ORA-12560 when installing Oracle 8i R2 on NT

When installing ora816nt the database creation assistant fails (on every machine I try it on.) I had it create the script and have tried to run the commands manually, and run into the following problem:
D:\Oracle\OraHome\BIN>svrmgrl
Oracle Server Manager Release 3.1.6.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter error
SVRMGR>Any ideas?

Hi
Check weather entries are there in the registry.
Go to the services in the control panel and see if the oracle service has started if not start it. If this is up then the registry is OK. if If not u can create it using the oradim utility.
Then set your oracle_sid = <dbname> in the dos prompt and try connecting again.
Let us see what happense

Similar Messages

ORA-12157 when installing Oracle 10g on Fedora 5?

Hi, Im installing Oracle 10g on Fedora 5, I did it once, but when I tried to set it up again I
got this error on the last part of the install...
ORA-12157: TNS: internal network communication error
Anybody know what might cause this?
I think I have installed all required RPMs and set environment variables, kernel parameters,
created oracle users and groups as needed, but still get the above error. I searched the error and some claim it is a problem using newer glibc 2.4.4, so I tried installing on Fedora 4 and had the same error even with glibc 2.3???
Thanks so much,
Jon

Oracle Database 10g Release 2 (10.2.0.1) Installation On Fedora Core 5 (FC5 X86) Step by Step
This is a Server Installation with a minimum of 2G swap, secure Linux disabled and the following package groups installed:
Editors
Graphical Internet
Administration Tools
Base
X Window System
System Tools
Server Configuration Tools
GNOME Desktop Environment
Development Libraries
Development Tools
Legacy Development Support
Legacy Server Support
Alternative installations may require more packages to be loaded, in addition to the ones listed below.
Download Software
Unpack Files
Hosts File
Set Kernel Parameters
Setup
Installation
Post Installation
Download Software
Download the following software:
Oracle Database 10g Release 2 (10.2.0.1) Software
openmotif21-2.1.30-14.i386.rpm
Unpack Files
Unzip the files:
unzip 10201_database_linux32.zipYou should now have a single directory containing installation files. Depending on the age of the download this may either be named "db/Disk1" or "database".
Hosts File
The /etc/hosts file must contain a fully qualified name for the server:
<IP-address> <fully-qualified-machine-name> <machine-name>Set Kernel Parameters
Add the following lines to the /etc/sysctl.conf file:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144Run the following command to change the current kernel parameters:
/sbin/sysctl -pAdd the following lines to the /etc/security/limits.conf file:
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536Add the following line to the /etc/pam.d/login file, if it does not already exist:
session required /lib/security/pam_limits.soDisable secure linux by editing the /etc/selinux/config file, making sure the SELINUX flag is set as follows:
SELINUX=disabledAlternatively, this alteration can be done using the GUI tool (Desktop > System Settings > Security Level). Click on the SELinux tab and disable the feature.
Setup
Install the following packages:
# From Fedora Core 5 DVD
cd /media/dvd/Fedora/RPMS
rpm -Uvh setarch-*
rpm -Uvh --force tcl-*
rpm -Uvh libXp-*
rpm -Uvh openmotif-2*
rpm -Uvh compat-db-*
rpm -Uvh compat-libstdc++-33*
rpm -Uvh compat-libf2c-32-*
rpm -Uvh compat-gcc-32-*
rpm -Uvh libaio-*
rpm -Uvh compat-gcc-32-c++-*
rpm -Uvh compat-libstdc++-296*
rpm -Uvh compat-libgcc-296*
# From download
rpm -Uvh openmotif21-2.1.30-14.i386.rpmCreate the new groups and users:
groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
passwd oracleCreate the directories in which the Oracle software will be installed:
mkdir -p /u01/app/oracle/product/10.2.0/db_1
chown -R oracle.oinstall /u01Login as root and issue the following command:
xhost +<machine-name>Edit the /etc/redhat-release file replacing the current release information (Fedora Core release 5 (Bordeaux)) with the following:
redhat-4Login as the oracle user and add the following lines at the end of the .bash_profile file:
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=TSH1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fiInstallation
Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable:
DISPLAY=<machine-name>:0.0; export DISPLAYStart the Oracle Universal Installer (OUI) by issuing the following command in the database directory:
./runInstallerEnter the appropriate ORACLE_HOME and name then continue with the installation.
During the installation, before the linking phase, edit the contents of the "$ORACLE_HOME/bin/gennttab" file, amending the following entries:
# Change this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
# To this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`If you don't do this the ntcontab will hang indefinitely during the linking phase.
Post Installation
Edit the /etc/redhat-release file restoring the original release information:
Fedora Core release 5 (Bordeaux)Finally edit the /etc/oratab file setting the restart flag for each instance to 'Y':
TSH1:/u01/app/oracle/product/10.2.0/db_1:Y
Ref.: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php

