log back in.
Then http://127.0.01:8080/apex gives a connection refused error. It turns out oracle's startdb.sh is dev/null'ing the error message which was:
TNS-12555: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00525: Insufficient privilege for operation
Linux Error: 1: Operation not permitted
All my files in /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin are:
-r-xr-xr-x 1 oracle dba 68948 2006-02-20 06:31 lsnrctl
protected so I've tried using chmod and chgrp and chown but no success!! I did one time get it to work by logging in as oracle. Then apex worked but my (java) application complained that there wasn't enough swap space.
As I said earlier, when I installed oracle xe everything worked fine. tnsnames.ora & listener.ora are fine so that's not the cause. My problem is I know a lot about oracle but I'm fairly new to linux. I'm using SUSE 10.
Can anyone help.
By the way, how can I see if my swap size change survived a reboot?Thanks Werner
It was a problem with access rights to var/tmp/.oracle.
I had first installed XE in January (I could see s#... files from back there in var/tmp/.oracle). Things came unstuck when I increased my pc's memory. So out of frustration I re-installed XE.
Now I finally have it working again.
I had .oracle as
drwxrwxrwt 2 root dba 128 2006-10-21 21:47 .oracle
probably because I ran /etc/init.d/oracle-xe configure as root. Or maybe because I had an old installation.
Thanks a lot for your help.
Allister -
ORA-12545: TNS:name lookup failure ????
Hello.
I installed Oracle805, setup 2 patches.
Now I got such problems:
1. I could login as internal, sys,system via svrmgr. But couldn't
loggin like scott/tiger :((
All this I do logging to linux like Oracle( owner of Oracle :) )
2. Connecting (afteer startup, lsnr start) to Oracle instance
either internal, sys, system or scott shows such error:
SQL*Plus: Release 3.3.2.0.2 - Production on Fri Apr 02 14:25:51
1999
Copyright (c) Oracle Corporation 1979, 1994. All rights
reserved.
ERROR: ORA-12545: TNS:name lookup failure
Enter user-name: scott/tiger@805
ERROR: ORA-12545: TNS:name lookup failure
HELP PLS.
nullANdrey (guest) wrote:
1. I could login as internal, sys,system via svrmgr. But
couldn't loggin like scott/tiger :((
All this I do logging to linux like Oracle( owner of Oracle :)
2. Connecting (after startup, lsnr start) to Oracle instance
like scott only (no any users exist, new DB.)shows such error
ERROR: ORA-01017: invalid username/password; logon denied
HELP PLS.
P.S. In
LSNRCTL> status
extproc
DEDICATED server established:0 refused:0
LOCAL SERVER
DISPATCHER established......
D))) <machine: ..., pid: ...>
(ADDRESS=(PROTOCOL=ipc)(DEV=16)(KEY=#16229.1))
the command coml. successfully
null
Maybe you are looking for
-
NOTE TAB in MIro not transfer to FI document
Hi, Is there a way to configure the copying of MIRO tab note text to FI . We would like to copy these notes to the cheque stub. We have found a way to do it via FB60 to the cheque . IIS BADI AC_DOCUMENT is a potential solution? Thanks
-
Can I download a version of application loader for Snow Leopard?
I'm not able to upgrade to mountain lion at the moment but I need to upload my app. The only version application loader I can find is for 10.7. Right now my operating system is 10.6. I've seen that you can use xcode to submit using the archive but
-
Line 8060 of the INF file\i386\txtsetup.sif
Hi ! I have problems throw the formating.. after partioning the disk...i want to formmat , but i can't do format iwith a sturtup disk... when i write A:>/ format C: (i take) bad command in a dos line (or somthing like this it doesn't work) 2. throw
-
Use Transaction Notification in Approval Procedures
Hi I want to use the "SBO_SP_TransactionNotification" Stored procedure in one of my approval procedures. I have implemented a approval procedure based on certain criteria when a "PURCHASE ORDER" is created. Now i want to send an email out to certain
-
Send email with spool as PDF attachment using class CL_BCS
Hi, I am converting a spool to PDF using the function module CONVERT_OTFSPOOLJOB_2_PDF. The spool contains graphic images etc just like a script output. CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF' EXPORTING src_spoolid