ORA-12560 on installing Oracle 10g v.2 on Windows Server2003 v2

Hi,
Trying to create the database using the dbca(with the default settings) the following errors are displaying:
[Thread-12] [15:29:25] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-12] [15:29:25] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-12] [15:29:25] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-12] [15:29:25] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-12] [15:29:25] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-12] [15:29:25] [StepErrorHandler.setiGNORABLErrors:250] setting Ignorable Error: ORA-01109Thanks, a lot
Sim

Hi Sim
Have you read the following note on metalink?
Doc ID: Note:556639.1
Subject: Seed Database Templates Are Not Replaced by the Installation of 10gR2 Patchset
To solve the issue after the failed installation:
1.
Be sure that the files can be replaced
2.
Copy the files :
a) from other ORACLE_HOME patched with the patchset required as it is recommended at the Note 471765.1
b) from the patchset software
For instance to copy the files from the 10.2.0.3 patchset:
% cd $ORACLE_HOME/assistants/dbca/templates
% cp <patchset_location>/Disk1/stage/Patches/oracle.rdbms.install.seeddb/10.2.0.3.0/1/DataFiles/Expanded/filegroup2 $ORACLE_HOME/assistants/dbca/templates
% jar -xvf <patchset_location>/Disk1/stage/Patches/oracle.rdbms.install.seeddb/10.2.0.3.0/1/Data/Filesfilegroup1.1.1.jar
To avoid the issue before to install the patchset:
Check the permissions of files under $ORACLE_HOME/assistants/dbca/templates and be sure that
oracle user will be able to replace them
regards,
Hub

Tnsnames.ora error when installing oracle 9i developer suite

Hi,
Can anyone answer this question: I recently installed
oracle 9i and i'm getting a tnsnames.ora error when connecting to the database. Can anyone tell me what parameters to modify in the tnsnames.ora and sqlnet.ora files and what values to put in these parameters. Also,
i'm trying to create a net_service_name in oracle net manager(in configuration/management tools) and I can't figure out the service name for versions of Oracle 8i or later. Can someone tell me what this is because the program is asking for a service name. I need this info
for connecting to the database by username/password@net_service_name. Please respond soon.
Thank you.
T. Patel

Go Net8Assistant. Follow the tree Net8Config ->Local -> Service Naming. In this node you will find all instances set (SIDs) and by clicking on them you will see in the right hand part of the screen if they were set or not in tnsnames.ora.
Another way: Usually the database service name is OracleServiceSID. Go Control Panel -> Administrative Tools -> Services and check out the Oracle Service name. Take the SID from there to tnsnames.ora.
You should have write down the name you was asked for while you were installing Oracle (or the default name that the installer put for you).
Hope this will help you
Alexandra

ORA-03113 when installing Oracle 8.1.7

Hi!
I'm trying to install Oracle 8.1.7 Std. Edition on Windows 2000. Whatever I try I always get an ORA-03113 when the wizard tried to initiallize the database. Seems that the TNSListener does something strange.
Who can help me?????
Thanks a lot!
Holger Bothmer
mailto:[email protected]

Hi,
Please check up if any TNSListener (of older version , from previously installed RDBMS ) is already running in the system.
Statup->controlpanel->Services->%TNSListener%.
If so, please Stop the listener,while you install the oracle.
Else, While you install oracle, don't create starter database.First install Oracle, after that, create the DB using "Database configuration Assistant(DCA)", life will be easier!!
Regard
karthik

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0

I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0.
After setting up environment variables, and successfully
accessed KDE interface, everything was going on well.
The process of installation blocked at 80% in "Database Creation
Process" dialog window.
I have tried two times and got the same result.
The error message is:
Warning: Cannot convert string "-*-Kochi Gothic-medium-r-normal-
*-*100...
Help!

I have done some oracle installations over RedHat 7.0 (not certificated):
Let's check some things:
1- You must have changed very few parameters on your shm.h sem.h files which are in /usr/include/linux directory.
2- You need to upgrade the glibc and libstdc libraries (.rpm)
3- You must have installed the jre116_v5 on /usr/jre and made a symbolic link like this
ln -s /usr/jre/jre116_v5 /usr/local/jre
4- You must include in the CLASSPATH parameter the jre116_v5 directory. It should look something like this
CLASSPATH=/usr/jre/jre116_v5:$ORACLE_HOME/jlib
5- Be sure to create and export all the parameters in your .bash_profile.
6- Run the ./runInstaller.sh in a terminal window inside the Xwindow.
You can find the jre116_v5 in www.backdown.org
I hope these tips help you
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by xx:
Hi every body
when I run ./runInstaller from cdrom
I get this messages :
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.Please wait ...
Error in CreateOUIProcess ():-1
: Bad Address
I use JDK-1-1-6.
Thx<HR></BLOCKQUOTE>
null

IOException2 when installing Oracle 9iR2 on Redhat 9

I have problem when installing Oracle 9i release 2 on Redhat 9. When on Disk 2 of oracle, oracle installer hangs and got this message :
I try to translate from French :
The message is pasted from file :installActions*.log
Exception due by action : copyGroupFromJar
Exceotion name : IOException2
Exception string : Error when writing in file :/usr/oracle/produit/920/demo/schema/sales_history/sh_sales.dat
exception level : 2
--

FOR ALL OF YOU GUYS trying to install Oracle 9i R2 on Red Hat 9, PLEASE VISIT THIS LINK - http://www.puschitz.com/InstallingOracle9i.shtml
It has comprehensive instructions on how to install Oracle (various releases,up to 9i Realease 2 on Linux). It takes a bit of effort, but you'll be smiling at the end!

The installer don't run when install oracle 9.2.0.1 on redhat 9 at 41%

The installer don't run when install oracle 9.2.0.1 on redhat 9 at 41%
just installed component of 'oracle intermedia ',the installer don't go on.i wait it pass five hour,but the installer's process still on 41%
my set shmmax 1G and my physics memory is 512m
please help me !

Oracle is NOT certified on RedHat 9, only on RedHat AS 2.1. It is possible to make it work though. Refer to the following web site which has a very good list of problems and work arounds for installing Oracle on RedHat:
www.puschitz.com

Gives ORA-12560: TNS: protocol adapter error when installing oracle 10g

I tried to install oracle 10g r2 in server 2008. but it gives ORA-12560: TNS: protocol adapter error when installing. how I can fix this issue??? please help me ASAP. because its urgent.
thanks in advance.
chamara

Welcome to the forums !
Pl indicate which version of 10g you are installing and on which version of Win 2008. Neither 10gR1 nor 10gR2 are certified to be installed on Win 2008 R1, AFAIK.
For 10gR2, only 10.2.0.5 is certified for Win 2008 R2 - see MOS Doc 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
Also see MOS Doc 740926.1 (Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1?).
Both 10gR1 and 10gR2 are now in extended support - is there a reason you are not using 11gR2 ?
HTH
Srini

ORA-12560 when logging as SYSDBA in 11gR2 db installed in Windows 7

I have installed Oracle 11gR2 in Windows 7. I setup all listener and tnsname file and can login to the database like following:
sqlplus cisadm/cisadm@demo
However, it throws ORA-12560 error when loggin as sysdba as below:
sqlplus / as sysdba
I have read some previous post and already set ORACLE_SID=DEMO. But it still doesn't work.
I wonder if my 11gR2 was not installed properly as I also cannot use Administartion Assistant for Windows which throws "MMC could not create snap-in" error.

This because of previously installed database.
I feel that you have un installed but you have not completely removed Oracle Instances.
After the deinstall from Oracle Installer, Oracle leaves some services still running and some folders which wont be deleted .
You have to manually delete these folders.
Or follow these steps and try.
1) First step is to stop all the services relevant to Oracle database 11g. In windows 7 navigate from Start->Control Panel->Administrative Tools->Services
2) Click on Oracle Service OracleServiceORACLE_SID,OracleDBConsoleOracle_SID,OracleOraDB11g_homeTNSListener and Click on Link stop. Also stop these services if they are enabled - OracleMTSRecoveryService, OracleJobSchedulerOracle_SID
3) Now its time to remove references from Registry. In Windows 7 search box type regedit. This opens the Registry Editor
4) Click on HKEY_LOCAL_MACHINE. Click on Software. Choose Oracle Folder. Delete it completely. Also Remove HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services and remove oracle relevant entries from there (All will have either Oracle or Ora prefix)
5) Remove the PATH variable from environment variables if set
6) Delete the database files manually from the local machine
In this process of deleting files I got an error which said windows process WmiPrvSE.exe process makes use of certain dlls such as oracell11.dll,oraldapclnt11.dll etc. I renamed the bin folder to bin_old. I restarted the system and it fixed the issue
Regards,
Tirumala Dixit.

ORA-01017 error in Database Configuration Assistant when installing Oracle

I am installing Oracle 9i, 9.0.1.1, on an NT Workstation.
When I get to the Database Configuration Assistant step, after the software has been installed, I get an error when the database is being created:
ORA-01017 Invalid Username/Password; Login denied
I have tried several times with different database creations. The first time I got the error was when I did a custom database creation, the other time was when I created a general purpose database, which clones an existing database onto the NT workstation.
The NT system that I am using had an earlier version of Oracle installed on it, which I completely uninstalled.
Any ideas what might be wrong?

Deepak_DBA wrote:
hi,
you might have deleted the instance manually..
oradim -delete -sidHence,
ebrian wrote:
Did you already remove the Windows service associated with the database?

Ora-12560 while installing 10g standard edition tns protocol adaptor error

hi all ,
while i am installing oracle database standard edition on my windows xp , i got this error
ora-12560 tns protocol adaptor error , when i got to the step of
configuration assistants .
-oracle net configuration assistant succeeded , but
oracle database configuration assistant failed unfortunately !!
please help me rapidly , i left the installer on that step until you answer me ,
thanks in advance

semsem wrote:
hi all ,
while i am installing oracle database standard edition on my windows xp , i got this error
ora-12560 tns protocol adaptor error , when i got to the step of
configuration assistants .
-oracle net configuration assistant succeeded , but
oracle database configuration assistant failed unfortunately !!
please help me rapidly , i left the installer on that step until you answer me ,
thanks in advance1) V10 is obsoleted & unsupported
2) I bet that you did not follow Installation Guide & complete all prerequisites.
3) SQL*Net is not required to manage, start, or use local Oracle DB

Error when installing Oracle Identity Manager

Hello,
I'm having a problem when trying to install Oracle Identity Manager. I am trying it now for consecutive two days and it is always the same problem.
I read this thread:
Problem installing Oracle Identity Manager Server (but still have no clue what to do).
I'm installing it in a virtual lab environment (Windows Server 2008 on WMware).
It is a fresh install.
Installing scenario:_
*1.* Oracle Database 10g (10.2.0.3)
*2.* Toad DBA Suite for Oracle
*3.* Oracle Weblogic Server 11g R1
*4.* Oracle Identity Manager v9.1.0.1
*5.*
Then i create a new Oracle database instance for Oracle Identity Manager as described here:
http://download-east.oracle.com/docs/cd/B32386_01/generic.902/b32140/database.htm
*6.*
Then i prepare the DB for Oracle Identity Manager by running:
prepare_xl_db.bat XELL C:\Oracle\product\10.2.0\db_1 xelsysadm password123 xeltbs C:\Oracle\product\10.2.0\oradata xeltbs_01 TEMP password123
as described here (Preparing the Database on Windows):
http://download-east.oracle.com/docs/cd/B32386_01/generic.902/b32140/database.htm
*7.*
I get no errors after running the script has finished
*8.*
Then i run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
*9.*
I go throw the steps and after installing the following error pop ups:
Following Error occurred during schema creation connected*
Error encountered while loading database script*
+...\Oracle Identity Manager v9.1.0.1\OIM9101\installServer\Xellerate/db/oracle/xell.sql+
Contact your DBAORA-06550: line 1, column 7: PLS-00905: object SYSTEM.PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: Statement ignored [10/7/09 12:18 PM]*
*10.*
Then i click next and this message pop ups:
Oracle Identity Manager Installer has found that SetDBKey.bat failed.*
*11.*
Then the setup ends/aborts
Does anybody have any idea what this error is about and how to work around?
I would really appreciated it. I am getting desperate, because i don't know what i am doing wrong. Thank you very much in advance!

daniel/maki,
I'm trying to install Oracle Identity Manager. After giving the inputs for all screen, in the end it give me error "SetDBKey.bat error"
My Products:
1. Oracle Database 10g (10.2)
2. Oracle Application Server 10g R3
3. Oracle Identity Manager v9.1.0.1
My Installation Steps:
1. Installed Oracle Application server and upgraded to 10.3.3
2. Installed Oracle Database 10g and created database idmda2
3. Prepared Database for OIM
prepare_xl_db.bat idmda2 C:\oracle\product\10.2.0\db_1 sysadm sysadm orctbs C:\Oracle\product\10.2.0\oradata orcltbs_01 TEMP test23
I get no errors after running the script has finished
4. Deployed the application XIMDD on OAS
verified for prerequisities
5. Then i run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
At the "Provide databse connectivity information" screen I have used the "sysadm" which i used at the time of preparing the database for oim
I am not using "system" account and still i am getting "Oracle Identity Manager Installer has found that SetDBKey.bat failed" error.
What is that i am missing here?
6. Then the setup ends/aborts
Thank you very much in advance!

Oracle Universal Installer Error when Installing Oracle database Software

Hi Guru's
we are installing SAP ECC 6.0 on Linux:Oracle, we start the installation fine until we reach the oracle software installation step. we login as ora<sid> then set the DISPLAY variable setenv DISPLAY 192.168.1.155:0.0
The csh shell is the one that is being used we find this after executing echo $SHELL, when we execute echo $DISPLAY it returns 192.168.1.155:0.0.
When we run ./RUNINSTALLER it then returns Failed the DISPLAY variable is not set correctly, to check if it working execute xclock, we run that and it displays the clock.
what could be the problem with this installation.

I am trying to install Oracle 10g on Suse Linux and I am getting the
following error...
Checking monitor: must be configured to display atleast 256
colors Failed <<<< >>>> could not execute auto check for display colors
using command /usr/X11R6/bin/xdpyinfo check if DISPLAY variable is set.
I checked the DISPLAY variable and it is set right.

ORA-12560 when installing Oracle 8i R2 on NT

Similar Messages

Maybe you are looking for